ZH
RU
ES

formed within the cyst

formed within the cyst, Total:91 items.

In the international standard classification, formed within the cyst involves: Fasteners, Medical equipment, Internal combustion engines for road vehicles, Internal combustion engines, Rubber and plastics products, Screw threads, Aids for disabled or handicapped persons, Telecommunication systems, Construction materials, Cutting tools, Radiocommunications, Document imaging applications, Lubricants, industrial oils and related products, Integrated Services Digital Network (ISDN), Computer graphics, Solar energy engineering.

U.S. Military Regulations and Norms, formed within the cyst

ARMY MIL-I-45916 B-1975 INSERT, SCREW THREAD - THREAD CUTTING AND THREAD FORMING

British Standards Institution (BSI), formed within the cyst

BS ISO 19045:2015 Ophthalmic optics. Contact lens care products. Method for evaluating Acanthamoeba encystment by contact lens care products
BS ISO 6622-1:2021 Tracked Changes. Internal combustion engines. Piston rings. Rectangular rings made of cast iron
20/30412479 DC BS ISO 6622-1. Internal combustion engines. Piston rings. Part 1. Rectangular rings made of cast iron
BS EN 10226-2:2005(2016) Pipe threads where pressure tight joints are made on the threads - Taper external threads and taper internal threads - Dimensions, tolerances and designation
BS ISO/IEC 12087-2:1994 Information technology. Computer graphics and image processing. Image processing and interchange (IPI). Functional specification - Programmer's imaging kernel system application program interface

GM North America, formed within the cyst

GM GMN10047-2003 Inner Pressure Burst Test for Mechanical Tubing for Hydroforming
GM GM2780M-1998 Formed Carpet Material (Interior Floor) with Foam Backing
GM GMN10047-2011 Inner Pressure Burst Test for Mechanical Tubing for Hydroforming (Issue 2; Do Not Use on New Programs; No Replacement)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), formed within the cyst

ASHRAE OR-10-060-2010 The Influence of HVAC Systems on Indoor Secondary Organic Aerosol Formation

Korean Agency for Technology and Standards (KATS), formed within the cyst

KS R ISO 6624-3:2018 Internal combustion engines — Piston rings — Part 3: Keystone rings made of steel
KS R ISO 6624-1:2018 Internal combustion engines — Piston rings — Part 1: Keystone rings made of cast iron
KS R ISO 6624-1:2003 Internal combustion engines－Piston rings－Part 1：Keystone rings made of cast iron
KS R ISO 6624-2:2009 Internal combustion engines－Piston rings－Part 2：Half keystone rings made of cast iron
KS X ISO 14648-2:2007 Micrographics-Quality control of COM recorders that generate images using a single internal display system-Part 2:Method of use
KS X ISO 14648-1:2007 Micrographics-Quality control of COM recorders that generate images using a single internal display system-Part 1:Characteristics of the software test target

KR-KS, formed within the cyst

KS R ISO 6624-3-2018 Internal combustion engines — Piston rings — Part 3: Keystone rings made of steel
KS R ISO 6624-1-2018 Internal combustion engines — Piston rings — Part 1: Keystone rings made of cast iron

Professional Standard - Aviation, formed within the cyst

HB/Z 408-2013 Internal pressure push-bending forming process of aluminum alloy tube with small bending radius

American Society for Testing and Materials (ASTM), formed within the cyst

ASTM D6117-97(2005) Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes
ASTM D6117-97 Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes
ASTM D6117-13e1 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes
ASTM D6593-15 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-02 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-02a Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-00 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-01 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-14a Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-15a Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-16 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-13a Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-13b Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-14 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-08 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-09 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-09a Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-18e1 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature
ASTM D6593-16a Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-03 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-03a Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-04 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-04a Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-10 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-13 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-06a Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-06 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-05a Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-05 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-07a Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D6593-07 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D5302-00a Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D5302-01a Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D5302-01 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions

GOSTR, formed within the cyst

GOST R 59227-2020 Rehabilitation activities. Services on lower-limb orthotics. Composition, contents and the order of rendering the services

RU-GOST R, formed within the cyst

GOST R 59541-2021 Rehabilitation activities. Services on upper-limb orthotics. Composition, contents and the order of rendering the services
GOST 28045-1989 Internal broaches for straight splines based at internal diameter dauble pass combined type. Construction
GOST 28047-1989 Internal broaches for straight splines based at internal diameter four pass combined type. Construction

(U.S.) Ford Automotive Standards, formed within the cyst

FORD WSS-M4D975-A-2010 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND AIRBAG COVER, 87 A DUROMETER HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D740-A2-2012 POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS) CALENDERED SHEET, VACUUM FORMABLE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D909-A1-2012 POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS), CALENDERED SHEET, VACUUM FORMABLE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M98D27-A-2010 POLYVINYL CHLORIDE (PVC), DRY BLEND SLUSH/RIGID SUBSTRATE, FORMED TRIM ASSEMBLY, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

International Telecommunication Union (ITU), formed within the cyst

ITU-T G.121-1993 Loudness Ratings (LRs) of National Systems Study Group 12
ITU-T G.122-1993 Influence of National Systems on Stability and Talker Echo in International Connections Study Group 12
ITU-R F.634-4-1997 Error Performance Objectives for Real Digital Radio-Relay Links Forming Part of the High-Grade Portion of International Digital Connections at a Bit Rate Below the Primary Rate within an Integrated Services Digital Network
ITU-T G.126-1993 Listener Echo in Telephone Networks Study Group 12
ITU-R M.1181-1995 Minimum Performance Objectives for Narrow-Band Digital Channels Using Geostationary Satellites to Serve Transportable and Vehicular Mobile Earth Stations in the 1-3 GHz Range Not Forming Part of the ISDN
ITU-T G.120-1998 Transmission Characteristics of National Networks Study Group 12 [Superseded: ITU-T G.125 ITU-T G.125 FRENCH ITU-T G.125 SPANISH ITU-T G.134 ITU-T G.134 FRENCH ITU-T G.134 SPANISH]
ITU-T T.505-1994 Document Application Profile PM-26 for the Interchange of Enhanced Structure Mixed Content Documents in Processable and Formatted Forms - Terminals for Telematic Services Study Group 8; 105 pp
ITU-R F.1398-1999 Performance Degradation Due to Interference from Other Services Sharing the Same Frequency Bands on a Primary Basis with Digital Radio-Relay Systems Operating at or Above the Primary Rate and Which May Form Part of the National Portion of a 27 500 km Hyp
ITU-R F.634-4 FRENCH-1997 Error Performance Objectives for Real Digital Radio-Relay Links Forming Part of the High-Grade Portion of International Digital Connections at a Bit Rate Below the Primary Rate within an Integrated Services Digital Network
ITU-R F.634-4 SPANISH-1997 ERROR PERFORMANCE OBJECTIVES FOR REAL DIGITAL RADIO-RELAY LINKS FORMING PART OF THE HIGH-GRADE PORTION OF INTERNATIONAL DIGITAL CONNECTIONS AT A BIT RATE BELOW THE PRIMARY RATE WITHIN AN INTEGRATED SERVICES DIGITAL NETWORK
ITU-R M.1181 SPANISH-1995 Minimum Performance Objectives for Narrow-Band Digital Channels Using Geostationary Satellites to Serve Transportable and Vehicular Mobile Earth Stations in the 1-3 GHz Range Not Forming Part of the ISDN
ITU-R M.1181 FRENCH-1995 MINIMUM PERFORMANCE OBJECTIVES FOR NARROW-BAND DIGITAL CHANNELS USING GEOSTATIONARY SATELLITES TO SERVE TRANSPORTABLE AND VEHICULAR MOBILE EARTH STATIONS IN THE 1-3 GHz RANGE, NOT FORMING PART OF THE ISDN
ITU-T D.251 SPANISH-1988 GENERAL CHARGING AND ACCOUNTING PRINCIPLES FOR THE BASIC TELEPHONE SERVICE PROVIDED OVER THE ISDN OR BY INTERCONNECTION BETWEEN THE ISDN AND THE PUBLIC SWITCHED TELEPHONE NETWORK

American National Standards Institute （ANSI), formed within the cyst

ANSI/ASTM F2718:2009 Standard Specification for Polyethylene (PE) and Cement Mortar Formed in Place Lining System for the Rehabilitation of Water Pipelines
ANSI/ASTM F2719:2009 Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining Systems (FIPLS) for the Rehabilitation of Water Pipelines

Danish Standards Foundation, formed within the cyst

DS/EN 10226-2:2006 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
DS/EN 10226-1:2005 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation

Lithuanian Standards Office , formed within the cyst

LST EN 10226-2-2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
LST EN 10226-1-2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation

AENOR, formed within the cyst

UNE-EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
UNE-EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parellel internal threads. Dimensions, tolerances and designation.

RO-ASRO, formed within the cyst

STAS 1785/1-1973 Indoor post insulators, made of porce- lain for electrical engineering purpo- ses, with outer metal fittings ASSEMBLIED POST INSULATORS (INSULATORS WITH FITTINGS)

Association Francaise de Normalisation, formed within the cyst

FD P18-473:2022 Recommandations provisoires pour l'utilisation dans les bétons de granulats dont la teneur en sulfates est supérieure aux seuils normalisés vis-à-vis de la formation d'ettringite secondaire d'origine interne et de thaumasite d'origine interne
XP P18-472:2022 Essai de performance vis-à-vis du risque de gonflement d'un béton incorporant des granulats dont la teneur en sulfates est supérieure aux seuils normalisés dans les conditions de formation d'ettringite secondaire d'origine interne et de thaumasi...

IX-EU/EC, formed within the cyst

EC-241202-SENEGAL-2002 AGREEMENT in the form of an Exchange of Letters concerning the provisional application of the Protocol setting out the fishing opportunities and the financial contribution provided for in the Agreement between the European Economic Community and the Gover
COM (2000) 369 FINAL-2000 Proposal for a Council Decision on the Conclusion of an Agreement in the Form of an Exchange of Letters between the European Community and Norway Concerning the Extension of the Common Communication Network/Common System Interface within the Framework of

International Electrotechnical Commission (IEC), formed within the cyst

IEC TS 62257-7-4:2019 Recommendations for renewable energy and hybrid systems for rural electrification - Part 7-4: Generators - Integration of solar with other forms of power generation within hybrid power systems

German Institute for Standardization, formed within the cyst

DIN 16917-2:2015-10 Pipes and fittings made of thermoplastic materials with profiled wall and smooth pipe inside - Large pipes over DN 1200 for underground installation - Part 2: Specifications for pipes and fittings / Note: Applies in conjunction with DIN 16917-1 (2015-10).
DIN 16917-1:2015-10 Pipes and fittings made of thermoplastic materials with profiled wall and smooth pipe inside - Large pipes over DN 1200 for underground installation - Part 1: General requirements and performance characteristics / Note: Applies in conjunction with DIN ...

Standard Association of Australia （SAA）, formed within the cyst

AS ISO/IEC 12087.2:2015 Information technology — Computer graphics and image processing — Image Processing and Interchange (IPI) — Functional specification, Part 2: Programmer’s imaging kernel system application programme interface