ZH
RU
ES

Solid Matter Instruments

Solid Matter Instruments, Total:499 items.

In the international standard classification, Solid Matter Instruments involves: Quality, Optics and optical measurements, Analytical chemistry, Fuels, Coals, Mining equipment, Sterilization and disinfection, Water quality, Wind turbine systems and other alternative sources of energy, Capacitors, Wood-based panels, Vocabularies, Measurement of volume, mass, density, viscosity, Aircraft and space vehicles in general, Farm buildings, structures and installations, Thermodynamics and temperature measurements, Energy and heat transfer engineering in general, Rubber, Particle size analysis. Sieving, Paints and varnishes, Radiation protection, Test conditions and procedures in general, Resistors, Radiation measurements, Environmental protection, Nuclear energy engineering, Inorganic chemicals, Geology. Meteorology. Hydrology, Iron and steel products, Kitchen equipment, Protection against dangerous goods, Sugar. Sugar products. Starch, Powder metallurgy, Electrical accessories, Cereals, pulses and derived products, Air quality, Acoustics and acoustic measurements, Transport, Wood, sawlogs and sawn timber, Adhesives, Soil quality. Pedology, Domestic, commercial and industrial heating appliances, Farming and forestry, Agricultural machines, implements and equipment.

RU-GOST R, Solid Matter Instruments

GOST 4.170-1985 System of product-quality indices. Analysers for aerosols of solid and granular materials. Nomenclature of indices
GOST R 54244-2010 Solid mineral fuel. Instrumental method for determination of carbon, hydrogen and nitrogen
GOST 32979-2014 Solid mineral fuel. Instrumental method for determination of carbon, hydrogen and nitrogen
GOST 32985-2014 Solid biofuels. Determination of carbon, hydrogen and nitrogen by instrumental methods
GOST R 54216-2010 Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen by instrumental methods
GOST 34091-2017 Solid biofuel. Product quality index system
GOST R 55660-2013 Solid mineral fuel. Determination of volatile matter
GOST 24802-1981 Level meters for liquid and solids. Terms and definitions
GOST 32990-2014 Solid biofuel. Determination of the content of volatile matter
GOST 4.136-1985 Product-quality index system. Thermophysical apparatus. Nomenclature of indices
GOST 17537-1972 Paint materials. Methods for the determination of the conten of volatile and non-volatile matters, hard and film-forming materials
GOST 33508-2015 Solid recovered fuel. Determination of the content of volatile matter
GOST R 55119-2012 Solid recovered fuels. Methods for the determination of biomass content
GOST 19892-1974 Acoustics instruments for determination of physical and chemical characteristics and structures of substances. Terms and definitions
GOST 8.583-2003 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of the refractive index of solid, liquid and gaseous medium

International Truck and Engine Corporation (ITEC), Solid Matter Instruments

INTERN CEMS BT-26-2009 Solid Matter Test
INTERN CEMS BT-32-2009 Apparent Density Of Solid Matter Test

International Federation of Trucks and Engines, Solid Matter Instruments

NAVISTAR MPAPS BT-26-2014 Solid Matter Test
NAVISTAR CEMS BT-26-2014 VOID - Solid Matter Test
NAVISTAR CEMS BT-32-2009 Apparent Density Of Solid Matter Test
NAVISTAR MPAPS BT-32-2014 Apparent Density of Solid Matter Test

Professional Standard - Geology, Solid Matter Instruments

DZ/T 0121.9-1994 Terminology of Geological Instruments Terminology of Geological Analysis Instruments and Petrophysical Properties Testing Instruments
DZ/T 0121.7-1994 Geological instrumentation terminology Geophysics prespecting logger instrument terms
DZ/T 0121.8-1994 Terminology of geological instruments Terminology of data processing equipment for geological and geophysical data

ZA-SANS, Solid Matter Instruments

SANS 5003:1987 Sterility of solid materials
SANS 12902:2007 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
SANS 6049:2004 Water - Suspended solids content
ARP 448-2007 Ethanol gel fuel for cooking and other gel burning appliances
SANS 15239:2006 Solid mineral fuels - Evaluation of the measurement performance of on-line analysers
CKS 30-1985 Non-insulated stainless steel food containers (for solid food, liquid food and water)
SANS 6036:2005 Total solids content (non-volatile matter) of wood adhesives
SANS 60384-4:2007 Fixed capacitors for use in electronic equipment Part 4: Sectional specification - Aluminium electrolytic capacitors with solid (Mn02) and non-solid electrolyte
SANS 1698:2007 Verification standards for the verification of volume-measuring instruments, including commercial standards of volume

National Metrological Verification Regulations of the People's Republic of China, Solid Matter Instruments

JJG(教委) 04-1992 Verification Regulations for Solid Isotope Mass Spectrometer

British Standards Institution (BSI), Solid Matter Instruments

BS ISO 29541:2010 Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen content. Instrumental method
BS EN 15104:2011 Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen. Instrumental methods
BS DD CEN/TS 15104:2006 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
BS DD CEN/TS 15104:2005 Solid biofuels — Determination of total content of carbon, hydrogen and nitrogen — Instrumental methods
DD ISO/TS 12902:2002 Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen. Instrumental methods
BS EN 61577-3:2014 Radiation protection instrumentation. Radon and radon decay product measuring instruments - Specific requirements for radon decay product measuring instruments
BS PD CEN/TR 15569:2009 Solid biofuels — A guide for a quality assurance system
DD CEN/TS 15234:2006 Solid biofuels — Fuel quality assurance
BS EN 60384-15:2017 Fixed capacitors for use in electronic equipment. Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
BS EN 61577-2:2017 Radiation protection instrumentation. Radon and radon decay product measuring instruments - Specific requirements for 222Rn and 220Rn measuring instruments
19/30387015 DC BS IEC 63175. Nuclear instrumentation. Fixed high intensity proton cyclotron within the energy range of 10 ~ 20 MeV
BS EN IEC 60384-26:2018 Fixed capacitors for use in electronic equipment. Sectional specification. Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
19/30402906 DC BS EN IEC 63175. Nuclear instrumentation. Fixed high intensity proton cyclotron within the energy range of 10 ~ 20 MeV
BS EN 15148:2010 Solid biofuels. Determination of the content of volatile matter
BS EN 15148:2009 Solid biofuels - Determination of the content of volatile matter
BS ISO 15239:2005 Solid mineral fuels - Evaluation of the measurement performance of on-line analysers
BS EN 62534:2015 Radiation protection instrumentation. Highly sensitive hand-held instruments for neutron detection of radioactive material
BS EN 62533:2016 Radiation protection instrumentation. Highly sensitive hand-held instruments for photon detection of radioactive material
BS QC 300200:1983 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification: fixed tantalum capacitors with solid or non-solid electrolyte
BS IEC 62533:2010 Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material
BS EN 60384-18:2007 Fixed capacitors for use in electronic equipment — Part 18: Sectional specification — Fixed aluminium electrolytic surface mount capacitors with solid (Mn02) and non-solid electrolyte
BS EN 60384-18:2016 Fixed capacitors for use in electronic equipment. Sectional specification. Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte
BS EN IEC 62372:2022 Nuclear instrumentation. Housed scintillators. Test methods of light output and intrinsic resolution
PD IEC TR 61577-5:2019 Radiation protection instrumentation. Radon and radon decay product measuring instruments. General properties of radon and radon decay products and their measurement methods
BS EN 60384-4:2016 Fixed capacitors for use in electronic equipment - Sectional specification. Fixed aluminium electrolytic capacitors with solid (MnO₂) and non-solid electrolyte
BS IEC 62534:2010 Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material
BS EN 15402:2011 Solid recovered fuels. Determination of the content of volatile matter
BS EN 15234-1:2011 Solid biofuels. Fuel quality assurance. General requirements
BS EN ISO 22167:2021 Solid recovered fuels. Determination of content of volatile matter
BS EN 15234-6:2012 Solid biofuels. Fuel quality assurance. Non-woody pellets for non-industrial use
BS DD CEN/TS 15296:2006 Solid biofuels - Calculation of analyses to different bases
BS EN 60384-4:2007 Fixed capacitors for use in electronic equipment - Sectional specification - Aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte
BS EN 130301:2002 Harmonized system of quality assessment for electronic components - Blank Detail Specification - Aluminium electrolytic capacitors with non-solid electrolyte
BS EN IEC 60384-25:2021 Tracked Changes. Fixed capacitors for use in electronic equipment. Sectional specification. Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
BS EN IEC 60384-24:2021 Tracked Changes. Fixed capacitors for use in electronic equipment. Sectional specification. Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
BS EN 130201:1995 Specification for harmonized system of quality assessment for electronic components - Blank detail specification: fixed tantalum capacitors with solid electrolyte, porous anode (sub-family 3)
19/30404099 DC BS EN IEC 62372. Nuclear instrumentation. Housed scintillators. Measurement methods of light output and intrinsic resolution
BS 3378:1986 Specification for roomheaters burning solid mineral fuels
BS EN 130202:1998 Harmonized system of quality assessment for electronic components - Blank detail specification: fixed tantalum capacitors with non-solid electrolyte, porous anode (sub-family 2)
BS EN 15234-5:2012 Solid biofuels. Fuel quality assurance. Firewood for non-industrial use
BS EN 15234-2:2012 Solid biofuels. Fuel quality assurance. Wood pellets for non-industrial use
BS EN 15234-3:2012 Solid biofuels. Fuel quality assurance. Wood briquettes for non-industrial use
BS DD CEN/TS 14778-2:2005 Solid biofuels - Sampling - Part 2: Methods for sampling particulate material transported in lorries
BS DD CEN/TS 14778-2:2006 Solid biofuels. Sampling. Methods for sampling particulate material transported in lorries

FI-SFS, Solid Matter Instruments

International Organization for Standardization (ISO), Solid Matter Instruments

ISO/TS 12902:2001 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
ISO/CD 29541:1976 Solid mineral fuels — Determination of total carbon, hydrogen and nitrogen content — Instrumental method
ISO 29541:2010 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen content - Instrumental method
ISO 15239:2005 Solid mineral fuels - Evaluation of the measurement performance of on-line analysers
ISO 1742:1980 Glucose syrups; Determination of dry matter; Vacuum oven method
ISO 22167:2021 Solid recovered fuels - Determination of content of volatile matter
ISO 1743:1973 Title missing - Legacy paper document
ISO 1743:1982 Glucose syrup; Determination of dry matter content; Refractive index method

European Committee for Standardization (CEN), Solid Matter Instruments

EN 15104:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
PD CEN/TR 15569:2009 Solid biofuels - A guide for a quality assurance system
CEN/TR 15569:2009 Solid biofuels - A guide for a quality assurance system
EN 15148:2009 Solid biofuels - Determination of the content of volatile matter
CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
EN 15440:2011 Solid recovered fuels - Methods for the determination of biomass content (Incorporating corrigendum October 2011)
EN 50020:1977 Electrical apparatus for potentially explosive atmospheres; intrinsic safety i
EN 50020:1977/A1:1979 Electrical apparatus for potentially explosive atmospheres; intrinsic safety i
EN 50020:1977/A2:1985 Electrical apparatus for potentially explosive atmospheres; intrinsic safety i
EN 50020:1977/A3:1990 Electrical apparatus for potentially explosive atmospheres; intrinsic safety i
EN 50020:1977/A4:1990 Electrical apparatus for potentially explosive atmospheres; intrinsic safety i
EN 50020:1977/A5:1990 Electrical apparatus for potentially explosive atmospheres; intrinsic safety i
EN 50039:1980 Electrical apparatus for potentially explosive atmospheres. Intrinsic safety "i" Systems
EN ISO 22167:2021 Solid recovered fuels - Determination of content of volatile matter (ISO 22167:2021)
PD CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
CEN/TR 15591:2007 Solid recovered fuels - Determination of the biomass content based on the 14C method
EN 15296:2011 Solid biofuels - Conversion of analytical results from one basis to another [Superseded: CEN CEN/TS 15296]

Association Francaise de Normalisation, Solid Matter Instruments

NF X34-117:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods.
NF EN 130200:2015 Spécification intermédiaire : condensateurs fixes au tantale à électrolyte non solide ou solide
NF EN 130200/A3:2015 Spécification intermédiaire : condensateurs fixes au tantale à électrolyte non solide ou solide
NF C83-112-200/A3*NF EN 130200/A3:2015 Sectional specification : fixed tantalum capacitors with non-solid or solid electrolyte
FD X34-115*FD CEN/TR 15569:2011 Solid biofuels - A guide for a quality assurance system
FD CEN/TR 15569:2011 Biocombustibles solides - Guide pour un système d'assurance qualité
NF EN 15216:2021 Matrices environnementales solides - Détermination de la concentration en matières solides dissoutes totales (TDS) de l'eau et des éluats
NF M03-033:1968 SOLID FUELS. DETERMINATION OF MINERAL MATTER IN COAL.
NF T42-003:1987 Rubber latices. Determination of total solids content.
NF C83-112/A1:1991 Electronic Components Tantalum capacltors with soild and non-soild electrolyte porous anode
XP X43-321:2018 Qualité de l'air - Émissions de sources fixes - Détermination de la concentration massique d'ammoniac par des techniques instrumentales
NF C93-112-15*NF EN 60384-15:2017 Fixed capacitors for use in electronic equipment - Part 15 : sectional specification : Fixed tantalum capacitors with non-solid or solid electrolyte
NF EN 60384-15:2017 Condensateurs fixes utilisés dans les équipements électroniques - Partie 15 : spécification intermédiaire - Condensateurs fixes au tantale, à électrolyte non solide ou solide
NF EN IEC 60384-26:2018 Condensateurs fixes utilisés dans les équipements électroniques - Partie 26 : spécification intermédiaire - Condensateurs fixes électrolytiques en aluminium à electrolyte solide en polymère conducteur
XP X43-322:2018 Air quality - Stationary source emission - Determination of the mass concentration of formaldehyde by instrumental techniques
XP CEN/TS 17021:2018 Émissions de sources fixes - Détermination de la concentration massique en dioxyde de soufre par des techniques instrumentales
NF C93-112-26*NF EN IEC 60384-26:2018 Fixed capacitors for use in electronic equipment - Part 26 : sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
NF EN IEC 60384-24:2021 Condensateurs fixes utilisés dans les équipements électroniques - Partie 24 : spécification intermédiaire - Condensateurs fixes électrolytiques au tantale pour montage en surface à électrolyte solide en polymère conducteur
NF C83-112/A2:1991 Electronic Components Tantalum capacitors with solid and non-solid electrolyte porous anode
NF EN ISO 15212-2:2002 Densimètres à oscillation - Partie 2 : instruments industriels pour liquides homogènes
NF C19-534*NF EN 62534:2016 Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material
NF C19-533*NF EN 62533:2016 Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material
NF EN 62534:2016 Instrumentation pour la radioprotection - Instruments portables de haute sensibilité pour la détection neutronique de matières radioactives
NF X34-205:2011 Solid recovered fuels - Methods for the determination of biomass content.
NF X34-205:2021 Solid recovered fuels - Methods for the determination of biomass content
NF EN ISO 21644:2021 Combustibles solides de récupération - Méthode de détermination de la teneur en biomasse
NF EN IEC 60384-25:2021 Condensateurs fixes utilisés dans les équipements électroniques - Partie 25 : spécification intermédiaire - Condensateurs fixes électrolytiques en aluminium pour montage en surface à électrolyte solide en polymère conducteur
NF C93-112-4*NF EN 60384-4:2016 Fixed capacitors for use in electronic equipment - Part 4 : sectional specification - fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte
XP X43-043*XP CEN/TS 17021:2018 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
NF C93-112-4:2008 Fixed capacitors for use in electronic equipment - Part 4 : sectional specification - Aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte.
NF C93-112-18:2008 Fixed capacitors for use in electronic equipment - Part 18 : sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte.
NF EN 60384-18:2016 Condensateurs fixes utilisés dans les équipements électroniques - Partie 18 : spécification intermédiaire - Condensateurs fixes électrolytiques à l'aluminium pour montage en surface à électrolyte solide (MnO2) et non solide
NF C93-112-24*NF EN IEC 60384-24:2021 Fixed capacitors for use in electronic equipment - Part 24 : sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
NF C93-112-25*NF EN IEC 60384-25:2021 Fixed capacitors for use in electronic equipment - Part 25 : sectional specification: Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
NF C93-112-25*NF EN 60384-25:2015 Fixed capacitors for use in electronic equipment - Part 25 : Sectional specification : Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
NF EN 60384-26-1:2011 Condensateurs fixes utilisés dans les équipements électroniques - Partie 26-1 : spécification particulière cadre - Condensateurs fixes électrolytiques en aluminium à electrolyte solide en polymère conducteur - Niveau d'assurance de la qualité EZ
NF C54-000:2015 Generic specification : fixed aluminium electrolic a.c. capasitors with non-solid electrolyte for use with motors

CEN - European Committee for Standardization, Solid Matter Instruments

PD CEN/TS 15104:2005 Solid biofuels - Determination of total content of carbon@ hydrogen and nitrogen - Instrumental methods
PD CEN/TS 15234:2006 Solid biofuels - Fuel quality assurance
PD CEN/TS 15440:2006 Solid recovered fuels - Method for the determination of biomass content
PREN 12574-4-2015 Stationary waste containers - Part 4: Waste-Mechatronics
PD CEN/TS 15590:2007 Solid recovered fuels - Determination of the biomass content based on the 14C method

Danish Standards Foundation, Solid Matter Instruments

DS/ISO 29541:2011 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen content - Instrumental method
DS/EN 15104:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
DS/EN 130200+A3:1999 Sectional Specification: Fixed Tantalum Capacitors with Non-Solid or Solid Electrolyte
DS/CEN/TR 15569:2009 Solid biofuels - A guide for a quality assurance system
DS/EN 60384-26:2010 Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
DS/EN 15440/AC:2012 Solid recovered fuels - Methods for the determination of biomass content
DS/EN 15440:2011 Solid recovered fuels - Methods for the determination of biomass content
DS/ISO 21644:2021 Solid recovered fuels – Methods for the determination of biomass content
DS/EN IEC 60384-24:2021 Fixed capacitors for use in electronic equipment – Part 24: Sectional specification – Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
DS/EN ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument
DS/EN ISO 15212-2/AC:2009 Oscillation-type density meters - Part 2: Process instruments for homogenous liquids
DS/EN ISO 15212-2:2002 Oscillation-type density meters - Part 2: Process instruments for homogenous liquids
DS/EN 60384-4:2007 Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte
DS/EN 60384-24:2007 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte
DS/EN 60384-25:2007 Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
DS/EN IEC 60384-25:2021 Fixed capacitors for use in electronic equipment – Part 25: Sectional specification: Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
DS/CEN/TR 15591:2007 Solid recovered fuels - Determination of the biomass content based on the 14C method
DS/EN 60384-18:2007 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte

Lithuanian Standards Office , Solid Matter Instruments

LST EN 15104-2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
LST EN 130200+A3-2001 Sectional specification: Fixed Tantalum Capacitors with Non-Solid or Solid Electrolyte
LST EN 60384-26-2011 Fixed capacitors for use in electronic equipment -- Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte (IEC 60384-26:2010)
LST EN 15440-2011 Solid recovered fuels - Methods for the determination of biomass content
LST EN 15440-2011/AC-2011 Solid recovered fuels - Methods for the determination of biomass content
LST EN ISO 16968:2015 Solid biofuels - Determination of minor elements (ISO 16968:2015)

German Institute for Standardization, Solid Matter Instruments

DIN 51724-3:2012 Solid mineral fuels - Determination of sulfur content - Part 3: Instrumental methods
DIN 51724-3:2012-07 Solid mineral fuels - Determination of sulfur content - Part 3: Instrumental methods
DIN 51724-3:2008 Solid mineral fuels - Determination of sulfur - Part 3: Instrumental methods
DIN 51732:2014 Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
DIN 51732:2007 Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
DIN 51732:2014-07 Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
DIN EN 130200:1993 Sectional specification: fixed tantalum capacitors with solid or non-solid electrolyte; German version EN 130200:1993
DIN IEC 60384-15:1991 Fixed capacitors for use in electronic equipment; part 15: sectional specification: fixed tantalum capacitors with non-solid and solid electrolyte; identical with IEC 60384-15:1982 (status as of 1987)
DIN EN 130200/A3:1998 Sectional specification: Fixed tantalum capacitors with solid or non-solid electrolyte; Amendment A3; German version EN 130200/A3:1998
DIN EN 60384-15:2018-02 Fixed capacitors for use in electronic equipment - Part 15: Sectional specification - Fixed tantalum capacitors with non-solid or solid electrolyte (IEC 60384-15:2017); German version EN 60384-15:2017 / Note: DIN IEC 60384-15 (1991-11) remains valid al...
DIN EN ISO 18123:2023-07 Solid biofuels - Determination of volatile matter (ISO 18123:2023); German version EN ISO 18123:2023
DIN EN IEC 60384-26 Berichtigung 1:2020-11 Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte (IEC 60384-26:2018/COR1:2020); German version EN IEC 60384-26:2018/AC:2020-05
DIN EN IEC 60384-26:2019-03 Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte (IEC 60384-26:2018); German version EN IEC 60384-26:2018 / Note: DIN EN 60384-26 (20...
DIN 51904:2012-11 Testing of carbonaceous materials - Determination of water content - Solid matters
DIN IEC 60384-15-1:1991 Fixed capacitors for use in electronic equipment; part 15: blank detail specification: fixed tantalum capacitors with non-solid electrolyte and foil electrode; assessment level E; identical with IEC 60384-15-1:1984
DIN IEC 60384-15-2:1991 Fixed capacitors for use in electrical equipment; part 15: blanc detail specification: fixed tantalum capacitors with non-solid electrolyte and porous anode; assessement level E; identical with IEC 60384-15-2:1984
DIN IEC 60384-15-3:1991 Fixed capacitors for use in electronic equipment; part 15: blanc detail specification: fixed tantalum capacitors with solid electrolyte and porous anode; assessment level E; identical with IEC 60384-15-3:1984
DIN EN 15104:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods; German version EN 15104:2011
DIN EN IEC 62372:2023-03 Nuclear instrumentation - Housed scintillators - Test methods of light output and intrinsic resolution (IEC 62372:2021); German version EN IEC 62372:2022
DIN CEN/TS 17021:2017-05*DIN SPEC 33976:2017-05 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques; German version CEN/TS 17021:2017
DIN 51904:2012 Testing of carbonaceous materials - Determination of water content - Solid matters
DIN 51903:2012-11 Testing of carbonaceous materials - Determination of ash value - Solid materials
DIN 51720:2001 Testing of solid fuels - Determination of volatile matter content
DIN EN IEC 60384-24:2022-12 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte (IEC 60384-24:2021); German version EN IEC 60384-24:2021 / Note: DIN EN...
DIN EN IEC 60384-25:2022-12 Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte (IEC 60384-25:2021); German version EN IEC 60384-25:2021 / Note: DIN E...
DIN EN ISO 7726:2021-03 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001
DIN 51938:2015-09 Testing of carbonaceous materials - Determination of particle size distribution by sieving - Solid matters
DIN EN ISO 15212-2 Berichtigung 1:2009-07 Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids (ISO 15212-2:2002); German version EN ISO 15212-2:2002, Corrigendum to DIN EN ISO 15212-2:2002-07; German version EN ISO 15212-2:2002/AC:2009
DIN EN ISO 15212-2:2002-07 Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids (ISO 15212-2:2002); German version EN ISO 15212-2:2002
DIN 51912:1998 Testing of carbon materials - Determination of hydrogen content - Solid matters

Standard Association of Australia （SAA）, Solid Matter Instruments

AS 1678.9C1:1993 Environmentally hazardous substances, N.O.S.. Liquid, solid

Anhui Provincial Standard of the People's Republic of China, Solid Matter Instruments

DB34/T 3786-2021 Classification of solid biomass fuels

Fujian Provincial Standard of the People's Republic of China, Solid Matter Instruments

DB35/T 1398-2013 Biomass solid briquettes

HU-MSZT, Solid Matter Instruments

PL-PKN, Solid Matter Instruments

PN G04560-1992 Solid fuels. Determination of moisture, volatile matter and ash with the use of the LECO automatic analyser

农业农村部, Solid Matter Instruments

NY/T 2909-2016 Biomass solid pellet fuel quality classification

Indonesia Standards, Solid Matter Instruments

SNI 06-2413-2002 Test methods for solid matter content in water
SNI 04-6924.4-2002 Fixed capacitors for use in electronic equipment - Part 4: Sectional specification aluminium electrolytic capacitors with solid and non solid electrolytic

Taiwan Provincial Standard of the People's Republic of China, Solid Matter Instruments

CNS 4856-1998 Fixed capacitors of aluminium electrolytic for use in electronic equipment (solid and non-solid electrolyte)
CNS 4858-1998 Fixed tantalum capacitors for use in electronic equipment (non-solid or solid electrolyte)
CNS 5474-1980 Method of Test for Porosity of Body and Imperfections of Glaze for Porcelain Laboratory Apparatus

Professional Standard - Forestry, Solid Matter Instruments

LY/T 2379-2014 Woody-based biomass densified fuels
LY/T 2378-2014 General technical specification of the woody biomass solid molding stove

ES-AENOR, Solid Matter Instruments

UNE 32-004-1984
UNE 32-019-1985
UNE 77-202-1991 Air quality. Determination of gaseous sulphur compounds in ambient air Sampling equipment

Professional Standard - Agriculture, Solid Matter Instruments

NY/T 1915-2010 Densified biofuel-Terminology and definitions
NY/T 1878-2010 Specification for densified biofuel
NY/T 1879-2010 Densified biofuel-Methods for sampling
NY/T 1880-2010 Densified biofuel-Methods for sample preparation
NY/T 1882-2010 Technical conditions for densified biofuel molding equipment
NY/T 1883-2010 Testing method for densified biofuel molding equipment

GB-REG, Solid Matter Instruments

REG 46 CFR PART 148-2010 CARRIAGE OF SOLID HAZARDOUS MATERIALS IN BULK

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Solid Matter Instruments

GB/T 21923-2008 General testing rules for solid biofuels
GB/T 28730-2012 Method for preparation of solid biofuels sample
GB/T 28732-2012 Determination of total sulfur in solid biofuels
GB/T 28731-2012 Proximate analysis of solid biofuels
GB/T 7213-2003 Fixed capacitors for use in electronic equipment-Part 15:Sectional specification-Fixed tantalum capacitors with non-solid or solid electrolyte
GB/T 5993-2003 Fixed capacitors for use in electronic equipment Part 4:Sectional specification Aluminium electrolytic capacitors with solid and non-solid electrolyte
GB/T 30725-2014 Determination of ash composition in solid biofuels
GB/T 30729-2014 Determination of chlorine in solid biofuels
GB/T 28734-2012 Determination of carbon and hydrogen in solid biofuels
GB/T 28733-2012 Determination of total moisture for solid biofuels
GB/T 30727-2014 Determination of calorific value for solid biofuels
GB/T 30728-2014 Determination of nitrogen in solid biofuels
GB/T 43220-2023 Method for determination of arsenic in solid biomass fuels
GB 9583-1988 Detail specification for electronic components CA type solid electrolyte fixed tantalum capacitors
GB/T 17206-1998 Fixed capacitors for use in electronic equipment. Part 18: Sectional specification. Fixed aluminium electrolytic chip capacitors with solid (MnO2) and non-solid electrolyte
GB/T 21755-2008 Chemical products for industrial use.Determination of oxidizing properties of solids
GB/T 30726-2014 Determination of ash fusibility of solid biofuels
GB/T 23766-2009 Solid hazardous materials.General method for the determination of impact sensitivity
GB/T 19587-2017 Determination of the specific surface area of solids by gas adsorption using the BET method
GB/T 19587-2004 Determination of the specific surface area of solids by gas adsorption using the BET method

SE-SIS, Solid Matter Instruments

SIS SS CECC 30200-1986 Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
SIS SS CECC 30300-1989 Sectional specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte

CENELEC - European Committee for Electrotechnical Standardization, Solid Matter Instruments

EN 130300:1998 Sectional Specification: Aluminium Electrolytic Capacitors with Solid and Non-Solid Electrolyte
EN 50020:1994 Electrical Apparatus for Potentially Explosive Atmospheres - Intrinsic Safety 'i'
EN 60384-24:2006 Fixed capacitors for use in electronic equipment Part 24: Sectional specification – Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte

TN-INNORPI, Solid Matter Instruments

NT 14.30-1983

YU-JUS, Solid Matter Instruments

JUS ISO 124:1994 Rubber latices - Determination of total solids content
JUS N.R2.503-1983 Aluminium electrolytic capacitors with solid and non-solid electrolyte. Selection of methods of test and general reguiremen ts

Guizhou Provincial Standard of the People's Republic of China, Solid Matter Instruments

DB52/T 807-2013 CA45 type chip solid electrolyte tantalum fixed capacitor
DB52/T 929-2014 CA90 Large Capacity Non-Solid Electrolyte Tantalum Fixed Capacitor
DB52/T 1421-2019 Biomass solid briquette fuel for industrial boilers
DB52/T 928-2014 CA45S Type Bottom Electrode Chip Type Solid Electrolyte Tantalum Fixed Capacitor

未注明发布机构, Solid Matter Instruments

GJB 63C-2015 General specification for solid electrolyte tantalum fixed capacitors
BS EN IEC 60384-26:2018(2020) Fixed capacitors for use in electronic equipment Part 26 : Sectional specification — Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
BS EN 130300:1998 Harmonized system ofquality assessment for electronic components Sectional specification : Aluminium electrolytic capacitors with solid and non - solid electrolyte
BS EN 15440:2011(2012) Solid recovered fuels — Methods for the determination of biomass content
BS EN ISO 7726:2001(2002) Ergonomics of the thermal environment — Instruments for measuring physical quantities

Military Standard of the People's Republic of China-General Armament Department, Solid Matter Instruments

GJB 10175-2021 General specification for solid electrolytic aluminum fixed capacitors
GJB 2283A-2014 General specification for chip solid-electrolytic fixed tantalum capacitors
GJB 1312-1991 General specification for non-solid electrolytic tantalum capacitors
GJB 1312A-2001 General specification for non-solid electrolytic tantalum capacitors
GJB 7393-2011 General specification for solid-electrolyte oxygen sensors
GJB 1520-1992 General specification for non-hermetic solid electrolytic tantalum capacitors
GJB 733A-1996 General specification for non-solid electrolyte tantalum fixed capacitors with reliability indicators
GJB 733-1989 General specification for non-solid electrolyte fixed tantalum capacitors with reliability indicators

GOSTR, Solid Matter Instruments

GOST R 58227-2018 Solid mineral fuel. Method for determination of mineral matter
GOST R 58914-2020 Solid mineral fuel. Determination of water-soluble matter content and composition

Society of Automotive Engineers (SAE), Solid Matter Instruments

SAE AIR1168/9-2004 Thermophysical Properties of the Natural Environment, Gases, Liquids, and Solids
SAE AIR1168/9A-2011 Thermophysical Properties of the Natural Environment, Gases, Liquids, and Solids

JP-JEITA, Solid Matter Instruments

JEITA RC 2461-2007 Fixed capacitors for use in electronic equipment - Sectional specification - aluminium electrolytic capacitors with onductive polymer solid electrolyte

International Electrotechnical Commission (IEC), Solid Matter Instruments

IEC 60384-26:2018 RLV Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
IEC 60384-18:1993 Fixed capacitors for use in electronic equipment; part 18: sectional specification: fixed aluminium electrolytic chip capacitors with solid and non-solid electrolyte
IEC 60384-15:1982 Fixed capacitors for use in electronic equipment. Part 15 : Sectional specification : Fixed tantalum capacitors with non-solid or solid electrolyte
IEC 60384-15:2017 Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
IEC 60384-15:1982/AMD1:1987 Fixed capacitors for use in electronic equipment. Part 15 : Sectional specification : Fixed tantalum capacitors with non-solid or solid electrolyte
IEC 60384-15:1982/AMD2:1992 Fixed capacitors for use in electronic equipment; part 15: sectional specification: fixed tantalum capacitors with non-solid or solid electrolyte; amendment 2
IEC 60384-4:1998 Fixed capacitors for use in electronic equipment - Part 4: Sectional specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte
IEC 60384-4:1985 Fixed capacitors for use in electronic equipment. Part 4 : Sectional specifications: Aluminium electrolytic capacitors with solid or non-solid electrolyte
IEC 60384-4:2016 Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors with solid (MnO₂) and non-solid electrolyte
IEC 60384-24:2021 RLV Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
IEC 60384-25:2021 RLV Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
IEC 60384-25:2021 Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
IEC 60384-4-1:1985 Fixed capacitors for use in electronic equipment. Part 4 : Sectional specification : Aluminium electrolytic capacitors with solid or non-solid electrolyte. Selection of methods of test and general requirements. Blank detail specification: Aluminium electr
IEC 60384-4:2007 Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Aluminium electrolytic capacitors with solid (MnO<(Index)2>) and non-solid electrolyte
IEC 60384-26:2010 Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
IEC 60384-26:2018 Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
IEC 60384-4/AMD1:2000 Fixed capacitors for use in electronic equipment - Part 4: Sectional specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte; Amendment 1
IEC 60384-18/AMD1:1998 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification: Fixed aluminium electrolytic chip capacitors with solid and non-solid electrolyte; Amendment 1
IEC 60384-18:2007 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO<(Index)2>) and non-solid electrolyte
IEC 60384-24:2021 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
IEC 60384-26:2018/COR1:2020 Corrigendum 1 - Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
IEC 62755:2012/AMD1:2020 Radiation protection instrumentation - Data format for radiation instruments used in the detection of illicit trafficking of radioactive materials

Professional Standard - Electron, Solid Matter Instruments

SJ/T 9503.2-1991 Tantalum capacitors with solid electrolyte--Quality grading standard
SJ/T 9503.1-1991 Non-solid aluminium electrolyte capacitors--Quality grading standard
SJ/T 9503.3-1991 Tantalum capacitors with no-solid electrolyte--Quality grading standard
SJ/T 9560.19-1993 Sealed solid micro-relay--Quality grading standard
SJ/T 9560.21-1993 Sealed miniature solid relay--Quality grading standard
SJ 20210-1992 Capacitors,electrolytic(solid electrolyte),Tantalum (Polarized sintered slug) Type CA420,Detail specification for
SJ/T 9560.20-1993 Sealed sub-miniature solid relay--Quality grading standard
SJ/T 9560.23-1993 Unsealed miniature solid relay--Quality grading standard
SJ 20209-1992 Detaio specification for capacitors,electrolytic(non-solid electrolyte), Tantalum,Type CA300
SJ 1018-1975 Fixed tubular tantalum capacitors with non-solid electrolyte and porous andode for Type CA30
SJ 51312/1-2003 Capacitors,electrolytic (nonsolid electrolyte),tantalum,style CA301,detail specification for

RO-ASRO, Solid Matter Instruments

STAS 5268-1990 SOLID FUELS Volatile matters, coke and fixed coal determination
STAS 10274/15-1975 SOLID FUELS Ash analysis Determination of non-burnt combustible matter

American Society of Mechanical Engineers (ASME), Solid Matter Instruments

ASME PTC 19.16-1965 Instruments and apparatus - Part 16: Density Determinations solids and liquids

American Society for Testing and Materials (ASTM), Solid Matter Instruments

ASTM D5907-13 Standard Test Methods for Filterable Matter lpar;Total Dissolved Solidsrpar; and Nonfilterable Matter lpar;Total Suspended Solidsrpar; in Water
ASTM E1756-95 Standard Test Method for Determination of Total Solids in Biomass
ASTM E1756-01 Standard Test Method for Determination of Total Solids in Biomass
ASTM D6010-96 Standard Practice for Closed Vessel Microwave Solvent Extraction of Organic Compounds from Solid Matrices
ASTM E2776-18 Standard Guide for Correlation of Results of Solid Particle Size Measurement Instruments
ASTM E2776-20 Standard Guide for Correlation of Results of Solid Particle Size Measurement Instruments
ASTM D4359-90(2006) Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
ASTM D5907-18 Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water
ASTM D4359-90(2012) Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
ASTM E1756-08(2020) Standard Test Method for Determination of Total Solids in Biomass
ASTM E1756-08(2015) Standard Test Method for Determination of Total Solids in Biomass
ASTM E1756-08 Standard Test Method for Determination of Total Solids in Biomass

Defense Logistics Agency, Solid Matter Instruments

DLA DSCC-DWG-06014 REV B-2012 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM
DLA DSCC-DWG-06015 REV B-2012 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM
DLA DSCC-DWG-10004 REV A-2011 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED SLUG)
DLA DSCC-DWG-10004 REV B-2012 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED SLUG )
DLA DSCC-DWG-13017-2013 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED SLUG)
DLA DSCC-DWG-10004 REV D-2013 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED SLUG )
DLA DSCC-DWG-13017 REV B-2013 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED SLUG)
DLA DSCC-DWG-10004 REV B-2009 CAPACITORS FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED SLUG)
DLA QPL-39003-92-2007 CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILILTY, GENERAL SPECIFICATION FOR
DLA QPL-3965-75-2005 CAPACITOR, FIXED ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, GENERAL SPECIFICATION FOR
DLA QPL-39003-92 NOTICE 1-2008 Capacitors, Fixed, Electrolytic (Solid Electrolyte) Tantalum, Established Reliability, General Specification for
DLA DSCC-DWG-05017 REV B-2012 CAPACITORS, FIXED ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM ANODE AND CATHODE
DLA QPL-39006-116 NOTICE 1-2008 Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum, Established Reliability, General Specification for
DLA DSCC-DWG-93026 REV P-2008 CAPACITORS FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED, SINTERED SLUG)
DLA DSCC-DWG-93026 REV R-2010 CAPACITORS FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED, SINTERED SLUG)

ES-UNE, Solid Matter Instruments

UNE-EN ISO 18123:2016 Solid biofuels - Determination of the content of volatile matter (ISO 18123:2015)
UNE-EN 61577-3:2014 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 3: Specific requirements for radon decay product measuring instruments (Endorsed by AENOR in January of 2015.)
UNE-EN 60384-15:2017 Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte (Endorsed by Asociación Española de Normalización in October of 2017.)
UNE-EN 61577-2:2017 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specific requirements for 222Rn and 220Rn measuring instruments (Endorsed by Asociación Española de Normalización in September of 2017.)
UNE-EN IEC 60384-26:2018/AC:2020-05 Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte (Endorsed by Asociación Española de Normalización in June of 2020.)
UNE-EN IEC 60384-26:2018 Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte (Endorsed by Asociación Española de Normalización in September of 2018.)
UNE-EN 62534:2015 Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material (Endorsed by AENOR in January of 2016.)
UNE-EN 62533:2016 Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material (Endorsed by AENOR in April of 2016.)
UNE-EN ISO 22167:2022 Solid recovered fuels - Determination of content of volatile matter (ISO 22167:2021)
UNE-EN ISO 21644:2022 Solid recovered fuels - Methods for the determination of biomass content (ISO 21644:2021, Corrected version 2021-03)
UNE-EN 60384-4:2016 Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte (Endorsed by AENOR in December of 2016.)
UNE-EN ISO 15212-2:2002/AC:2010 Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids (ISO 15212-2:2002/Cor 1:2008)
UNE-EN ISO 19743:2018 Solid biofuels - Determination of content of heavy extraneous materials larger than 3,15 mm (ISO 19743:2017)
UNE-EN IEC 60384-25:2021 Fixed capacitors for use in electronic equipment - Part 25: Sectional specification: Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte (Endorsed by Asociación Española de Normalización in October of 2021.)
UNE-EN 60384-24:2015/AC:2017-01 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte (Endorsed by Asociación Española de Normalización in March of 2017.)
UNE-EN 60384-24:2015 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte (Endorsed by AENOR in November of 2015.)
UNE-EN IEC 60384-25:2021/AC:2023-05 Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte (Endorsed by Asociación Española de Normalización in June of 2023.)
UNE-EN IEC 60384-24:2021 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte (Endorsed by Asociación Española de Normalización in October of 2021.)
UNE-EN 60384-25:2015 Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte (Endorsed by AENOR in November of 2015.)

Group Standards of the People's Republic of China, Solid Matter Instruments

T/HAEPCI 018-2020 Technical specification for biomass solid briquetting fuels
T/CAGHP 016-2018 Provisions on Physical Interface of Geological Hazard Monitoring Instruments (Trial)
T/GDACERCU 0017-2021 Requirements on collection, storage and transportation of municipal biomass solid waste for fuel

Liaoning Provincial Standard of the People's Republic of China, Solid Matter Instruments

DB21/T 2786-2017 Biomass solid briquette fuel technical conditions

IECQ - IEC: Quality Assessment System for Electronic Components, Solid Matter Instruments

QC 300301/ SE 0001-1989 Aluminium Electrolytic Capacitors with Non-Solid Electrolyte
PQC 1-1997 Fixed Capacitors for Use in Electronic Equipment Sectional Specification: Fixed Niobium Capacitors with Solid Electrolyte
QC 300201/GB 0001 ISSUE 1-1984 Fixed Tantalum Capacitors with Solid Electrolyte and Porous Anode
QC 300301/ SU 0001-1990 Electronic Components Fixed Aluminium Electrolytic Capacitors with Non-Solid Electrolyte Type K50-53
QC 300301/ KR 0006-1990 Electronic Components Aluminium Electrolytic Capacitors with Non-Solid Electrolyte
QC 300301/ KR 0001-1984 Electronic Components Aluminium Electrolytic Capacitors with Non-Solid Electrolyte
QC 300301/ KR 0003-1985 Electronic Components Aluminium Electrolytic Capacitors with Non-Solid Electrolyte
QC 300301/ KR 0002-1985 Electronic Components Aluminium Electrolytic Capacitors with Non-Solid Electrolyte
QC 300301/ KR 0005-1987 Electronic Components Aluminium Electrolytic Capacitors with Non-Solid Electrolyte
QC 300301/ KR 0004-1987 Electronic Components Aluminium Electrolytic Capacitors with Non-Solid Electrolyte
QC 300201/ JP 0002-1984 Detail Specification for Electronic Components Fixed Tantalum Capacitors with Solid Electrolyte
QC 300202/GB 0001 ISSUE 1-1985 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anodes
PQC 31-1984 Fixed Capacitors for Use in Electronic Equipment: Sectional Specification: Fixed Tantalum Chip Capacitors with Solid Electrolyte
QC 300201/ CN 0003-1993 Fixed Tantalum Electrolytic Capacitors with Solid Electrolyte Type CA - 1 Assessment Level E
QC 302300-1993 Fixed Capacitors for Use in Electronic Equipment Part 18: Sectional Specification: Fixed Aluminium Electrolytic Chip Capacitors with Solid and Non-Solid Electrolyte (IEC 384-18 ED 1)

AENOR, Solid Matter Instruments

UNE 32105:1995 SOLID MINERAL FUELS. DETERMINATION OF GROSS CALORIFIC VALUE BY THE CALORIMETER BOMB METHOD.
UNE 32006:1995 SOLID MINERAL FUELS. DETERMINATION OF GROSS CALORIFIC VALUE BY AUTOMATIC CALORIMETER.
UNE-EN 15440:2012 Solid recovered fuels - Methods for the determination of biomass content
UNE 55711:1992 TECHNICAL FATTY CHAIN QUATERNARY AMMONIUM CHLORIDES. DETERMINATION OF NONVOLATILE MATTER (SOLIDS).

国家能源局, Solid Matter Instruments

NB/T 10763-2021 Determination of heavy metal mercury in solid biomass fuel by solid injection direct method

TH-TISI, Solid Matter Instruments

TIS 1904-1999 Fixed capacitors for use in electronic equipment.part 15: sectional specification: fixed tantalum capacitors with non.solid or solid electrolyte

Korean Agency for Technology and Standards (KATS), Solid Matter Instruments

KS C IEC 60384-15:2008 Fixed capacitors for use in electronic equipment－Part 15：Sectional specification－Fixed tantalum capacitors with non-solid or solid electrolyte
KS C IEC 60384-15:2019 Fixed capacitors for use in electronic equipment — Part 15:Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
KS C IEC 62534-2012(2017) Radiation protection instrumentation－Highly sensitive hand-held instruments for neutron detection of radioactive material
KS E ISO 15239:2007 Solid mineral fuels－Evaluation of the measurement performance of on-line analysers
KS C IEC 60384-24-2009(2015) Fixed capacitors for use in electronic equipment－Part 24：Sectional specification－Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte
KS C IEC 60384-25-2009(2015) Fixed capacitors for use in electronic equipment－Part 25：Sectional specification－Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
KS C IEC 62534-2012(2022) Radiation protection instrumentation－Highly sensitive hand-held instruments for neutron detection of radioactive material
KS C 6384-18-2001 Fixed capacitors for use in electronic equipment－Part 18： Sectional specification：Fixed aluminium electrolytic chip capacitors with solid(MnO2) and non-solid electrolyte
KS C 0904-1995(2000) TEST TO PROVE PROTECTION AGAINST INGRESS OF WATER FOR ELECTRICALEQUIPMENT
KS C 0904-1985 TEST TO PROVE PROTECTION AGAINST INGRESS OF WATER FOR ELECTRICALEQUIPMENT
KS C IEC 60384-24:2021 Fixed capacitors for use in electronic equipment —Part 24: Sectional specification — Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
KS H ISO 1742:2008 Glucose syrups－Determination of dry matter－Vacuum oven method
KS C IEC 60384-4:2005 Fixed capacitors for use in electronic equipment－Part 4：Sectional specification：Aluminium electrolytic capacitors with solid and non－solid electrolyte
KS C IEC 60384-4-2023 Fixed capacitors for electronic equipment Part 4: Aluminum electrolytic capacitors with solid (MnO2) and non-solid electrolytes specified
KS C IEC 60384-25:2021 Fixed capacitors for use in electronic equipment —Part 25: Sectional specification — Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
KS C 6372-2002 FIXED TANTALUM ELECTOLYTIC CHIP CAPACITORS WITH SOLID ELECTROLYTE FOR USE IN ELECTRONIC EQUIPMENT
KS C IEC 60384-4:2018 Fixed capacitors for use in electronic equipment — Part 4: Sectional specification — Aluminium electrolytic capacitors with solid(MnO2) and non-solid electrolyte
KS H ISO 1743:2008 Glucose syrup－Determination of dry matter content－Refractive index method

Japanese Industrial Standards Committee (JISC), Solid Matter Instruments

JIS C 5101-15:1998 Fixed capacitors for use in electronic equipment Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
JIS C 5101-18:1999 Fixed capacitors for use in electronic equipment Part 18: Sectional specification: Fixed aluminium electrolytic chip capacitors with solid (MnO2) and non-solid electrolyte
JIS C 5101-4:2019 Fixed capacitors for use in electronic equipment -- Part 4: Sectional specification -- Fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte
JIS C 5101-26:2021 Fixed capacitors for use in electronic equipment -- Part 26: Sectional specification -- Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
JIS C 5101-4:2010 Fixed capacitors for use in electronic equipment -- Part 4: Sectional specification -- Aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte
JIS C 5101-18:2010 Fixed capacitors for use in electronic equipment -- Part 18: Sectional specification -- Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte
JIS C 5101-18:2019 Fixed capacitors for use in electronic equipment -- Part 18: Sectional specification -- Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte
JIS C 5101-4:1998 Fixed capacitors for use in electronic equipment Part 4: Sectional specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte
JIS C 5101-26:2012 Fixed capacitors for use in electronic equipment -- Part 26: Sectional specification -- Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte

ECIA - Electronic Components Industry Association, Solid Matter Instruments

EIA-60384-15-2014 Fixed Capacitors for Use in Electronic Equipment – Part 15: Sectional Specification – Fixed Tantalum Capacitors with Non-Solid or Solid Electrolyte
EIA-60384-26-2014 Fixed Capacitors for Use in Electronic Equipment – Part 26: Sectional Specification – Fixed Aluminium Electrolytic Capacitors with Conductive Polymer Solid Electrolyte
535ACAA-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode
535ACAD-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode
535ACAC-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode
535ACAB-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode
EIA-60384-4-2017 Fixed Capacitors for Use in Electronic Equipment - Part 4: Sectional Specification – Fixed Aluminium Electrolytic Capacitors with Solid (MnO2) and Non-solid Electrolyte
EIA-60384-4-2014 Fixed Capacitors for Use in Electronic Equipment – Part 4: Sectional Specification – Aluminium Electrolytic Capacitors with Solid (MnO2) and Non-Solid Electrolyte
EIA-60384-25-2014 Fixed Capacitors for Use in Electronic Equipment – Part 25: Sectional Specification – Surface Mount Fixed Aluminium Electrolytic Capacitors with Conductive Polymer Solid Electrolyte
EIA-60384-24-2017 Fixed Capacitors for Use in Electronic Equipment - Part 24: Sectional Specification - Fixed Tantalum Electrolytic Surface Mount Capacitors with Conductive Polymer Solid Electrolyte
EIA-60384-24-2014 Fixed Capacitors for Use in Electronic Equipment – Part 24: Sectional Specification – Surface Mount Fixed Tantalum Electrolytic Capacitors with Conductive Polymer Solid Electrolyte
535ABAD-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode
535ABAC-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode
535ABAA-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode
535ABAB-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode
EIA-60384-18-2014 Fixed Capacitors for Use in Electronic Equipment – Part 18: Sectional Specification – Fixed Aluminium Electrolytic Surface Mount Capacitors with Solid (MnO2) and Non-Solid Electrolyte
EIA-60384-25-2017 Fixed Capacitors for Use in Electronic Equipment - Part 25: Sectional Specification: Fixed Aluminium Electrolytic Surface Mount Capacitors with Conductive Polymer Solid Electrolyte
EIA-60384-18-2017 Fixed Capacitors for Use in Electronic Equipment - Part 18: Sectional Specification - Fixed Aluminium Electrolytic Surface Mount Capacitors with Solid (MnO2) and Non-solid Electrolyte

KR-KS, Solid Matter Instruments

KS C IEC 60384-15-2019 Fixed capacitors for use in electronic equipment — Part 15:Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
KS C IEC 60384-4-2018(2023) Fixed capacitors for use in electronic equipment — Part 4: Sectional specification — Aluminium electrolytic capacitors with solid(MnO2) and non-solid electrolyte
KS C IEC 60384-24-2021 Fixed capacitors for use in electronic equipment —Part 24: Sectional specification — Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
KS C IEC 60384-25-2021 Fixed capacitors for use in electronic equipment —Part 25: Sectional specification — Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
KS C IEC 60384-4-2018 Fixed capacitors for use in electronic equipment — Part 4: Sectional specification — Aluminium electrolytic capacitors with solid(MnO2) and non-solid electrolyte
KS C IEC 60384-18-2018(2023) Fixed capacitors for use in electronic equipment — Part 18: Sectional specification — Fixed aluminium electrolytic surface mount capacitors with solid(MnO 2 ) and non-solid electrolyte

Electronic Components, Assemblies and Materials Association, Solid Matter Instruments

ECA 535ACAA-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode
ECA 535ACAB-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode
ECA 535ACAC-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode
ECA 535ACAD-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode
ECA 535ABAA-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode
ECA 535ABAB-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode
ECA 535ABAC-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode
ECA 535ABAD-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode

European Committee for Electrotechnical Standardization（CENELEC）, Solid Matter Instruments

EN 60384-15:2017 Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
EN 60384-26:2010 Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
EN IEC 60384-26:2018 Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
EN 62533:2016 Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material
EN 62534:2015 Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material
EN 60384-18:2007 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte
EN 60384-18:2016 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte
EN IEC 60384-24:2021 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
EN IEC 60384-25:2021 Fixed capacitors for use in electronic equipment - Part 25: Sectional specification: Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
EN 60384-24:2015 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
EN 60384-25:2015 Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte

VN-TCVN, Solid Matter Instruments

TCVN 6749-4-2000 Fixed capacitors for use in electronic equipment.Part 4: Sectional specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte
TCVN 7733-2007 Water quality.Effluent standards for leachate of solid waste landfill sites

PT-IPQ, Solid Matter Instruments

NP 3869-1999 Solid fuels.Coals.Determination of mineral matter content

Professional Standard - Energy, Solid Matter Instruments

NB/T 34025-2015 Test method for solid biofuel of clinkering property

Sichuan Provincial Standard of the People's Republic of China, Solid Matter Instruments

DB51/T 1387-2011 Method for determination of calorific value of solid biomass fuel
DB51/T 1868-2014 Safety technical requirements for biomass solid briquette fuel press

Professional Standard - Military and Civilian Products, Solid Matter Instruments

WJ 2643-2004 Specification for conductivity standard material of solid propellants and explosives
WJ 2642-2004 Standard material specification for dielectric constant of solid propellants and explosives

ET-QSAE, Solid Matter Instruments

ES A.C2.002-1973

Electronic Components, Assemblies and Materials Association, Solid Matter Instruments

ECA EIA-60384-15-2014 Fixed Capacitors for Use in Electronic Equipment - Part 15: Sectional Specification - Fixed Tantalum Capacitors with Non-Solid or Solid Electrolyte
ECA EIA-60384-26-2014 Fixed Capacitors for Use in Electronic Equipment - Part 26: Sectional Specification - Fixed Aluminium Electrolytic Capacitors with Conductive Polymer Solid Electrolyte
ECA EIA-60384-4-2014 Fixed Capacitors for Use in Electronic Equipment - Part 4: Sectional Specification - Aluminium Electrolytic Capacitors with Solid (MnO2) and Non-Solid Electrolyte
ECA EIA-60384-18-2014 Fixed Capacitors for Use in Electronic Equipment - Part 18: Sectional Specification - Fixed Aluminium Electrolytic Surface Mount Capacitors with Solid (MnO2) and Non-Solid Electrolyte
ECA EIA-60384-25-2014 Fixed Capacitors for Use in Electronic Equipment - Part 25: Sectional Specification - Surface Mount Fixed Aluminium Electrolytic Capacitors with Conductive Polymer Solid Electrolyte
ECA EIA-60384-24-2014 Fixed Capacitors for Use in Electronic Equipment - Part 24: Sectional Specification - Surface Mount Fixed Tantalum Electrolytic Capacitors with Conductive Polymer Solid Electrolyte

国家市场监督管理总局、中国国家标准化管理委员会, Solid Matter Instruments

GB/T 6346.24-2021 Fixed capacitors for use in electronic equipment—Part 24: Sectional specification—Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
GB/T 39197-2020 Principle and requirement for material flow data collection of general solid waste

Professional Standard - Environmental Protection, Solid Matter Instruments

HJ 1222-2021 Gravimetric method for determination of moisture and dry matter content of solid waste
HJ 761-2015 Solid waste-Determination of organic matter-Ignition loss method
HJ 976-2018 Determination of Benzene Series in Solid Waste by Headspace Gas Chromatography-Mass Spectrometry
HJ 951-2018 Determination of semi-volatile organic compounds in solid waste by gas chromatography-mass spectrometry
HJ 766-2015 Solid Waste–Determination of metals–Inductively coupled plasma mass spectrometry (ICP-MS)
HJ 891-2017 Determination of Polychlorinated Biphenyls in Solid Waste by Gas Chromatography-Mass Spectrometry
HJ 950-2018 Determination of Polycyclic Aromatic Hydrocarbons in Solid Waste by Gas Chromatography-Mass Spectrometry
HJ 643-2013 Solid waste -Determination of volatile organic compounds- Headspace-gas chromatography/mass method

IN-BIS, Solid Matter Instruments

IS 4317-1983

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Solid Matter Instruments

GB/T 34142-2017 Radiation protection instrumentation—Highly sensitive hand-held instruments for photon detection of radioactive material
GB/T 34140-2017 Radiation protection instrumentation—Highly sensitive hand-held instruments for neutron detection of radioactive material
GB/T 35905-2018 Test methods for biomass—Determination of total solids in biomass

IT-UNI, Solid Matter Instruments

UNI EN ISO 21644:2021 Solid recovered fuels - Methods for the determination of biomass content

European Standard for Electrical and Electronic Components, Solid Matter Instruments

CECC 30 801- 801 ISSUE 2-1992 Fixed Tantalum Surface Mounting Capacitors with Solid Electrolyte, Porous Anode (En)

CZ-CSN, Solid Matter Instruments

CSN 35 8291 Cast.15-1988 Fixed capacitors for usa in electronic equipment. Part 15: Sectional speoification: Fixed tantalum capacitors with non solid or solid electrolyte
CSN 35 8291 Cast.4-1988 Fixed capacitors for use in electronic equipment Part 4: Sectional specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte

Guangxi Provincial Standard of the People's Republic of China, Solid Matter Instruments

DB45/T 2479-2022 Specifications for hydrogeological engineering geological survey of general solid waste landfill

American National Standards Institute （ANSI), Solid Matter Instruments

ANSI N42.17B-1989 Performance Specifications for Health Physics Instrumentation – Occupational Airborne Radioactivity Monitoring Instrumentation

BE-NBN, Solid Matter Instruments

NBN-EN 30012-1-1994 Quality assurance requirements for measuring equipment. Part 1: Metrological confirmation system for measuring equipment (ISO 10012-1: 1992)

工业和信息化部, Solid Matter Instruments

JB/T 13809-2020 General technical conditions for in-situ testing instruments for mechanical properties of solid materials

Professional Standard - Traffic, Solid Matter Instruments

JT/T 1123-2017 Classification of materials hazardous only in bulk

United States Navy, Solid Matter Instruments

NAVY MIL-I-23413 C-1981 INSERTS, WELDING, FILLER MATERIEL, COILED AND SOLID RINGS
NAVY MIL-H-21367/19 VALID NOTICE 1-1990 HULL FITTING, CONNECTOR, ADAPTER, TYPE UG1404/U, FOR FLEXIBLE, SOLID-DIELECTRIC, RADIO-FREQUENCY CABLE

Professional Standard - Nuclear Industry, Solid Matter Instruments

EJ 280-1986 Quality standards for maintenance and commissioning of radioactive geophysical instruments for uranium mining and metallurgy
EJ 1042-2014 Containers for low and intermediate level radioactive solid waste.Steel drum
EJ 1076-2014 Container for low and intermediate level radioactive solid waste.Steel box
EJ 1076-1998 Container for low-and intermediate - level radioactive solid wastes Steel box