ZH
RU
ES

How to Test Product Viscosity

How to Test Product Viscosity, Total:72 items.

In the international standard classification, How to Test Product Viscosity involves: Protection against fire, Petroleum products in general, Construction materials, Linear and angular measurements, Metrology and measurement in general, Waxes, bituminous materials and other petroleum products, Road engineering, Structures of buildings, Graphic technology, Refractories, Construction industry.

Korean Agency for Technology and Standards (KATS), How to Test Product Viscosity

KS F 2835-2009(2014) Reaction to fire tests for building products exposed to the thermal attack by a single burning item
KS M 2014-2004(2014) Testing methods for kinematic viscosity and calculating method for viscosity index of crude oil and petroleum products
KS M 2013-2007(2017) Testing method for saybolt viscosity of crude oils and petroleum products
KS B ISO 10360-7:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 7:CMMs used for measuring
KS B ISO 10360-7:2015 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 7:CMMs used for measuring

BR-ABNT, How to Test Product Viscosity

ABNT P-MB-326-1963

British Standards Institution (BSI), How to Test Product Viscosity

BS ISO 2909:2002 Methods of test for petroleum and its products. Petroleum products. Calculation of viscosity index from kinematic viscosity
PD 6591:1996 Guidelines on how to use anechoic enclosures that do not fulfil the requirements regarding normalized site attenuation for pre-compliance tests of products
DD ISO/TS 23165:2006 Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
BS EN 12618-2:2005 Products and systems for the protection and repair of concrete structures - Test methods - Determination of the adhesion of injection products, with or without thermal cycling - Adhesion by tensile bond strength
BS EN 12618-2:2004(2005) Products and systems for the protection and repair of concrete structures - Test methods - Determination of the adhesion of injection products, with or without thermal cycling - Adhesion by tensile bond strength
BS DD ISO/TS 23165:2007 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
BS EN 13302:2003 Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of viscosity of bitumen using a rotating spindle apparatus
BS ISO 19594:2017 Graphic technology. Test method for the determination of the binding strength for perfect-bound products. Page-pull test working upwards
BS EN ISO 9493:2011 Geometrical product specifications (GPS). Dimensional measuring equipment. Dial test indicators (lever type). Design and metrological characteristics
BS EN ISO 9493:2010 Geometrical product specifications (GPS). Dimensional measuring equipment. Dial test indicators (lever type). Design and metrological characteristics
PD ISO/TS 17865:2016 Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
BS EN 1542:1999 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
BS PD ISO/TS 17865:2016 Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems

Standard Association of Australia （SAA）, How to Test Product Viscosity

AS/NZS 2341.4:2015
AS 2341.4:2023 Methods of testing bitumen and related roadmaking products, Method 4: Determination of dynamic viscosity by rotational viscometer
AS 2341.4:1994 Methods of testing bitumen and related roadmaking products - Determination of dynamic viscosity by rotational viscometer
AS 2341.3:2020 Methods of testing bitumen and related roadmaking products, Method 3: Determination of kinematic viscosity by flow through a capillary tube

German Institute for Standardization, How to Test Product Viscosity

DIN 2271:2016-12 Geometrical product specifications (GPS) - Pneumatic length measurement - Characteristics of instruments, requirements, testing
DIN ISO/TS 23165:2008-08 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty (ISO/TS 23165:2006)
DIN 2271:2016 Geometrical product specifications (GPS) - Pneumatic length measurement - Characteristics of instruments, requirements, testing
DIN 2270:2017 Geometrical product specifications (GPS) - Dial test indicators (lever type) - Maximum permissible errors
DIN ISO/TS 23165:2008 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty (ISO/TS 23165:2006)
DIN EN 12618-2:2004 Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with or without thermal cycling - Adhesion by tensile bond strength; German version EN 12618-2:2004
DIN EN 12618-2:2004-11 Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with or without thermal cycling - Adhesion by tensile bond strength; German version EN 12618-2:2004
DIN EN ISO 14253-5:2016-12 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015); German version EN ISO 14253-5:2015
DIN 51050:2000 Methods for tests for dense shaped refractory products - Determination of cold crushing strength of the intermediate zone of chemically bonded basic bricks
DIN EN 1542:1999-07 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off; German version EN 1542:1999
DIN EN 1542:1999 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off; German version EN 1542:1999
DIN EN ISO 9493:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010); German version EN ISO 9493:2010
DIN EN 12192-2:1999-07 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents; German version EN 12192-2:1999
DIN 55540-1 Beiblatt 1:1979 Testing of packaging; determining the filling ratio of prepacks; form relating to coefficients of variation for the density of the packaged material and for the package for adhesives and allied products

American Society for Testing and Materials (ASTM), How to Test Product Viscosity

ASTM D1665-20 Standard Test Method for Engler Specific Viscosity of Tar Products

PL-PKN, How to Test Product Viscosity

PN P50141-1966 Tes?ing methods for products o? paper industry De?ermination of gluing strength
PN-EN ISO 14253-5-2016-01 P Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)

IN-BIS, How to Test Product Viscosity

IS 1448 Pt.25-1976

Danish Standards Foundation, How to Test Product Viscosity

DS/ISO/TS 23165:2006 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
DS/EN 12618-2:2004 Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with or without thermal cycling - Adhesion by tensile bond strength
DS/EN 1542:1999 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off

Association Francaise de Normalisation, How to Test Product Viscosity

XP E11-170*XP ISO/TS 23165:2006 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
XP ISO/TS 23165:2006 Spécification géométrique des produits (GPS) - Lignes directrices pour l'estimation de l'incertitude d'essai des machines à mesurer tridimensionnelles (MMT)
NF E11-017:1996 Geometrical product specification (gps). Length measuring instruments. Standard wires. Specifications. Test methods.
NF E11-097:1998 Geometrical product specification (GPS). Length measuring instruments. Screw micrometers depth gauges. Specifications. Test methods.
NF P18-962-2*NF EN 12618-2:2005 Products and systems for the protection and repair of concrete structures - Test methods - Part 2 : determination of the adhesion of injection products, with our without thermal cycling - Adhesion by tensile bond strength
NF EN 12618-2:2005 Produits et systèmes pour la protection et la réparation des structures en béton - Méthodes d'essai - Partie 2 : détermination de l'adhérence des produits d'injection, après cycles thermiques ou non - Adhérence par résistance en traction
NF EN ISO 14253-5:2015 Spécification géométrique des produits (GPS) - Vérification par la mesure des pièces et des équipements de mesure - Partie 5 : incertitude liée aux essais de vérification des appareils de mesure indicateurs
NF E11-054*NF EN ISO 9493:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment : dial test indicators (lever type) - Design and metrological characteristics
NF E10-201-5*NF EN ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5 : uncertainty in verification testing of indicating measuring instruments

AENOR, How to Test Product Viscosity

UNE 208003-003:2003 IN Guidelines on how to use anechoic enclosures that do not fulfil the requirements regarding normalized site attenuation for pre-compliance tests of products.
UNE-EN 12618-2:2006 Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with our without thermal cycling - Adhesion by tensile bond strength
UNE-EN 1542:2000 Products and systems for the protection and repair of concrete structures. Test methods. Measurement of bond strength by pull-off.
UNE-EN 12192-2:1999 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES. GRANULOMETRY ANALYSIS. PART 2: TEST METHOD FOR FILLERS FOR POLYMER BONDING AGENTS.

NZ-SNZ, How to Test Product Viscosity

AS/NZS 2341.5:1997 Methods of Testing Bitumen and Related Roadmaking Products Method 5: Determination of Apparent Viscosity by 'Shell' Sliding Plate Micro-Viscometer

International Organization for Standardization (ISO), How to Test Product Viscosity

ISO/TS 23165:2006 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
ISO 19594:2017 Graphic technology - Test method for the determination of the binding strength for perfect-bound products - Page-pull test working upwards
ISO 9493:2010 Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics
ISO/TS 17865:2016 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems

YU-JUS, How to Test Product Viscosity

JUS B.H8.022-1981 Testing of petroleum products — Determination ofkinematic viscosity of transparent and opaque liquids andcalculation ofdynamic viscosity

未注明发布机构, How to Test Product Viscosity

BS 2000-72:1993 Methods of test for Petroleum and its products Part 72 . Determination of viscosity of cutback bitumen

Lithuanian Standards Office , How to Test Product Viscosity

LST EN 12618-2-2004 Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with our without thermal cycling - Adhesion by tensile bond strength
LST EN 1542-2000 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off

CEN - European Committee for Standardization, How to Test Product Viscosity

PREN 17334-2018 Glued-in rods in glued structural timber products - Testing@ requirements and bond shear strength classification

ES-UNE, How to Test Product Viscosity

UNE-EN ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015) (Endorsed by AENOR in November of 2015.)

RO-ASRO, How to Test Product Viscosity

STAS 10030-1975 PAINTS AND VARNISHES Determination of the life-time of the products with several components that are separately delivered, by testing the viscosity

European Committee for Standardization (CEN), How to Test Product Viscosity

EN 12618-2:2004 Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with or without thermal cycling Adhesion by tensile bond strength
EN ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)
EN 1542:1999 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off