ZH
RU
ES
Glow discharge is applied to
Glow discharge is applied to, Total:100 items.
In the international standard classification, Glow discharge is applied to involves: Lamps and related equipment, Analytical chemistry, Electronic tubes, Testing of metals, Non-ferrous metals, Road vehicle systems, Fibre optic communications, Optoelectronics. Laser equipment, Semiconducting materials, Semiconductor devices, Cinematography, Conducting materials, Electrical wires and cables, Coatings and related processes used in aerospace industry, Capacitors, Rubber and plastics products, Radiation protection.
RU-GOST R, Glow discharge is applied to
- GOST IEC 60155-2012 Glow-starters for fluorescent lamps
- GOST 21107.11-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for glow-discharge indicators
- GOST 21107.10-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for glow-discharge thyratrons and gas-filled rectifiers
- GOST R 41.99-1999 Uniform provisions concerning the approval of gas-discharge light sources for use in approved gas-discharge lamp units of power-driven vehicles
- GOST R ISO 16962-2012 Zinc and/or aluminium based coatings on steel. Determination of coating thickness, chemical composition and mass per unit area byglow discharge atomic emission spectrometry method
- GOST R IEC 1048-1994 Capacitors for use in tubular fluorescent and other discharge lamp circuits. General and safety requirements
- GOST IEC 1048-1995 Capacitors for use in tubular fluorescent and other discharge lamp circuits. General and safety requirements
BE-NBN, Glow discharge is applied to
British Standards Institution (BSI), Glow discharge is applied to
- BS ISO 14707:2015 Surface chemical analysis. Glow discharge optical emission spectrometry (GD-OES). Introduction to use
- BS ISO 14707:2000 Surface chemical analysis - Glow discharge optical emission spectrometry (GD-OES) - Introduction to use
- BS DD ISO/TS 15338:2009 Surface chemical analysis - Glow discharge Mass spectrometry (GD-MS) - Introduction to use
- BS ISO 14707:2021 Tracked Changes. Surface chemical analysis. Glow discharge optical emission spectrometry (GD-OES). Introduction to use
- BS ISO 16962:2017 Surface chemical analysis. Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
- BS ISO 11505:2013 Surface chemical analysis. General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry
- BS EN 50143:2009 Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1000 V but not exceeding 10000 V
- PD CISPR/TR 30-2:2012 Test method on electromagnetic emissions. Electronic control gear for discharge lamps excluding fluorescent lamps
Association Francaise de Normalisation, Glow discharge is applied to
- NF ISO 14707:2006 Analyse chimique des surfaces - Spectrométrie d'émission optique à décharge luminescente - Introduction à son emploi
- NF X21-053*NF ISO 14707:2006 Surface chemical analysis - Glow discharge optical emission spectrometry (GD-OES) - Introduction to use
- NF C15-150-2/A1*NF EN 50107-1/A1:2004 Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV - Part 1 : general requirements
- NF EN 120005:1992 Spécification particulière cadre : photodiodes, réseaux de photodiodes (Non destinées aux applications pour les fibres optiques}
- NF C93-120-005*NF EN 120005:1992 Blank detail specification : photodiodes, photodiode arrays (not intended for fibre optic applications)
- NF C32-500*NF EN 50143:2009 Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 000 V but not exceeding 10 000 V
- NF EN 50143:2009 Câbles pour installations d'enseignes et de tubes à décharges lumineuses fonctionnant avec une tension à vide supérieure à 1 000 V mais ne dépassant pas 10 000 V
- NF EN 62718:2017 Applications ferroviaires - Matériel roulant - Ballasts électroniques à courant continu pour lampes fluorescentes d'éclairage
Korean Agency for Technology and Standards (KATS), Glow discharge is applied to
- KS D ISO 14707:2003 Surface chemical analysis-Glow discharge optical emission spectrometry (GD-OES)-Introduction to use
- KS B 5639-1999 Cinematography－Photographic sound test films, 35mm and 16mm－Specifications
- KS C IEC 61643-312:2016 COMPONENTS FOR LOW–VOLTAGE SURGE PROTECTIVE DEVICES – Part 312: Selection and application principles for gas discharge tubes
Japanese Industrial Standards Committee (JISC), Glow discharge is applied to
- JIS K 0144:2001 Surface chemical analysis -- Glow discharge optical emission spectrometry (GD-OES) -- Introduction to use
- JIS K 0144:2018 Surface chemical analysis -- Glow discharge optical emission spectrometry (GD-OES) -- Introduction to use
- JIS K 0150:2009 Surface chemical analysis -- Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
German Institute for Standardization, Glow discharge is applied to
- DIN ISO 14707:2018 Surface chemical analysis - Glow discharge optical emission spectrometry (GD-OES) - Introduction to use (ISO 14707:2015)
- DIN ISO 14707:2023-05 Surface chemical analysis - Glow discharge optical emission spectrometry (GD-OES) - Introduction to use (ISO 14707:2021)
- DIN ISO 14707:2023 Surface chemical analysis - Glow discharge optical emission spectrometry (GD-OES) - Introduction to use (ISO 14707:2021)
- DIN EN 120005:1996-11 Blank detail specification - Photodiodes, photodiode-arrays (not intended for fibre optic applications); German version EN 120005:1992
- DIN EN 62007-2:2009-09 Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods (IEC 62007-2:2009); German version EN 62007-2:2009 / Note: DIN EN 62007-2 (2001-06) remains valid alongside this standard until 2012-02-01.
International Organization for Standardization (ISO), Glow discharge is applied to
- ISO/TS 15338:2009 Surface chemical analysis - Glow discharge mass spectrometry (GD-MS) - Introduction to use
- ISO 16962:2017 Surface chemical analysis - Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
- ISO/TS 25138:2010 Surface chemical analysis - Analysis of metal oxide films by glow-discharge optical-emission spectrometry
- ISO 16962:2005 Surface chemical analysis - Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
- ISO 24417:2022 Surface chemical analysis — Analysis of metallic nanolayers on iron based substrates by glow-discharge optical-emission spectrometry
- ISO 11505:2012 Surface chemical analysis - General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry
- ISO 28057:2019 Clinical dosimetry — Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Glow discharge is applied to
- GB/T 32997-2016 Surface chemical analysis—General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry
American Society for Testing and Materials (ASTM), Glow discharge is applied to
- ASTM F1593-97 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
- ASTM F1593-97(2002) Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
- ASTM F1593-08 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
- ASTM F1710-08 Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
- ASTM E2994-21 Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)
- ASTM E2994-16 Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)
- ASTM F1593-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
- ASTM F1710-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
- ASTM F2405-04(2011) Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
- ASTM F2405-04 Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
- ASTM F1845-97 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Reduction Glow Discharge Mass Spectrometer
- ASTM F1845-97(2002) Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Reduction Glow Discharge Mass Spectrometer
- ASTM F1845-08 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Resolution Glow Discharge Mass Spectrometer
- ASTM D6105-04(2019) Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding
- ASTM F1845-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Resolution Glow Discharge Mass Spectrometer
ES-UNE, Glow discharge is applied to
- UNE-EN 120006:1992 BDS: PIN-PHOTODIODES FOR FIBRE OPTIC APPLICATIONS. (Endorsed by AENOR in September of 1996.)
- UNE-EN 120005:1992 BDS: PHOTODIODES, PHOTODIODE ARRAYS (NOT INTENDED FOR FIBRE OPTIC APPLICATIONS). (Endorsed by AENOR in September of 1996.)
- UNE-EN 61049:1995 ERRATUM CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS. PERFORMANCE REQUIREMENTS.
- UNE-EN 62007-2:2009 Semiconductor optoelectronic devices for fibre optic system applications -- Part 2: Measuring methods (Endorsed by AENOR in June of 2009.)
International Telecommunication Union (ITU), Glow discharge is applied to
American National Standards Institute （ANSI), Glow discharge is applied to
- ANSI/TIA/EIA 455-129-1996 Procedure for Applying Human Body Model Electrostatic Discharge Stress to Packaged Optoelectronic Components
TH-TISI, Glow discharge is applied to
- TIS 191-1988(en) CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Glow discharge is applied to
- GB/T 32651-2016 Test method for measuring trace elements in photovoltaic-grade silicon by high-mass resolution glow discharge mass spectrometry
SE-SIS, Glow discharge is applied to
- SIS SS CECC 20005-1988 Blank detail specification: Photodiodes, photodiode-arrays (not intended for fibre optic aoolications)
(U.S.) Telecommunications Industries Association , Glow discharge is applied to
- TIA-455-129-1996(2014) Procedures for Applying Human Body Model Electrostatic Discharge Stress to Package Optoelectronic Components
- TIA-455-129-1996 Procedures for Applying Human Body Model Electrostatic Discharge Stress to Package Optoelectronic Components
- TIA TSB-130-2003 Generic Guidelines for Connectorized Polarization Maintaining Fiber and Polarizing Fiber Cable Assemblies for Use in Telecommunications Applications
Lithuanian Standards Office , Glow discharge is applied to
- LST EN 120005-2001 Blank detail specification. Photodiodes, photodiode-arrays (not intended for fibre optic applications)
ETSI - European Telecommunications Standards Institute, Glow discharge is applied to
- I-ETS 300 644-1997 Transmission and Multiplexing (TM); Optical Fibre Cables for Indoor Applications
- PRI-ETS 300 644-1997 Transmission and Multiplexing (TM); Optical Fibre Cables for Indoor Applications
- PRI-ETS 300 644-1996 Transmission and Multiplexing (TM); Optical Fibre Cables for Indoor Applications
- PRI-ETS 300 229-1992 Transmission and Multiplexing (TM); Single-Mode Optical Fibre Cables to be Used for Aerial Application
- I-ETS 300 229-1993 Transmission and Multiplexing (TM); Single-Mode Optical Fibre Cables to Be Used for Aerial Application
- PRI-ETS 300 229-1993 Transmission and Multiplexing (TM); Single-Mode Optical Fibre Cables to Be Used for Aerial Application
Danish Standards Foundation, Glow discharge is applied to
- DS/EN 61049:1996 Capacitors for use in tubular fluorescent and other discharge lamp circuits - Performance requirements
- DS/EN 62007-2:2009 Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods
AENOR, Glow discharge is applied to
- UNE-EN 61049:1995 CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS. PERFORMANCE REQUIREMENTS.
未注明发布机构, Glow discharge is applied to
- BS EN ISO 11149:1997 Optics and optical instruments — Lasersandlaserrelated equipment — Fibre optic connectors for non - telecommunication laser applications
- DIN EN ISO 11149:1997 Optics and optical instruments – Lasers and laser-related equipment – Fiber optic connectors for non-telecommunication laser application
TIA - Telecommunications Industry Association, Glow discharge is applied to
- TSB-130-2003 Generic Guidelines for Connectorized Polarization Maintaining Fiber and Polarizing Fiber Cable Assemblies for Use in Telecommunications Applications
KR-KS, Glow discharge is applied to
- KS C IEC 61643-312-2016 COMPONENTS FOR LOW–VOLTAGE SURGE PROTECTIVE DEVICES – Part 312: Selection and application principles for gas discharge tubes
CENELEC - European Committee for Electrotechnical Standardization, Glow discharge is applied to
- EN 187101:1995 Family Specification: Optical Telecommunication Cables to Be Used in Ducts or Direct Buried Application
International Electrotechnical Commission (IEC), Glow discharge is applied to
- IEC 62007-2:2009 Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods
- IEC 61048:2006 Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements
AT-ON, Glow discharge is applied to
- ONORM S 5233-1987 Dosimeters for use in radiotherapy with ionization Chambers forX-rays, y -rays and electron beams
Institute of Electrical and Electronics Engineers (IEEE), Glow discharge is applied to
IN-BIS, Glow discharge is applied to
ZA-SANS, Glow discharge is applied to
- SANS 20099:2002 Uniform provisions concerning the approval of gas-discharge light sources for use in approved gas-discharge lamp units of power-driven vehicles
National Electrical Manufacturers Association（NEMA), Glow discharge is applied to
- NEMA C78.374-2015 Electric Lamps - Light-Emitting Diode Package Specification Sheet for General Illumination Applications