ZH
RU
ES

/department

/department, Total:138 items.

In the international standard classification, /department involves: Company organization and management, Quality, Medical sciences and health care facilities in general, Nuclear energy engineering, Microbiology, Packaging and distribution of goods in general, Radiation measurements, Equipment for petroleum and natural gas industries, Radiocommunications, Acoustics and acoustic measurements, Measurement of fluid flow, Laboratory medicine, Protection against crime, Elements of buildings, Shafts and couplings, Road vehicle systems, Metrology and measurement in general, Mining and quarrying, Applications of information technology, Geology. Meteorology. Hydrology, Air quality, Non-textile floor coverings, Construction materials, Postal services, Linear and angular measurements, Road engineering, Pipeline components and pipelines.

FI-SFS, /department

AT-ON, /department

OENORM EN 9101-2021 Requirements for Conducting Audits of Aviation, Space, and Defence Quality Management Systems

European Committee for Standardization (CEN), /department

prEN 9101-2021 Requirements for Conducting Audits of Aviation, Space, and Defence Quality Management Systems
PD CR 12340-1996 Packaging - Recommendations for conducting life-cycle inventory analysis of packaging systems
EN ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013)

Society of Automotive Engineers (SAE), /department

SAE AS9101G-2022 Requirements for Conducting Audits of Aviation, Space, and Defense Quality Management Systems
SAE J1628-1998 Technician Procedure for Using Electronic Refrigerant Leak Detectors for Service of Mobile Air-Conditioning Systems
SAE J1937-1995 ENGINE TESTING WITH LOW-TEMPERATURE CHARGE AIR-COOLER SYSTEMS IN A DYNAMOMETER TEST CELL
SAE ARP219-1992 PROCEDURE AND METHOD FOR CONDUCTING TEST OF HYDRAULIC COMPONENTS IN CONTAMINATION CONTROLLED SYSTEM

Korean Agency for Technology and Standards (KATS), /department

KS A GUIDE 62-2008 General requirements for bodies operating assessments and certification/registrartion of quality systems
KS A ISO/ASTM 51956-2012(2017) Practice for use of thermoluminescence dosimetry (TLD) systems for radiation processing
KS M ISO 2714-2003(2008) Liquid hydrocarbons－Volumetric measurement by displacement meter systems other than dispensing pumps
KS X ISO/IEC 14754-2011(2021) Information technology－Pen-Based Interfaces－Common gestures for Text Editing with Pen-Based Systems
KS X ISO/IEC 14754-2011(2017) Information technology－Pen-Based Interfaces－Common gestures for Text Editing with Pen-Based Systems

Association Francaise de Normalisation, /department

NF X50-072:1998 General requirements for bodies operating assessment and certification/registration of quality systems.
NF V08-100:1987 MICROBIOLOGY OF FOOD PRODUCTS. PLATING OUT AND ENUMERATION OF MICROORGANISMS BY SPIRAL PLATE TECHNIQUE.
FD H60-003*FD CR 12340:1996 Packaging. Recommendations for conducting life-cycle inventory analysis of packaging systems.
NF ISO 50003:2021 Systèmes de management de l'énergie - Exigences pour les organismes procédant à l'audit et à la certification de systèmes de management de l'énergie
XP CEN ISO/TS 23406:2022 Secteur nucléaire - Exigences pour les organismes procédant à l'audit et à la certification des systèmes de management de la qualité d'organisations fournissant des produits et services importants pour la sûreté nucléaire (IPSN)
NF L09-551:2020 Série aérospatiale - Composition de la référence des flux utilisés lors de l'exécution de brasures tendres
NF Z17-007:2004 Postal services - Quality of service - Measurement of loss of registered mail and other types of postal service using a track and trace system.

Standard Association of Australia （SAA）, /department

AS/NZS 3842:1998 Guide 62: General requirements for bodies operating assessment and certification/registration of quality systems

US-FCR, /department

FCR COE ETL 1110-1-176-1996 BIOREMEDIATION USING LANDFARMING SYSTEMS
FCR COE ETN 80-4-1980 PROGRAMMING ENERGY MONITORING AND CONTROL SYSTEMS FUNDED THROUGH THE MCA PROGRAM, PROCEDURES FOR
FCR NE-F-3-41T-1981 IN-PLACE TESTING OF HEPA FILTER SYSTEMS BY THE SINGLE-PARTICLE, PARTICLE-SIZE SPECTROMETER METHOD

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications, /department

CEPT T/CS 42-05-1985 Essais De Signalisation Pour Le Systeme De Signalisation R2 Via ECS

German Institute for Standardization, /department

DIN EN 9101:2023-04 Aerospace series - Quality Management Systems - Requirements for conducting audits of aviation, space, and defence quality management systems; German version ASD-STAN prEN 9101:2022 / Note: Date of issue 2023-03-10*Intended as replacement for DIN EN 91...
DIN 896:1987 Tee handled socket wrenches; double end; test torques series A
DIN EN ISO 29601:2011-07 Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011); German version EN ISO 29601:2011

IET - Institution of Engineering and Technology, /department

PROG IND CNTRL SYS USG IEC 1131-3:1998 Programming Industrial Control Systems Using IEC 1131-3
MDL CNTRL SYS IEC 61499:2001 Modelling Control Systems Using IEC 61499. Applying function blocks to distributed systems

International Telecommunication Union (ITU), /department

ITU-R TF.767-2 FRENCH-2001 Use of global navigation satellite systems for high-accuracy time transfer
ITU-R TF.767-2 SPANISH-2001 Use of global navigation satellite systems for high-accuracy time transfer
ITU-T R.73-1988 MAINTENANCE MEASUREMENTS TO BE CARRIED OUT ON VFT SYSTEMS
ITU-T R.116-1989 Maintenance Tests to Be Carried out on International TDM Systems - Telegraph Transmission (Study Group IX) 5 pp
ITU-T R.73-1989 Maintenance Measurements to Be Carried out on the Channels of International VFT Systems - Telegraph Transmission (Study Group IX) 2 pp
ITU-T R.116-1988 MAINTENANCE TESTS TO BE CARRIED OUT ON INTERNATIONAL TDM SYSTEMS
ITU-R RS.1859 FRENCH-2010 Use of remote sensing systems for data collection to be used in the event of natural disasters and similar emergencies
ITU-R RS.1859 SPANISH-2010 Use of remote sensing systems for data collection to be used in the event of natural disasters and similar emergencies
ITU-T R.73 FRENCH-1988 MAINTENANCE MEASUREMENTS TO BE CARRIED OUT ON VFT SYSTEMS
ITU-T R.73 SPANISH-1988 MAINTENANCE MEASUREMENTS TO BE CARRIED OUT ON VFT SYSTEMS
ITU-R VOEU 96 FRENCH-1997
ITU-R S.1001-2010 Use of systems in the fixed-satellite service in the event of natural disasters and similar emergencies for warning and relief operations
ITU-R RUEGO 96 SPANISH-1997

ES-UNE, /department

UNE 165019:2018 Management systems for criminal compliance. Requirements for bodies providing audit and certification of management systems of criminal compliance in accordance with UNE Standard 19601.

Danish Standards Foundation, /department

DS 2451-4:2001 Infection control in the health care sector - Part 4: Requirements for surveillance and investigation of outbreaks performed by a Department of Clinical Microbiology
DS/CEN/CR 12340:1996 Packaging - Recommendations for conducting life-cycle inventory analysis of packaging systems
DS/ISO/IEC 14754:2000 Information Techonology - Pen-based Interfaces - Common gestures for Text Editing with Pen-Based Systems

SSPC - The Society for Protective Coatings, /department

PA 4-1991 Guide to Maintenance Repainting with Oil Base or Alkyd Painting Systems
PA GUIDE 4-1982 Guide to Maintenance Repainting with Oil Base or Alkyd Painting Systems (Editorial Changes September 1@2000)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., /department

ASHRAE 4347-2000 Thermoeconomic Analysis of a CHP System by Iterative Numerical Techniques
ASHRAE AT-96-21-4-1996 Optimizing System Control with Load Prediction by Neural Networks for an Ice-Storage System
ASHRAE OR-16-C010-2016 Energy Performance Assessment of Radiant Cooling System through Modeling and Calibration at Component Level
ASHRAE LO-09-067-2009 Field Measurements of Innovative Indoor Shading Systems in a Full-Scale Office Testbed
ASHRAE OR-16-C073-2016 Condensation Resistance Evaluation of a Double-Sliding Window System in Accordance with the Korean Design Standard for Preventing Condensation in Apartment Buildings
ASHRAE AT-96-3-1-1996 Condition Monitoring in HVAC Subsystems Using First Principles Models

ANSI - American National Standards Institute, /department

X4.10-1975 MINIMUM REQUIREMENTS FOR REMOTE DICTATION THROUGH AN INTERCOMMUNICATION SWITCHING SYSTEM

British Standards Institution (BSI), /department

BS ISO 7753:2023 Nuclear criticality safety. Use of criticality accident alarm systems for operations
PD 6607:1996 Packaging. Recommendations for conducting life-cycle inventory analysis of packaging systems
22/30427890 DC BS ISO 7753. Nuclear criticality safety. Use of criticality accident alarm systems for operations
13/30281229 DC BS ISO 51956. Practice for use of thermoluminescence dosimetry (TLD) systems for radiation processing
BS ISO 2715:2017 Liquid hydrocarbons. Volumetric measurement by turbine flowmeter - Volumetric measurement by turbine meter systems
BS EN 14137:2003 Postal services - Quality of service - Measurement of loss of registered mail and other types of postal service using a track and trace system
BS DD CEN/TS 13036-2:2010 Road and airfield surface characteristics - Test methods - Assessment of the skid resistance of a road pavement surface by the use of dynamic measuring systems
12/30251709 DC BS ISO/ASTM 51631. Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations

AENOR, /department

UNE-CR 12340:1998 PACKAGING. RECOMMENDATIONS FOR CONDUCTING LIFE-CYCLE INVENTORY ANALYSIS OF PACKAGING SYSTEMS.

ESDU - Engineering Sciences Data Unit, /department

SPD-M14-1-2010 Sept.10: Thermodynamic modelling of asphaltene-oil systems using SAFT
SPD-M6-1-2010 Apr.08: Thermodynamic modelling of asphaltene-oil systems using SAFT
SPD-M10-1-2010 Apr.09: Thermodynamic modelling of asphaltene-oil systems using SAFT
ESDU 89032-1989 Parameter estimation of linear systems in the presence of process noise using the Maximum Likelihood method.

Institute of Electrical and Electronics Engineers (IEEE), /department

IEEE P3002.2/D7, September 2017 IEEE Draft Recommended Practice for Conducting Load-Flow Studies of Industrial and Commercial Power Systems
P3002.2/D6, October 2015 IEEE Draft Recommended Practice for Conducting Load-Flow Studies of Industrial and Commercial Power Systems
ANSI/IEEE Std 400-1980 IEEE Guide for Making High-Direct-Voltage Tests on Power Cable Systems in the Field
IEEE 3002.8-2018 IEEE Recommended Practice for Conducting Harmonic Studies and Analysis of Industrial and Commercial Power Systems
IEEE 3002.3-2018 IEEE Recommended Practice for Conducting Short-Circuit Studies and Analysis of Industrial and Commercial Power Systems
IEEE Std 3002.3-2018 IEEE Recommended Practice for Conducting Short-Circuit Studies and Analysis of Industrial and Commercial Power Systems
IEEE Std 3002.8-2018 IEEE Recommended Practice for Conducting Harmonic Studies and Analysis of Industrial and Commercial Power Systems
IEEE 3002.2-2018 IEEE Recommended Practice for Conducting Load-Flow Studies and Analysis of Industrial and Commercial Power Systems
IEEE Std 3002.2-2018 IEEE Recommended Practice for Conducting Load-Flow Studies and Analysis of Industrial and Commercial Power Systems
P1627/D1, June 2017 IEEE Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of Surge Arrestors
IEEE P3002.3/D7, December 2017 IEEE Approved Draft Recommended Practice for Conducting Short-Circuit Studies and Analysis of Industrial and Commercial Power Systems
IEEE 1627-2019 IEEE Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
IEEE P3006.5/D2, July 2014 IEEE Draft Recommended Practice for the Use of Probability Methods for Conducting a Reliability Analysis of Industrial and Commercial Power Systems
IEEE P1627/D6, February 2019 IEEE Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
IEEE P1627/D4, April 2018 IEEE Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
IEEE P1627/D5, October 2018 IEEE Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
IEEE P1627/D2, November 2017 IEEE Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
IEEE 1627 IEEE Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of Surge Arrestors

CZ-CSN, /department

CSN 40 4011-1989 Aetivity measurement of radionuclides with liquid-scintillation counting systems.

American Gear Manufacturers Association, /department

AGMA 93FTM5-1993 Optimal Gear Design for Equal Strength Teeth Using Addendum Modification Coefficients
AGMA 12FTM08-2012 Combined Marine Propulsion Systems: Optimization and Validation by Simulation

API - American Petroleum Institute, /department

API MPMS 21.2 ADD-2000 Manual of Petroleum Measurement Standards Chapter 21-Flow Measurement Using Electronic Metering Systems Addendum to Section 2-Flow Measurement Using Electronic Metering Systems@ Inferred Mass (First Edition)

AASHTO - American Association of State Highway and Transportation Officials, /department

R 54-2010 Accepting Pavement Ride Quality When Measured Unsing Inertial Profiling Systems (Revision 1)

American Society for Testing and Materials (ASTM), /department

ASTM D5389-93(1997) Standard Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems
ASTM E1503-12 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
ASTM E1503-97(2004) Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Analysis System
ASTM D5389-93(2019) Standard Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems
ASTM E1503-14 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
ASTM D538-85(1997) Standard test method for open channel flow measurement by sonic anemometer systems
ASTM E1503-22 Standard Test Method for Conducting Outdoor Sound Measurements Using a Statistical Sound Analysis System
ASTM F2781-10 Standard Practice for Testing Forced Entry, Ballistic and Low Impact Resistance of Security Fence Systems
ASTM E2140-01(2017) Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head
ASTM F658-00 Standard Practice for Calibration of a Liquid-Borne Particle Counter Using an Optical System Based Upon Light Extinction
ASTM E648-14c Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
ASTM E648-15e1 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
ASTM D7954/D7954M-14 Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Non-Destructive Electrical Impedance Scanners
ASTM D7954/D7954M-15 Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Non-Destructive Electrical Impedance Scanners
ASTM C1493-19 Standard Test Method for Non-Destructive Assay of Nuclear Material in Waste by Passive and Active Neutron Counting Using a Differential Die-Away System
ASTM F2164-10e1 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
ASTM E1592-05(2017) Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference

NATO - North Atlantic Treaty Organization, /department

ANP-4-2007 THE NATO GUIDELINE FOR MEMBER STATE CERTIFICATION OF IFR NAVIGATION SYSTEMS USING GPS PPS (ED 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707

ECIA - Electronic Components Industry Association, /department

EIA-448-19A-2000 Test Standard for Electromechanical Components - Environmental Effects of Machine Soldering Using a Vapor Phase System
EIA-448-21A-2000 Test Standard for Electromechanical Components - Environmental Effects of Machine Soldering Using an Infrared System
EIA-448-21-1989 Method 21 Test Standard for Electromechanical Switches: Environmental Effects of Machine Soldering Using an Infrared System

ETSI - European Telecommunications Standards Institute, /department

ES 202 642-2010 Human Factors (HF); Personalization of eHealth systems by using eHealth user profiles (eHealth) (V1.1.1)

GOSTR, /department

GOST R 58939-2020 System of ensuring geometrical parameters accuracy in construction. Rules of taking measurements. Prefabricated elements

GB-REG, /department

REG NASA-LLIS-1801--2004 Lessons Learned ?Human Factors Engineering; Acceptance, Implementation, and Verification as a System

Association of German Mechanical Engineers, /department

VDI 2240-1971 Shaft couplings; systematic classification according to their properties
VDI 3785 Blatt 2-2011 Environmental meteorology - Methods of urban and site-related ground-based climate measurements with mobile measurement systems

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., /department

IEEE P1627/D1-2017 Draft Standard for Transient Overvoltage Protection of DC Electrification System by Application of Lightning Arresters
IEEE P1627/D6-2019 Draft Standard for Transient Overvoltage Protection of DC Electrification System by Application of Surge Arresters
IEEE P3002.7/D13-2018 Draft Recommended Practice for Conducting Motor-Starting Studies and Analysis of Industrial and Commercial Power Systems
IEEE P1627/D2-2017 Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
IEEE P1627/D4-2018 Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
IEEE P1627/D5-2018 Draft Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters

AGMA - American Gear Manufacturers Association, /department

12FTM08-2012 Combined Marine Propulsion Systems: Optimization and Validation by Simulation

SAE - SAE International, /department

SAE J1937-1989 ENGINE TESTING WITH LOW TEMPERATURE CHARGE AIR COOLER SYSTEMS IN A DYNAMOMETER TEST CELL
SAE J1937-2002 Engine Testing with Low-Temperature Charge Air-Cooler Systems in a Dynamometer Test Cell@ Recommended Practice
SAE J1937-2011 Engine Testing with Low-Temperature Charge Air-cooler Systems in a Dynamometer Test Cell
SAE ARP219-1961 Conducting Test of Hydraulic Components in Contamination Controlled System@ Procedure and Method for
SAE ARP219A-2013 Procedure and Method for Conducting Test of Hydraulic Components in Contamination Controlled System

未注明发布机构, /department

BS ISO 15568:1998(2000) Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations

Indonesia Standards, /department

SNI 13-6595-2001 Separation of minerals by heavy liquid batch systems for mineralogy analysis

GM Europe, /department

GME L-1B1201-2010 Linearity Test at Passenger Vehicle Heating and A/CSystems on Heater Test Bench and in the Climatic Wind Tunnel

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, /department

ITU-R S.1001-1-2006 Use of systems in the fixed-satellite service in the event of natural disasters and similar emergencies for warning and relief operations
ITU-R S.1001-2-2010 Use of systems in the fixed-satellite service in the event of natural disasters and similar emergencies for warning and relief operations
OPINION 96-1997 Future Use of the Global Navigation Satellite Ssytem (GNSS) for High-Precision Time Transfer