ZH
RU
ES
How to measure particle size
How to measure particle size, Total:61 items.
In the international standard classification, How to measure particle size involves: Metalliferous minerals, Optical equipment, Particle size analysis. Sieving, Air quality, Powder metallurgy, Test conditions and procedures in general, Fertilizers, Testing of metals, Soil quality. Pedology, Products of the chemical industry.
German Institute for Standardization, How to measure particle size
- DIN 51455:2020-12 Liquid petroleum products - Determination of particle number and particle size in oils
- DIN EN 481:1993-09 Workplaces atmospheres; size fraction definitions for measurement of airborne particles; German version EN 481:1993
- DIN EN 15238:2007 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm; English version of DIN EN 15238:2007-02
- DIN EN 12457-1:2003-01 Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 1: One stage batch test at a liquid to solid ration of 2 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-1:2002
- DIN EN 15238:2023-01 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm; German version EN 15238:2022
- DIN EN ISO 19749:2023-07 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021); German version EN ISO 19749:2023
- DIN EN ISO 21363:2022-03 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020); German version EN ISO 21363:2022
- DIN EN 14243-2:2019-05 Materials obtained from end of life tyres - Part 2: Granulates and powders - Methods for determining the particle size distributions and impurities, including free steel and free textile content; German version EN 14243-2:2019
- DIN EN ISO 4499-2:2020 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2020); German version EN ISO 4499-2:2020
- DIN EN ISO 4499-2:2010 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2008); German version EN ISO 4499-2:2010
- DIN ISO 11277:2002 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation (ISO 11277:1998 + ISO 11277:1998 Corrigendum 1:2002)
Professional Standard - Hydroelectric Power, How to measure particle size
- SD 313-1989 Method for measuring particle number and size distribution in oil (automatic particle counter method)
API - American Petroleum Institute, How to measure particle size
- API TR 13TR3-2018 Size Measurement of Dry@ Granular Drilling Fluid Particulates (FIRST EDITION)
Indonesia Standards, How to measure particle size
- SNI 13-4716-1998 Determination of particle size distribution by weight of sedimentation in water measurement methods
Institute of Interconnecting and Packaging Electronic Circuits (IPC), How to measure particle size
British Standards Institution (BSI), How to measure particle size
- 23/30436644 DC BS ISO 19430. Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
- BS EN 481:1993 Workplace atmospheres. Size fraction definitions for measurement of airborne particles
- BS EN 15238:2006 Soil improvers and growing media — Determination of quantity for materials with particle size greater than 60 mm
- BS EN 15238:2007 Soil improvers and growing media. Determination of quantity for materials with particle size greater than 60 mm
- BS ISO 19749:2021 Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
- BS EN ISO 21363:2022 Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
- BS EN ISO 19749:2023 Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
- BS ISO 21363:2020 Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
- 18/30351714 DC BS ISO 21363. Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
- 18/30351679 DC BS ISO 19749. Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
- BS EN 14243-2:2019 Materials obtained from end of life tyres - Part 2: Granulates and powders - Methods for determining the particle size distribution and impurities@ including free steel and free textile content
未注明发布机构, How to measure particle size
Association of German Mechanical Engineers, How to measure particle size
- VDI 3867 Blatt 1-2009 Measurement of particulate matter in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Fundamentals
- VDI 3867 Blatt 6-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical Low Pressure Impactor (ELPI)
American Society for Testing and Materials (ASTM), How to measure particle size
- ASTM D5861-95(2002) Standard Guide for Significance of Particle Size Measurements of Coating Powders
- ASTM D5861-07(2013) Standard Guide for Significance of Particle Size Measurements of Coating Powders
- ASTM E3247-20 Standard Test Method for Measuring the Size of Nanoparticles in Aqueous Media Using Dynamic Light Scattering
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, How to measure particle size
- GB/T 33714-2017 Nanotechnology—Test method for size of nanoparticles—Atomic force microscopy
ES-UNE, How to measure particle size
- UNE 146406:2018 Determination of content, maximum size and thick aggregate granulometric modulus in fresh concrete.
- UNE-EN ISO 21363:2022 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020) (Endorsed by Asociación Española de Normalización in February of 2022.)
- UNE-EN ISO 19749:2023 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021) (Endorsed by Asociación Española de Normalización in May of 2023.)
- UNE-EN 14243-2:2019 Materials obtained from end of life tyres - Part 2: Granulates and powders - Methods for determining the particle size distribution and impurities, including free steel and free textile content
Association Francaise de Normalisation, How to measure particle size
- NF U44-313*NF EN 15238:2007 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm.
- NF EN 481:1993 Atmosphères des lieux de travail - Définition des fractions de taille pour le mesurage des particules en suspension dans l'air
- NF A95-186-2:2010 Hardmetals - Metallographic determination of microstructure - Part 2 : measurement of WC grain size.
- NF EN ISO 29462:2022 Essais in situ de filtres et systèmes de ventilation générale pour la mesure de l'efficacité en fonction de la taille des particules et de la résistance à l'écoulement de l'air
- NF EN ISO 28439:2011 Air des lieux de travail - Caractérisation des aérosols ultrafins/nanoaérosols - Détermination de la distribution granulométrique et de la concentration en nombre à l'aide de systèmes d'analyse différentielle de mobilité électrique
AENOR, How to measure particle size
- UNE-EN 481:1995 WORKPLACE ATMOSPHERES. SIZE FRACTION DEFINITIONS FOR MEASUREMENT OF AIRBORNE PARTICLES.
Standard Association of Australia （SAA）, How to measure particle size
European Committee for Standardization (CEN), How to measure particle size
- EN ISO 19749:2023 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021)
- EN ISO 4499-2:2020 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2020)
- EN ISO 4499-2:2010 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2008)
- EN 15238:2006 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
Lithuanian Standards Office , How to measure particle size
- LST EN 481-2001 Workplace atmospheres - Size fraction definitions for measurement of airborne particles
International Organization for Standardization (ISO), How to measure particle size
- ISO 19749:2021 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy
- ISO 4499-2:2008 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size
- ISO 11277:1998/Cor 1:2002 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation; Technical Corrigendum 1
KR-KS, How to measure particle size
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to measure particle size
- GB/T 42732-2023 Size Distribution and Concentration Measurement of Inorganic Nanoparticles in Aqueous Phases in Nanotechnology by Single Particle Inductively Coupled Plasma Mass Spectrometry
PL-PKN, How to measure particle size
- PN M52051-1973 Pours filters Determination of the kinetic porosity and mean characteristic dimension of the bed filter grains
- PN Z04097 Arkusz 01-1974 Air purity protection Tests for the size composition of dust Measurement of quantitative distribution of projective dust particie size ^2 (im with micros- cope without using of immersion li?uid