ZH
RU
ES

Principle of laser measurement

Principle of laser measurement, Total:494 items.

In the international standard classification, Principle of laser measurement involves: Water quality, Radiation measurements, Radiation protection, Metrology and measurement in general, Linear and angular measurements, Construction technology, Optics and optical measurements, Test conditions and procedures in general, Paper and board, Non-destructive testing, Nuclear energy engineering, Photography, Acoustics and acoustic measurements, Occupational safety. Industrial hygiene, Particle size analysis. Sieving, Components for electrical equipment, Environmental protection, Crude petroleum, Tobacco, tobacco products and related equipment, Bearings, Fluid power systems, Soil quality. Pedology, Thermodynamics and temperature measurements, Internal combustion engines for road vehicles, Earthworks. Excavations. Foundation construction. Underground works, Wastes, Agricultural machines, implements and equipment, Aerospace engines and propulsion systems, Air quality, Ferrous metals, Technical drawings, Vocabularies, Analytical chemistry, Solar energy engineering, Railway rolling stock, Electronic tubes, Surface treatment and coating, Electrical engineering in general, Software development and system documentation, Protection against crime, Piezoelectric and dielectric devices, Equipment for petroleum and natural gas industries, Non-ferrous metals, Metalliferous minerals, Products of the textile industry, Quality, Energy and heat transfer engineering in general, Measurement of force, weight and pressure, Graphical symbols, Petroleum products in general, Paints and varnishes, Jewellery, Conducting materials, Graphic technology, Safety of machinery, Ergonomics, Optoelectronics. Laser equipment, Coals, Fuels, Ferroalloys, Protection of and in buildings, Construction industry, Optical equipment, Textile fibres, Products of the chemical industry, Road vehicle systems, Plastics, Measurement of fluid flow, Products of non-ferrous metals, Testing of metals, Petroleum, petroleum products and natural gas handling equipment, Measurement of volume, mass, density, viscosity, Machine tools, Milk and milk products, Industrial automation systems, Applications of information technology.

British Standards Institution (BSI), Principle of laser measurement

BS ISO 13165-2:2014 Water quality. Radium-226. Test method using emanometry
BS EN ISO 18589-7:2016 Measurement of radioactivity in the environment. Soil - In situ measurement of gamma-emitting radionuclides
BS EN 13554:2011 Non-destructive testing. Acoustic emission testing. General principles
BS ISO 11929-2:2004 Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to counting measurements with the influence of sample treatment
BS ISO 11929-1:2004 Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to counting measurements without the influence of sample treatment
PD IEC TR 61340-1:2012+A1:2020 Electrostatics. Electrostatic phenomena. Principles and measurements
BS ISO 1132-2:2001 Rolling bearings. Tolerances - Measuring and gauging principles and methods
BS ISO 9110-1:2020 Hydraulic fluid power. Measurement techniques - General measurement principles
BS ISO 7503-1:2016 Measurement of radioactivity. Measurement and evaluation of surface contamination. General principles
BS ISO 11929-8:2004 Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment
BS ISO 18669-2:2005 Internal combustion engines - Pistons pins - Inspection measuring principles
BS ISO 18669-2:2020 Tracked Changes. Internal combustion engines. Piston pins. Inspection measuring principles
BS ISO 9512:2003 Cigarettes - Determination of ventilation - Definitions and measurement principles
BS EN 14049:2003(2011) Water application intensity - Calculation principles and measurement methods
BS EN 14049:2003 Water application intensity - Calculation principles and measurement methods
BS ISO 11929-3:2004 Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to counting measurements by high resolution gamma spectrometry, without the influence of sample treatment
BS EN 15267-1:2009 Air quality - Certification of automated measuring systems - Part 1: General principles
BS EN 60904-3:2008 Photovoltaic devices — Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
BS EN 60904-3:2016 Photovoltaic devices. Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
PD IEC/TS 62758:2012 Calibration of space charge measuring equipment based on the pulsed electroacoustic (PEA) measurement principle
BS ISO 15571:1999 Practice for dosimetry in a gamma irradiation facility for radiation processing
BS ISO 1132-2:2002 Rolling bearings. Tolerances. Measuring and gauging principles and methods
PD ISO/TR 14294:2011 Workplace atmospheres. Measurement of dermal Exposure. Principles and methods
14/30303368 DC BS ISO/ASTM 51707. Guide for estimation of measurement uncertainty in dosimetry for radiation processing
BS EN ISO 105-J01:2000 Textiles - Tests for colour fastness - General principles for measurement of surface colour
BS ISO 15571:1998 Practice for dosimetry in a gamma irradiation facility for radiation processing
BS ISO 15572:1998 Guide for estimating uncertainties in dosimetry for radiation processing
DD CEN/TS 15279:2006 Workplace exposure — Measurement of dermal exposure — Principles and methods
BS ISO 23893-3:2013 Water quality. Biochemical and physiological measurements on fish. Determination of vitellogenin
BS ISO 15556:1998 Guide for selection and calibration of dosimetry systems for radiation processing
BS EN ISO 7278-1:1990 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - General principles
BS ISO 9335:2012 Optics and photonics. Optical transfer function. Principles and procedures of measurement
BS ISO/IEC 25021:2012 Systems and software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Quality measure elements
BS EN ISO 15708-2:2019 Non-destructive testing. Radiation methods for Computed tomography. Principles, equipment and samples
BS 874-1:1986 Methods for determining thermal insulating properties - Introduction, definitions and principles of measurement
BS ISO 22290:2020 Non-destructive testing. Infrared thermographic testing. General principles for thermoelastic stress measuring method
BS ISO 9335:1996 Optics and optical instruments - Optical transfer function - Principles and procedures of measurement
21/30440712 DC BS ISO 18669-2. Internal combustion engines. Piston pins - Part 2. Inspection measuring principles
18/30358829 DC BS ISO 18669-2. Internal combustion engines. Piston pins. Part 2. Inspection measuring principles
18/30358731 DC BS ISO 6621-2. Internal combustion engines. Piston rings. Part 2. Inspection measuring principles
DD ISO/TS 13899-3:2005 Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method. Determination of W content
BS EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
PD IEC TR 60522-2:2020 Medical electrical equipment. Diagnostic X-rays. Guidance and rationale on quality equivalent filtration and permanent filtration
BS ISO 15572:1999 Guide for estimating uncertainties in dosimetry for radiation processing
12/30251292 DC BS ISO/ASTM 51261. Practice for calibration of routine dosimetry systems for radiation processing
BS DD ISO/TS 13899-3:2006 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Determination of W content
BS ISO 13899-2:2005 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Determination of Nb Content
BS EN ISO 8968-1:2014 Milk and milk products. Determination of nitrogen content. Kjeldahl principle and crude protein calculation
BS 6810-2:2005 Determination of metals in textiles - Analysis by atomic emission spectroscopy

Association Francaise de Normalisation, Principle of laser measurement

NF M60-803:2001 Nuclear energy - Measurement of radioactivity in the environment - Water - Measurement of radium 226 activity in water.
NF M60-811-2:2014 Water quality - Radium 226 - Part 2 : test method using emanometry
NF M60-803-2:2012 Nuclear energy - Measurement of radioactivity in the environment - Water - Part 2 : measurement of radium 226 activity in water - Method by coprecipitation and gamma spectrometry.
NF Q03-038:1983 Paper and board tests. Measurement of diffuse reflectance factor. General principles.
NF V37-025*NF ISO 9512:2019 Cigarettes - Determination of ventilation - Definitions and measurement principles
NF M60-790-7*NF EN ISO 18589-7:2016 Measurement of radioactivity in the environment - Soil - Part 7 : in situ measurement of gamma-emitting radionuclides
NF M60-780-0:2001 Nuclear energy - Measurement of radioactivity in the environment - Bioindicators - Part 0 : general principles.
NF EN 14049:2004 Intensité d'apport d'eau - Principes de calcul et méthodes de mesure
NF V37-025:2003 Cigarettes - Determination of ventilation - Definitions and measurement principles.
NF V37-025:1993 Cigarettes. Determination of ventilation. Definitions and measurment principles.
NF ISO 9512:2019 Cigarettes - Détermination du taux de ventilation - Définitions et principes de mesurage
NF U51-470*NF EN 14049:2004 Water application intensity - Calculation principles and measurement methods
NF M60-200-7:2005 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 7 : fundamentals and general applications.
NF M60-701*NF ISO 7503-1:2017 Measurement of radioactivity - Measurement and evaluation of surface contamination - Part 1 : general principles
NF ISO 7503-1:2017 Mesurage de la radioactivité - Mesurage et évaluation de la contamination de surface - Partie 1 : principes généraux
NF M60-200-8:2005 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 8 : fundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment.
NF X44-051:1978 Dépoussiéreurs - Classification et principes de mesure de leurs caractéristiques
NF EN 13925-1:2003 Essais non destructifs - Diffraction des rayons X appliquée aux matériaux polycristallins et amorphes - Partie 1 : principes généraux
NF EN 15856:2010 Essais non destructifs - Émission acoustique - Principes généraux des contrôles par émission acoustique pour la détection de la corrosion dans une enceinte métallique remplie de liquide
NF U51-470/A1*NF EN 14049/A1:2006 Irrigation techniques - Water application intensity - Calculation principles and measurement methods
FD ISO/TR 14294:2011 Air des lieux de travail - Mesurage de l'exposition cutanée - Principes et méthodes
NF EN 14049/A1:2006 Techniques d'irrigation - Intensité d'apport d'eau - Principes de calcul et méthodes de mesure
NF EN 13775-1:2004 Applications ferroviaires - Mesure des wagons lors de leur construction et lors de modifications - Partie 1 : principes de mesure
NF M60-200:2010 Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation - Fundamentals and application.
FD X43-248*FD ISO/TR 14294:2011 Workplace atmospheres - Measurement of dermal exposure - Principles and methods
NF M60-805-2:2003 Nuclear energy - Measurement of radioactivity in the environment - Water - Part 2 : measurement of the concentration of uranium in water by inductively coupled plasma atomic emission spectroscopy.
NF M08-003*NF EN ISO 7278-1:1996 Liquid hydrocarbons. Dynamic measurement. Proving systems for volumetric meters. Part 1 : general principles.
NF ISO 1132-2:2002 Roulements - Tolérances - Partie 2 : principes et méthodes de mesurage et de vérification par calibre
NF EN ISO 2064:2000 Revêtements métalliques et autres revêtements inorganiques - Définitions et principes concernant le mesurage de l'épaisseur
NF ISO 9335:2013 Optique et photonique - Fonction de transfert optique - Principes et procédures de mesure
NF EN 54-12:2015 Systèmes de détection et d'alarme incendie - Partie 12 : détecteurs de fumée - Détecteurs linéaires fonctionnant suivant le principe de la transmission d'un faisceau d'ondes optiques rayonnées
NF M60-200-5:2005 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 5 : fundamentals and applications to counting measurements on filters during accumulation of radioactive materiel.
NF EN 13068-3:2002 Essais non destructifs - Contrôle par radioscopie - Partie 3 : principes généraux de contrôle par radioscopie à l'aide de rayons X et gamma des matériaux métalliques
NF X31-501:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente d'un échantillon de sol non remanié - Méthode du cylindre.
NF ISO 23893-3:2013 Qualité de l'eau - Mesurages biochimiques et physiologiques sur poisson - Partie 3 : dosage de la vitellogénine
NF EN ISO 20785-1:2020 Dosimétrie pour l'exposition au rayonnement cosmique à bord d'un avion civil - Partie 1 : fondement théorique des mesurages
NF S10-041*NF ISO 9335:2013 Optics and photonics - Optical transfer function - Principles and procedures of measurementt
NF E22-337-2*NF ISO 1132-2:2002 Rolling bearings - Tolerances - Part 2 : measuring and gauging principles and methods
NF EN ISO 15708-2:2019 Essais non destructifs - Méthodes par rayonnements pour la tomographie informatisée - Partie 2 : principes, équipements et échantillons
NF A91-423:1988 Surface treatments. Anodized aluminium and aluminium alloys. Measurement of total reflectivity using a photoelectric reflectometer.
NF X06-041-1*NF ISO 5725-1:1994 Application of statistics. Accuracy (trueness and precision) of measurement methods and results. Part 1 : general principles and definitions.
NF M60-200-6:2005 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 6 : fundamentals and applications to measurements by use of transient mode.
NF T51-211-2*NF EN ISO 3219-2:2021 Rheology - Part 2 : general principles of rotational and oscillatory rheometry
NF EN ISO 11929-1:2021 Détermination des limites caractéristiques (seuil de décision, limite de détection et extrémités de l'intervalle élargi) pour mesurages de rayonnements ionisants - Principes fondamentaux et applications - Partie 1 : applications élémentaires
NF EN ISO 10075-3:2005 Principes ergonomiques relatifs à la charge de travail mental - Partie 3 : principes et exigences concernant les méthodes de mesure et d'évaluation de la charge de travail mental
NF T90-336-3*NF ISO 23893-3:2013 Water quality - Biochemical and physiological measurements on fish - Part 3: determination of vitellogenin
NF EN ISO 22475-1:2021 Reconnaissance et essais géotechniques - Méthodes de prélèvement et mesurages piézométriques - Partie 1 : principes techniques pour le prélèvement des sols, des roches et des eaux souterraines

European Committee for Standardization (CEN), Principle of laser measurement

EN ISO 13165-2:2022 Water quality - Radium-226 - Part 2: Test method using emanometry (ISO 13165-2:2022)
EN ISO 23131:2022 Ellipsometry - Principles (ISO 23131:2021)
EN ISO 11929-2:2021 Determination of the characteristics limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 2: Advanced applications (ISO 11929-2:2019)
EN ISO 11929-1:2021 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 1: Elementary applications (ISO 11929-1:2019)
prEN 25666-2-1992 Water quality; determination of total mercury by flameless atomic absorption spectrometry; part 2: method after pretreatment with ultraviolet radiation (ISO 5666-2:1983)
HD 468 S1-1987 Ionizing radiation measurement systems with analogue or digital signal processing for thickness measurements
EN 14049:2003 Irrigation techniques - Water application intensity - Calculation principles and measurement methods

International Organization for Standardization (ISO), Principle of laser measurement

ISO 13165-2:2022 Water quality — Radium-226 — Part 2: Test method using emanometry
ISO 13165-2:2014 Water quality - Radium-226 - Part 2: Test method using emanometry
ISO 23131:2021 Ellipsometry — Principles
ISO 9512:2019 Cigarettes — Determination of ventilation — Definitions and measurement principles
ISO 9512:2002 Cigarettes - Determination of ventilation - Definitions and measurement principles
ISO 9512:1993 Cigarettes; determination of ventilation; definitions and measurement principles
ISO 9110-1:2020 Hydraulic fluid power — Measurement techniques — Part 1: General measurement principles
ISO/TR 17055:2002 Steel - Determination of silicon content - Inductively coupled plasma atomic emission spectrometric method
ISO 7503-1:2016 Measurement of radioactivity - Measurement and evaluation of surface contamination - Part 1: General principles
ISO 11929-1:2000 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 1: Fundamentals and application to counting measurements without the influence of sample treatment
ISO 11929-2:2000 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 2: Fundamentals and application to counting measurements with the influence of sample treatment
ISO/DIS 6980-2:2022 Nuclear energy — Reference beta-particle radiation — Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field
ISO/FDIS 6980-2:2011 Nuclear energy — Reference beta-particle radiation — Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field
ISO 18669-2:2020 Internal combustion engines — Piston pins — Part 2: Inspection measuring principles
ISO 6621-2:2020 Internal combustion engines — Piston rings — Part 2: Inspection measuring principles
ISO/ASTM 51707:2015 Guide for estimation of measurement uncertainty in dosimetry for radiation processing
ISO 5666-2:1983 Water quality; Determination of total mercury by flameless atomic absorption spectrometry; Part 2: Method after pretreatment with ultraviolet radiation
ISO/IEC TR 25021:2007 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Quality measure elements
ISO 15571:1998 Practice for dosimetry in a gamma irradiation facility for radiation processing
ISO 6980-2:2022 Nuclear energy — Reference beta-particle radiation — Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field
ISO 11929-8:2005 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 8: Fundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment
ISO 10278:1995 Steel - Determination of maganese content - Inductively coupled plasma atomic emission spectrometric method
ISO/CD 13472-2:2023 Acoustics — Measurement of sound absorption properties of road surfaces in situ — Part 2: Spot method for reflective surfaces
ISO 18669-2:2004 Internal combustion engines - Piston pins - Part 2: Inspection measuring principles
ISO/CD 9335:2023 Optics and photonics — Optical transfer function — Principles and procedures of measurement
ISO 11929-4:2001 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 4: Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment
ISO/IEC 25021:2012 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Quality measure elements
ISO 11929-3:2000 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 3: Fundamentals and application to counting measurements by high resolution gamma spectrometry, without the influence of sample treatment
ISO 11929-5:2005 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 5: Fundamentals and applications to counting measurements on filters during accumulation of radioactive material
ISO 11929-4:2020 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 4: Gui
ISO/ASTM 52701:2013 Guide for performance characterization of dosimeters and dosimetry systems for use in radiation processing
ISO/ASTM 51261:2013 Practice for calibration of routine dosimetry systems for radiation processing
ISO 8322-1:1989 Building construction; measuring instruments; procedures for determining accuracy in use; part 1: theory
ISO 22290:2020 Non-destructive testing - Infrared thermographic testing - General principles for thermoelastic stress measuring method
ISO 9335:1995 Optics and optical instruments - Optical transfer function - Principles and procedures of measurement
ISO 9335:2012 Optics and photonics - Optical transfer function - Principles and procedures of measurement
ISO 11929-6:2005 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 6: Fundamentals and applications to measurements by use of transient mode
ISO/CD 15708-2:2023 Non-destructive testing — Radiation methods for computed tomography — Part 2: Principles, equipment and samples
ISO/TS 18223:2015 Nickel alloys - Determination of Nickel content - Inductively coupled plasma atomic emission spectrometric method
ISO 11435:2011 Nickel alloys - Determination of molybdenum content - Inductively coupled plasma/atomic emission spectrometric method
ISO 4571:1981 Manganese ores and concentrates; Determination of potassium and sodium content; Flame atomic emission spectrometric method
ISO/ASTM 51261:2002 Guide for selection and calibration of dosimetry systems for radiation processing
ISO 11929-4:2022 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 4: Gui
ISO 11929-2:2019 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 2: Adv
ISO 3856-3:1980 Paints and varnishes — Determination of "soluble" metal content — Part 3: Determination of barium content — Flame atomic emission spectroscopic method
ISO 3856-3:1984 Paints and varnishes; Determination of "soluble" metal content; Part 3 : Determination of barium content; Flame atomic emission spectrometric method
ISO 11929-7:2005 Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 7: Fundamentals and general applications
ISO 23893-3:2013 Water quality - Biochemical and physiological measurements on fish - Part 3: Determination of vitellogenin
ISO 15572:1998 Guide for estimating uncertainties in dosimetry for radiation processing
ISO 14955-5:2020 Machine tools — Environmental evaluation of machine tools — Part 5: Principles for testing woodworking machine tools with respect to energy supplied

CENELEC - European Committee for Electrotechnical Standardization, Principle of laser measurement

CLC/TS 50217-2005 Guide for in situ measurements – In situ measurement of disturbance emission

German Institute for Standardization, Principle of laser measurement

DIN 19745:2006-10 Soil quality - Principles of the determination of the water content by Time Domain Reflectometry (TDR) and Time Domain Transmissometry (TDT)
DIN 25457-1:1993 Activity measurement methods for the release of radioactive residual materials and decommissioning components of nuclear facilities; principles for beta and gamma radiation measurements
DIN 42026-2:1980-08 Permanent magnet segments; measuring principle
DIN 45630-1:1971 Physical and subjective magnitudes of sound
DIN 42026-2:1980 Permanent magnet segments; measuring principle
DIN 19745:2006 Soil quality - Principles of the determination of the water content by Time Domain Reflectometry (TDR) and Time Domain Transmissometry (TDT)
DIN 2271-1:1976 Pneumatic Length Measurement (Air Gauging); Principles, Methods
DIN 4107-1:2011 Geotechnical measurements - Part 1: Principles
DIN 32877-2:2021 Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 2: Design characteristics and metrological characteristics for backward scattering measuring principles
DIN 32877-2:2021-07 Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 2: Design characteristics and metrological characteristics for backward scattering measuring principles
DIN 5030-5:2019-08 Spectral measurement of Radiation - Physical detectors for spectral measurement of radiation - Terminology, characteristic quantities, selection criteria
DIN ISO 11665-4:2021 Measurement of radioactivity in the environment - Air: radon-222 - Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis (ISO 11665-4:2020)
DIN 51418-1:2008-08 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
DIN 6800-1:1980 Procedures in dosimetry; principles of photon and electron dosimetry with probe-type detectors
DIN EN 13925-1:2003-07 Non-destructive testing - X-ray diffraction from polycristalline and amorphous material - Part 1: General principles; German version EN 13925-1:2003
DIN 51418-1:2008 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
DIN 25457-1:2012 Activity measurement methods for the clearance of radioactive substances and nuclear facility components - Part 1: Fundamentals
DIN 25043-1:2012 Railway applications - Measuring of new railway vehicles - Part 1: Measuring principles
DIN 25043-1:2012-02 Railway applications - Measuring of new railway vehicles - Part 1: Measuring principles / Note: Under certain conditions, DIN 25043-1 (1992-07) remains valid alongside this standard until 2016-02-01.*A transition period, as set out in DIN 25043-2 (2012...
DIN EN 13775-1:2004-09 Railway applications - Measuring of new and modified freight wagons - Part 1: Measuring principles; German version EN 13775-1:2003
DIN 38404-18:1994 German standard methods for the examination of water, waste water and sludge; physical and physical-chemical parameters (group C); determination of Radium-226-concentration in potable water, ground water, surface water and waste water (C 18)
DIN 51418-1:1996 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
DIN 5030-5:1987 Spectral measurement of radiation; physical detectors for spectral measurement of radiation; terminology, characteristic quantities, selection criteria
DIN ISO 7503-1:2017 Measurement of radioactivity - Measurement and evaluation of surface contamination - Part 1: General principles (ISO 7503-1:2016)
DIN 50460:1988-08 Determination of magnetic properties of soft magnetic materials; general, terminology and principles of measurement
DIN EN 14049:2006 Irrigation techniques - Water application intensity - Calculation principles and measurement methods; English version of DIN EN 14049:2004 + A1:2005
DIN EN 14049:2006-01 Irrigation techniques - Water application intensity - Calculation principles and measurement methods; German version EN 14049:2003 + A1:2005
DIN 51418-2 Bb.1:2000 X-ray spectrometry - X-Ray Emission- and X-ray Fluorescence analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results; additional information and examples of calculation
DIN 51418-2:2015-03 X-ray spectrometry - X-ray emission and X-ray fluorescence analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results
DIN 8125-1:2000 Graphical symbols for weighing - Part 1: Fundamental principles, survey
DIN CEN/TS 15279:2006-06 Workplace exposure - Measurement of dermal exposure - Principles and methods; German version CEN/TS 15279:2006
DIN EN 15856:2010-05 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid; German version EN 15856:2010
DIN 5031-11:2011-04 Optical radiation physics and illuminating engineering - Part 11: Radiometer for measuring actinic radiant quantities - Terms, characteristics and their classification
DIN ISO 11929 Bb.1:2014 Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation - Fundamentals and application; Supplement 1: Examples
DIN ISO 11929:2011 Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation - Fundamentals and application (ISO 11929:2010)
DIN 16620-2:1991 Printing technology; printing plates for offset printing; terminology and principles of measurement techniques
DIN 16620-2:1991-09 Printing technology; printing plates for offset printing; terminology and principles of measurement techniques
DIN EN 547-2:2009 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings (includes Amendment A1:2008); English version of DIN EN 547-2:2009-01
DIN 25457-1 Bb.1:2013 Activity measurement methods for the clearance of radioactive substances and nuclear facility components.Part 1: Fundamentals; Supplement 1: Explanations
DIN ISO 13472-2:2010-12 Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 2: Spot method for reflective surfaces (ISO 13472-2:2010)
DIN 51418-2:2015 X-ray spectrometry - X-ray emission and X-ray fluorescence analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results
DIN 51418-2:1996 X-ray spectrometry - X-ray emission- and X-ray fluorescense analysis (XRF) - Part 2: Definitions and basic principles for measurements, calibration and evaluation of results
DIN ISO 9335:2008 Optics and photonics - Optical transfer function - Principles and procedures of measurement (ISO 9335:1995+Cor. 1:2005);English version of DIN ISO 9335:2008-04
DIN 25482-5:1993 Limit of detection and limit of decision for nuclear radiation measurements; counting measurements by high resolution gamma spectrometry, neglecting the influence of sample treatment
DIN 25482-5 Bb.1:1997 Detection limit and decision threshold for nuclear radiation measurements - Part 5: Counting measurements by high resolution gamma spectrometry, neglecting the influence of sample treatment; examples and comments
DIN EN ISO 15708-2:2019-09 Non-destructive testing - Radiation methods for computed tomography - Part 2: Principles, equipment and samples (ISO 15708-2:2017); German version EN ISO 15708-2:2019
DIN ISO 12789-2:2013-01 Reference radiation fields - Simulated workplace neutron fields - Part 2: Calibration fundamentals related to the basic quantities (ISO 12789-2:2008)
DIN 51400-1:1992 Testing of mineral oils and fuels; determination of the sulfur content (total sulfur); general working principles
DIN EN ISO 7278-1:1996 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 1: General principles (ISO 7278-1:1987); German version EN ISO 7278-1:1995
DIN 27201-9:2006 State of railway vehicles - Basic principles and production technology - Part 9: Measuring
DIN 27201-9:2017 State of railway vehicles - Basic principles and production technology - Part 9: Measuring
DIN 27201-9:2017-06 State of railway vehicles - Basic principles and production technology - Part 9: Measuring / Note: DIN 27201-9 (2006-10) remains valid alongside this standard until 2017-12-01.
DIN ISO 5725-1:1997 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994)
DIN 32877-1:2020-04 Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 1: Basic principles and terms
DIN 53019-1:2008 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 1: Principles and measuring geometry
DIN 53019-1:2008-09 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 1: Principles and measuring geometry

IET - Institution of Engineering and Technology, Principle of laser measurement

PRINC MICROW MEAS-1993 Principles of Microwave Measurements
PRINC PLANAR NEAR-FLD ANT MEAS-2007 Principles of Planar Near-Field Antenna Measurements

Association of German Mechanical Engineers, Principle of laser measurement

VDI/VDE 2631 Blatt 1-2016 Form measurement - Principles
VDI/VDE 2631 Blatt 1-1999 Form measurement - Principles for the measurement of geometrical deviations
VDI/VDE 3511 Blatt 1-1996 Temperature measurement in industry - Principles and special methods of temperature measurement
VDI 3860 Blatt 1-2006 Measurement of landfill gas - Principles
VDI/VDE 3512 Blatt 1-2009 Temperature measurement for building automation - Basic principles
VDI/VDE 3512 Blatt 1-2017 Temperature measurement for building automation - Basic principles
VDI 3491 Blatt 1-2016 Measurement of particles - Methods for generating test aerosols - Principles and overview
VDI 2048 Blatt 1-2000 Uncertainties of measurements at acceptance tests for energy conversion and power plants - Fundamentals
VDI 4205 Blatt 1-2003 Measurement and test methods for the assessment of vapour recovery systems on filling stations - Fundamentals

RO-ASRO, Principle of laser measurement

STAS SR ISO 8322-6:1995 Building construction - Measuring instriiments- Procedures for determining sccuracy in use. Part 6: Laser instruments
STAS SR 11771-16-1997 Natural radioactive nuclides with pollution potential proceeded from ores and coals. Determination of radium 226 content from vegetation
STAS SR 11771-12-1994 Natural radioactive nuclides with pollution potential proceeded from ores and coals. Determination of radium 226 content from soil and sediment
STAS 11771/5-1984 NATURAL RADIOCTIVE NBCLIDES WITH POLLTION POTBNTIAL PROCEDED FRON ORES AND COALS 226radian contert deternimation of rocks cres powder and seedary materials of extractive minjug industry

Group Standards of the People's Republic of China, Principle of laser measurement

T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle
T/CAS 719-2023 Technical specification for routine cruise monitoring of urban road dust loading with the principle of light scattering
T/CSTM 00764-2021 Beryllium and beryllium alloy—Determination of lithium content —Flame atomic emission spectrometric method
T/CSTM 00756-2021 Iron ores—Determination of sodium and potassium contents— Flame atomic emission spectrometric method
T/CSTM 00014-2019 Iron and steel-Determination of silicon content- Inductively coupled plasma atomic emission spectrometric method
T/CMES 08007-2020 Determination of manganese, iron and phosphorus content by inductively coupled plasma atomic emission spectrometry
T/NXCL 024-2023 Method for chemical analysis of beryllium — Determination of beryllium oxide content—Inductively coupled plasma atomic emission spectrometry
T/GMES 017-2020 Determination of content of carbon, iron, aluminum and vanadium in titanium and titanium alloys - spark discharge atomic emission spectrometry

Korean Agency for Technology and Standards (KATS), Principle of laser measurement

KS B ISO 1027:2007 Radiographic image quality indicators for non－destructive testing－Principles and identification
KS A 4054-2005(2010) Radiographic image quality indicators for non-destructive testing－Principles and identification
KS B ISO 1027-2007(2012) Radiographic image quality indicators for non－destructive testing－Principles and identification
KS A 4054-2013 Radiographic image quality indicators for non-destructive testing－Principles and identification
KS H ISO 9512-2013(2018) Cigarettes－Determination of ventilation－Definitions and measurement principles
KS A ISO 11929-6-2008(2013) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 6：Fundamentals and applications to measurements by use of transient mode
KS A ISO 11929-2-2002(2012) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 2：Fundamentals and application to counting measurements with the influence of sample treatment
KS A ISO 11929-5-2008(2013) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 5：Fundamentals and applications to counting measurements on filters during accumulation of radioact
KS A ISO 11929-8-2008(2013) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 8：Fundamentals and application to unfolding of spectrometric measurements without the influence of
KS H ISO 9512:2021 Cigarettes — Determination of ventilation —Definitions and measurement principles
KS R 1122-2014 Measuring principles relating to piston ring of internal combustionengine for automobiles
KS A ISO 11929-7:2008 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 7:Fundamentals and general applications
KS A ISO 11929-7:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 7：Fundamentals and general applications
KS B ISO 9110-1-2006(2011) Hydraulic fluid power－Measurement techniques－Part 1：General measurement principles
KS A ISO 11929-2:2002 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 2:Fundamentals and application to counting measurements with the influence of sample treatment
KS A ISO 11929-2:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 2：Fundamentals and application to counting measurements with the influence of sample treatment
KS A ISO 11929-1-2002(2012) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 1：Fundamentals and application to counting measurements without the influence of sample treatment
KS H ISO 9512:2008 Cigarettes-Determination of ventilation-Definitions and measurement principles
KS H ISO 9512:2013 Cigarettes-Determination of ventilation-Definitions and measurement principles
KS B ISO TR 17055:2008 Steel－Determination of silicon content－Inductively coupled plasma atomic emission spectrometric method
KS A ISO 7503-1:2021 Measurement of radioactivity ― Measurement and evaluation of surface contamination ― Part 1: General principle
KS A ISO 11929-1:2002 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 1:Fundamentals and application to counting measurements without the influence of sample treatment
KS A ISO 11929-1:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 1：Fundamentals and application to counting measurements without the influence of sample treatment
KS A ISO 11929:2014 Determination of the characteristic limits(decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation — Fundamentals and application
KS R 1122-1999(2009) Measuring principles relating to piston ring of internal combustionengine for automobiles
KS A ISO 11929-5:2008 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 5:Fundamentals and applications to counting measurements on filters during accumulation of radioactive material
KS A ISO 11929-5:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 5：Fundamentals and applications to counting measurements on filters during accumulation of radioactive material
KS A ISO 11929-7-2008(2013) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 7：Fundamentals and general applications
KS A ISO 8529-2-2007(2022) Reference neutron radiations－Part 2：Calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field
KS A ISO 11929-6:2008 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 6:Fundamentals and applications to measurements by use of transient mode
KS A ISO 11929-6:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 6：Fundamentals and applications to measurements by use of transient mode
KS A ISO/ASTM 51707-2012(2017) Guide for estimating uncertainties in dosimetry for radiation processing
KS A ISO 11929-4-2002(2012) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 4：Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without
KS A ISO 11929-4:2002 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 4:Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment
KS A ISO 11929-4:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 4：Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment
KS A ISO/ASTM 51702-2012(2022) Practice for dosimetry in a gamma irradiation facility for radiation processing
KS R ISO 6621-2:2019 Internal combustion engines — Piston rings — Part 2: Inspection measuring principles
KS R ISO 18669-2-2015(2020) Internal combustion engines — Piston pins — Part 2: Inspection measuring principles
KS A ISO/ASTM 51608-2012(2022) Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing
KS A ISO 11929-3-2002(2012) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 3：Fundamentals and application to counting measurements by high resolution gamma spectrometry witho
KS A ISO/ASTM 51608-2012(2017) Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing
KS A ISO 11929-3:2002 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 3:Fundamentals and application to counting measurements by high resolution gamma spectrometry without the influence of sample treatment
KS A ISO 11929-3:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 3:Fundamentals and application to counting measurements by high resolution gamma spectrometry without the influence of sample treatment
KS C IEC 61577-1:2012 Radiation protection instrumentation－Radon and radon decay product measuring instruments－Part 1：General principles
KS A ISO 5725-1:2012 Accuracy(trueness and precision) of measurement methods and results-Part 1:General principles and definitions
KS D ISO 10278:2003 Steel-Determination of manganese content-Inductively coupled plasma atomic emission spectrometric method
KS A ISO/ASTM 51702-2012(2017) Practice for dosimetry in a gamma irradiation facility for radiation processing
KS A ISO/ASTM 51707-2012(2022) Guide for estimating uncertainties in dosimetry for radiation processing
KS R ISO 18669-2:2015 Internal combustion engines — Piston pins — Part 2: Inspection measuring principles
KS R ISO 18669-2:2005 Internal combustion engines-Piston pins-Part 2:Inspection measuring principles
KS E ISO 4571-2001(2016) Manganese ores and concentrates- Determination of sodium and potassium content - Flame atomic emission spectrometric method
KS D ISO 10278-2003(2018) Steel－Determination of manganese content－Inductively coupled plasma atomic emission spectrometric method
KS E ISO 4571:2001 Manganese ores and concentrates－Determination of sodium and potassium content－Flame atomic emission spectrometric method
KS E ISO 4571-2001(2021) Manganese ores and concentrates- Determination of sodium and potassium content - Flame atomic emission spectrometric method
KS D ISO 11435:2021 Nickel alloys — Determination of molybdenum content —Inductively coupled plasma/atomic emission spectrometric method
KS B ISO TR 17055-2008(2018) Steel－Determination of silicon content－Inductively coupled plasma atomic emission spectrometric method
KS B ISO 9335:2011 Optics and optical instruments-Optical transfer function-Principles and procedures of measurement
KS B ISO 9335-2016(2021) Optics and optical instruments－Optical transfer function－Principles and procedures of measurement
KS B ISO 9335:2016 Optics and optical instruments－Optical transfer function－Principles and procedures of measurement
KS D ISO 11435:2006 Nickel alloys－Determination of molybdenum－Inductively coupled plasma atomic emission spectrometric method
KS D ISO TS 18223:2018 Nickel alloys — Determination of Nickel content — Inductively coupled plasma atomic emission spectrometric method
KS M ISO 7278-1:2003 Liquid hydrocarbons－Dynamic measurement－Proving systems for volumetric meters－Part 1：General principles
KS M ISO 3856-3:2007 Paints and varnishes－Determination of “soluble” metal content－Part 3：Determination of barium content－Flame atomic emission spectrometric method
KS M ISO 3856-3-2007(2017) Paints and varnishes－Determination of “soluble” metal content－Part 3：Determination of barium content－Flame atomic emission spectrometric method
KS M ISO 3856-3:2022 Paints and varnishes — Determination of “soluble” metal content — Part 3: Determination of barium content — Flame atomic emission spectrometric method
KS A ISO/ASTM 51956-2012(2022) Practice for use of thermoluminescence dosimetry (TLD) systems for radiation processing

International Commission on Illumination (CIE), Principle of laser measurement

CIE 18.2-1983 Basis of Physical Photometry (E)
CIE 41-1978 Light as a True Visual Quantity: Principles of Measurement (1st Edition) (Reprint 1994) (E)

Standard Association of Australia （SAA）, Principle of laser measurement

AS/NZS 2772.2:2011
AS 2772.2:1988 Radiofrequency radiation - Principles and methods of measurement - 300 kHz to 100 GHz
AS/NZS 2772.2:2016 Radiofrequency fields, Part 2: Principles and methods of measurement and computation — 3 kHz to 300 GHz
AS 4250.1:1995 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - General principles
AS 4699:2000 Zinc and zinc alloys - Determination of impurities and alloying elements - Atomic emission spectrometric method

Indonesia Standards, Principle of laser measurement

SNI 18-6935-2002 Radiographic image quality indicators for non-destructive testing - Principles and identification
SNI ISO/ASTM 51261:2014
SNI ISO/ASTM 51702:2014

Occupational Health Standard of the People's Republic of China, Principle of laser measurement

GBZ 215-2009 Medical examination and management principle for the overexposed individuals
GBZ/T 189.4-2007 Measurement of Physical Agents in Workplace Part 4: Laser Radiation
GBZ/T 189.5-2007 Measurement of Physical Agents in Workplace Part 5:Microwave Radiation
GBZ/T 189.6-2007 Measurement of Physical Agents in Workplace Part 6:Ultraviolet Radiation
GBZ/T 189.1-2007 Measurement of Physical Agents in Workplace Part 1:Ultra High Frequency Radiation

American Society for Testing and Materials (ASTM), Principle of laser measurement

ASTM ISO/ASTM 53239-21 Standard Guide for Using Statistical Process Control Principles for Routine Dosimetry in Radiation Processing
ASTM E323-80(2001) Standard Specification for Perforated-Plate Sieves for Testing Purposes
ASTM E3239-21 Standard Guide for Using Statistical Process Control Principles for Routine Dosimetry in Radiation Processing
ASTM D6780-02 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
ASTM ISO/ASTM51707-15 Standard Guide for Estimation of Measurement Uncertainty in Dosimetry for Radiation Processing
ASTM ISO/ASTM 51608-05 Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing
ASTM ISO/ASTM 51608-02 Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing
ASTM ISO/ASTM51608-02 Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing
ASTM ISO/ASTM51608-05 Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing
ASTM ISO/ASTM 51702-04 Standard Practice for Dosimetry in a Gamma Irradiation Facility for Radiation Processing
ASTM ISO/ASTM 51702-02 Standard Practice for Dosimetry in a Gamma Irradiation Facility for Radiation Processing
ASTM ISO/ASTM51702-04 Standard Practice for Dosimetry in a Gamma Irradiation Facility for Radiation Processing
ASTM ISO/ASTM51702-02 Standard Practice for Dosimetry in a Gamma Irradiation Facility for Radiation Processing
ASTM ISO/ASTM52303-15 Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
ASTM ISO/ASTM 51707-15 Standard Guide for Estimation of Measurement Uncertainty in Dosimetry for Radiation Processing
ASTM C1514-08(2017) Standard Test Method for Measurement of ²³⁵U Fraction Using Enrichment Meter Principle
ASTM E2381-04(2010) Standard Guide for Dosimetry In Radiation Processing of Fluidized Beds and Fluid Streams
ASTM ISO/ASTM51608-15 Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing at Energies between 50 keV and 7.5 MeV
ASTM C1514-02 Standard Test Method for Measurement of ²³⁵U Fraction using the Enrichment Meter Principle
ASTM D381-09 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM D381-12 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM ISO/ASTM 51608-15(2022) Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing at Energies between 50 keV and 7.5 MeV
ASTM ISO/ASTM51608-15(2022) Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing at Energies between 50 keV and 7.5 MeV
ASTM ISO/ASTM 51956-02 Standard Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing
ASTM ISO/ASTM 51956-05 Standard Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing
ASTM ISO/ASTM51956-05 Standard Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing
ASTM ISO/ASTM51956-13 Standard Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing
ASTM ISO/ASTM51956-02 Standard Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing
ASTM E2701-09 Standard Guide for Performance Characterization of Dosimeters and Dosimetry Systems for Use in Radiation Processing
ASTM ISO/ASTM 52701-13 Standard Guide for Performance Characterization of Dosimeters and Dosimetry Systems for Use in Radiation Processing
ASTM ISO/ASTM51702-13 Standard Practice for Dosimetry in a Gamma Facility for Radiation Processing

国家市场监督管理总局、中国国家标准化管理委员会, Principle of laser measurement

GB/T 25104-2019 Automatic measurement of water content in crude oil—RF method
GB/T 41404-2022 Determination of platinum content in platinum alloys—Spark atomic emission spectrometric method（difference method）
GB/T 41123.1-2021 Non-destructive testing—Radiation methods for industrial computed tomography—Part 1：Principles, equipment and samples
GB/T 6609.1-2018 Chemical analysis methods and determination of physical performance of alumina—Part 1：Determination of trace elements content—Inductively coupled plasma atomic emission spectrometry method
GB/T 38791-2020 Oral care and cleansing products—Determination of boric acid and borates in toothpastes—Inductively coupled plasma atomic emission spectrometry

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Principle of laser measurement

GB/T 25104-2010 Crude oil-automatic determination of water-RF method
GB/T 19610-2004 Cigarettes-Determination of ventilation-Definitions and measurement principles
GB/T 17606-1998 Determination of sulfur in crude-oil by energy-dispersive X-ray fluorescence spectroscopy
GB/T 17606-2009 Determination of sulfur in crude-oil by energy-dispersive X-ray fluorescence spectrometry
GB/T 11186.1-1989 Methods for measuring the colour of paint films--Part 1:Principles
GB 11186.1-1989 The measurement method of the color of the coating film, the first part of the principle
GB/T 24916-2010 Surface treatment solution.Determination of metal element contents.Inductively coupled plasma atomic emission spectrometric method
GB/T 19267.4-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 4:Atomic emission spectrometry
GB/T 19267.4-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 4: Atomic emission spectrometry
GB/T 31227-2014 Test method for the surface roughness by atomic force microscope for sputtered thin films
GB/T 13163.1-2009 Radiation protection instrumentation.Radon and radon decay product measuring instruments.Part 1:General principles
GB/T 42906-2023 Determination of Equivalent Boron Content in Graphite Materials Inductively Coupled Plasma Atomic Emission Spectrometry
GB/T 22838.15-2009 Determination of physical characteristics for cigarettes and filter rods.Part 15:Cigarettes.Determination of ventilation.Definitions and measurement principles
GB/T 24234-2009 Cast iron.Determination of multi-element contents.Spark dicharge atomic emission spectrometric method(Routine method)
GB/T 11066.5-2008 Methods for chemical analysis of gold.Determination of silver, copper, iron, lead , antimony and bismuth contents.Atomic emission spectrometry
GB/T 11170-2008 Stainless steel .Determination of multi-element contents.Spark discharge atomic emission spectrometric method (Routine method)
GB/T 6730.84-2023 Determination of Total Rare Earth in Iron Ore by Inductively Coupled Plasma-Atomic Emission Spectrometry
GB 9758.3-1988 Paints and varnishes - Determination of "soluble" metal content - Part 3: Determination of barium content by flame atomic emission spectrometry
GB/T 9758.3-1988 Paints and varnishes--Determination of "soluble" metal content--Part 3:Determination of barium content--Flame atomic emission spectrometric method

ES-UNE, Principle of laser measurement

UNE-EN ISO 18589-7:2016 Measurement of radioactivity in the environment - Soil - Part 7: In situ measurement of gamma-emitting radionuclides (ISO 18589-7:2013)
UNE 84076:2016 Cosmetic raw materials. Ethanol. Quantification of mixtures of synthetized and fermented ethyl alcohol. Radiometric method.
UNE-EN ISO 15708-2:2020 Non-destructive testing - Radiation methods for Computed tomography - Part 2: Principles, equipment and samples (ISO 15708-2:2017)

TIA - Telecommunications Industry Association, Principle of laser measurement

TSB31-A-1992 Part 68 Rationale and Measurement Guidelines
TSB31-B-1998 Part 68 Rationale and Measurement Guidelines

Professional Standard - Tobacco, Principle of laser measurement

YC/T 158-2002 Cigarettes----Determination of ventilation----Definitions and measurement principles

KR-KS, Principle of laser measurement

KS H ISO 9512-2021 Cigarettes — Determination of ventilation —Definitions and measurement principles
KS A ISO 7503-1-2021 Measurement of radioactivity ― Measurement and evaluation of surface contamination ― Part 1: General principle
KS R ISO 6621-2-2019 Internal combustion engines — Piston rings — Part 2: Inspection measuring principles
KS B ISO 9335-2023 Optics and photonics — Optical transfer function — Principles and procedures of measurement
KS D ISO 11435-2021 Nickel alloys — Determination of molybdenum content —Inductively coupled plasma/atomic emission spectrometric method
KS B ISO 9335-2016 Optics and optical instruments－Optical transfer function－Principles and procedures of measurement
KS D ISO TS 18223-2018 Nickel alloys — Determination of Nickel content — Inductively coupled plasma atomic emission spectrometric method
KS M ISO 3856-3-2022 Paints and varnishes — Determination of “soluble” metal content — Part 3: Determination of barium content — Flame atomic emission spectrometric method

Society of Automotive Engineers (SAE), Principle of laser measurement

SAE J1589-1992 Internal Combustion Engines - Piston Rings - Inspection Measuring Principles
SAE J1574-2-2005 Measurement of Vehicle and Suspension Parameters for Directional Control Studies--Rationale
SAE J1574-2-2012 Measurement of Vehicle and Suspension Parameters for Directional Control Studies--Rationale

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Principle of laser measurement

ASHRAE 4486-2001 Measureing Principles for the Determination of Ice Concentration in Ice Slurry (RP-1166)

VN-TCVN, Principle of laser measurement

TCVN 6164-1996 Principles for the establishment of hierarchy schemes for measuring instruments
TCVN 6593-2010 Standard test method for gum content in fuels by jet evaporation
TCVN 7113-3-2011 Ergonomic principles related to mental workload.Principles and requirements concerning methods for measuring and assessing mental workload

(U.S.) Telecommunications Industries Association , Principle of laser measurement

TIA TSB31-B-1998 Part 68 Rationale and Measurement Guidelines

Danish Standards Foundation, Principle of laser measurement

DS/EN 14049:2004 Water application intensity - Calculation principles and measurement methods
DS/ISO 1027:1987 Radiographic image quality indicators for non-destructive testing. Principles and identification
DS/IEC/TS 62758:2012 Calibration of space charge measuring equipment based on the pulsed electro-acoustic (PEA) measurement principle
DS/EN 13775-1:2003 Railway applications - Measuring of new and modified freight wagons - Part 1: Measuring principles
DS/EN 14049/A1:2005 Irrigation techniques - Water application intensity - Calculation principles and measurement methods
DS/CEN/TS 15279:2006 Workplace exposure – Measurement of dermal exposure – Principles and methods
DS/EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
DS/ISO 23893-3:2013 Water quality - Biochemical and physiological measurements on fish - Part 3: Determination of vitellogenin
DS/EN 16016-2:2011 Non destructive testing - Radiation methods - Computed tomography - Part 2: Principle, equipment and samples
DS/ISO 3856/3:1982 Paints and varnishes. Determination of "soluble" metal content. Part 3: Determination of barium content. Flame atomic emission spectroscopic method
DS/ISO 3219-2:2021 Rheology – Part 2: General principles of rotational and oscillatory rheometry

Lithuanian Standards Office , Principle of laser measurement

LST EN 14049-2004 Water application intensity - Calculation principles and measurement methods
LST EN 13775-1-2004 Railway applications - Measuring of new and modified freight wagons - Part 1: Measuring principles
LST EN 14049-2004/A1-2005 Irrigation techniques - Water application intensity - Calculation principles and measurement methods
LST EN 15856-2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
LST EN 16016-2-2011 Non destructive testing - Radiation methods - Computed tomography - Part 2: Principle, equipment and samples

AENOR, Principle of laser measurement

UNE-EN 14049:2005 Water application intensity - Calculation principles and measurement methods
UNE-EN 13775-1:2004 Railway applications - Measuring of new and modified freight wagons - Part 1: Measuring principles
UNE-EN 14049:2005/1M:2006 Irrigation techniques - Water application intensity - Calculation principles and measurement methods
UNE-EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
UNE-EN 16016-2:2012 Non destructive testing - Radiation methods - Computed tomography - Part 2: Principle, equipment and samples

未注明发布机构, Principle of laser measurement

BS ISO 7503-1:2016(2018) Measurement of radioactivity — Measurement and evaluation of surface contamination Part 1 : General principles
BS ISO 15572:1998(2000) Guide for estimating uncertainties in dosimetry for radiation processing
BS ISO 15571:1998(2000) Practice for dosimetry in a gamma irradiation facility for radiation processing
BS ISO 15556:1998(2000) Guide for selection and calibration of dosimetry systems for radiation processing —
BS ISO 15573:1998(2000) Practice for dosimetry in an electron - beam facility for radiation processing at energies between 80 keV and 300 keV

Japanese Industrial Standards Committee (JISC), Principle of laser measurement

JIS Z 4504-1:2023 Measurement of radioactivity -- Measurement and evaluation of surface contamination -- Part 1: General principles
JIS Z 8402-1:1999 Accuracy (trueness and precision) of measurement methods and results -- Part 1: General principles and definitions
JIS Z 4574:2017 Standard practice for dosimetry in radiation processing
JIS K 2541-4:2003 Crude oil and petroleum products -- Determination of sulfur content Part 4: Energy-dispersive X-ray fluorescence method
JIS X 25021:2014 Systems and software engineering -- Systems and software Quality Requirements and Evaluation (SQuaRE) -- Quality measure elements
JIS K 0400-66-20:1998 Water quality -- Determination of total mercury by flameless atomic absorption spectrometry -- Part 2: Method after pretreatment with ultraviolet radiation
JIS B 1515-2:2006 Rolling bearings -- Tolerances -- Part 2: Measuring and gauging principles and methods
JIS B 7912-1:2004 Field procedures for testing geodetic and surveying instruments -- Part 1: Theory

American National Standards Institute （ANSI), Principle of laser measurement

ANSI/ASME Y14.43-2011 Dimensioning and Tolerancing Principles for Gages and Fixtures
ANSI/ASTM E1818:2012 Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 80 and 300 keV
ANSI/ASTM E1608:2013 Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing
ANSI/ASTM E1702:2011 Practice for Dosimetry in a Gamma Irradiation Facility for Radiation Processing
ANSI/ABMA/ISO 15242-1:2011 Rolling bearings - Measuring methods for vibration - Part 1: Fundamentals
ANSI/ASTM E2381:2004 Guide for Dosimetry in Radiation Processing of Fluidized Beds and Fluid Streams
ANSI/ASTM E1707:2013 Guide for Estimating Uncertainties in Dosimetry for Radiation Processing

CH-SNV, Principle of laser measurement

AT-ON, Principle of laser measurement

ONORM ISO 5666 Teil.2:1984 Water quality; determination of total mercury by flameless atomic absorption spectrometry; method after pretreatment with ultraviolett radiation
ONORM M 5875-2000 Equipment of municipal sewage treatment plants with in situ measuring instruments for process control
ONORM E 1008-1987 Graphical symbols jor diagrams; symbols for measuring Instruments, lamps and signalling devices
ONORM M 5871-1998 Equipment of drinking water treatment plants with in situ measuring instruments

RU-GOST R, Principle of laser measurement

GOST 21106.0-1975 Oscillator, modulator and regulation tubes anode dissipated power more than 25 W. Method of measurements of electrical parameters. General principles
GOST 14828-1969 Instruments for physical-chemical quantities measurement. Radiospectrometers. Terms
GOST 21107.0-1975 Gas discharge devices. Methods of measurement of electrical parameters. General principles
GOST R 8.594-2002 State system for ensuring the uniformity of measurements. The metrological ensuring of radiation control. General principles
GOST 8.638-2013 State system for ensuring the uniformity of measurements. Metrological ensuring of radiation control. General principles
GOST R 50279.5-1992 Paints and varnishes. Test methods of metal content. Determination of "soluble" barium content. Flame atomic emission spectrometric method
GOST 21011.0-1975 High-voltage kenotrons. Methods measurements of electric parameters. General requirements
GOST R 51927-2002 Steel and cast iron. Atomic emission nith inductively coupled plasma spectral method of calcium determination
GOST R 57060-2016 Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma atomic emission spectrometry method
GOST 8.207-1976 State system for ensuring the uniformity of measurements. Direct measurements with multiple observations. Methods of processing the results of observations. Basic principles
GOST 8.586.1-2005 State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 1. Principle of the method of measurements and general requirements
GOST R ISO 13898-2-2006 Steel and iron. Determination of nickel, copper and cobalt contents. Inductively coupled plasma atomic emission spectrometric method. Part 2. Determination of nickel content
GOST R ISO 13898-3-2007 Steel and iron. Determination of nickel, copper and cobalt contents. Inductively coupled plasma atomic emission spectrometric method. Part 3. Determination of copper content
GOST R ISO 13898-4-2007 Steel and iron. Determination of nickel, copper and cobalt contents. Inductively coupled plasma atomic emission spectrometric method. Part 4. Determination of cobalt content

GB-REG, Principle of laser measurement

REG NASA-HDBK-8739.19-3-2010 Measurement Uncertainty Analysis Principles and Methods, NASA Measurement Quality Assurance Handbook ?ANNEX 3

International Electrotechnical Commission (IEC), Principle of laser measurement

IEC TR 61340-1:2012 Electrostatics - Part 1: Electrostatic phenomena - Principles and measurements
IEC TR 61340-1:2012/AMD1:2020 Electrostatics - Part 1: Electrostatic phenomena - Principles and measurements
IEC TR 61340-1:2012/COR1:2013 Electrostatics - Part 1: Electrostatic phenomena - Principles and measurements
IEC TR 61340-1:2020 Amendment 1 - Electrostatics - Part 1: Electrostatic phenomena - Principles and measurements
IEC TR 61340-1:2012+AMD1:2020 CSV Electrostatics - Part 1: Electrostatic phenomena - Principles and measurements
IEC 60769:1983 Ionizing radiation measurement systems with analogue or digital signal processing for thickness measurements
IEC 61987-1:2006 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output

IEC - International Electrotechnical Commission, Principle of laser measurement

IEC TR 61340-1:2012/COR2:2017 ELECTROSTATICS – Part 1: Electrostatic phenomena – Principles and measurements (Edition 1.0)
TS 62758-2012 Calibration of space charge measuring equipment based on the pulsed electroacoustic (PEA) measurement principle (Edition 1.0)

BELST, Principle of laser measurement

STB 1935-2009 Grude oil. Determination of organic chloride content by method of wavedispersion X-ray fluorescence spectrometry

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Principle of laser measurement

IEEE N42.28-2002 American National Standard for Calibration of Germanium Detectors for In-Situ Gamma-Ray Measurements

European Committee for Electrotechnical Standardization（CENELEC）, Principle of laser measurement

HD 468-1987 Ionizing Radiation Measurement Systems with Analogue or Digital Signal Processing for Thickness Measurements
HD 468 S1-1989 Ionizing Radiation Measurement Systems with Analogue or Digital Signal Processing for Thickness Measurements

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Principle of laser measurement

ITU-R SM.326-6-1990 Determination and Measurement of the Power of Radio Transmitters - Section 1A - Spectrum Engineering and Computer-Aided Principles and Techniques

SE-SIS, Principle of laser measurement

SIS SS IEC 617-8:1986 Graphical symbols for diagrams - Measuring instruments, lamps and signalling devices

CZ-CSN, Principle of laser measurement

CSN ISO 1027:1994 Radiographic image quality indicators for non-destructive testing. Principles and identification

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Principle of laser measurement

GB/T 34209-2017 Stainless steel—Determination of multi-element contents—Glow discharge optical emission spectrometry
GB/T 33086-2016 Water treatment chemical—Determination of arsenic and mercury—Atomic fluorescence spectrometry
GB/T 34208-2017 Iron and steel—Determination of antimony and tin content—Inductively coupled plasma atomic emission spectrometric method

NO-SN, Principle of laser measurement

NS 4930-1984 Principles for the measurement and the evaluation of human exposure to vibration transmitted to the hand

CN-STDBOOK, Principle of laser measurement

图书 A-4692 The principle and detection technology of metering instruments for operating passenger cars

Taiwan Provincial Standard of the People's Republic of China, Principle of laser measurement

CNS 13059-3-1992 Photovoltaic Devices Part 3`75Measurement Principles for Terrestrial Photovoltaic`6rPV`6sSolar Devices With Reference Spectral Irradiance Data
CNS 13059.3-1992 Photovoltaic Devices Part 3`75Measurement Principles for Terrestrial Photovoltaic`6rPV`6sSolar Devices With Reference Spectral Irradiance Data
CNS 15019-2006 Method of test for determination of additive elements in lubricating oils by inductively coupled plasma atomic emission spectrometry

Yunnan Provincial Standard of the People's Republic of China, Principle of laser measurement

DB53/T 897-2018 Determination of germanium content in coal by inductively coupled plasma atomic emission spectrometry

CEN - European Committee for Standardization, Principle of laser measurement

EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid

ZA-SANS, Principle of laser measurement

SANS 1833-1:2007 Textiles - Quantitative chemical analysis Part 1: General principles of testing

Professional Standard - Water Conservancy, Principle of laser measurement

SL/T 220-1998 Determination of the trace amounts of Copper Zinc Cadmium and Lead in Water (Flow injection atomic absorption spectrometry)

Professional Standard - Commodity Inspection, Principle of laser measurement

SN/T 1600-2005 Determination of Trace Elements in Coal by Inductively Coupled Plasma-Atomic Emission Spectrometry

SAE - SAE International, Principle of laser measurement

SAE J1574-2-2018 Steel@ Corrosion-Resistant@ Bars@ Wire@ Forgings@ Mechanical Tubing@ and Rings 16Cr - 4.0Ni - 0.30Cb (Nb) - 4.0Cu Solution Heat Treated@ Precipitation Hardenable

IT-UNI, Principle of laser measurement

UNI EN ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry

Professional Standard - Ferrous Metallurgy, Principle of laser measurement

YB/T 4395-2014 Steel.Determination of molybdenum, niobium and tungsten contents.Inductively coupled plasma atomic emission spectrometric method
YB/T 4462-2015 High purity ferrosilicon.Determination of boron content.Inductively coupled plasma atomic emission spectrometric method
YB/T 4396-2014 Stainless steel.Determination of multi-element contents.Inductively coupled plasma atomic emission spectrometric method

HU-MSZT, Principle of laser measurement

MSZ MI 19384-1981

Hebei Provincial Standard of the People's Republic of China, Principle of laser measurement

DB13/T 2856-2018 Determination of iron ore potassium and sodium content by inductively coupled plasma atomic emission spectrometry

Guangdong Provincial Standard of the People's Republic of China, Principle of laser measurement

DB44/T 1935-2016 Determination of Trace Elements in Hair by Inductively Coupled Plasma-Atomic Emission Spectrometry

Professional Standard - Non-ferrous Metal, Principle of laser measurement

YS/T 438.5-2013 Methods for physical performance determination of Sandy alumina.Part 5:X-ray diffraction spectrum method for determination of α-alumina content

Institute of Electrical and Electronics Engineers (IEEE), Principle of laser measurement

IEEE Std 119-1974 IEEE Recommended Practice for General Principles of Temperature Measurement as Applied to Electrical Apparatus