ZH
RU
ES
Pengcheng Metal Detection
Pengcheng Metal Detection, Total:500 items.
In the international standard classification, Pengcheng Metal Detection involves: Mining equipment, Production of metals, Testing of metals, Metalliferous minerals, Information sciences. Publishing, Farming and forestry, Earth-moving machinery, Medical equipment, Occupational safety. Industrial hygiene, Non-destructive testing, Power transmission and distribution networks, Measurement of volume, mass, density, viscosity, Pipeline components and pipelines, Construction of waterways and ports, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Mechanical testing, Food products in general, Electrical accessories, Powder metallurgy, Textile fibres, Welding, brazing and soldering, Structures of buildings, Organic chemicals, Analytical chemistry, Metrology and measurement in general, Corrosion of metals, Soil quality. Pedology, Insulating materials, Power stations in general, Equipment for the chemical industry, Shipbuilding and marine structures in general, Construction materials, Fluid storage devices, Thermodynamics and temperature measurements, Industrial automation systems, Jewellery, Non-metalliferous minerals, Water quality, Surface treatment and coating, Protection against dangerous goods, Rubber, Burners. Boilers, Bearings, Industrial trucks, Iron and steel products, Paints and varnishes, Equipment for entertainment, Cutting tools, Valves, Vibrations, shock and vibration measurements, Test conditions and procedures in general, Acoustics and acoustic measurements, Non-ferrous metals, Alarm and warning systems, Nuclear energy engineering, Wastes, Measurement of force, weight and pressure, Services, Products of the textile industry, Standardization. General rules, Vocabularies, Switchgear and controlgear, Elements of buildings, Glass.
YU-JUS, Pengcheng Metal Detection
- JUS C.A4.019-1986 Mechanlcal testing ofmetals. VVrapping test of wire
- JUS H.P8.504-1985 Testing of pesticides. Metal corrosion by pesticide?
- JUS C.A5.062-1989 Metals tests. Determination of resistance to intergranular conosion by Monypenny Strauss test
- JUS C.A4.038-1986 Mechanical testing of metals. Standardized blocks to be med for Vickers hardness testin* machmes (HV 0,2 to HV 100)
- JUS C.A3.012-1985 Testing of metals. Steel — Macrographic examination by sulphurprint (Baumann method)
- JUS C.N2.003-1986 Mechanical testing of meta/s. Sintered metal materials, excluding hardmetals — Unnotched impact test piece
- JUS C.A3.013-1987 Determination ofcontent of non-metallic inclusions in stee/. Micrographic method using standarddiagrams
HU-MSZT, Pengcheng Metal Detection
RO-ASRO, Pengcheng Metal Detection
- STAS 6718-1985 Tests of metals TENSILE TESTING OF TUBES
- STAS 9018-1984 Metal testing TESTING OF DEPOSITED METAL FOR BRAZE WELDING
- STAS 6951-1976 Tests of metals TENSILE TESTING OF WIRE
- STAS 10221-1983 TESTING OF METALS Hot tracking of deposited metal by welding
- STAS 7324-1975 Test of metals STEEL SAMPLING FOR MECHANIGAL TESTING
- STAS 6623-1970 Testing of metals VICKERS HARDNESS TEST WITH LIGHT LOADS
- STAS 9684-1982 CORROSION OF METALS Methods for testing and measuring resistance to corrosion
- STAS 12030/9-1986 GENERAL USE MACHINE-TOOLS FOR METALS CUTTING TEST PIECES FOR ACCURACY CHECKING UP Checking metnods of front knocking
- STAS 6679/20-1986 Metal cutting machine-tools CHECKING METHODS FOR DEVIATION FROM INTERSECTION OF AXES
- STAS 6679/13-1985 Metal-cutting machine-tools HECKING METHODS OF SQUARE- ESS OF THE PATHES OF TWO OVABLE PARTS
- STAS 6679/14-1985 Metal cutt ing machinc-tools METHODS OF TESTING THE QUARENNESS OF AN AXIS TO HE FRONT SURFACE
- STAS 6679/7-1985 Metal cutting machine-tools PARALIELISM OF THE AXIS TO A PLANE CHEKING UP METHODS
- STAS SR ISO 9583:1995 Implants for surgery. Non-destructive testing. Liquid penetrant inspection of metailic surgical implants
- STAS 9181-1989 METAL BOX-PALLETS Rules for quality control, inspection methods, delivery, storage and transport
Henan Provincial Standard of the People's Republic of China, Pengcheng Metal Detection
- DB41/ 770-2012 Specifications for daily inspection and periodic inspection of hoisting systems in metal and nonmetal mines
- DB41/ 771-2012 Specifications for safety inspection and inspection of air compressors in use in metal and nonmetal mines
- DB41/ 772-2012 Specifications for safety inspection and inspection of ventilator systems in use in metal and nonmetal underground mines
Hebei Provincial Standard of the People's Republic of China, Pengcheng Metal Detection
- DB13/T 2807-2018 Specification for inspection and inspection of special equipment for metal and nonmetal underground mines
- DB13/T 2938-2019 Specifications for safety inspection and inspection of belt conveyors in use in metal and nonmetal mines
- DB13/T 2520-2017 Safety inspection and inspection catalog of equipment and facilities with high risk in use in metal and nonmetal mines
- DB13/T 1394.6-2011 Comprehensive Judgment Rules for Safety Inspection and Inspection of Equipment in Use in Metal and Nonmetal Mine Part 6: Mine Blast Hole Drilling Rig
- DB13/T 1394.1-2011 Comprehensive Judgment Rules for Safety Testing and Inspection of Equipment in Use in Metal and Nonmetal Mine Part 1: Auxiliary Winch for Mining
- DB13/T 1394.3-2011 Comprehensive Judgment Rules for Safety Inspection and Inspection of Equipment in Use in Metal and Nonmetal Mine Part 3: Mining Narrow Gauge Electric Locomotives
- DB13/T 1394.2-2011 Comprehensive Judgment Rules for Safety Testing and Inspection of Equipment in Use in Metal and Nonmetal Mine Part 2: Mine Air Compressors
- DB13/T 1394.4-2011 Comprehensive Judgment Rules for Safety Testing and Inspection of Equipment in Use in Metal and Nonmetal Mine Part 4: Belt Conveyor for Mine
- DB13/T 1394.5-2011 Comprehensive Judgment Rules for Safety Testing and Inspection of Equipment in Use in Metal and Nonmetal Mine Part 5: Mining Wheel Loaders
Association of German Mechanical Engineers, Pengcheng Metal Detection
未注明发布机构, Pengcheng Metal Detection
Shandong Provincial Standard of the People's Republic of China, Pengcheng Metal Detection
- DB37/ 1695-2010 Management specifications for daily inspection and periodic inspection of hoisting systems in metal and nonmetal mines
- DB37/T 2386-2013 General requirements for metal and non-metal mine safety production inspection and inspection report
- DB37/T 2853-2016 Specification for safety inspection and inspection of in-service personnel positioning system in metal and nonmetal underground mines
- DB37/T 2482-2014 Specifications for safety inspection and inspection of air compressors in use in metal and non-metal mines in Shandong Province
- DB37/T 2387-2013 Safety inspection and inspection catalog of equipment and facilities with high risk in use in metal and nonmetal mines
- DB37/T 4599-2023 Technical specification for AC electromagnetic field testing of metal structures
Professional Standard-Safe Production, Pengcheng Metal Detection
- AQ 2022-2008 Safety inspecting-testing specification of in-service hoisting winder for metal and nonmetal mine
- AQ/T 2075-2019 Safety inspection and inspection catalog of equipment and facilities in use in metal and nonmetal mines
- AQ/T 2081-2023 Specifications for safety inspection and inspection of belt conveyors in use in metal and nonmetal mines
- AQ 2068-2019 Management specifications for daily inspection and periodic inspection of lifting systems in metal and nonmetal mines
- AQ 2020-2008 Safety inspecting-testing specification of in-service mine drum hoist for metal and nonmetal mines
- AQ 2021-2008 Safety inspecting-testing specification of in-service friction mine hoist for metal and nonmetal mines
- AQ/T 2080-2023 Specification for safety inspection and inspection of in-service personnel positioning system in metal and nonmetal underground mines
- AQ/T 2074-2019 General requirements for safety testing and inspection reports of equipment and facilities in use in metal and nonmetal mines
- AQ/T 2073-2019 Specifications for electrical safety testing and inspection of high-voltage switchgear in use in metal and non-metal mines
- AQ 2019-2008 Safety inspecting-testing specification of parachute in mine shaft hoisting system for metal and nonmetal mines
- AQ 2013.3-2008 VentiIation technical standards for metal and nonmetal underground mines.ventilation system detection
CN-DB 5, Pengcheng Metal Detection
- DB5107/T 120.10-2023 Geographical Indication Product Fucheng Ophiopogon japonicus Part 10: Operating Procedures for Rapid Detection of Heavy Metals (Cadmium)
Japanese Industrial Standards Committee (JISC), Pengcheng Metal Detection
- JIS T 0304:2002 Testing method for metal release from metallic biomaterials
- JIS K 0102-3:2022 Testing methods for industrial water and industrial wastewater -- Part 3: Metals
- JIS Z 2344:1993 General rule of ultrasonic testing of metals by pulse echo technique
Jiangxi Provincial Standard of the People's Republic of China, Pengcheng Metal Detection
- DB36/T 947-2017 Testing regulations for metal and non-metallic underground mine ventilation system
British Standards Institution (BSI), Pengcheng Metal Detection
- BS ISO 23345:2021 Jewellery and precious metals. Non destructive precious metal fineness confirmation by ED-XRF
- BS EN 13480-5:2002 Metallic Industrial Piping - Inspection and testing
- BS EN 13480-5+A1:2002 Metallic industrial piping. Inspection and testing
- BS EN 2002-16:2019 Aerospace series. Metallic materials. Test methods - Non-destructive testing. Penetrant testing
- BS ISO 24497-2:2007 Non-destructive testing - Metal magnetic memory - General requirements
- BS ISO 24497-2:2020 Tracked Changes. Non-destructive testing. Metal magnetic memory. Inspection of welded joints
- BS EN ISO 5579:2013 Non-destructive testing. Radiographic testing of metallic materials using film and X- or gamma rays. Basic rules
- BS ISO 21608:2012 Corrosion of metals and alloys. Test method for isothermalexposure oxidation testing under high-temperature corrosion conditions for metallic materials
- BS EN 60811-202:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General tests. Measurement of thickness of non-metallic sheath
- 23/30405158 DC BS ISO 24489. Non-destructive testing. Acoustic emission testing. Detection of corrosion at atmospheric and low-pressure metallic storage tank floors
- BS ISO 20669:2017 Non-destructive testing. Pulsed eddy current testing of ferromagnetic metallic components
- BS EN 60811-606:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Methods for determining the density
- BS EN 60811-100:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General
- BS ISO 4386-3:2018 Plain bearings. Metallic multilayer plain bearings. Non-destructive penetrant testing
- BS EN 60811-502:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Shrinkage test for insulations
- 20/30414386 DC BS EN 13480-5. Metallic industrial piping. Part 5. Inspection and testing
- BS EN ISO 17635:2016 Tracked Changes. Non-destructive testing of welds. General rules for metallic materials
- BS EN 14584:2013 Non-destructive testing. Acoustic emission testing. Examination of metallic pressure equipment during proof testing. Planar location of AE sources
- BS ISO 4965-1:2012 Metallic materials. Dynamic force calibration for uniaxial fatigue testing. Testing systems
- 15/30330793 DC BS EN 13480-5 AMD3. Metallic industrial piping. Part 5. Inspection and testing
- BS EN ISO 376:2011 Metallic materials. Calibration of force-proving instruments used for the verification of uniaxial testing machines
- BS EN 15495:2007 Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources
- BS EN 1744-8:2012 Tests for chemical properties of aggregates. Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates
- BS ISO 4386-2:2012 Plain bearings. Metallic multilayer plain bearings. Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
International Organization for Standardization (ISO), Pengcheng Metal Detection
- ISO/DIS 24367 Non-destructive testing — Acoustic emission testing — Metallic pressure equipment
- ISO/FDIS 24367:2023 Non-destructive testing — Acoustic emission testing — Metallic pressure equipment
- ISO 24367:2023 Non-destructive testing — Acoustic emission testing — Metallic pressure equipment
- ISO 20669:2017 Non-destructive testing - Pulsed eddy current testing of ferromagnetic metallic components
- ISO/ASTM DTR 52905 Additive manufacturing of metals — Non-destructive testing and evaluation — Defect detection in parts
- ISO/ASTM TR 52905:2023 Additive manufacturing of metals — Non-destructive testing and evaluation — Defect detection in parts
- ISO/DIS 24489 Non-destructive testing — Acoustic emission testing — Detection of corrosion at atmospheric and low-pressure metallic storage tank floors
- ISO/FDIS 24489:2011 Non-destructive testing — Acoustic emission testing — Detection of corrosion at atmospheric and low-pressure metallic storage tank floors
- ISO/CD 17635:2023 Non-destructive testing of welds — General rules for metallic materials
- ISO/DIS 17635:2018 Non-destructive testing of welds — General rules for metallic materials
- ISO 21608:2012 Corrosion of metals and alloys - Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials
- ISO 5173:2009 Destructive tests on welds in metallic materials - Bend tests
- ISO 17635:2016 Non-destructive testing of welds - General rules for metallic materials
- ISO 5173:2023 Destructive tests on welds in metallic materials — Bend tests
- ISO 9223:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation
- ISO 5579:2013 Non-destructive testing.Radiographic testing of metallic materials using film and X- or gamma rays.Basic rules
- ISO 5579:1998 Non-destructive testing - Radiographic examination of metallic materials by X- and gamma-rays - Basic rules
- ISO 15720:2001 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
- ISO 15721:2001 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour
- ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
- ISO/DIS 9584.2 Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants
- ISO/FDIS 9584:2023 Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants
- ISO 9584:2011 Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants
- ISO 24497-1:2020 Non-destructive testing — Metal magnetic memory — Part 1: Vocabulary and general requirements
- ISO/ASTM TR 52906:2022 Additive manufacturing — Non-destructive testing — Intentionally seeding flaws in metallic parts
- ISO 4386-3:1992 Plain bearings; metallic multilayer plain bearings; part 3: non-destructive penetrant testing
- ISO 4386-3:2018 Plain bearings - Metallic multilayer plain bearings - Part 3: Non-destructive penetrant testing
BR-ABNT, Pengcheng Metal Detection
CH-SNV, Pengcheng Metal Detection
Society of Automotive Engineers (SAE), Pengcheng Metal Detection
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Pengcheng Metal Detection
- GB/T 23910-2009 Non-destructive testing.Metal intensifying screens for radiographic testing
- GB/T 26642-2011 Non-destructive testing.Test method for computed radiography of metallic materials
- GB/T 5509-2008 Inspection of grain and oils.Determination of magnetic metals content of flours
- GB/T 19943-2005 Non-destructive testing.Radiographic examination of metallic materials by X-and gamma-rays.Basic rules
- GB/T 41978-2022 Additive manufacturing—Test method for hollow particle ratio of metal powders
- GB/T 19901-2005 Metal thermowells for thermometer sensors.Functional dimensions
- GB/T 5509-1985 Inspection of grain and oilseeds--Methods for determination of magnetic metals content of flours
- GB/T 23909.3-2009 Non-destructive testing.Radioscopic testing.Part 3:General principles of radioscopic testing of metallic materials by X-and gamma rays
- GB/T 12605-2008 Non-destructive testing.Test methods for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes
- GB/T 18182-2000 Acoustic emission examination and evaluation of metallic pressure vessels
- GB/T 18182-2012 Acoustic emission examination and evaluation of metallic pressure vessels
- GB/T 26836-2011 Non-destructive testing instruments.Specification for metal ceramic X-ray tube
- GB/T 17593-1998 Textiles--Test method of heavy metal ions--Atomic absorption spectrophotometry
- GB/T 41739-2022 Test method for dimensional stability of metal matrix composites—Thermal-cold cycling method
- GB/T 18043-2000 Precious metal jewellery content non-damaged test method X-ray fluorescence spectrometry
Professional Standard - Machinery, Pengcheng Metal Detection
- JB/T 10765-2007 Non-destructive testing-Magnetic flux leakage testing of atmospheric pressure metal storage tanks
- JB/T 5075-2004 Metal intensifying screens for non-destructive testing radiography
- JB/T 10765-2023 Non-destructive testing—Magnetic flux leakage testing of atmospheric pressure metal storage tanks
- JB/T 11605-2013 Non-destructive testing instruments.Metal magnetic memory instrument specification
- JB/T 10764-2007 Non-destructive testing-Acoustic emission testing and evaluation of atmospheric pressure metal storage tanks
- JB/T 11606-2013 Non-destructive testing instruments.Metal magnetic memory instrument verification
- JB/T 6646-2007 Determination of physical properties of sintered metal products.Specifications
- JB/T 10231.25-2006 Tool inspection methods Part 25: Metal cutting band saw blades
Sichuan Provincial Standard of the People's Republic of China, Pengcheng Metal Detection
- DB51/ 1177-2010 Specifications for safety inspection and inspection of in-service air compressors in metal and nonmetal underground mines
- DB51/ 1176-2010 Specification for safety inspection and inspection of main drainage system in use in metal and nonmetal underground mines
- DB51/ 1179-2010 Specifications for safety inspection and inspection of main ventilator system in use in metal and nonmetal underground mines
Association Francaise de Normalisation, Pengcheng Metal Detection
- NF A09-172*NF ISO 20669:2017 Non-destructive testing - Pulsed eddy current testing of ferromagnetic metallic components
- NF ISO 20669:2017 Essais non destructifs - Contrôle par courants de Foucault pulsés de compoants métalliques ferromagnétiques
- NF P22-473:1986 Metal construction. Welded assemblies. Ranges of non destructives control.
- NF EN ISO 17635:2017 Contrôle non destructif des assemblages soudés - Règles générales pour les matériaux métalliques
- NF E86-700-5/A1:2013 Metallic industrial piping - Part 5: inspection and testing
- NF A89-500:2010 Non-destructive testing of welds - General rules for metallic materials.
- NF A89-203*NF EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests.
- NF A89-500*NF EN ISO 17635:2017 Non-destructive testing of welds - General rules for metallic materials
- NF A09-320:1984 NON DESTRUCTIVE TESTING. MANUAL ULTRASONIC INSPECTION OF METALLIC PRODUCTS. SIMPLE IN-SERVICE CHECKING OF APPARATUS CHARACTERISTICS.
- NF A09-201*NF EN ISO 5579:2014 Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules
- NF L10-023*NF EN 2002-16:2019 Aerospace series - Metallic materials - Test methods - Part 16 : non-destructive testing - Penetrant testing
- NF EN 2002-16:2019 Série aérospatiale - Matériaux métalliques - Méthodes d'essais - Partie 16 : essais non destructifs - Examen par ressuage
- NF M88-108:2007 Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks.
- NF M88-108:2015 Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks
- NF EN ISO 17639:2022 Essais destructifs des soudures sur matériaux métalliques - Examens macroscopique et microscopique des assemblages soudés
- NF T30-200:1981 Paints. Paints for children. Detection of metals soluble in hydrochloric acid.
- FD CEN ISO/ASTM TR 52906:2022 Fabrication additive - Essais non destructifs - Implantation intentionnelle de défauts dans les pièces métalliques
- NF A09-356*NF EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
- NF P41-033-2*NF EN 15664-2:2010 Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 2 : test waters
- NF EN 17391:2022 Essais non destructifs - Contrôle par émission acoustique - Surveillance en service par émission acoustique des équipements et structures métalliques sous pression - Exigences générales
- FD ISO/TR 17276:2014 Cosmétiques - Approche analytique des méthodes de détection et de quantification des métaux lourds dans les cosmétiques
- NF EN 15856:2010 Essais non destructifs - Émission acoustique - Principes généraux des contrôles par émission acoustique pour la détection de la corrosion dans une enceinte métallique remplie de liquide
- NF EN 13068-3:2002 Essais non destructifs - Contrôle par radioscopie - Partie 3 : principes généraux de contrôle par radioscopie à l'aide de rayons X et gamma des matériaux métalliques
- NF P41-501:1973
Group Standards of the People's Republic of China, Pengcheng Metal Detection
- T/CSTM 00665-2023 Non-destructive testing—Electromagnetic method to test gaps between two metal pieces
- T/ATNT 1-2023 Method for testing the performance of couplant for ultrasonic testing of metal materials
- T/MMAC 006-2022 Detection method of tailings filling in metal mines
- T/CSTM 00821-2022 Metallic reference blocks of ultrasonic testing and eddy current testing for civil aircraft
- T/GDCKCJH 001-2019 Corrosion testing and evaluation of atmospheric pressure metal storage tank floor
- T/CCAS 019-2021 Determination of heavy metals in cement and clinker-ICP-OES method
- T/GAMA 18-2021 Laser Ultrasonic Method for Online Inspection of Metal Additively Manufactured Components
- T/GAMA 21-2021 Water immersion ultrasonic method for off-line inspection of additively manufactured metal components
- T/CGMA 041010-2020 Safety evaluation and detection method of heavy metal indicators for drinking water valves
- T/DZJN 168-2023 Calculation and detection method of recovery rate of valuable metals in waste power batteries
- T/CECS 1162-2022 In-service color-coated profiled metal plate inspection, identification and repair technical regulations
- T/ZJBX 03-2019 On-site hardness testing of metal materials D-type portable leeb hardness testing method
- T/NAHIEM 28-2020 Test Method for Removal of Zearalenone by Nonmetallic Mineral Materials
- T/ZJASE 007-2021 Phased-array ultrasonic testing and safety assessment for electrofusion joint of non-metallic pipe
- T/SZAEM 0001-2021 Dectecting specification for leaching toxicity of heavy metal on municipal solid waste incineration
- T/JMZJXH 015-2023 Detection method for heavy metals and specific substance content in biodegradable tapes
- T/YNBX 081-2023 Rapid determination of heavy metals in soil from agricultural production areas by x-ray fluorescence spectrometry
- T/CES 021-2018 Technical specifications of mechanical vibration detection for gas-insulated metal-enclosure switchgear
国家市场监督管理总局、中国国家标准化管理委员会, Pengcheng Metal Detection
- GB/T 41120-2021 Non-destructive testing—Test method for non-ferromagnetic metallic component pulsed eddy current testing
- GB/T 39789-2021 Non-destructive testing of welds—Eddy current-video integrated testing method of metal composites weld
- GB/T 36212-2018 Non-destructive testing—Acoustic testing method and evaluation for the cement bond of underground metal component
- GB/T 13634-2019 Metallic materials—Calibration of force-proving instruments used for the verification of uniaxial testing machines
- GB/T 36984-2018 X-ray CT testing method of the porous metal materials for surgical implant applications
- GB/T 26642-2022 Non-destructive testing—Industrial computed radiography with storage phosphor imaging plates—General principles for testing of metallic materials using X-rays and gamma rays
- GB/T 41058-2021 Methods for detecting heavy metals in sludge and contaminated soil for cement kiln coprocessing
- GB/T 39794.2-2021 Test method for wind uplift resistance of mental roof—Part 2: Dynamic pressure method
- GB/T 39794.1-2021 Test method for wind uplift resistance of metal roof—Part 1 :Static pressure method
National Metrological Verification Regulations of the People's Republic of China, Pengcheng Metal Detection
Professional Standard - Traffic, Pengcheng Metal Detection
- JT/T 576-2015 Water transport engineering.Nonmetal ultrasonic detector
- JT/T 576-2004 Water transport engineering.Nonmetal ultrasonic detector
American Society for Testing and Materials (ASTM), Pengcheng Metal Detection
- ASTM F382-99(2003) Standard Specification and Test Method for Metallic Bone Plates
- ASTM F382-99(2008) Standard Specification and Test Method for Metallic Bone Plates
- ASTM F382-99(2008)e1 Standard Specification and Test Method for Metallic Bone Plates
- ASTM F458-84(2001) Standard Practice for Nondestructive Pull Testing of Wire Bonds
- ASTM F458-84(1995)e1 Standard Practice for Nondestructive Pull Testing of Wire Bonds
- ASTM F458-13(2018) Standard Practice for Nondestructive Pull Testing of Wire Bonds
- ASTM UOP1003-13 Trace Metals in Methanol by ICP-OES
- ASTM E2001-13 Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts
- ASTM F601-98 Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants
- ASTM UOP389-14 Trace Metals in Organics by ICP-OES
- ASTM E213-14 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
- ASTM E2001-98 Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-Metallic Parts
- ASTM E2001-18 Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts
- ASTM UOP389-86 Trace Metals in Oils by Wet Ash / ICP—AES
- ASTM F2401-16 Standard Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices
- ASTM UOP389-04 Trace Metals in Oils by Wet Ashing and ICP-OES
- ASTM E213-09 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
- ASTM C1785-16a Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
- ASTM E3081-21 Standard Practice for Outlier Screening Using Process Compensated Resonance Testing via Swept Sine Input for Metallic and Non-Metallic Parts
- ASTM E3081-16 Standard Practice for Outlier Screening Using Process Compensated Resonance Testing via Swept Sine Input for Metallic and Non-Metallic Parts
- ASTM E1158-09 Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material
- ASTM E1447-22 Standard Test Method for Determination of Hydrogen in Reactive Metals and Reactive Metal Alloys by Inert Gas Fusion with Detection by Thermal Conductivity or Infrared Spectrometry
- ASTM C1309-97 Standard Practice for Performance Evaluation of In-Plant Walk-Through Metal Detectors
- ASTM C1309-97(2003) Standard Practice for Performance Evaluation of In-Plant Walk-Through Metal Detectors
- ASTM F1468-95 Standard Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search and Screening
- ASTM C1270-97(2021) Standard Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors
- ASTM C1270-97(2012) Standard Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors
- ASTM F601-03 Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants
- ASTM F601-03(2008) Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants
- ASTM F2401-04 Standard Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices
- ASTM C1785-17 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
- ASTM C1785-16 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
German Institute for Standardization, Pengcheng Metal Detection
- DIN 50131:1974 Testing of Metallic Materials; Determination of Shrinkage
- DIN 54233-2:2014 Testing of textiles - Determination of metals - Part 2: Determination of extractable metals by hydrochloric acid
- DIN EN ISO 17635:2017-04 Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016); German version EN ISO 17635:2016
- DIN EN 13480-5/A1:2019-06 Metallic industrial piping - Part 5: Inspection and testing; German version EN 13480-5:2017/A1:2019
- DIN EN 13480-5:2017-12 Metallic industrial piping - Part 5: Inspection and testing; German version EN 13480-5:2017 / Note: To be amended by DIN EN 13480-5/A2 (2020-06).
- DIN 54233-4:2014 Testing of textiles - Determination of metals - Part 4: Determination of extractable metals by synthetic salivary solution
- DIN EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011
- DIN EN 2002-16:2020-02 Aerospace series - Metallic materials - Test methods - Part 16: Non-destructive testing - Penetrant testing; German and English version EN 2002-16:2019
- DIN EN 13068-3:2001-12 Non-destructive testing - Radioscopic testing - Part 3: General principles for the radioscopic testing of metallic materials by X- and gamma rays; German version EN 13068-3:2001
- DIN EN 12972:2018-09 Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks; German version EN 12972:2018 / Note: To be amended by DIN EN 12972/A1 (2023-02).
- DIN EN 12972/A1:2023-02 Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks; German and English version EN 12972:2018/prA1:2023 / Note: Date of issue 2023-01-06*Intended as an amendment to DIN EN 12972 (2018-09).
- DIN EN 17391:2019 Non-destructive testing - Acoustic emission testing - In-service acoustic emission monitoring of metallic pressure equipment and structures - General requirements; German and English version prEN 17391:2019
- DIN EN 17391:2022 Non-destructive testing - Acoustic emission testing - In-service acoustic emission monitoring of metallic pressure equipment and structures - General requirements
- DIN EN 15856:2010-05 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid; German version EN 15856:2010
- DIN EN 17391:2022-08 Non-destructive testing - Acoustic emission testing - In-service acoustic emission monitoring of metallic pressure equipment and structures - General requirements; German version EN 17391:2022
- DIN EN 14584:2013-07 Non-destructive testing - Acoustic emission testing - Examination of metallic pressure equipment during proof testing - Planar location of AE sources; German version EN 14584:2013
- DIN EN 15495:2008-02 Non destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources; German version EN 15495:2007
- DIN CEN ISO/ASTM TR 52906:2022-10 Additive manufacturing - Non-destructive testing - Intentionally seeding flaws in metallic parts (ISO/ASTM TR 52906:2022); German version CEN ISO/ASTM TR 52906:2022
- DIN 50157-2:2008 Metallic materials - Hardness testing with portable measuring instruments operating with mechanical penetration depth - Part 2: Verification and calibration of the testing devices
- DIN EN 13480-5/A1:2019 Metallic industrial piping - Part 5: Inspection and testing (includes Amendment A1:2019)
- DIN 32525-4:1985 Testing of filler metals by means of weld metal specimens; test piece for determining the hardness for surfacing
- DIN ISO 4386-3:2020-04 Plain bearings - Metallic multilayer plain bearings - Part 3: Non-destructive penetrant testing (ISO 4386-3:2018)
- DIN 52327-2:1977 Testing of glass; determination of stresses in glass-to-metal belts sealings
Jilin Provincial Standard of the People's Republic of China, Pengcheng Metal Detection
Chongqing Provincial Standard of the People's Republic of China, Pengcheng Metal Detection
- DB50/T 1407-2023 Newcastle disease virus immunochromatography (colloidal gold) detection technical specification
Indonesia Standards, Pengcheng Metal Detection
- SNI 18-6931-2002 Non-destructive testing radiograpic examination of metallic materials by X-rays and Y-rays - Basic rules
- SNI 01-2896-1998 Test method for metal pollutant in food
- SNI 03-6879-2002 Test methods for pH of soil for use in metal corrosion testing
- SNI ISO 17635:2012 Non-destructive testing of welds - General rules for metallic materials
Shaanxi Provincial Standard of the People's Republic of China, Pengcheng Metal Detection
Professional Standard - Aviation, Pengcheng Metal Detection
- HB 6107-1986 Acoustic resistance detection of metal honeycomb bonded structure
- HB 6108-1986 Acoustic Resonance Detection of Metal Honeycomb Adhesive Structures
- HB 7476-1996 Qualification of metal mechanical performance testing personnel
- HB 6462-1990 Standard test block for acoustic and vibration testing of metal honeycomb bonded structures
- HB 7475-1996 Qualification certification of aviation non-metal performance testing personnel
- HB 20094.3-2012 Test method for determination of wear metals in operating liquid for aviation.Part 3: Energy dispersion X-ray fluorescence spectrometry
- HB 7475-2017 Qualification and certification of aviation non-metal performance testing personnel
- HB 20094.4-2012 Test method for determination of wear metals in operating liquid for aviation.Part 4: Scanning electron microscopy and energy dispersive spectrometry
- HB 7476-2016 Qualification and Certification of Mechanics Testers for Aeronautical Metals
- HB 20094.1-2012 Test method for determination of wear metals in operating liquid for aviation.Part 1: Rotating disc electrode atomic emission spectrometry
American Society of Mechanical Engineers (ASME), Pengcheng Metal Detection
- ASME SEC V B SE-1030-2003 Standard Test Method for Radiographic Examination of Metallic Castings ASTM E 1030-00
- ASME SEC V A-12-2001 Article 12 Acoustic Emission Examination of Metallic Vessels During Pressure Testing
- ASME N-601-2001 Extent and Frequency of VT-3 Visual Examination for Inservice Inspection of Metal Containments Section XI, Division 1
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Pengcheng Metal Detection
- GB/T 34628-2017 Non-destructive testing of welds—General rules for metallic materials
- GB/T 33207-2016 Non-destructive testing—Test method for the accumulation of oxide scale in the metal tube in service by magnetic testing
- GB/T 35385-2017 Non-destructive testing—Practice for electromagnetic (eddy-current) sorting of ferrous metals
- GB/T 35393-2017 Non-destructive testing—Practice for electromagnetic (eddy-current) sorting of nonferrous metals
- GB/T 31566-2015 Metallic coatings—Physical vapour-deposited coatings of aluminium—Specification and test methods
Universal Oil Products Company (UOP), Pengcheng Metal Detection
RU-GOST R, Pengcheng Metal Detection
- GOST 8.398-1980 State system for ensuring the uniformity of measurements. Hardness testing machines for metals and alloys. Methods and means of verification
- GOST 8.044-1980 State system for ensuring the uniformity of measurements. Diamond indentors of the hardness testing machines for metal and alloys. Verification methods and means
- GOST 27333-1987 Nondestructive testing. Measurement of electrical conductivity of nonferrous metals by eddy current method
- GOST 24507-1980 Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection
- GOST R 55806-2013 Non-destructive testing. Ultrasound measurement of bonding strength of layers in bimetal. General requirements
- GOST R 55042-2012 Non-destructive testing. Evaluation of metallic coating thickness by ultrasound. General requirements
BE-NBN, Pengcheng Metal Detection
- NBN EN ISO 4524-6:1995 Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 6: Determination of the presence of residual salts (ISO 4524-6:1988)
- NBN I 07-005-1986
European Committee for Standardization (CEN), Pengcheng Metal Detection
- EN 1321:1996 Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds
- EN 13480-5:2002 Metallic industrial piping - Part 5: Inspection and testing
- EN 13480-5:2012 Metallic industrial piping - Part 5: Inspection and testing
- EN 13480-5:2017 Metallic industrial piping - Part 5: Inspection and testing
- prEN ISO 17635 rev Non-destructive testing of welds - General rules for metallic materials
- FprCEN ISO/ASTM TR 52905 Additive manufacturing of metals - Non-destructive testing and evaluation - Defect detection in parts (ISO/ASTM DTR 52905:2023)
- CEN ISO/ASTM TR 52905:2023 Additive manufacturing of metals - Non-destructive testing and evaluation - Defect detection in parts (ISO/ASTM TR 52905:2023)
- EN ISO 5579:2013 Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules
- FprEN 17391-2020 Non-destructive testing - Acoustic emission testing - In-service acoustic emission monitoring of metallic pressure equipment and structures - General requirements
- prEN 2002-4-1978 Test methods for metallic materials; part 4: calibration of dynamometric calibration devices; aerospace series
- EN 13068-3:2001 Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays
- EN ISO/TR 16060:2014 Destructive tests on welds in metallic materials - Etchants for macroscopic and microscopic examination
- EN 13480-5:2012/A1:2013 Metallic industrial piping - Part 5: Inspection and testing
- EN 13480-5:2017/A2:2017 Metallic industrial piping - Part 5: Inspection and testing
- EN 13480-5:2017/A3:2017 Metallic industrial piping - Part 5: Inspection and testing
- EN 13480-5:2017/A2:2021 Metallic industrial piping - Part 5: Inspection and testing
- EN ISO 5173:2023 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
- EN ISO 5173:2010 Destructive tests on welds in metallic materials - Bend tests (Incorporates Amendment A1: 2011)
Korean Agency for Technology and Standards (KATS), Pengcheng Metal Detection
- KS B ISO 24497-3-2008(2013) Non-destructive testing－Metal magnetic memory－Part 3：Inspection of welded joints
- KS D 0003-1963(2016) General rules of test and inspection for base metals
- KS B ISO 24497-1-2008(2013) Non-destructive testing－Metal magnetic memory－Part 1：Vocabulary
- KS D ISO 11873:2021 Hardmetals — Determination of sulfur and carbon contents in cobalt metal powders — Infrared detection method
- KS D ISO 11873-2011(2016) Hardmetals－Determination of sulfur and carbon contents in cobalt metal powders－Infrared detection method
- KS B ISO 17635:2021 Non-destructive testing of welds — General rules for metallic materials
- KS B ISO 24497-2-2008(2013) Non-destructive testing－Metal magnetic memory－Part 2：General requirements
- KS P ISO 9583-2009(2019) Implants for surgery－Non-destructive testing－Liquid penetrant inspection of metallic surgical implants
- KS M 6584-2008 Standard test method for rubber－Determination of metal content by Flame Atomic Absorption(AAS) analysis
- KS D 0295-2009 Visual inspection and hardness test for selective corrosion of alloys
- KS B ISO 5579-2016(2021) Non－destructive testing－Radiographic examination of metallic materials by X－and gamma－rays－Basic rules
- KS P ISO 9584-2009(2019) Implants for surgery－Non-destructive testing－Radiographic examination of cast metallic surgical implants
- KS B ISO 4386-3:2005 Plain bearings－Metallic multilayer plain bearings－Part 3：Non－destructive penetrant testing
- KS B 0817-2016 General rule of ultrasonic testing of metals by pulse echo technique
- KS B 0817-2021 General rules for ultrasonic testing of metals by pulse echo technique
- KS B 0817-1986 General rules for ultrasonic testing of metals by pulse echo technique
SE-SIS, Pengcheng Metal Detection
- SIS SS-ISO 7441:1989 Corrosion of metals and alloys — Determination of bimetallic corrosion in outdoor exposure corrosion tests
- SIS SS IEC 250:1982 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
- SIS SS IEC 248:1988 Nuclear instrumen ta tion — Dimensions of planchets usedin nuclear electronic instruments
工业和信息化部, Pengcheng Metal Detection
- JB/T 13767-2020 Non-destructive testing of welds Ultrasonic testing of laser welded lap joints of metal sheets
- JB/T 13471-2018 Non-destructive testing method for online electromagnetic monitoring of metal abrasive particles in oil
- YS/T 1130-2016 Method for detecting welding cracks in sintered metal porous materials
AT-ON, Pengcheng Metal Detection
- ONORM M 3003-1994 Ultrasonic testing of metallic Compound piain bearings
- ONORM EN 10002-2-1993 Metalhc materials - Tensile test - Part 2: Venfication of the force measuring system of the tensile testing machines
Professional Standard - Electricity, Pengcheng Metal Detection
- DL/T 370-2010 Metal magnetic memory testing of welded joint on pressure equipment
- DL/T 1801-2018 Phased array ultrasonic testing of welded joints of hydropower metal structures and equipment
- DL/T 821-2017 Radiographic Inspection Technology and Quality Grading of Metal Fusion Welded Butt Joints
- DL/T 2220-2021 Technical regulations for instrumented indentation method testing of mechanical properties of metal materials in power stations
Professional Standard - Chemical Industry, Pengcheng Metal Detection
PL-PKN, Pengcheng Metal Detection
- PN M55669-1957 METAL WORKING MACHINE VERTICAL MILLING MACHINES TESTING OF ACCURACY
- PN C04153-1969 Petroleum producH. Iiw?s?igation of tendency to slip down the lubrlcatlng greai from metcllic lurface
Professional Standard-Ships, Pengcheng Metal Detection
ES-UNE, Pengcheng Metal Detection
- UNE-EN 13480-5:2017/A2:2021 Metallic industrial piping - Part 5: Inspection and testing (Endorsed by Asociación Española de Normalización in November of 2021.)
- UNE-EN 13480-5:2017/A1:2019 Metallic industrial piping - Part 5: Inspection and testing (Endorsed by Asociación Española de Normalización in September of 2019.)
- UNE-EN 2002-16:2019 Aerospace series - Metallic materials - Test methods - Part 16: Non-destructive testing - Penetrant testing (Endorsed by Asociación Española de Normalización in January of 2020.)
- UNE-EN 12972:2019 Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks
- UNE-EN 17391:2023 Non-destructive testing - Acoustic emission testing - In-service acoustic emission monitoring of metallic pressure equipment and structures - General requirements
- UNE-EN 14584:2013 Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources
- UNE-CEN ISO/ASTM/TR 52906:2022 Additive manufacturing - Non-destructive testing - Intentionally seeding flaws in metallic parts (ISO/ASTM/TR 52906:2022) (Endorsed by Asociación Española de Normalización in July of 2022.)
CZ-CSN, Pengcheng Metal Detection
KR-KS, Pengcheng Metal Detection
- KS D ISO 11873-2021 Hardmetals — Determination of sulfur and carbon contents in cobalt metal powders — Infrared detection method
- KS B ISO 17635-2021 Non-destructive testing of welds — General rules for metallic materials
- KS B 0817-2016(英文版) General rule of ultrasonic testing of metals by pulse echo technique
IN-BIS, Pengcheng Metal Detection
Danish Standards Foundation, Pengcheng Metal Detection
- DS/EN ISO 17635:2010 Non-destructive testing of welds - General rules for metallic materials
- DS/EN 444:1994 Non-destructive testing-General principles for radiographic examination of metallic materials by X-and gamma-rays
- DS/EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
- DS/EN 13068-3:2001 Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays
GOSTR, Pengcheng Metal Detection
Guangxi Provincial Standard of the People's Republic of China, Pengcheng Metal Detection
- DB45/T 1751-2018 Specification for low-frequency electromagnetic detection of atmospheric pressure metal storage tank bottom plate
Anhui Provincial Standard of the People's Republic of China, Pengcheng Metal Detection
- DB34/T 2390-2015 Inspection regulations for metal parts of steam turbines in thermal power plants
- DB34/T 3195-2018 Testing rules for the four metal parts of generators in thermal power plants
Professional Standard - Light Industry, Pengcheng Metal Detection
- QB/T 2855-2007 Jewellery-Nondestructive quantitative determination of precious metal-Consistency syntheses method
Lithuanian Standards Office , Pengcheng Metal Detection
- LST EN ISO 17635:2010 Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2010)
- LST EN 15856-2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
- LST EN 14584-2005 Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources
- LST EN 13068-3-2002 Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays
AENOR, Pengcheng Metal Detection
- UNE-EN ISO 17635:2017 Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016)
- UNE-EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
- UNE-EN 13068-3:2002 NON-DESTRUCTIVE TESTING - RADIOSCOPIC TESTING - PART 3: GENERAL PRINCIPLES OF RADIOSCOPIC TESTING OF METALLIC MATERIALS BY X-AND GAMMA RAYS.
Professional Standard - Geology, Pengcheng Metal Detection
- DZ/T 0064.78-1993 Determination of Deuterium by Metal Zinc Reduction Method for Groundwater Quality
Taiwan Provincial Standard of the People's Republic of China, Pengcheng Metal Detection
- CNS 3791-1999 Method of test for metal in canned food-Determination of tin
Standard Association of Australia （SAA）, Pengcheng Metal Detection
- AS 2177:2006/Amdt 1:2014
- AS 4544:2005 Non-destructive testing - Eddy current testing for the detection of surface flaws - Ferromagnetic and non-ferromagnetic metallic products
- AS 2168.2:2009
- ISO 9584:2023 Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants
- AS 2177.1:1994 Non-destructive testing - radiography of welded butt joints in metal Part 1: Methods of test
国家能源局, Pengcheng Metal Detection
- SY/T 7464-2020 Technical standards for welding and non-destructive testing of corrosion-resistant alloy bimetallic composite pipes
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Pengcheng Metal Detection
- PREN 2002-16-1999 Aerospace Series Metallic Materials Test Methods Non-Destructive Testing Part 16: Penetrant Testing (Edition P1)
- PREN 2002-16-2000 Aerospace Series Metallic Materials Test Methods Part 16: Non-Destructive Testing Penetrant Testing (Edition P 1)
ZA-SANS, Pengcheng Metal Detection
- SANS 394:2004 Non-destructive testing - Radiographic examination of metallic materials by X- and gamma-rays - Basic rules
Professional Standard - Railway, Pengcheng Metal Detection
- TB/T 2984-2000 Penetration non-destructive testing of sliding bearing metal multilayer sliding bearing
National Metrological Technical Specifications of the People's Republic of China, Pengcheng Metal Detection
交通运输部, Pengcheng Metal Detection
- JT/T 1074-2016 Specifications for crack detection and maintenance of metal structures of port cranes
CEN - European Committee for Standardization, Pengcheng Metal Detection
- PREN 17391-2019 Non-destructive testing - Acoustic emission testing - In-service acoustic emission monitoring of metallic pressure equipment and structures - General requirements
- EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
- EN 14584:2005 Non-destructive testing - Acoustic emmission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources
SAE - SAE International, Pengcheng Metal Detection
- SAE AS4787-1992 Eddy Current Inspection of Circular Holes in Nonferrous Metallic Aircraft Engine Hardware
IT-UNI, Pengcheng Metal Detection
- UNI 3251-1952
- UNI 7604-1976 Examination with electron microscope of metallic materials by the replica technique. Preparation of replicas for microfractography examination.
- UNI 7329-1974 Examination with electron microscope of metallic materials by the replica technique. Preparation of replicas for microstructure examination.
FI-SFS, Pengcheng Metal Detection
ATIS - Alliance for Telecommunications Industry Solutions, Pengcheng Metal Detection
- T1.TR.43-1995 Algorithms for Load Coil Detection on Metallic Pairs Assigned to Digital Subscriber Lines
Professional Standard - Urban Construction, Pengcheng Metal Detection
- GB/T 51422-2021 Technical standards for detection, identification and reinforcement of building metal plate enclosure systems
Professional Standard - Recommended Standards for Engineering Construction, Pengcheng Metal Detection
- CECS 70-1994 STANDARD OF INSPECTION AND MEASUREMENT OF RAY PHOTOGRAPHING FOR METAL MELTING MELD SEAM OF BUILDING INSTALLATION ENGINEERING
NL-NEN, Pengcheng Metal Detection
- NEN-ISO 4003:1993 Permeable sintered metal materials. Determination of bubble test pore size (ISO 4003:1977)
Professional Standard - Commodity Inspection, Pengcheng Metal Detection
- SN/T 3553-2013 Codes of heavy metal and pesticide residues test for ballast water on international ships
Guizhou Provincial Standard of the People's Republic of China, Pengcheng Metal Detection
- DB52/T 1695-2022 Technical requirements and detection methods of heavy metal water quality automatic online monitoring system (ICP-MS method)