ZH
RU
ES

How to use the plate instrument

How to use the plate instrument, Total:322 items.

In the international standard classification, How to use the plate instrument involves: Semiconductor devices, Elements of buildings, Construction industry, Measurement of volume, mass, density, viscosity, Analytical chemistry, Paper and board, Equipment for petroleum and natural gas industries, Rubber, Road vehicles in general, Chipless working equipment, Semi-manufactures of timber, Radiation measurements, Fluid storage devices, Linear and angular measurements, Mechanical testing, Particle size analysis. Sieving, Non-destructive testing, Footwear, Road engineering, Fuels, Products of the textile industry, Protection against fire, Road vehicle systems, Measurement of time, velocity, acceleration, angular velocity, Sports equipment and facilities, Burners. Boilers, Interior finishing, Medical equipment, Milk and milk products, Soil quality. Pedology, Glass, Protective equipment, Corrosion of metals, Magnetic materials, TESTING, Surface treatment and coating, Measurement of fluid flow, Metalliferous minerals, Sensory analysis, Lubricants, industrial oils and related products, Insulating materials, Document imaging applications, Microprocessor systems, Products of the chemical industry, Graphical symbols, Earth-moving machinery, Testing of metals, Non-textile floor coverings, Electronic tubes, On-board equipment and instruments, Fibre optic communications, Construction materials, Tobacco, tobacco products and related equipment, Railway rolling stock, Paints and varnishes, Protection of and in buildings, Textile fibres, Acoustics and acoustic measurements, Air quality, Agricultural machines, implements and equipment, Plastics, Vocabularies, Measurement of force, weight and pressure, Coals, Structures of buildings, Optics and optical measurements, Waxes, bituminous materials and other petroleum products, Floor treatment appliances, Petroleum products in general, Photography, Shipbuilding and marine structures in general, Earthworks. Excavations. Foundation construction. Underground works, Rubber and plastics products, Screw threads, Wood-based panels, Raw materials for rubber and plastics, Nuclear energy engineering.

Association Francaise de Normalisation, How to use the plate instrument

NF C96-022-40*NF EN 60749-40:2012 Semiconductor devices - Mechanical and climatic test methods - Part 40 : board level drop test method using a strain gauge
NF EN 60749-40:2012 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 40 : méthode d'essai de chute au niveau de la carte avec utilisation d'une jauge de contrainte
NF EN 13523-3:2021 Tôles prélaquées - Méthodes d'essai - Partie 3 : différence de couleur et métamérisme - Comparaison au moyen d'instruments
NF B35-309:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use.
NF E32-131:1982 Steam generators. Conventional assessment of wall loss in operation.
NF B53-669:2023 Planchers en bois et parquets - Classement d'usage des parquets et méthodes d'essai de caractérisation des finitions pour parquet
NF X65-011-2*NF ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2 : primary calibration methods
NF B35-309*NF EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use
NF P98-818-21*NF EN 12697-21:2020 Bituminous mixtures - Test methods - Part 21 : indentation using plate specimens
NF X11-507*NF ISO 2591-1:1989 Test sieving. Part 1 : methds using test sieves of woven wire cloth and perforated metal plate.
NF EN 14903:2018 Sols sportifs - Systèmes de sols multisports pour utilisation en intérieur - Méthode d'essai de détermination de la glissance en rotation
NF EN ISO 4787:2021 Verrerie et matériel en plastique de laboratoire - Instruments volumétriques - Méthodes d'essai de la capacité et d'utilisation
NF EN ISO 7973:2016 Céréales et produits de mouture des céréales - Détermination de la viscosité de la farine - Méthode utilisant un amylographe
NF EN 61290-10-1:2009 Amplificateurs optiques - Méthodes d'essai - Partie 10-1 : paramètres à canaux multiples - Méthode d'impulsion utilisant un interrupteur optique et un analyseur de spectre optique
NF ISO 2971:2013 Cigarettes et bâtonnets-filtres - Détermination du diamètre nominal - Méthode utilisant un instrument de mesure optique sans contact

German Institute for Standardization, How to use the plate instrument

DIN EN 60749-40:2012-02 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge (IEC 60749-40:2011); German version EN 60749-40:2011
DIN EN 60749-40:2012 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge (IEC 60749-40:2011); German version EN 60749-40:2011
DIN 12791-3:1983 Laboratory glassware; density hydrometers; use and test methods
DIN 10956:2007 Apparatus for sensory analysis - Universal testing glasses and lids - Requirements and instructions for use
DIN 10956:1975 Apparatus for sensory analysis; universal testing glasses and lids, requirements, instructions for use
DIN EN 12697-21:2020 Bituminous mixtures - Test methods - Part 21: Indentation using plate specimens
DIN EN 61290-10-2:2008-07 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007); German version EN 61290-10-2:2008 / Note: DIN EN 61290-10-2 (2004-02) remains valid alongside this stan...
DIN ISO 2971:2004 Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus (ISO 2971:1998)
DIN IEC 61336:1999 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods (IEC 61336:1996)
DIN EN 12697-21:2020-05 Bituminous mixtures - Test methods - Part 21: Indentation using plate specimens; German version EN 12697-21:2020
DIN EN ISO 4787:2022-03 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021); German version EN ISO 4787:2021
DIN EN 61290-10-1:2010-01 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (IEC 61290-10-1:2009); German version EN 61290-10-1:2009 / Note: DIN EN 61290-10-1 (2004-02) remains valid along...
DIN EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO/DIS 4787:2021); German and English version prEN ISO 4787:2021
DIN EN ISO 7973:2016-03 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (ISO 7973:1992); German version EN ISO 7973:2015

ES-UNE, How to use the plate instrument

UNE-EN 60749-40:2011 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge (Endorsed by AENOR in November of 2011.)
UNE-EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021) (Endorsed by Asociación Española de Normalización in February of 2022.)
UNE-EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (Endorsed by AENOR in May of 2008.)
UNE-EN 12697-21:2022 Bituminous mixtures - Test methods - Part 21: Indentation using plate specimens
UNE-EN 61290-10-1:2009 Optical amplifiers - Test methods -- Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (Endorsed by AENOR in July of 2009.)
UNE-EN ISO 7973:2016 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (ISO 7973:1992)

American Society for Testing and Materials (ASTM), How to use the plate instrument

ASTM C627-93(1999) Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
ASTM C627-18 Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
ASTM C627-10e1 Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
ASTM F78-97(2002) Standard Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards
ASTM D2394-05 Standard Methods for Simulated Service Testing of Wood and Wood-Base Finish Flooring
ASTM D6635-01 Standard Test Method for Performing the Flat Plate Dilatometer
ASTM D6635-01(2007) Standard Test Method for Performing the Flat Plate Dilatometer
ASTM D6635-15 Standard Test Method for Performing the Flat Plate Dilatometer
ASTM E1458-12(2022) Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
ASTM F2421-05(2011) Standard Test Method for Measurement of Resilient Floor Plank by Dial Gage
ASTM D2885-95(1999) Standard Test Method for Research and Motor Method Octane Ratings Using On-Line Analyzers
ASTM D2885-21 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D6587-12 Standard Test Method for Yarn Number Using Automatic Tester
ASTM D6587-12(2018) Standard Test Method for Yarn Number Using Automatic Tester
ASTM D2885-08 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D2885-09 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D5099-93(2003) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
ASTM D5099-93(1998) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
ASTM F1678-96 Standard Test Method for Using a Portable Articulated Strut Slip Tester (PAST)
ASTM D6230-98(2005) Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
ASTM F2961-14 Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter
ASTM G73-10 Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus
ASTM A1036-04(2015) Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers
ASTM E408-13(2019) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM E2583-07(2015) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
ASTM D6951/D6951M-09(2015) Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
ASTM D6951-03 Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
ASTM D6951/D6951M-09 Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
ASTM D3464-96(2014) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM D5099-08 Standard Test Methods for Rubberx2014;Measurement of Processing Properties Using Capillary Rheometry
ASTM D8184-18 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM D8184-18e1 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM D1436-97(2008) Standard Test Methods for Application of Emulsion Floor Polishes to Substrates for Testing Purposes
ASTM D7404-07 Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM D7404-07(2012) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM E2058-13a Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM D7404-07(2016) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM D5099-08(2017) Standard Test Methods for Rubber&x2014;Measurement of Processing Properties Using Capillary Rheometry
ASTM D5215-93(2021) Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives
ASTM D5215-93(1999) Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives
ASTM D5215-93(2012) Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives
ASTM D828-22 Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
ASTM C1789-14 Standard Test Method for Calibration of Hand-Held Moisture Meters on Gypsum Panels
ASTM D528-97(2007) Standard Test Method for Machine Direction of Paper and Paperboard
ASTM D5289-95(2001) Standard Test Method for Rubber Property8212;Vulcanization Using Rotorless Cure Meters
ASTM D7428-08e1 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
ASTM D6928-08 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
ASTM D5289-19 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D4541-09 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D5289-95 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM E303-93(2018) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM F1930-18 Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM D7271-06(2020) Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
ASTM D5289-19a Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM C518-15 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM E3367-23 Standard Test Method for Determining the Combustion Behavior of Layered Assemblies using a Cone Calorimeter
ASTM D5215-93(2005) Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives
ASTM D1518-14 Standard Test Method for Thermal Resistance of Batting Systems Using a Hot Plate
ASTM D1518-11a Standard Test Method for Thermal Resistance of Batting Systems Using a Hot Plate
ASTM D5485-16 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
ASTM D5142-02a Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-02ae1 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-02 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D3999-91(1996) Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
ASTM E303-93(1998) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM F1677-96 Standard Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST)
ASTM D5093-90(1997) Standard Test Method for Field Measurement of Infiltration Rate Using a Double-Ring Infiltrometer with a Sealed-Inner Ring
ASTM D5277-92(2002) Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
ASTM D1052-09(2019) Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus
ASTM D5093-15e1 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
ASTM D2583-13 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D2583-13a Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D5093-15 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
ASTM C627-18e1 Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
ASTM E972-96(2021) Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight
ASTM D5142-04 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-09 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5454-93(1999) Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM D664-09 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D4944-11 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
ASTM D5454-04 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM E2244-05 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2244-11 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2244-11(2018) Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM D664-11ae1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D6648-08(2016) Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM D6648-08 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM F1930-17 Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM D4541-22 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D5454-11(2020) Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM F1930-13 Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM D4060-10 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D664-18e2 Test Method for Determination of Flexible Creep Hardness of Asphalt Binders Using a Bending Beam Rheometer
ASTM D4395-84(1998) Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using the Flexible Plate Loading Method
ASTM C1383-15 Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
ASTM C1667-09 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
ASTM C1667-07 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
ASTM D5289-06 Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
ASTM D6117-10 Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes
ASTM D5142-90(1998) Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5001-10(2014) Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
ASTM E1458-92 Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
ASTM D7271-06 Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
ASTM D7941/D7941M-23 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
ASTM E1696-15(2022) Standard Test Method for Field Measurement of Raised Retroreflective Pavement Markers Using a Portable Retroreflectometer
ASTM E2246-11(2018) Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2245-11(2018) Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM D6204-12 Standard Test Method for Rubbermdash;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM F1930-23 Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM F2055-00 Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method

British Standards Institution (BSI), How to use the plate instrument

BS 7334-4:1992 Measuring instruments for building construction. Methods for determining accuracy in use of theodolites
BS EN ISO 4787:2011 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
BS 6538-2:1992 Air permeance of paper and board - Method for determination of air permeance using the Bendtsen apparatus
BS 7334-3:1990 Measuring instruments for building construction. Methods for determining accuracy in use: optical levelling instruments
BS 7334-5:1992 Measuring instruments for building construction. Methods for determining accuracy in use of optical plumbing instruments
BS 7334-6:1992 Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments
BS 7334-8:1992 Measuring instruments for building construction. Methods for determining accuracy in use of electronic distance-measuring instruments up to 150 m
BS 7334-1:1990 Measuring instruments for building construction. Methods for determining accuracy in use: theory
BS ISO 14934-2:2013 Fire tests. Calibration and use of heat flux meters. Primary calibration methods
BS ISO 9337-1:1999 Contact lenses. Determination of back vertex power. Method using focimeter with manual focusing
BS 7334-2:1990 Measuring instruments for building construction - Methods for determining accuracy in use: measuring tapes
BS EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
BS ISO 21283:2018 Iron ores. Determination of specific surface area. Test method using air-permeability apparatus (Blaine)
BS 6563:1985 Method for determination of the roughness of paper and board by the Parker Print-surf apparatus
BS 6921:1988 Method for evaluation of the thermal endurance of flexible sheet electrical insulating materials using the wrapped tube method
BS ISO 12653-2:2000 Electronic imaging - Test target for the black-and-white scanning of office documents - Method of use
BS ISO 12653-2:2001 Electronic imaging. Test target for the black-and-white scanning of office documents. Method of use
BS EN ISO 20320:2020 Protective clothing for use in Snowboarding. Wrist Protectors. Requirements and test methods
BS EN 61290-10-4:2007 Optical amplifiers - Test methods - Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
BS EN 12697-21:2020 Tracked Changes. Bituminous mixtures. Test methods. Indentation using plate specimens
18/30318776 DC BS EN ISO 20320. Protective clothing for use in Snowboarding. Wrist Protectors. Requirements and test methods
BS 1796-1:1989 Test sieving. Methods using test sieves of woven wire cloth and perforated metal plate
BS ISO 23048:2018 Ships and marine technology. Verification method for portable power measurement using a strain gauge
BS EN 60749-37:2008 Semiconductor devices — Mechanical and climatic test methods — Part 37: Board level drop test method using an accelerometer
BS EN 29052-1:1992 Acoustics. Method for the determination of dynamic stiffness.. Materials used under floating floors in dwellings
BS EN ISO 7973:2015 Cereals and milled cereal products. Determination of the viscosity of flour. Method using an amylograph

Canadian General Standards Board （CGSB), How to use the plate instrument

CGSB 9.0 NO. 4-92-CAN/CGSB-1992 Methodes D'Essai Des Pates Et Du Papier Comportement A La Traction Des Papiers Et Cartons (A L'Aide D'Un Appareil A Vitesse Constante D'Allongement)
CGSB 9.0 NO. 14-98-CAN/CGSB-1998 Methods of Testing Pulp and Paper Pulp, Paper and Paperboard - Colour Measurement with a Diffuse/Zero Geometry Tristimulus Reflectance Meter

SE-SIS, How to use the plate instrument

SIS SS IEC 250:1982 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
SIS SS IEC 248:1988 Nuclear instrumen ta tion — Dimensions of planchets usedin nuclear electronic instruments

Professional Standard - Petroleum, How to use the plate instrument

SY/T 5930-2010 Operation and maintenance for electromagnetic instruments

European Committee for Electrotechnical Standardization（CENELEC）, How to use the plate instrument

HD 475 S1-1986 Dimensions of Planchets Used in Nuclear Electronic Instruments

HU-MSZT, How to use the plate instrument

MSZ 8880/2.lap-1963

Korean Agency for Technology and Standards (KATS), How to use the plate instrument

KS M 6695-2016(2021) Testing method of crack growth using Demattia flex-cracking apparatus
KS M 6695-1984 Testing method of crack growth using Demattia flex-cracking apparatus
KS R 1156-2002(2007) Instrument panel impact absorption test method
KS M 6695-2016 Testing method of crack growth using Demattia flex-cracking apparatus
KS B 5648-2002(2022) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS L ISO 4787:2006 Laboratory glassware-Volumetric glassware-Methods for use and testing of capacity
KS L ISO 4787:2016 Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity
KS M ISO 3783:2018 Paper and board — Determination of resistance to picking — Accelerated speed method using the IGT-type tester(electric model)
KS F 2601-2020 Standard test method for floor slipperiness using the O-Y Pull Slip Meter
KS H ISO 2971:2008 Cigarettes and filter rods-Determination of nominal diameter-Method using a laser beam measuring apparatus
KS H ISO 2971:2013 Cigarettes and filter rods -- Determination of nominal diameter -- Method using a laser beam measuring apparatus
KS H ISO 2971-2013(2018) Cigarettes and filter rods -- Determination of nominal diameter -- Method using a laser beam measuring apparatus
KS F 2393-2019 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer
KS X ISO 12653-2:2007 Electronic imaging-Test target for the black-and-white scanning of office documents-Part 2:Method of use
KS F 2393-2014 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer
KS B 5648-2002 Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS B 0422-2016 Inspection Method for Taper Screw Gauges
KS F 2390-2014 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer

Professional Standard - Machinery, How to use the plate instrument

JB/T 50116-1998 Plate shears Reliability assessment method (only for internal use)
JB/T 12457-2015 Non-destructive testing instruments.Testing method of X-ray delector for circuit board detection
JB/T 50115-1998 Plate bending machine Reliability assessment method (only for internal use)
JB/T 5471-1991 Knobs for instrument and meter - Model designation method

Lithuanian Standards Office , How to use the plate instrument

LST HD 475 S1-2002 Dimensions of planchets used in nuclear electronic instruments (IEC 60248:1984)
LST EN 14278-1-2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device
LST EN 10280+A1-2007 Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester

European Committee for Standardization (CEN), How to use the plate instrument

EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021)
EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15)
FprEN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO/FDIS 4787:2021)

ES-AENOR, How to use the plate instrument

UNE 20-179 Pt.3-1985
UNE 115-215-1991 Earth moving machinery. Operation and maintenance. Training of mechanics

International Organization for Standardization (ISO), How to use the plate instrument

ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
ISO 3782:1980 Paper and board — Determination of resistance to picking — Accelerating speed method using the IGT tester (Pendulum or spring model)
ISO 4787:2021 Laboratory glass and plastic ware — Volumetric instruments — Methods for testing of capacity and for use
ISO 2971:1998 Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus
ISO/PAS 11819-4:2013 Acoustics - Method for measuring the influence of road surfaces on traffic noise - Part 4: SPB method using backing board
ISO 21283:2018 Iron ores - Determination of specific surface area - Test method using air-permeability apparatus (Blaine)
ISO 12653-2:2000 Electronic imaging - Test target for the black-and-white scanning of office documents - Part 2: Method of use

American National Standards Institute （ANSI), How to use the plate instrument

ANSI/ASTM F1678:1997 Test Method for Using a Portable Articulated Strut Slip Tester (PAST)
ANSI/ASTM E2058a:2013 Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ANSI/ASTM A977:1997 Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ANSI/ASTM A773/A 773M:2001 Test Method for D-C Magnetic Properties of Materials Using Ring and Permeameter Procedures with D-C Electronic Hysteresigraphs
ANSI/ASTM E2307:2010 Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-Story Test Apparatus

Indonesia Standards, How to use the plate instrument

SNI 4427-2008 Testing methods of hardness surface frictional properties using British Pendulum Tester (BPT)
SNI 7881-2013
SNI 03-2850-1992 Code for the installation of utilities on the road

KR-KS, How to use the plate instrument

KS M ISO 3783-2018 Paper and board — Determination of resistance to picking — Accelerated speed method using the IGT-type tester(electric model)

Japanese Industrial Standards Committee (JISC), How to use the plate instrument

JIS P 8114:1994 Testing method for folding endurance of paper and paperboard by schopper tester
JIS Z 2257:2021 Biaxial tensile testing method for sheet metals using a cruciform test piece
JIS P 8119:1994 Testing method for smoothness of paper and paperboard by bekk tester
JIS B 7602:2009 Calibration and test method for force-proving instruments
JIS K 3920:2009 Test methods for floor polishes
JIS A 1316:2022 Test method using cone calorimeter measuring heat release rate and smoke production rate for building materials

AENOR, How to use the plate instrument

UNE 57152-2:1990 PAPER AND BOARD. DETERMINATION OF RESISTANCE TO PICKING. ACCELERATING SPEED METHOD USING THE IGT TESTER. (PENDULUM OR SPRING MODEL)
UNE-EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device

IT-UNI, How to use the plate instrument

UNI 7625-1976
UNI 7626-1976
UNI 4019-1958
UNI EN 12697-21-2021 Bituminous mixtures - Test methods - Part 21: Indentation using plate specimens
UNI 7745-1977

Taiwan Provincial Standard of the People's Republic of China, How to use the plate instrument

CNS 14128-1998 Method of impact test for instrument panel of passenger cars
CNS 13143-1993 Method of Test for Internal Bonding Strength Paperboard ( Using Z- direction Tensile / Compression Tester)
CNS 11872-1987 Measurement of Fluid Flow by Means of Orifice Plates or Nozzles

VN-TCVN, How to use the plate instrument

TCVN 1044-2007 Laboratory glassware.Volumetric glassware.Methods for use and testing of capacity
TCVN 1044-2011 Laboratory glassware - Volumetric instruments Methods for testing of capacity and for use
TCVN 5077-2008 Cigarettes and filter rods.Determination of nominal diameter.Method using a laser beam measuring apparatus

Danish Standards Foundation, How to use the plate instrument

DS/EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
DS 1103.1:1976 Test methods for rigid flat sheets. Apparatus and general testing conditions
DS/EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device
DS/ISO/PAS 11819-4:2013 Acoustics - Method for measuring the influence of road surfaces on traffic noise - Part 4: SPB method using backing board

Group Standards of the People's Republic of China, How to use the plate instrument

T/WQTB 1002-2021 Technical requirements and test methods for the padel courts

Standard Association of Australia （SAA）, How to use the plate instrument

AS 4276.3.1:1995 Water microbiology Method 3.1:Heterotrophic colony count methods - Pour plate method using plate count agar
AS 1580.401.3:2002(R2013)
AS 2956.4:1988 Earth-moving machinery - Instrumentation and operator's controls - Symbols

RU-GOST R, How to use the plate instrument

GOST 32255-2013 Milk and milk products. Instrumental express-method for determination of physic-chemical identification parameters by infrared analyzer
GOST 21107.12-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for spark discharges
GOST 31634-2012 Cigarettes and filter rods. Determination of nominal diameter. Method using a laser beam measuring apparatus
PNST 190-2017 Freight cars. Method of dynamic tests for impact on track with the use of strain-gauge-based wheelset
GOST 21107.11-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for glow-discharge indicators
GOST 14056-1977 Hard coals. Rapid method for the determination of dilatometer characteristics in IGI-DMetI apparatus
GOST R 57157-2016 Timber structures. Test methods of joints made with punched metal plate fasteners
GOST 21107.13-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for pulsed thyratrons and gas-filled rectifiers
GOST R 53518-2009 Ophtnalmic instruments. Part 1. General requirements applicable to all ophthalmic instruments and test methods

RO-ASRO, How to use the plate instrument

STAS 5730/4-1987 Surfaces condition RULES FOR THE MEASURE- MENT OF SURFACE ROUGHNESS USING STYLUS INSTRUMENTS

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to use the plate instrument

GB/T 12810-1991 Laboratory glassware--Volumetric galssware--Methods for use and testing of capacity
GB/T 20493.2-2006 Electronic imaging. Test target for the black-and-white scanning of office documents. Part 2: Method of use
GB/T 12626.4-2015 Hard fibreboard.Part 4:General purpose boards for use in dry conditions
GB/T 12626.5-2015 Hard fibreboard.Part 5:General purpose boards for use in humid conditions
GB/T 12626.7-2015 Hard fibreboard.Part 7:General purpose boards for use in exterior conditions
GB/T 12626.8-2015 Hard fibreboard.Part 8:Load bearing boards for use in dry conditions
GB/T 12626.9-2015 Hard fibreboard.Part 9:Load bearing boards for use in humid conditions
GB/T 12626.6-2015 Hard fibreboard.Part 6:General purpose boards for use in high-humid conditions

国家市场监督管理总局、中国国家标准化管理委员会, How to use the plate instrument

GB/T 12810-2021 Laboratory glassware—Capacity methods testing and use of volumetric instruments
GB/T 40826-2021 Test method for hand-arranging staple length of dehaired cashmere—Flatbed scanner method

TR-TSE, How to use the plate instrument

TS 2950-1978 Measurement Of Water Flow In Closed Conduits - Tracer Methods Part III: Constant Rate Injection Method Using Radioactive Tracers

PT-IPQ, How to use the plate instrument

NP EN 13523-3-2002 Coil coated metals Test methods Part 3:Colour difference-Instrumental comparison

CU-NC, How to use the plate instrument

NC 90-01-09-1986 Metrological Assurance Pasameters, Verification Methods and Means

TH-TISI, How to use the plate instrument

TIS 1294-1995 Standard test method for flash point of cutback asphalt with tag open-cup

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., How to use the plate instrument

ASHRAE 41.9-2011 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE 41.9 ERTA-2017 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters

The American Road & Transportation Builders Association, How to use the plate instrument

AASHTO T 278-1990(R2007) Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
AASHTO T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2015 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus

AASHTO - American Association of State Highway and Transportation Officials, How to use the plate instrument

T 278-1990 Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
TP48-1994 Standard Test Method for Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus (Edition 1A)
T 245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus

Professional Standard - Coal, How to use the plate instrument

MT/T 154.10-1996 Modeling method and management method of safety instruments and meters used in coal mines

CEN - European Committee for Standardization, How to use the plate instrument

PREN 12697-21-2018 Bituminous mixtures - Test methods - Part 21: Indentation using plate specimens

U.S. Military Regulations and Norms, How to use the plate instrument

ARMY A-A-52575 A-2003 THEODOLITES, SURVEYING, DIRECTION, FIRST-ORDER WITH ACCESSORIES, TRIPOD, AND CASES

Military Standard of the People's Republic of China-General Armament Department, How to use the plate instrument

GJB 3288-1998 Military optical instrument test methods
GJB 1758-1993 Calibration methods for military meteorological instruments

Professional Standard - Agriculture, How to use the plate instrument

NY 337-1998 Application methods of yield-increasing bacteria

US-FCR, How to use the plate instrument

FCR COE CRD-C 53-01-2001 TEST METHOD FOR CONSISTENCY OF NO-SLUMP CONCRETE USING THE MODIFIED VEBE APPARATUS

Inner Mongolia Provincial Standard of the People's Republic of China, How to use the plate instrument

DB15/T 981-2016 Carded cashmere hand row length test method drawing board electronic scanner method

BE-NBN, How to use the plate instrument

NBN-ISO 8322-8:1992 Building construction - Measuring instruments - Procedures for determining accuracy in use - Part 8 : Electronic distance-measuring instruments up to 150 m

(U.S.) Ford Automotive Standards, How to use the plate instrument

FORD ESB-M2E66-A-2002 PANEL BOARD, PRESSED WOOD, NON-DIELECTRIC GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M98D34-A-2010 THERMOPLASTIC POLYURETHANE (TPU) FORMED INSTRUMENT PANEL ASSEMBLY ***TO BE USED WITH FORD WSS-M99P1111-A***

未注明发布机构, How to use the plate instrument

BS 7334-2:1990(1999) Measuring instruments for building construction — Part 2 : Methods for determining accuracy in use : Measuring tapes Copyright
DIN EN 674:1999 Glass in construction – Determination of the heat transfer coefficient (U-value) – Method using the plate device
DIN EN 20535:1994 paper and cardboard; Determination of water absorption capacity using the DIN Cobb method

International Electrotechnical Commission (IEC), How to use the plate instrument

IEC 60181:1964 Index of electrical measuring apparatus used in connection with ionizing radiation

IN-BIS, How to use the plate instrument

IS 13863-1993 Cereals and milled cereal products. Determination of the viscosity of flour. Method using an amylograph
IS 10275-1982

CENELEC - European Committee for Electrotechnical Standardization, How to use the plate instrument

EN 61290-10-1:2003 Optical amplifiers Test methods Part 10-1: Multichannel parameters Pulse method using an optical switch and optical spectrum analyzer

Institute of Electrical and Electronics Engineers (IEEE), How to use the plate instrument

IEEE/ANSI N42.14-1999 Calibration and use of germanium spectrometers for the measurement of gammma-ray emission rates of radionuclides
IEEE Std 1871.1-2014 IEEE Recommended Practice for Using IEEE 1671.2(TM) Instrument Description Templates for Describing Synthetic Instrumentation for Classes of Instruments such as Waveform Generators, Digitizers, External Oscillators, and Up and Down Converters

Illuminating Engineering Society of North America, How to use the plate instrument

IESNA LM-28-2012 Approved Method: IES Guide for the Selection, Care, and Use of Electrical Instruments in the Photometric Laboratory

Professional Standard - Medicine, How to use the plate instrument

YY/T 1146-2016 Measurement methods of illuminance for medical optical instruments
YY 91146-1999 Test method of illumination intensity for medical optical instrument

Professional Standard - Military and Civilian Products, How to use the plate instrument

WJ 743-1994 Stress test method for adhesives used in optical instruments
WJ 746-1994 Impact test method for adhesives used in optical instruments
WJ 747-1994 High temperature test method for adhesives used in optical instruments
WJ 748-1994 Low temperature test method for adhesives used in optical instruments

工业和信息化部, How to use the plate instrument

WJ/T 746-2014 Impact test method for glue used in optical instruments
WJ/T 747-2014 High temperature test method for glue used in optical instruments
WJ/T 743-2014 Glue stress test method for optical instruments
WJ/T 748-2014 Low temperature test method for glue used in optical instruments

ZA-SANS, How to use the plate instrument

SANS 12653-2:2006 Electronic imaging - Test target for the black-and-white scanning of office documents Part 2: Method of use

AT-ON, How to use the plate instrument

OENORM EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO/DIS 4787:2021)

NO-SN, How to use the plate instrument

NS 8018-1993 Geotechnical testing. Laboratory methods. Determination of one-dimensional consolidation properties by oedometer testing. Method using continuous loading

Professional Standard - Nuclear Industry, How to use the plate instrument

EJ/T 1139-2001 γ-ray radiation meters and γ-ray spectrometers used for prospecting-characteristics and test methods