ZH
RU
ES

Calculation of Detection Error

Calculation of Detection Error, Total:158 items.

In the international standard classification, Calculation of Detection Error involves: Electricity. Magnetism. Electrical and magnetic measurements, Electromagnetic compatibility (EMC), Solar energy engineering, Linear and angular measurements, Shipbuilding and marine structures in general, Quality, Animal feeding stuffs, Power transmission and distribution networks, Medical sciences and health care facilities in general, Products of the textile industry, Coatings and related processes used in aerospace industry, Paints and varnishes, Measurement of fluid flow, Optics and optical measurements, Metrology and measurement in general, Measurement of volume, mass, density, viscosity, Equipment for the chemical industry, Petroleum, petroleum products and natural gas handling equipment, Nuclear energy engineering, Non-destructive testing, IT terminal and other peripheral equipment, Coals, Microbiology, Water quality, Lifting equipment, General methods of tests and analysis for food products, Spices and condiments. Food additives, Continuous handling equipment, Integrated circuits. Microelectronics, Leather technology.

Professional Standard - Electricity, Calculation of Detection Error

DL/T 731-2000 Error calculator used in electrical energy meter calibrating

American National Standards Institute （ANSI), Calculation of Detection Error

ANSI C63.6-1996 Guide for the Computation of Errors in Open-Area Test Site Measurements
ASNI C63.6-1996 Guide for the Computation of Errors in Open-Area Test Site Measurements
ANSI/ASTM E1544:1994 Practice for Construction of a Stepped Block and Its Use to Estimate Errors Produced by Speed-of-Sound Measurement Systems for Use on Solids

Association Francaise de Normalisation, Calculation of Detection Error

NF X10-106:1983 Mesure de débit des fluides - Calcul de l'erreur limite sur une mesure de débit
NF X06-047:1986 Application of statistical. Treatment of measured results. Errors estimation from interlaboratory comparaisons.
NF X06-046:1985 Application of statistics. Treatment of measurement results. Errors propagation.
NF EN ISO 10360-6:2002 Spécification géométrique des produits (GPS) - Essai de réception et de vérification périodique des machines à mesurer tridimensionnelles (MMT) - Partie 6 : estimation des erreurs dans le calcul des éléments associés Gaussiens
NF EN ISO 105-J03:2009 Textiles - Essais de solidité des teintures - Partie J03 : calcul des écarts de couleur
NF M01-006:1967 Solid mineral fuels. Sampling methods for hard coal and lignites. Methods to detect the existence of systematic errors.
NF P82-950*NF EN 81-50:2020 Safety rules for the construction and installation of lifts - Examinations and tests - Part 50 : design rules, calculations, examinations and tests of lift components

Institute of Electrical and Electronics Engineers (IEEE), Calculation of Detection Error

IEEE Std C63.6-1996 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements
IEEE Std C63.6-1988 Guide for the computation of errors in open-area test site measurements
ANSI Std C63.6-1996 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements
IEEE/ANSI C63.6-1996 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements
ANSI Std C63.6-1988 American National Standard Guide for electromagnetic compatibility--open-area test site measurements--guide for the computation of errors
IEEE/ANSI C63.6-1988 American National Standard Guide for electromagnetic compatibility--open-area test site measurements--guide for the computation of errors

Society of Automotive Engineers (SAE), Calculation of Detection Error

SAE AIR1608-1994 ESTIMATION OF TOTAL ERROR IN ALTIMETRY
SAE AIR1608A-2008 Estimation of Total Error in Altimetry
SAE AIR1608B-2020 Estimation of Total Error in Altimetry
SAE AMS2432C-2007 Shot Peening, Computer Monitored

SAE - SAE International, Calculation of Detection Error

SAE AIR1608-1989 Estimation of Total Error in Altimetry

International Electrotechnical Commission (IEC), Calculation of Detection Error

IEC 60904-7:1995 Photovoltaic devices - Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic device
IEC 60904-7:1998 Photovoltaic devices - Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic device

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Calculation of Detection Error

IEEE C63.6-1996 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements
IEEE C63.6-1988 Standard for Electromagnetic Compatibility - Open - Area Test Site Measurements - Guide for the Computation of Errors

AT-ON, Calculation of Detection Error

ONORM S 5250-1/AC1-1998 Counting statistics in radioactivity measurements (Corrigendum)
ONORM S 7012-1982 Testing of leather; determination of pH-value and difference figure of an aqueous extract of leather

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Calculation of Detection Error

GB/T 16857.6-2006 Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 6: Estimation of errors in computing Gaussian associated features
GB/T 18823-2002 Allowable error for judge of quality testing results in feeds
GB/T 18823-2010 Permitted tolerants for judgement of testing results in feeds
GB/T 6495.7-2006 Photovoltaic devices. Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic device
GB/T 18823-2002(XG1-2003) Allowable error for judge of quality testing results in feeds AMD 1
GB/T 11186.3-1989 Methods for measuring the colour of paint films--Part 3:Calculation of colour differences
GB 11186.3-1989 Measurement method of coating film color Part 3 Calculation of color difference
GB/T 21355-2008 Non-destructive testing.Classification of computed radiology systems
GB/T 25759-2010 Non-destructive testing.Guide for data fields for computerized transfer of digital ultrasonic examination data

Professional Standard-Ships, Calculation of Detection Error

CB*/Z 178-1980 Calculation and Inspection Method of Torque, Backlash and Transmission Error of Precision Gear Transmission Chain

Indonesia Standards, Calculation of Detection Error

SNI IEC 60904-7:2011

National Metrological Verification Regulations of the People's Republic of China, Calculation of Detection Error

JJG(铁道) 162-1996 The Rules of Error for Specifical Measuring Standards of Railway

Hunan Provincial Standard of the People's Republic of China, Calculation of Detection Error

DB43/T 1997-2021 Technical Specifications for Integral Error Detection of Digital Electric Energy Metering Devices

Professional Standard - Hygiene , Calculation of Detection Error

WS/T 409-2013 Estimation of total analytical error for clinical laboratory methods

Korean Agency for Technology and Standards (KATS), Calculation of Detection Error

KS B ISO 10360-6:2014 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 6: Estimation of errors in computing Gaussian associated features
KS B ISO 10360-6:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring achines(CMM)-Part 6:Estimation of errors in computing Gsussian associated features
KS B ISO 10360-6:2019 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 6: Estimation of errors in computing Gaussian associated features
KS K ISO 105-J03-2014(2021) Textiles — Tests for colour fastness — Part J03: Calculation of colour differences

International Organization for Standardization (ISO), Calculation of Detection Error

ISO 10360-6:2001 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features
ISO 105-J03:1995/Cor 2:2006 Textiles - Tests for colour fastness - Part J03: Calculation of colour differences; Technical Corrigendum 2
ISO 105-J03:1995/Cor 1:1996 Textiles - Tests for colour fastness - Part J03: Calculation of colour differences; Technical Corrigendum 1
ISO 10360-6:2001/cor 1:2007 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features; Technical Corrigendum 1
ISO 8423:1991/Cor 1:1993 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation); technical corrigendum 1

CENELEC - European Committee for Electrotechnical Standardization, Calculation of Detection Error

EN 60904-7:1998 Photovoltaic Devices Part 7: Computation of Spectral Mismatch Error Introduced in the Testing of a Photovoltaic Device

Japanese Industrial Standards Committee (JISC), Calculation of Detection Error

JIS Z 9041-2 ERRATUM 1:2000 Statistical Interpretation of Data Part 2: Techniques of estimation and test relating to means and variancesStatistical Interpretation of Data Part 2: Techniques of estimation and test relating to means and variances (Erratum 1)
JIS K 5600-4-6 ERRATUM 1:2002 Testing methods for paints -- Part 4: Visual characteristics of film -- Section 6: Colorimetry (Calculation of colour differences) (Erratum 1)
JIS B 7440-6:2004 Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 6: Estimation of errors in computing Gaussian associated features
JIS K 0350-20-10:2001 Testing methods for detection and enumeration of coliform organisms in industrial water and waste water
JIS Z 9041-2:1999 Statistical interpretation of data Part 2: Techniques of estimation and test relating to means and variances

Professional Standard - Petroleum, Calculation of Detection Error

SY 6826-2011 Computational inspection of liquid pipelines

American Gear Manufacturers Association, Calculation of Detection Error

AGMA 10FTM10-2010 Evaluation of Methods for Calculating Effects of Tip Relief on Transmission Error, Noise and Stress in Loaded Spur Gears

CU-NC, Calculation of Detection Error

NC 90-00-17-1987 Metrological Assurance. Methods for Expressinq Measurement Errors and Ways for Representing the Results

British Standards Institution (BSI), Calculation of Detection Error

BS 3900-D10:1986 Methods of test for paints. Determination of colour and colour difference: calculation
BS EN ISO 10360-6:2001 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Estimation of errors in computing Gaussian associated features
BS EN ISO 10360-6:2002 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Estimation of errors in computing Gaussian associated features
BS EN 12780:2002 Water quality - Detection and enumeration of Pseudomonas aeruginosa by membrane filtration
20/30390427 DC BS EN 12101-13. Smoke and heat control systems. Part 13. Pressure differential systems (PDS). Design and calculation methods, installation, acceptance testing, routine testing and maintenance

IT-UNI, Calculation of Detection Error

German Institute for Standardization, Calculation of Detection Error

DIN EN ISO 10360-6:2009 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001+Cor. 1:2007); English version of DIN EN ISO 1
DIN 51612:1980-06 Testing of liquefied petroleum gases; calculation of net calorific value
DIN EN 1808 Berichtigung 1:2017 Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests; German version EN 1808:2015, Corrigendum to DIN EN 1808:2015-08
DIN 51733:2016-04 Testing of solid mineral fuels - Ultimate analysis and calculation of oxygen content
DIN 51900:2022-06 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value / Note: Date of issue 2022-05-06*Intended as replacement for DIN 51900-1 (2000-04), DIN 51900-1 Berichtigung 1 (20...
DIN 51640:1989-06 Testing of liquified petroleum gases; calculation of vapour pressure at 40 °C and 70 °C
DIN 51618:1989-06 Testing of liquefied petroleum gases; calculation of density at 15 °C, 20 °C and 50 °C
DIN EN 1808:2015-08 Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests; German version EN 1808:2015
DIN EN 1808 Berichtigung 1:2017-06 Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests; German version EN 1808:2015, Corrigendum to DIN EN 1808:2015-08
DIN EN 81-50:2020 Safety rules for the construction and installation of lifts - Examinations and tests - Part 50: Design rules, calculations, examinations and tests of lift components
DIN 53308:1968 Testing of leather; determination of the contents of total nitrogen and of ammonium salts, calculation of hide substance
DIN EN 12101-13:2020 Smoke and heat control systems - Part 13: Pressure differential systems (PDS) - Design and calculation methods, acceptance testing, maintenance and routine testing of installation; German and English version prEN 12101-13:2020

HU-MSZT, Calculation of Detection Error

Standard Association of Australia （SAA）, Calculation of Detection Error

AS 3778.2.4:2007 Measurement of water flow in open channels - General - Estimation of uncertainty of a flow rate measurement
AS/NZS 1580.601.4:1994 Paints and related materials - Methods of test - Colour - Calculation of colour differences
AS/NZS CISPR 16.4.4:2004 Specification for radio disturbance and immunity measuring apparatus and methods - Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits
AS/NZS CISPR 16.4.1:2006 Specification for radio disturbance and immunity measuring apparatus and methods - Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests

Danish Standards Foundation, Calculation of Detection Error

DS/EN ISO 10360-6/Corr. 1:2007 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features
DS/EN ISO 10360-6:2002 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features
DS/EN ISO 8655-6/AC:2009 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error
DS/EN ISO 8655-6:2002 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error

KR-KS, Calculation of Detection Error

KS B ISO 10360-6-2019 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 6: Estimation of errors in computing Gaussian associated features

ES-UNE, Calculation of Detection Error

UNE-EN ISO 10360-6:2002/AC:2009 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)
UNE-EN 1808:2016 Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests

未注明发布机构, Calculation of Detection Error

BS EN ISO 10360-6:2001(2008) Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 6 : Estimation of errors in computing Gaussian associated features

American Society for Testing and Materials (ASTM), Calculation of Detection Error

ASTM D2244-15 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-15a Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-16 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E2862-18 Standard Practice for Probability of Detection Analysis for Hit/Miss Data
ASTM D2244-23 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-09a Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-93(2000) Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
ASTM D2244-21 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-22 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-15e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-07e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-09 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-02 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-02e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-05 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-07 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-09b Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-11 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E2006-05 Standard Guide for Benchmark Testing of Light Water Reactor Calculations
ASTM D6091-07(2014) Standard Practice for 99?%/95?% Interlaboratory Detection Estimate 40;IDE41; for Analytical Methods with Negligible Calibration Error
ASTM D2244-14 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM F1174-01(2006) Standard Practice for Using a Personal Computer Printer as a Test Instrument
ASTM F1174-01 Standard Practice for Using a Personal Computer Printer as a Test Instrument
ASTM F1175-88(1996)e1 Standard Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison
ASTM F1175-88(2001) Standard Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison
ASTM F1175-88(2006) Standard Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison
ASTM F1174-12 Standard Practice for Using a Personal Computer Printer as a Test Instrument
ASTM D6091-03 Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error
ASTM D6091-97 Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error
ASTM D6091-07 Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error

RO-ASRO, Calculation of Detection Error

STAS 6880/3-1988 Colorimetry REFLECTION COLORIMETRY Calculation of colour differences

RU-GOST R, Calculation of Detection Error

GOST R 8.882-2015 State system for ensuring the uniformity of measurements. The volume of natural gas. Method of error calculations in measurements of natural gas volume at reference conditions. Basic principles
GOST R 52857.11-2007 Vessels and apparatus. Norms and methods of strength calculation. Method of strength calculation of shells and heads according to weld misalignment, angular misalignment and shell nonroundness
GOST R 56139-2014 Functional foods. Methods for detection and enumeration of probiotic microorganisms

AGMA - American Gear Manufacturers Association, Calculation of Detection Error

10FTM10-2010 Evaluation of Methods for Calculating Effects of Tip Relief on Transmission Error@ Noise and Stress in Loaded Spur Gears
2000-A88-1988 Gear Classification and Inspection Handbook Tolerances and Measuring Methods for Unassembled Spur and Helical Gears (Including Metric Equivalents) (Errata - 01/90; Errata - 07/90; Errata - 05/92)

FI-SFS, Calculation of Detection Error

SFS 3305-1978

US-AATCC, Calculation of Detection Error

AATCC 173-1998 CMC: Calculation of Small Color Differences for Acceptability

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Calculation of Detection Error

ASHRAE DA-07-064-2007 Predicting Individual Differences in Human Thermal Strain Using Computational Models

Taiwan Provincial Standard of the People's Republic of China, Calculation of Detection Error

CNS 13059.7-2002 Photovoltaic devices Part 7:Computation of spectral mismatch error introduced in the testing of a photovoltaic device
CNS 13059-7-2002 Photovoltaic devices Part 7:Computation of spectral mismatch error introduced in the testing of a photovoltaic device

European Committee for Standardization (CEN), Calculation of Detection Error

EN ISO 10360-6:2001 Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 6: Estimation of Errors in Computing Gaussian Associated Features ISO 10360-6: 2001
EN ISO 105-J03:1997 Textiles - Tests for Colour Fastness - Part J03: Calculation of Colour Differences ISO 105-J03: 1995, Including Technical Corrigendum 1: 1996
EN ISO 10360-6:2001/AC:2008 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)

Lithuanian Standards Office , Calculation of Detection Error

LST EN ISO 10360-6:2002 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001)
LST EN ISO 105-J03:2010 Textiles - Tests for colour fastness - Part J03: Calculation of colour differences (ISO 105-J03:2009)
LST EN ISO 10360-6:2002/AC:2008 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)
LST EN ISO 8655-6:2002 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error (ISO 8655-6:2002)
LST EN ISO 8655-6:2002/AC:2009 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error (ISO 8655-6:2002/Cor 1:2008)

AENOR, Calculation of Detection Error

UNE-EN ISO 10360-6:2002 Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 6: Estimation of errors in computing Gaussian associated features. (ISO 10360-6:2001)
UNE-EN ISO 105-J03:2010 Textiles - Tests for colour fastness - Part J03: Calculation of colour differences (ISO 105-J03:2009)
UNE 58911:2002 Storage and retrieval machines. Calculation principles of storage and retrieval machines. Tolerances, deformations and clearances in the high-bay warehouse.
UNE-EN ISO 8655-6:2003 Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error. (ISO 8655-6:2002)
UNE-EN 81-50:2017 Safety rules for the construction and installation of lifts - Examinations and tests - Part 50: Design rules, calculations, examinations and tests of lift components

ZA-SANS, Calculation of Detection Error

SANS 216-4-2:2004 Specification for radio disturbance and immunity measuring apparatus and methods Part 4-2: Uncertainties, statistics and limit modelling - Uncertainty in EMC measurements
SANS 216-4-4:2008 Specification for radio disturbance and immunity measuring apparatus and methods Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio services

SE-SIS, Calculation of Detection Error

SIS SS 01 42 14-1979 Statistical interpretation of data — Power of tests relating to means and variances

CZ-CSN, Calculation of Detection Error

CSN 39 5108-1963 Testing of cartriges for civil fire arms. Function test and facultative caloulations

European Committee for Electrotechnical Standardization（CENELEC）, Calculation of Detection Error

EN 60970:2007 Insulating liquids - Methods for counting and sizing particles (Incorporating corrigendum January 2008)

Group Standards of the People's Republic of China, Calculation of Detection Error

T/QGCML 1492-2023 Specification of wire rope quality inspection methods based on computer vision

International Telecommunication Union (ITU), Calculation of Detection Error

ITU-R BT.1304 SPANISH-1997 CHECKSUM FOR ERROR DETECTION AND STATUS INFORMATION IN INTERFACES CONFORMING WITH RECOMMENDATIONS ITU-R BT.656 AND ITU-R BT.799

Defense Logistics Agency, Calculation of Detection Error

DLA SMD-5962-88533 REV C-1994 MICROCIRCUIT, DIGITAL, CMOS, ERROR DETECTION AND CORRECTION UNIT, MONOLITHIC SILICON

CEN - European Committee for Standardization, Calculation of Detection Error

PREN 81-50-2018 Safety rules for the construction and installation of lifts - Examinations and tests - Part 50: Design rules@ calculations@ examinations and tests of lift components

国家市场监督管理总局、中国国家标准化管理委员会, Calculation of Detection Error

GB/T 21355-2022 Non-destructive testing—Industrial computed radiography with storage phosphor imaging plates—Classification of systems