ZH
RU
ES

Standard mesh micron

Standard mesh micron, Total:97 items.

In the international standard classification, Standard mesh micron involves: Products of the chemical industry, Optical equipment, Linear and angular measurements, Integrated circuits. Microelectronics, Particle size analysis. Sieving, Air quality, Aerospace electric equipment and systems, On-board equipment and instruments, Fuels, Microbiology, Materials for aerospace construction, Road engineering, Document imaging applications, Water quality, Measurement of volume, mass, density, viscosity, Protection against fire, Analytical chemistry.

Korean Agency for Technology and Standards (KATS), Standard mesh micron

KS M ISO 8220:2003 Aluminium oxide primarily used for the production of aluminium-Determination of the fine particle size distribution (less than 60 ㎛)-Method using electroformed sieves

AASHTO - American Association of State Highway and Transportation Officials, Standard mesh micron

T128-1997 Standard Specification for Fineness of Hydraulic Cement by the 150-Micrometer (No. 100) and 75-Micrometer (No. 200) Sieves (Nineteenth Edition; ASTM C184-94)
T128-1992 Standard Specification for Fineness of Hydraulic Cement by the No. 100 (150-Micrometer) and 200 (75-Micrometer) Sieves (Eighteenth Edition; ASTM C184-94)
T 192-2011 Standard Method of Test for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
T 192-1993 Standard Method of Test for Fineness of Hydraulic Cement by the 45-Micrometer (No. 325) Sieve (ASTM C430-92)
T 192-1996 Standard Specification for Fineness of Hydraulic Cement by the 45-Micrometer (No. 325) Sieve (Eighteenth Edition; ASTM C430-94)
T 192-1997 Standard Specification for Fineness of Hydraulic Cement by the 45-Micrometer (No. 325) Sieve (Nineteenth Edition; ASTM C430-95)
T 128-1997 Standard Method of Test for Fineness of Hydraulic Cement by the 150-um (No. 100) and 75-um (No. 200) Sieves (HM-22; Part IIA; ASTM Designation: C 184-94)
T 11-2005 Standard Method of Test for Materials Finer Than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
T11-1991 Standard Method of Test for Materials Finer Than 75-Micrometer (No. 200) Sieve in Mineral Aggregates by Washing (Eighteenth Edition; ASTM C117-90)
T 11-1997 Standard Method of Test for Materials Finer Than 75-um (No. 200) Sieve in Mineral Aggregates by Washing (HM-22; Part IIA; ASTM Designation C 117-95)

The American Road & Transportation Builders Association, Standard mesh micron

AASHTO T 192-2011 Standard Method of Test for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
AASHTO T 128-1997 Standard Method of Test for Fineness of Hydraulic Cement by the 150-um (No. 100) and 75-um (No. 200) Sieves HM-22; Part IIA; ASTM Designation: C 184-94 R(2001)

International Organization for Standardization (ISO), Standard mesh micron

ISO 8220:1986 Aluminium oxide primarily used for the production of aluminium; Determination of the fine particle size distribution (less than 60 mu/m); Method using electroformed sieves

American Society for Testing and Materials (ASTM), Standard mesh micron

ASTM E210-63(1999)e1 Standard Specification for Microscope Objective Thread
ASTM E323-80(1996)e1 Standard Specification for Perforated-Plate Sieves for Testing Purposes
ASTM E276-03 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials
ASTM E389-93(1998) Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials
ASTM D7706-17 Standard Practice for Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers
ASTM D7706-17(2023) Standard Practice for Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers
ASTM B490-09(2021) Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
ASTM D2961-01a Standard Test Method for Single-Stage Total Moisture Less than 15% in Coal Reduced to 2.36-mm (No. 8 Sieve)Topsize
ASTM D2961-01 Standard Test Method for Single-Stage Total Moisture Less than 15% in Coal Reduced to 2.36-mm (No. 8 Sieve)Topsize
ASTM D2961-95a Standard Test Method for Single-Stage Total Moisture Less than 15% in Coal Reduced to 2.36-mm (No. 8 Sieve)Topsize
ASTM D2961-02 Standard Test Method for Single-Stage Total Moisture Less than 15% in Coal Reduced to 2.36-mm (No. 8 Sieve)Topsize
ASTM D2961-02e1 Standard Test Method for Single-Stage Total Moisture Less than 15% in Coal Reduced to 2.36-mm (No. 8 Sieve) Topsize
ASTM D2961-02(2007) Standard Test Method for Single-Stage Total Moisture Less than 15% in Coal Reduced to 2.36-mm (No. 8 Sieve) Topsize
ASTM D3863-87(2003) Standard Test Method for Retention Characteristics of 0.40 to 0.45-181m Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
ASTM E2859-11(2017) Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy
ASTM E285-08(2015) Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
ASTM E670-09(2015) Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter
ASTM D2961/D2961M-17 Standard Test Method for Single-Stage Total Moisture Less than 15 % in Coal Reduced to 2.36-mm (No. 8 Sieve) Topsize
ASTM E2859-11(2023) Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy
ASTM D7634-10 Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy
ASTM D6889-03(2017) Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)
ASTM D6161-10 Standard Terminology Used for Microfiltration, Ultrafiltration, Nanofiltration and Reverse Osmosis Membrane Processes
ASTM D6889-03 Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)
ASTM D6889-03(2011) Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)
ASTM E2102-11 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM F1226-89(1994)e1 Standard Test Method for Calibration of Liquid-Borne Particle Counters for Submicrometer Particle Sizing (Withdrawn 2002)
ASTM D3862-80(2001) Standard Test Method for Retention Characteristics of 0.2-181m Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
ASTM D3862-13 Standard Test Method for Retention Characteristics of 0.2-181m Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
ASTM D4176-04(2019) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D4176-21a Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D4176-20 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D6986-03 Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
ASTM D8070-19 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
ASTM D8070-21 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
ASTM D8070-19a Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
ASTM D8070-20 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
ASTM D8070-16 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
ASTM E276-98 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials
ASTM E2722-09 Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity in Fabric and Air Filter Media
ASTM D8070-23 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
ASTM E2530-06 Standard Practice for Calibrating the Z-Magnification of an Atomic Force Microscope at Subnanometer Displacement Levels Using Si(111) Monatomic Steps

Military Standard of the People's Republic of China-General Armament Department, Standard mesh micron

GJB 6182-2007 The radiation measuring methods of targets on microwave or millimeter wave in near field
GJB 6182A-2021 Target and its environment near-field microwave; millimeter wave radiation characteristics test method

国家市场监督管理总局、中国国家标准化管理委员会, Standard mesh micron

GB/T 39516-2020 Micro nano standard samples（geometric）

Association for Information and Image Management (AIIM), Standard mesh micron

AIIM MS24-1996 Standard Test Target for Use in Microfilming Source Document Engineering Graphics on 35 mm Microfilm

Institute of Electrical and Electronics Engineers (IEEE), Standard mesh micron

IEEE 695-1990 Microprocessor universal format for object modules
IEEE Std 695-1985 IEEE Trial Use Standard for Microprocessor Universal Format for Object Modules
IEEE Std 1301.3-1992 IEEE Standard for a Metric Equipment Practice for Microcomputers - Convection-Cooled with 2.5 mm Connectors
IEEE Std 1301.1-1991 IEEE Standard for a Metric Equipment Practice for Microcomputers - Convection-Cooled With 2 Mm Connectors

National Metrological Technical Specifications of the People's Republic of China, Standard mesh micron

JJF 2060-2023 Production of Sub-micron and Nanometer Particle Size Reference Materials

U.S. Military Regulations and Norms, Standard mesh micron

ARMY MIL-STD-651 NOTICE 3-2013 VISUAL INSPECTION STANDARDS FOR 20MM AMMUNITION AND COMPONENTS

Professional Standard - Post and Telecommunication, Standard mesh micron

YD XXX7-1995 Construction Standards for Microwave Relay Communication Projects

Association Francaise de Normalisation, Standard mesh micron

NF EN ISO 13969:2004 Lait et produits laitiers - Lignes directrices pour une description normalisée des méthodes microbiologiques de dépistage d'inhibiteurs microbiens
NF L52-410-301*NF EN 4641-301:2022 Aerospace series - Cables, optical 125 μm diameter cladding - Part 301 : tight structure 50/125 μm GI, fibre nominal 1,8 mm, outside diameter - Product standard
NF L52-410-100*NF EN 4641-100:2015 Aerospace series - Cables, optical 125 micrometer diameter cladding - Part 100 : tight structure 62,5/125 micrometer core GI fibre 1,8 mm outside diameter - Product standard
NF EN 4641-100:2015 Série aérospatiale - Câble, optique, diamètre extérieur de la gaine optique 125 micromètre - Partie 100 : câble à structure serrée fibre à gradient d'indice cœur 62,5/125 micromètre, diamètre extérieur 1,8 mm - Norme de produit
NF EN 4641-200:2018 Série aérospatiale - Câbles, optiques, diamètre extérieur de la gaine optique 125 micromètres - Partie 200 : câble à structure semi-libre, fibre à gradient d'indice 9/125 micromètres, diamètre extérieur 0,9 mm - Norme de produit
NF EN 4641-102:2009 Série aérospatiale - Câble, optique, diamètre extérieur de la gaine optique 125 µm - Partie 102 : câble à structure semi libre, fibre à gradient d'indice 62,5/125 µm, diamètre extérieur 1,8 mm - Norme de produit

Danish Standards Foundation, Standard mesh micron

DS/EN 4641-102:2009 Aerospace series - Cables, optical 125 µm outside diameter cladding - Part 102: Semi-loose 62,5/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard
DS/EN 4641-103:2010 Aerospace series - Cables, optical 125 µm diameter cladding - Part 103: Semi-loose, ruggedized simplex construction 62,5/125 µm GI fibre nominal 2,74 mm, outside diameter - Product standard
DS/EN 4641-104:2010 Aerospace series - Cables, optical 125 µm diameter cladding - Part 104: Semi-loose, ruggedized duplex construction 62,5/125 µm GI fibre nominal, 4,95 mm outside diameter - Product standard
DS/EN 4641-105:2010 Aerospace series - Cables, optical 125 µm diameter cladding - Part 105: Semi-loose, ruggedized quadraxial construction 62,5/125 µm GI fibre nominal, 5,72 mm outside diameter - Product standard
DS/CEN/CR 14252:2001 Co-ordination on microbiological Standards - Register of work items of common interest

AT-ON, Standard mesh micron

OENORM EN 4641-301-2020 Aerospace series - Cables, optical 125 µm diameter cladding - Part 301: Tight structure 50/125 µm GI, fibre nominal 1,8 mm, outside diameter - Product standard

German Institute for Standardization, Standard mesh micron

DIN EN 4641-301:2022-09 Aerospace series - Cables, optical 125 ?m diameter cladding - Part 301: Tight structure 50/125 ?m GI, fibre nominal 1,8 mm, outside diameter - Product standard; English version prEN 4641-301:2022 / Note: Date of issue 2022-08-19*Intended as replacement...
DIN EN 4641-301:2022-08 Aerospace series - Cables, optical 125 ?m diameter cladding - Part 301: Tight structure 50/125 ?m GI, fibre nominal 1,8 mm, outside diameter - Product standard; German and English version EN 4641-301:2022 / Note: To be replaced by DIN EN 4641-301 (2022...
DIN EN 4641-102:2023 Aerospace series - Cables, optical 125 ?m outside diameter cladding - Part 102: Semi-loose 62,5/125 ？m GI fibre nominal 1,8 mm outside diameter - Product standard; English version prEN 4641-102:2023
DIN EN 4641-301:2023-09 Aerospace series - Cables, optical 125 ?m diameter cladding - Part 301: Tight structure 50/125 ?m GI, fibre nominal 1,8 mm, outside diameter - Product standard; German version ASD-STAN prEN 4641-301:2023 / Note: Date of issue 2023-08-18*Intended as rep...

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Standard mesh micron

IEEE 695-1985 Trial-Use Standard for Microprocessor Universal Format for Object Modules (IEEE Computer Society)

European Committee for Standardization (CEN), Standard mesh micron

EN 4641-101:2015 Aerospace series - Cables@ optical 125 �� diameter cladding - Part 101: Tight structure 62@5 �� core GI fibre 0@9 mm outside diameter - Product standard

Aerospace, Security and Defence Industries Association of Europe (ASD), Standard mesh micron

ASD-STAN PREN 4641-101-2013 Aerospace series Cables, optical 125 μm diameter cladding Part 101: Tight structure 62,5 μm core GI fibre 0,9 mm outside diameter Product standard (Edition P 1)

(U.S.) Ford Automotive Standards, Standard mesh micron

FORD SK-M99J9587-D-2006 PRIMER, STONE CHIP PROTECTION, 50 MICROMETER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESH-M9H99-A2-1991 SCREEN, NYLON, MONOFILAMENT, 350 MICROMETRE MESH OPENING (Shown on ESH-M9H99-A1)
FORD ESH-M9H99-A3-1991 SCREEN, NYLON, MONOFILAMENT, 355 MICROMETRE MESH OPENING (Shown on ESH-M9H99-A1)
FORD ESH-M9H99-A4-1991 SCREEN, NYLON, MONOFILAMENT, 132 MICROMETRE MESH OPENING (Shown on ESH-M9H99-A1)
FORD SK-M99J9587-E-2006 PRIMER, STONE CHIP PROTECTION, 50 MICROMETER, LOW BAKE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M64J28-A2-2003 MAKEUP FEED, WATERBORNE CATIONIC ELECTROCOAT, 20 MICROMETRE FILM BUILD, RESIN ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on WSB-M64J28-A1
FORD WSB-M64J28-C2-2003 MAKEUP FEED, WATERBORNE CATIONIC ELECTROCOAT, 20 MICROMETRE FILM BUILD, RESIN ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on WSB-M64J28-A1

British Standards Institution (BSI), Standard mesh micron

BS EN 4641-105:2010 Aerospace series. Cables, optical 125 $Gmm diameter cladding. Semi-loose, ruggedized quadraxial construction 62,5/125 $Gmm GI fibre nominal, 5,72 mm outside diameter. Product standard

RU-GOST R, Standard mesh micron

GOST 13.1.114-1990 Reprography. Micrography. Microfishes of catalogues. General requirements and norms

Professional Standard - Agriculture, Standard mesh micron

850兽药典一部-2015 Appendix Contents 1100 Biological Inspection Method 1107 Microbiological Limit Standards for Non-sterile Veterinary Drugs
815兽药典二部-2015 Appendix Contents 1100 Biological Inspection Method 1104 Microbiological Limit Standards for Non-sterile Veterinary Drugs

European Association of Aerospace Industries, Standard mesh micron

AECMA PREN 4641-104-2010 Aerospace series Cables, optical 125 mue m diameter cladding Part 104: Semi-loose, ruggedized duplex construction 62,5/125 mue m GI fibre nominal, 4,95 mm outside diameter Product standard Edition P 1