ZH
RU
ES

Retention machine

Retention machine, Total:457 items.

In the international standard classification, Retention machine involves: Products of the textile industry, Electricity. Magnetism. Electrical and magnetic measurements, Fuels, Inks. Printing inks, Aircraft and space vehicles in general, Electromechanical components for electronic and telecommunications equipment, Packaging and distribution of goods in general, Quality, Agricultural machines, implements and equipment, Footwear, Electrical accessories, Soil quality. Pedology, Machine tool systems, Road vehicle systems, Vocabularies, Road vehicles in general, Bearings, Pipeline components and pipelines, Lifting equipment, Surface treatment and coating, Construction materials, Earthworks. Excavations. Foundation construction. Underground works, Cereals, pulses and derived products, Test conditions and procedures in general, Components and accessories for telecommunications equipment, Electromagnetic compatibility (EMC), Leather technology, Electrical wires and cables, Cutting tools, Fibre optic communications, Bottles. Pots. Jars, Telecontrol. Telemetering, Hand-held tools, Tyres, Medical equipment, Chipless working equipment, Wind turbine systems and other alternative sources of energy, Protection of and in buildings, Structures of buildings, Packaging materials and accessories, Fertilizers, Aerospace fluid systems and components, Integrated circuits. Microelectronics, Rubber and plastics products, Ceramics, Company organization and management, Nuclear energy engineering, Aids for disabled or handicapped persons, Hydraulic energy engineering, Adhesives, Heat recovery. Thermal insulation, Transport, Applications of information technology, Integrated Services Digital Network (ISDN), Services, Railway engineering in general, Fasteners, Vibration and shock with respect to human beings, Sports equipment and facilities, Aerospace electric equipment and systems, Internal combustion engines, Ground service and maintenance equipment, Education, Continuous handling equipment, Power stations in general, Non-ferrous metals, Gas and steam turbines. Steam engines, Installations in buildings, Farming and forestry, Power transmission and distribution networks, Construction industry, Noise with respect to human beings, Acoustics and acoustic measurements.

German Institute for Standardization, Retention machine

DIN EN 60512-15-3:2009 Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional) (IEC 60512-15-3:2008); German version EN 60512-15-3:2008
DIN EN ISO 19957:2004 Footwear - Test methods for heels - Heel pin holding strength (ISO 19957:2004); German version EN ISO 19957:2004
DIN EN ISO 19958:2004 Footwear - Test methods for heels and top pieces - Top piece retention strength (ISO 19958:2004); German version EN ISO 19958:2004
DIN 5405-2:1993 Rolling bearings; needle roller bearings; thrust needle roller and cage assemblies
DIN 58356-2:2000 Membrane filter elements - Part 2: Pressure holder tests
DIN 5405-2:2019 Rolling bearings - Needle roller bearings - Part 2: Thrust needle roller and cage assemblies
DIN 5405-2:2019-04 Rolling bearings - Needle roller bearings - Part 2: Thrust needle roller and cage assemblies
DIN EN 61580-8:1997-05 Methods of measurement for waveguides - Part 8: Waveguide power holding capability (IEC 61580-8:1996); German version EN 61580-8:1996
DIN 33459:2021 Requirements for the assessment, maintenance and improvement of competences of learning facilitators - Requirements for persons
DIN 15094:1982-07 Cranes; driving wheel units and idler wheel units; bearing cage rings
DIN EN 60512-16-5:2009-03 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) (IEC 60512-16-5:2008); German version EN 60512-16-5:2008 / Note: DIN IEC 6051...
DIN EN 4057-406:2008-09 Aerospace series - Cable ties for harnesses - Test methods - Part 406: Locking device retention; German and English version EN 4057-406:2006
DIN 5412-1:2005-08 Rolling bearings - Cylindrical roller bearings - Part 1: Single row with cage, separate thrust collars
DIN 65576:1991-08 Aerospace; quick-release pins in corrosion-resisting steel, single locked, with self-retaining cam lever release mechanism
DIN EN 60512-16-9:2009-03 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force (IEC 60512-16-9:2008); German version EN 60512-16-9:2008 / Note: DIN IEC 60512-8 ...
DIN EN 4057-406:2008 Aerospace series - Cable ties for harnesses - Test methods - Part 406: Locking device retention; German and English version EN 4057-406:2006
DIN EN 60512-16-5:2009 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) (IEC 60512-16-5:2008); German version EN 60512-16-5:2008
DIN EN 12312-20:2009-08 Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units; German version EN 12312-20:2005+A1:2009 / Note: DIN EN 12312-20 (2005-12) remains valid alongside this standard until 2009-12-28.
DIN ETS 300818:2000 Broadband Integrated Services Digital Network (B-ISDN) - Asynchronous Transfer Mode (ATM) - Retainability performance for B-ISDN switched connections (Endorsement of the English version ETS 300818:1998 as German standard)
DIN 4750:1993 Requirements for vertical pipes for steam rooms in steamboilers and heating plants guarding against steampressure of 0,5 bar
DIN ETS 300140:1992-12 Integrated Services Digital Network (ISDN); Call Hold (HOLD) supplementary service; functional capabilities and information flows; english version ETS 300140:1992
DIN 7817-1:1990-06 Rims for motor vehicles and trailers; rims with flange J, JK and K without bead retaining contour
DIN EN 6059-407:2019-09 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 407: Mark adherence and print permanence; German and English version EN 6059-407:2019
DIN EN 2591-409:1999-06 Aerospace series -Elements of electrical and optical connection; test methods - Part 409: Contact retention in insert; German version EN 2591-409:1999 / Note: Applies in conjunction with DIN EN 2591 (1992-12).
DIN EN ISO 10517:2010 Powered hand-held hedge trimmers - Safety (ISO 10517:2009); German version EN ISO 10517:2009

Korean Agency for Technology and Standards (KATS), Retention machine

KS K 0559-2011 Test method for pile retention of woven and knitted fabrics
KS K 0559-2022 Test method for pile retention of woven and knitted fabrics
KS E 3711-1996(2021) Hardcoa1-Determination of moisture-holdingcapacity
KS K 0559-2017 Test method for pile retention of woven and knitted fabrics
KS M ISO 20867:2020 Footwear — Test methods for insoles — Heel pin holding strength
KS B ISO 296-2013(2018) Machine tools－Self-holding tapers for tool shanks
KS R ISO 8855-2014(2019) Road vehicles — Vehicle dynamics and road-holding ability — Vocabulary
KS K 0609-2015 Test method for pile abrasive retention of corduroy fabrics
KS K 0609-2008 Test method for pile abrasive retention of corduroy fabrics
KS M ISO 19958:2005 Footwear－Test methods for heels and top pieces－Top piece retention strength
KS L 2402-2015(2020) Testing methods for the fragment retention of carbonated beverage bottles
KS B 7912-2003 Bumper for power tiller
KS M ISO 19958-2005(2020) Footwear－Test methods for heels and top pieces－Top piece retention strength
KS C IEC 61580-8-2014(2019) Methods of measurement for waveguides — Part 8: Waveguide power holding capability
KS F ISO 9087-2004(2014) Determination of nail and screw holding power under axial load application for wood
KS X 6006-5-2020 Korean machine readable cataloging(KORMARC) format —Part 5: Holdings data
KS R ISO 4548-12:2022 Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 12: Filtration efficiency using particle counting, and contaminant retention capacity
KS B ISO 11806-1-2017(2022) Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers — Part 1: Machines fitted with an integral combustion engine

Group Standards of the People's Republic of China, Retention machine

T/ZZB 0830-2018 Electric latching relay
T/ZZB 1015-2019 Hand-held hedgerow trimmer powered by gasoline engine
T/ZZB 0416-2018 Garden equipment - Hand-held blower/vacuums powered by gasoline engine
T/CNFMA B021-2022 Outdoor forestry machinery Hand-held tree digging machines powered by gasoline engines
T/CNFMAB 021-2022 Outdoor forestry machinery Hand-held tree digging machines powered by gasoline engines
T/CIE 134-2022 Test method for data retention time of magnetic random access memory chip
T/CIE 133-2022 Test method for data retention time of magnetic random access memory device
T/CNFMA B008-2019 Landscaping machinery Hand-held hedge trimmers powered by gasoline engines
T/CNFMA B010-2020 Outdoor forestry machinery Hand-held chainsaws powered by four-stroke gasoline engines
T/ZZB 2133-2021 Garden machinery—Hand-held hedge trimmers with lithium-ion battery as power source
T/GDAHVAC 2-2021 Qualification level of central air conditioning maintenance institutions
T/ZZB 2969-2022 Hand-held rotary tapping machine with lithium-ion battery as power source
T/CNFMA B025-2023
T/HNNTXH 01-2022 Qualification level of central air conditioning maintenance institutions
T/CNFMA B009-2020 Economic forest fruit production machinery Hand-held rotary cutting rubber harvester powered by lithium-ion battery
T/ZS 0238-2021 Specification for the professional competence of nursery institution employees (nursery teacher)
T/CNFMA B020-2022 One-handed chainsaw powered by lithium-ion battery for outdoor forestry machinery
T/CNFMA B023-2022 Landscaping Machinery Handheld Pole Reciprocating Saw Powered by Li-ion Batteries
T/SZUAVIA 001-2017 General Requirements for Battery Power Single-Shaft Farm Corp Protection UAV Systems
T/CCIAT 0056-2023 Technical standards for protective dismantling of wind turbines of 3MW and below
T/CNFMA B030-2023

中国石油化工总公司, Retention machine

SH/T 0334-1992 Grease retention capacity determination method

RO-ASRO, Retention machine

STAS 12066-1982 I Iolders for machine tools RETAINER WITH TAPER SHANK 7 :24 Dimensions
STAS 12180-1983 Machine retaining devices ORIENTATION PILOTS Dimensions
STAS 12688-1989 Machine-tools PALLETS WITH WORKING SURFACE WIDTH UP TO 800 mm FOR PRISMATIC PARTS HOLDING Dimensions

HU-MSZT, Retention machine

American Society for Testing and Materials (ASTM), Retention machine

ASTM D7244-06 Standard Test Method for Relative Cure of Energy-Cured Inks and Coatings
ASTM D4335-99(2006) Standard Test Method for Determination of Component Retention of a Mechanical Pump Dispenser
ASTM D4335-99 Standard Test Method for the Determination of the Component Retention of a Mechanical Pump Dispenser
ASTM D4335-99(2010) Standard Test Method for Determination of Component Retention of a Mechanical Pump Dispenser
ASTM D4334-18 Standard Practice for Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
ASTM D4334-99 Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
ASTM D4334-05 Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
ASTM D7786-13(2019) Standard Test Method for Determining Enamel Holdout
ASTM C1124-90(2004) Standard Test Method for Kerosene Retention of Asbestos
ASTM D4436-08 Standard Test Method for Rock Bolt Long-Term Load Retention Test
ASTM D4436-04 Standard Test Method for Rock Bolt Long-Term Load Retention Test
ASTM D4436-84(1998) Standard Test Method for Rock Bolt Long-Term Load Retention Test
ASTM D5193/D5193M-93(2002) Standard Test Method for Coated Fabrics-Air Retention
ASTM D5193/D5193M-93(2022) Standard Test Method for Coated Fabrics—Air Retention
ASTM D4436-13 Standard Test Method for Rock Bolt Long-Term Load Retention Test
ASTM D4436-13e1 Standard Test Method for Rock Bolt Long-Term Load Retention Test
ASTM E1521-19 Standard Test Method for Liquid Holding Capacity of Granular Carriers
ASTM D5459-95 Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
ASTM D5459-95(2001) Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
ASTM D5459-95(2020) Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
ASTM D6864-10 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products
ASTM D6864-11 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products
ASTM D4335-18 Standard Practice for Determination of Component Retention of a Mechanical Pump Dispenser
ASTM D6140-22 Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications
ASTM C1134-90(2007) Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
ASTM F2241-13 Standard Specification for Continued Airworthiness System for Powered Parachute Aircraft
ASTM D5459-95(2007) Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
ASTM D2980-17e1 Standard Test Method for Saturated Density, Moisture-Holding Capacity, and Porosity of Saturated Peat Materials
ASTM D5459-95(2012) Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
ASTM A990/A990M-20 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure-Retaining Parts for Corrosive Service
ASTM E2829-11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Maneuvering Tasks: Sustained Speed

Military Standards (MIL-STD), Retention machine

DOD A-A-53907-1989 APPLICATOR SET, PIN RETENTION, DENTAL, SPIRAL, CEMENT

PL-PKN, Retention machine

PN P04800-1972 Testing of textiles Determination of water retention power
PN H11082-1991 Pattern materials for the lost wax process.Measurement of the mechanical properties
PN H11084-1991 Pattern materials for the lost wax process. Measurement of ability of the shape conservation
PN E85203-32-1991 Gauges for lampholders of the electric light sources. Gauge "C" for checking minimum retentiontion force in lampholder GR8
PN E85203-35-1991 Gauges for lampholders of electric light sources Gauge ?C" for checking of on minimum retention force in lampholder G23
PN E85203-41-1991 Gauges for lampholders of the electric light sources Gauge for minimum cóntact retention force in lampholder Gi9,5
PN E08400-09-1989 Hand-hcld motor-operated electric tools Tropical endurance Requirements and tests

AENOR, Retention machine

UNE 32003:1995 COAL. DETERMINATION OF MOISTURE HOLDING CAPACITY.
UNE 18174:1983 NEEDLE ROLLER BEARINGS.- THRUST NEEDLE ROLLER AND CAGE ASSEMBLIES, THRUST WASHERS.- DIMENSIONS AND TOLERANCES.
UNE-EN 50308:2005 Wind turbines - Protective measures - Requirements for design, operation and maintenance
UNE-EN 12312-14:2015 Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles
UNE-EN 2591-413:1999 AEROSPACE SERIES. ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION. TEST METHODS. PART 413: HOLDING FORCE OF GROUNDING SPRING SYSTEM.

CENELEC - European Committee for Electrotechnical Standardization, Retention machine

EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)
CLC/TS 60034-31-2011 Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guide (Remains Current)

Danish Standards Foundation, Retention machine

DS/EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)
DS/ETS 300 140:1993 Integrated Services Digital Network (ISDN) - Call Hold (HOLD) supplementary service - Functional capabilities and information flows
DS/ETS 300140:1993 Integrated Services Digital Network (ISDN). Call Hold (HOLD) supplementary service. Functional capabilities and information folws
DS/EN 60512-16-9:2008 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force
DS/EN 12312-20+A1:2009 Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units
DS/EN 50308:2005 Wind turbines - Protective measures - Requirements for design, operation and maintenance
DS/EN 12312-14+A1:2009 Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles
DS/EN 15811/AC:2010 Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool
DS/EN 15811:2009 Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool
DS/EN 2591-413:1999 Aerospace series - Elements of electrical and optical connection - Test methods - Part 413: Holding force of grounding spring system
DS/EN ISO 11806-2:2012 Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with back-pack power unit

American Nuclear Society (ANS), Retention machine

ANS 3.8.4-1995 Criteria for Maintaining Radiological Emergency Response Capability

ANS - American Nuclear Society, Retention machine

3.8.4-1995 Criteria for Maintaining Radiological Emergency Response Capability

Society of Automotive Engineers (SAE), Retention machine

SAE TS321-1-1985 TS321 Test for Electrical Connectors Insert Retention
SAE TS365-1-1987 TS365 Test for Electrical Connectors Holding Force of Grounding Spring System
SAE AIR4083A-2023 Helicopter Power Assurance
SAE USCAR35-1-2020 TEST PROCEDURES FOR EVALUATING BOLT-LOAD RETENTION OF MAGNESIUM ALLOYS
SAE ARP5542A-2012 Hand Held Aircraft Tire Inflation Pressure Gauges
SAE ARP5542-2009 Hand Held Aircraft Tire Inflation Pressure Gauges
SAE ARP5542A-2022 Hand Held Aircraft Tire Inflation Pressure Gauges
SAE ARP6028A-2020 Configuration Control for Maintaining Correlation of Gas Turbine Engine Test Cells
SAE ARINC413A-1989 GUIDANCE FOR AIRCRAFT ELECTRICAL POWER UTILIZATION AND TRANSIENT PROTECTION
SAE ARP5718A-2012 Process to Obtain Holdover Times for Aircraft Deicing/Anti-Icing Fluids, SAE AMS 1428 Type II,III and IV

Hebei Provincial Standard of the People's Republic of China, Retention machine

DB13/T 5410-2021 The technical ability of the personnel of special equipment inspection and testing institutions shall be maintained

GM Global, Retention machine

GMW 15530-2012 Installation and Removal/Retention Load for Snap-In Fasteners Press-In and Retaining Force Issue 2; English

IT-UNI, Retention machine

UNI ISO 8334:2021 Forestry machinery -- Portable chain-saws -- Determination of balance and maximum holding moment

ES-AENOR, Retention machine

UNE 74-151-1992 Acoustics. Pure tone air conduction threshold audiometry for hearing conservation purposes
UNE 68-001-1988
UNE 68-001-1990

IN-BIS, Retention machine

American National Standards Institute （ANSI), Retention machine

ANSI/EIA 364-29C:2006 Electric Connectors - Contact Retention Test Procedure
ANSI/EIA 364-97:1997 Housing Panel Retention Test Procedure for Electrical Connectors
ANSI/ASME B30.28-2010 Safety Standard for Balance - Lifting Units
ANSI/EIA 364-19A:2001 Torsional Insert Retention Test Procedure for Electrical Connectors
ANSI/SCTE 102-2010 Cable Retention Force Testing of Trunk & Distribution Connectors
ANSI/TIA-455-186-1991 Proposed New FOTP, Gauge Retention Force Measurement for the Fiber Optic Components
ANSI B175.2-2000 Power Tools – Hand-Held and Backpack, Gasoline-Engine-Powered Blowers
ANSI/EIA 364-99:1999 Gage Location and Retention Test Procedure for Electrical Connectors
ANSI/TIA/EIA 455-186-1991 Proposed New FOTP, Gauge Retention Force Measurement for the Fiber Optic Components
ANSI/ASTM D6864:2011 Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products
ANSI B175.3-2013 Outdoor Power Equipment �C Internal Combustion Engine�CPowered Hand-Held Grass Trimmers and Brushcutters �C Safety and Environmental Requirements (OPEI)
ANSI/EIA/TIA 455-186:1991 Proposed New FOTP, Gauge Retention Force Measurement for the Fiber Optic Components
ANSI B175.4-2013 For Outdoor Power Equipment �C Portable@ Handheld@ Internal-Combustion-Engine-Driven Cut-Off Machines �C Safety Requirements (OPEI)
ANSI/OPEI B71.8-1996 Outdoor Power Equipment – Walk-Behind Powered Rotary Tillers and Hand Supported Cultivators – Safety Specifications
ANSI/OPEI B175.3-2013 Outdoor Power Equipment – Internal Combustion Engine–Powered Hand-Held Grass Trimmers and Brushcutters – Safety and Environmental Requirements
ANSI/OPEI B175.4-2013 For Outdoor Power Equipment – Portable, Handheld, Internal-Combustion-Engine-Driven Cut-Off Machines – Safety Requirements
ANSI/OPEI B175.1-2012 Outdoor Power Equipment - Internal Combustion Engine-Powered Hand-Held Chain Saws - Safety and Environmental Requirements
ANSI/OPEI B175.1-2021 Outdoor Power Equipment - Internal Combustion Engine-Powered Hand-Held Chain Saws - Safety and Environmental Requirements
ANSI/ASTM F1815:2011 Test Methods for Saturated Hydraulic Conductivity, Water Retention, Porosity, and Bulk Density of Athletic Field Rootzones

KR-KS, Retention machine

KS M ISO 20867-2020 Footwear — Test methods for insoles — Heel pin holding strength
KS R ISO 4548-12-2022 Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 12: Filtration efficiency using particle counting, and contaminant retention capacity

Inner Mongolia Provincial Standard of the People's Republic of China, Retention machine

DB15/T 1085-2016 Cultivated land fertility maintenance and improvement technical specifications
DB15/T 112-2022 Technical specifications for installation, use and maintenance of small household wind turbines

Fujian Provincial Standard of the People's Republic of China, Retention machine

DB35/T 1836-2019 Cultivated land fertility improvement and maintenance technical specifications

British Standards Institution (BSI), Retention machine

BS PD ISO/TR 22053:2021 Safety of machinery. Safeguarding supportive system
PD ISO/TR 22053:2021 Safety of machinery. Safeguarding supportive system
BS ISO 8855:2012 Road vehicles. Vehicle dynamics and road-holding ability Vocabulary
BS ISO 8855:2011 Road vehicles. Vehicle dynamics and road-holding ability. Vocabulary
BS 4882:1990 Specification for bolting for flanges and pressure containing purposes
BS EN 61580-8:1997 Methods of measurement for waveguides. Waveguide power holding capability
BS EN ISO 10517:2019 Powered hand-held hedge trimmers. Safety
BS EN ISO 19958:2004 Footwear - Test methods for heels and top pieces - Top piece retention strength
BS EN 61400-24:2010 Wind turbines. Lightning protection
BS EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Mechanical tests on contacts and terminations - Test 16e - Gauge retention force (resilient contacts)
BS ISO 14085-3:2015 Aerospace series. Hydraulic filter elements. Test methods. Filtration efficiency and retention capacity
BS EN 4057-406:2007 Aerospace series - Cable ties for harnesses - Test methods - Locking device retention
BS EN 4057-406:2006 Aerospace Series. Cable Ties for Harnesses. Test Methods. Part 406: Locking Device Retention
BS ISO 8334:2007 Forestry machinery - Portable chain-saws - Determination of balance and maximum holding moment
BS EN 792-8:2001+A1:2008 Hand-held non-electric power tools — Safety requirements — Part 8: Sanders and polishers
BS EN 6059-407:2019 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods - Mark adherence and print permanence
BS EN 61300-3-10:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Gauge retention force
BS EN IEC 60512-15-2:2018 Tracked Changes. Connectors for electrical and electronic equipment. Tests and measurements. Connector tests (mechanical). Test 15b: Insert retention in housing (axial)
BS EN 60512-15-8:1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Mechanical tests on contacts and terminations. Test 15h. Contact retention system resistance to tool application
BS EN 50260-2-14:2002 Safety of hand-held battery-powered motor-operated tools and battery packs - Particular requirements for routers and laminate trimmers
BS EN ISO 22868:2011 Forestry and garden machinery. Noise test code for portable hand-held machines with internal combustion engine. Engineering method (Grade 2 accuracy)
BS EN 792-1:2000+A1:2008 Hand-held non-electric power tools — Safety requirements — Part 1: Assembly power tools for non-threaded mechanical fasteners

VN-TCVN, Retention machine

TCVN 7559-2005 Road vehicles.Vehicle dynamics and road-holding ability.Vocabulary
TCVN 3121-8-2003 Mortar for masonry.Test methods.Part 6: Determination of consistency retentivity

TH-TISI, Retention machine

TIS 1665-1998 Road vehicles.vehicle dynamics and road-holding ability.vocabulary
TIS 1162-2005 Door latches and door retention components of motor vehicles

International Organization for Standardization (ISO), Retention machine

ISO 8855:2011 Road vehicles - Vehicle dynamics and road-holding ability - Vocabulary
ISO 8855:1991/Add 1:1992 Road vehicles - Vehicle dynamics and road-holding ability - Vocabulary - Addendum 1
ISO 19958:2004 Footwear - Test methods for heels and top pieces - Top piece retention strength
ISO 8855:1991 Road vehicles; vehicle dynamics and road-holding ability; vocabulary
ISO 3031:2000 Rolling bearings - Thrust needle roller and cage assemblies, thrust washers - Boundary dimensions and tolerances
ISO/CD 20342-8:2011 Assistive products for tissue integrity when lying down — Part 8: Pressure distribution
ISO/TR 11769:2010 Intelligent transport systems - Communications access for land mobiles (CALM) - Data retention for law enforcement
ISO 8334:2007 Forestry machinery - Portable chain-saws - Determination of balance and maximum holding moment
ISO 11806-2:2022 Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers — Part 2: Machines for use with backpack power unit
ISO 14085-3:2015 Aerospace series - Hydraulic filter elements - Test methods - Part 3: Filtration efficiency and retention capacity
ISO 5682-2:2017 Equipment for crop protection - Spraying equipment - Part 2: Test methods to assess the horizontal transverse distribution for hydraulic sprayers
ISO 3031:2021 Rolling bearings — Thrust needle roller and cage assemblies, thrust washers — Boundary dimensions, geometrical product specifications (GPS) and tolerance values

Professional Standard - Machinery, Retention machine

JB/T 7915-1995 Needle rooler bearings.Thrust needle roller and cage assemblies,thrust washers
JB/T 8211-1996 Rolling bearing thrust cylindrical roller cage assembly and thrust washer
JB/T 8211-2005 Rolling bearings.Thrust cylindrical roller and cage assemblies, thrust washers
JB/T 8211-2023 Rolling bearings — Thrust cylindrical roller and cage assemblies, thrust washers

Military Standard of the People's Republic of China-General Armament Department, Retention machine

GJB 8373-2015 Specification for elliptical stress applying part polarization-maintaining fiber
GJB 8776-2015 Technical requirements for dynamic balancing of aircraft engine main shaft bearing cages
GJB 3220-1998 General requirements for power sources of aircraft ground support equipment

(U.S.) Telecommunications Industries Association , Retention machine

TIA-455-186-1991 FOTP-186 Gauge Retention Force Measurement for Fiber Optic Components
TIA-455-187-1991 FOTP-187 Engagement and Separation Force Measurement of Fiber Optic Connector Sets

ABMA - American Bearing Manufacturers Association, Retention machine

21.1-1988 Thrust Needle Roller and Cage Assemblies and Thrust Washers Metric Design
21.2-1988 Thrust Needle Roller and Cage Assemblies and Thrust Washers Inch Design

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Retention machine

GB/T 4605-2003 Rolling bearings--Thrust needle roller and cage assemblies,thrust washers
GB/T 42607-2023 Powered Handheld Hedge Trimmer Safety
GB 5093-1985 Technical requirements for hand-held electromagnetic disk used for the presses
GB 5093-2009 Technical requirements for hand-held electromagetic disk used for the presses
GB/T 17680.9-2003 Criteria for emergency planning and preparedness of nuclear power plants maintenance of on-site emergency response capacity
GB/T 17680.5-1999 Criteria for emergency planning and preparedness for nuclear power plants. Maintenance of off-site emergency response capacity
GB 4584-2007 Specification of active poto-electronec protective devices for presses
GB/T 17680.5-2008 Criteria for emergency planning and preparedness for nuclear power plants.Part 5:Maintenance of offsite emergency response capabilities
GB/T 18520-2001 Equipment for crop protection--Sprayers--Connecting dimensions for nozzles and manometers
GB/T 32800.3-2016 Hand-held non-electric power tools—Safety requirements—Part 3: Drills and tappers
GB/T 20183.2-2006 Equipment for crop protection.Spraying equipment.Part 2: Test methods for hydraulic sprayers
GB/T 32800.11-2023 Safety requirements for hand-held non-electric power tools Part 11: Punches and scissors
GB/T 8910.4-2008 Hand-held portable power tools.Measurement of vibrations at the handle.Part 4:Grinders
GB/T 5395-2014 Forestry and gardening machinery.Vibration test code for portable hand-held machines with internal combustion engine.Vibration at the handles
GB/T 8910.2-2004 Hand-held portable power tools-Measurement of vibrations at the handle Part-2:Chipping hammers and riveting hammers
GB 10395.13-1996 Tractors and machinery for agriculture and forestry--Technical means for ensuring safety--Part 13: Powered walk-behind and hand-held lawn trimmers and lawn edge trimmers
GB 10395.13-2006 Tractors and machinery for agriculture and forestry.Technical means for ensuring safety.Part 13:Powered walk-behind and hand-held lawn trimmers and lawn edge trimmers

US-AACC, Retention machine

AATCC 88c-2006 Retention of Creases in Fabrics after Repeated Home Laundering

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Retention machine

GB/T 35866-2018 Inspection of grain and oils－Determination of solvent retention capacity of wheat flour
GB/T 5093-2009 Technical requirements for hand-held electromagnetic disk used for the presses
GB/T 33629-2017 Wind turbine generator systems—Lightning protection
GB/T 4584-2007 Specification of active opto-electronic protective devices for presses
GB/T 26548.6-2018 Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 6:Rammers

ESDU - Engineering Sciences Data Unit, Retention machine

ESDU 14001-2012 Applying@ measuring and maintaining pretension in steel bolts

Electronic Components, Assemblies and Materials Association, Retention machine

EIA_ECA-364-29C-2006 TP-29C Contact Retention Test Procedure for Electrical Connectors
EIA_ECA-364-35B-1998 TP-35B Insert Rentention Test Procedure for Electrical Connectors
ECA EIA-364-29C-2006 TP-29C Contact Retention Test Procedure for Electrical Connectors

ECIA - Electronic Components Industry Association, Retention machine

364-35A-1983 TP-35A Insert Retention Test Procedure for Electrical Connectors
364-29A-1983 TP-29A Contact Retention Test Procedure for Electrical Connectors
EIA/ECA-364-29C-2006 TP-29C Contact Retention Test Procedure for Electrical Connectors
EIA/ECA-364-35B-1998 TP-35B Insert Rentention Test Procedure for Electrical Connectors
EIA-364-29C-2006 TP-29C Contact Retention Test Procedure for Electrical Connectors
EIA-364-97-1997 TP-97 Housing Panel Retention Test Procedure for Electrical Connectors
EIA-364-99-1999 TP-99 Gage Location and Retention Test Procedure for Electrical Connectors
EIA-364-35B-1998 TP-35B Insert Rentention Test Procedure for Electrical Connectors (Revision of EIA-364-35A)
EIA-364-29B-1998 TP-29B Contact Retention Test Procedure for Electrical Connectors (FSC 5935; Should Be Used Instead of MIL-STD-1344@ Method 2007.1)

European Committee for Standardization (CEN), Retention machine

EN ISO 19957:2021 Footwear - Test methods for heels - Heel pin holding strength (ISO 19957:2021)
prEN 412-1992 Protective aprons for use with hand knives
EN 13087-4:2000 Protective Helmets - Test Methods - Part 4: Retention System Effectiveness
EN ISO 19957:2004 Footwear - Test methods for heels - Heel pin holding strength
EN ISO 19958:2004 Footwear - Test methods for heels and top pieces - Top piece retention strength
EN 68:1977/A1:1978 AMD 1 Hand Held (Portable) Power Driven Grinding Machines: Mechanical Safety
EN 68/2:1978 AMD 2 Hand Held (Portable) Power Driven Grinding Machines: Mechanical Safety
EN 4057-406:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 406: Locking device retention
EN 2591-426:2001 Aerospace series - Elements of electrical and optical connection; Test methods - Part 426: Contact retention system effectiveness
prEN ISO 11680 rev Machinery for forestry - Manually portable (hand-held) powered lawn and garden equipment and forest machinery - Safety requirements and testing for pole-mounted powered pruners
EN ISO 10651-6:2009 Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 6: Home-care ventilatory support devices

Association Francaise de Normalisation, Retention machine

NF G62-121*NF EN ISO 19958:2004 Footwear - Test methods for heels and top pieces - Top piece retention strength
NF EN ISO 19958:2004 Chaussures - Méthodes d'essai relatives aux talons et aux bonbouts - Force de rétention du bonbout
NF EN 60512-17-3:2011 Connecteurs pour équipements électroniques - Essais et mesures - Partie 17-3 : essais de maintien des câbles - Essai 17c : résistance de la pince de maintien des câbles au tirage
NF C93-593-8*NF EN 61580-8:2002 Methods of measurement for waveguides - Part 8 : waveguide power holding capability
NF L48-121:1948 Aircraft fluid installations. Tank equipment. Filters and retaining rings.
NF EN 60512-17-4:2011 Connecteurs pour équipements électroniques - Essais et mesures - Partie 17-4 : essais de maintien des câbles - Essais 17d : résistance de la pince de maintien du câble à la torsion des câbles
NF C93-400-15-1*NF EN 60512-15-1:2008 Connectors for electronic equipment - Tests and measurements - Part 15-1 : connector tests (mechanical) - Test 15a : contact retention in insert
NF EN 4057-406:2007 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 406 : rétention du système de verrouillage
NF F01-510:1990 Railway rolling stock. Environnement conditions sustained or produced by devices or organs in vehicles.
NF ISO 6533:2022 Machines forestières - Protecteur de la main tenant la poignée avant des scies à chaîne portatives - Dimensions et dégagements
NF P85-517:1998 Building construction. Sealants. Determination of adhesion/cohesion properties at maintained extension after immersion in water.
NF P85-518:1998 Building construction. Sealants. Determination of adhesion/cohesion properties after immersion in water.
NF EN ISO 10590:2005 Construction immobilière - Mastics - Détermination des propriétés de déformation des mastics sous traction maintenue après immersion dans l'eau
NF EN 60512-15-3:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 15-3 : essais (mécaniques) des connecteurs - Essai 15c : rétention de l'isolant dans le boîtier (torsion)
NF EN 60512-15-1:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 15-1 : essais (mécaniques) des connecteurs - Essai 15a : rétention des contacts dans l'isolant
NF L52-252-406*NF EN 4057-406:2007 Aerospace series - Cable ties for harnesses - Test methods - Part 406 : locking device retention
NF EN IEC 60512-15-2:2018 Connecteurs pour équipements électriques et électroniques - Essais et mesures - Partie 15-2 : essais (mécaniques) des connecteurs - Essai 15b : rétention de l'isolant dans le boîtier (axial)
NF EN 60512-16-5:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-5 : essais mécaniques des contacts et des sorties - Essai 16e : force de rétention du calibre (contacts élastiques)
NF E62-333:1992 Machine tools. Modular units. Modular clamping and mounting device for piece. Position holding components.
NF C93-400-15-2:2008 Connectors for electronic equipment - Tests and measurements - Part 15-2 : connector tests (mechanical) - Test 15b : insert retention in housing (axial).
NF C93-400-16-5*NF EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5 : mechanical tests on contacts and terminations - Test 16e : gauge retention force (resilient contacts)
NF EN 60512-16-9:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-9 : essais mécaniques des contacts et des sorties - Essai 16i : force de maintien du ressort de contact de mise à la masse
NF ISO 3031:2021 Roulements - Cages à aiguilles axiales et rondelles de butée - Dimensions d'encombrement, spécification géométrique des produits (GPS) et valeurs de tolérance
NF E62-109-1*NF ISO 702-1:2009 Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1 : conical connection.
NF ISO 8380:1994 Matériel forestier - Débroussailleuses et coupe-herbe portatifs - Résistance mécanique du protecteur du dispositif de coupe.
NF C57-703*NF EN 50308:2004 Wind turbines - Protective measures - Requirements for design, operation and maintenance.
NF EN 2591-409:1999 Série aérospatiale - Organes de connexion électrique et optique. Méthodes d'essais - Partie 409 : rétention du contact dans l'isolant.
NF EN 6059-407:2019 Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 407 : adhérence de marquage et permanence de l'impression
NF U25-517-2*NF EN ISO 11806-2:2022 Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2 : machines for use with backpack power unit
NF E90-322-3:1997 Hand-held portable power tools. Measurement of vibrations at the handle. Part 9 : rammers.
CWA 15537:2006 Network Enabled Abilities - Service-Oriented Architecture for civilian and military crisis management
FD ISO/TR 10949:2003 Transmissions hydrauliques - Propreté des composants - Lignes directrices pour l'obtention et le maintien de la propreté des composants de leur fabrication jusqu'à leur installation
NF EN 2591-413:1998 Série aérospatiale - Organes de connexion électrique et optique. Méthodes d'essais - Partie 413 : force de maintien du système élastique de mise à la masse.
NF ISO 14242-3/A1:2019 Implants chirurgicaux - Usure des prothèses totales de l'articulation de la hanche - Partie 3 : paramètres de charge et de déplacement pour machines d'essai d'usure du type orbital de maintien et conditions environnementales correspondantes d'es...
NF C93-902-4:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-4 : tests. Fibre/cable retention.
NF EN 2591-410:1998 Série aérospatiale - Organes de connexion électrique et optique. Méthodes d'essais - Partie 410 : rétention axiale de l'isolant dans le boîtier.

Taiwan Provincial Standard of the People's Republic of China, Retention machine

CNS 8188-1982 3

Professional Standard - Chemical Industry, Retention machine

HG/T 2724.4-1995 Determination of Stress Retention by Rubber Thread Test Method

SAE - SAE International, Retention machine

SAE T-115-2004 Aircraft Maintenance THE ART AND SCIENCE OF KEEPING AIRCRAFT SAFE
SAE AIR4083-1989 Helicopter Power Assurance
SAE USCAR35-2007 Test Procedures for Evaluating Bolt-Load Retention of Magnesium Alloys
SAE ARP6028A-2015 Configuration Control for Maintaining Correlation of Gas Turbine Engine Test Cells

American Society of Mechanical Engineers (ASME), Retention machine

ASME B5.10-1972 Machine Tapers-Self Holding and Steep Taper Series
ASME B5.10-1994(R2013) Machine Tapers-Self Holding and Steep Taper Series
ASME NTB-5-2022 Guidance for Determination of Risk-Informed Safety Classification for Light Water Reactor Nuclear Facility Pressure Retaining Components

Jiangxi Provincial Standard of the People's Republic of China, Retention machine

DB36/T 1589-2022 Soil and Water Conservation UAV Monitoring Technical Regulations

工业和信息化部, Retention machine

JB/T 13828-2020 Mechanical spindle accuracy maintenance test specifications

CZ-CSN, Retention machine

CSN 50 0339-1989 Testing of filter papers. etermination of retentiveness of fil-ter páper to fine precipitates
CSN 26 0606-1994 Continuous mechanical handling equipment. Safety code for belt conveyors. Examples for protektion of pinch points on idlers
CSN ISO 5048:1994 Continuous mechanical handling equipment. Belt conveyors with carrying idlers. Calculation of operating power and tensile forces

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Retention machine

ASHRAE 3915-1995 PI Control of Fan Speed to Maintain Constant Discharge Pressure

United States Navy, Retention machine

NAVY MIL-T-17442 B NOTICE 1-1998 TENSIOMETER, DIAL INDICATING, HYDRAULIC, REMOTE READING AND MAINTENANCE KIT (MINESWEEPING)
NAVY MIL-T-17442 B (1)-1968 TENSIOMETER, DIAL INDICATING, HYDRAULIC, REMOTE READING AND MAINTENANCE KIT (MINESWEEPING)
NAVY MIL-T-17442 B-1964 TENSIOMETER, DIAL INDICATING, HYDRAULIC, REMOTE READING AND MAINTENANCE KIT (MINESWEEPING)

GM Europe, Retention machine

GME 4671-2001 Derating of Power Steering Support for Electromechanical Power Steering (EPS) (English/German)
GME4671-2001 R眉ckregelung der Lenkunterst眉tzung von Elektromechanischen Lenksystemen (EPS) Derating of Power Steering Support for Electromechanical Power Steering (EPS) English/German

GM North America, Retention machine

GM GM9918P-1997 High Temperature Bond Retention of Anti-Flutter Roof Bow Adhesive

(U.S.) Ford Automotive Standards, Retention machine

FORD FLTM BV 120-2-2000 ADHESIVE PERFORMANCE TEST - OVERLAP SHEAR HOLDING POWER OF ADHESIVE-COATED FELT
FORD FLTM BV 120-02-2000 ADHESIVE PERFORMANCE TEST - OVERLAP SHEAR HOLDING POWER OF ADHESIVE-COATED FELT

Professional Standard - Nuclear Industry, Retention machine

EJ/T 882-1994 Criteria for maintaining emergency response capabilities of nuclear power plant operating organizations

Professional Standard - Forestry, Retention machine

LY/T 3305-2022 Hand-held transplanting tree digging machine powered by gasoline engine
LY/T 2080-2012 Garden machinery. Hand-held lawn edge trimmers with a gasoline engine
LY/T 1619-2017 Garden machinery Hand-held hedge trimmers powered by gasoline engines
LY/T2080-2012 Garden machinery—Hand-held lawn edge trimmers with a gasoline engine
LY/T 2568.2-2017 Garden machinery—Gasoline engine powered hand-held blower vacuums—Part 2:Combined type
LY/T 2568.1-2015 Hand-held blowers powered by gasoline engines for garden machinery Part 1: Single-cylinder double-chamber type
LY/T 1346-2011 Forestry machinery.Portable chain-swas.Determination of balance and maximum holding moment

RU-GOST R, Retention machine

GOST 12408-1977 Multi-station cold headers presses. Dimensions of tool holding places
GOST 29288-1992 Fertilizers with high content of nitrogen. Ammonium nitrate. Method for determination of the ability to suppress the lubricant
GOST R 56112-2014 Integrated logistic support of exporting military products. General requirements for technical operating capabilities assurance programmes
GOST R 55619-2013 Renewable power engineering. Wind turbines. Protective measures. Requirements for design, operation and maintenance

ANSI - American National Standards Institute, Retention machine

B7.5-1990 Safety Code for the Construction@ Use@ and Care of Gasoline-Powered@ Hand-held@ Portable@ Abrasive Cutting-off Machines (OPEI)
B175.4-2018 Outdoor Power Equipment - Portable@ Handheld@ Internal Combustion Engine-Powered Cut-Off Machines - Safety and Environmental Requirements (OPEI)
B175.1-2012 Outdoor Power Equipment – Internal Combustion Engine-Powered Hand-Held Chain Saws – Safety and Environmental Requirements (OPEI)
B175.6-2018 Outdoor Power Equipment - Internal Combustion Engine-Powered Hand-Held Hedge Trimmers - Safety and Environmental Requirements (OPEI)
B175.3-2013 Outdoor Power Equipment – Internal Combustion Engine–Powered Hand-Held Grass Trimmers and Brushcutters – Safety and Environmental Requirements (OPEI)
B175.4-2006 For Outdoor Power Equipment – Portable@ Handheld@ Internal-Combustion-Engine-Driven Cut-Off Machines – Safety Requirements (OPEI)
B175.4-2013 For Outdoor Power Equipment – Portable@ Handheld@ Internal-Combustion-Engine-Driven Cut-Off Machines – Safety Requirements (OPEI)

GOSTR, Retention machine

GOST R 59255-2020 Brown coals, hard coals and anthracite. Accelerated method for the determination of moisture-holding capacity
GOST R 58804-2020 Motor vehicles. Lane-keeping assist systems. General technical requirements and test methods

ES-UNE, Retention machine

UNE-EN 61580-8:1996 METHODS OF MEASUREMENT FOR WAVEGUIDES. PART 8: WAVEGUIDE POWER HOLDING CAPABILITY. (Endorsed by AENOR in December of 1996.)
SAE ARP5758A-2023 Trend Analysis for Maintaining Correlation of Gas Turbine Engine Test Cells
UNE-EN 4057-406:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 406: Locking device retention (Endorsed by AENOR in April of 2007.)
UNE-ETS 300140 Ed1:2022 Integrated Services Digital Network (ISDN);Call Hold (HOLD) supplementary service;Functional capabilities and information flows (Endorsed by Asociación Española de Normalización in March of 2022.)
UNE-EN 60512-15-1:2008 Connectors for electronic equipment - Tests and measurements -- Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert (Endorsed by AENOR in December of 2008.)
UNE-EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements -- Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) (Endorsed by AENOR in February of 2009.)
UNE-EN 60512-16-9:2008 Connectors for electronic equipment- Tests and measurements- Part 16-9: Mechanical tests on contacts and terminations- Test 16i:Grounding contact spring holding force (Endorsed by AENOR in November of 2008.)
UNE-EN 60512-15-3:2008 Connectors for electronic equipment - Tests and measurements -- Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional) (Endorsed by AENOR in December of 2008.)
UNE-EN 60512-15-5:2008 Connectors for electronic equipment - Tests and measurements -- Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation (Endorsed by AENOR in December of 2008.)
UNE-EN 12312-20:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units (Endorsed by AENOR in June of 2009.)
UNE-EN IEC 60512-15-2:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) (Endorsed by Asociación Española de Normalización in May of 2018.)
UNE-EN ISO 11806-2:2022 Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with backpack power unit (ISO 11806-2:2022, Corrected version 2022-04)
UNE-EN 6059-407:2019 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 407: Mark adherence and print permanence (Endorsed by Asociación Española de Normalización in August of 2019.)

Japanese Industrial Standards Committee (JISC), Retention machine

JIS L 1075:1993 Testing methods for pile retention of woven and knitted fabrics
JIS L 1075:2000 Testing methods for pile retention of woven and knitted fabrics
JIS L 1075:2007 Testing methods for pile retention of woven and knitted fabrics
JIS L 1075:2013 Testing methods for pile retention of woven and knitted fabrics
JIS R 1680:2007 Testing method for determining particle retention in liquid for porous fine ceramics
JIS C 1400-24:2014 Wind turbines.Part 24: Lightning protection
JIS B 7762-13:2006 Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 13: Die grinders
JIS C 5402-16-5:2012 Connectors for electronic equipment -- Tests and measurements -- Part 16-5: Mechanical tests on contacts and terminations -- Test 16e: Gauge retention force (resilient contacts)
JIS B 1536-4:2008 Rolling bearings -- Boundary dimensions and tolerances of needle roller bearings -- Part 4: Thrust needle roller and cage assemblies, thrust washers
JIS B 7762-2:2006 Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 2: Chipping hammers and riveting hammers

US-FCR, Retention machine

FCR COE HL-91-13 FINAL REPORT-1991 SOIL CONSERVATION SERVICE LOW DROP STRUCTURE MODEL STUDY; HYDRAULIC MODEL INVESTIGATION
FCR AF R MAC 92-1-A-1981 FIRE PROTECTION SUPPORT FOR MAC AIRCRAFT DURING CONTINGENCIES, EXERCISES, AND JOINT AIRBORNE/AIR TRANSPORTABILITY TRAINING

YU-JUS, Retention machine

JUS N.R4.458-1991 Electromechanical components for electronic equipment. Test methods. Test 15 e: Contact retention in insert, cable nutation
JUS N.R4.492-1987 Electromechanical componenls for electronic equipment. Test methods. Test 16i: Grounding contact spring holding force

SE-SIS, Retention machine

SIS SS-EN 68-1979 Hand held (portable) power driven grinding machines — Mechanical safety

Standard Association of Australia （SAA）, Retention machine

AS 1038.17:2000(R2013)
AS 2313.1.13:2006 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Adhesion - Resistance to shear (holding power) at ambient temperature
AS/NZS 2350.18:2006 Methods of testing portland, blended and masonry cements - Determination of water retention of masonry cement
AS/NZS 2350.18:2001 Methods of testing portland, blended and masonry cements - Determination of water retention of masonry cement

AT-ON, Retention machine

ONORM M 9710-1987 Continuous mechanical handling equipment; screw conveyors; examples for the protection of shear and nip points
ONORM M 9706-1985 Continuous mechanical handling equipment; belt conveyors; examples for the protection of nip points by guards
ONORM M 9709-1987 Continuous mechanical handling equipment; belt conveyors; examples for the protection of nip points at idlers

European Committee for Electrotechnical Standardization（CENELEC）, Retention machine

EN 60952-2:2004 Aircraft batteries Part 2: Design and construction requirements (Remains Current)
EN 60952-1:2004 Aircraft batteries Part 1: General test requirements and performance levels (Remains Current)
EN 60952-3:2004 Aircraft batteries Part 3: Product specification and declaration of design and performance (DDP) (Remains Current)

Electronic Components, Assemblies and Materials Association, Retention machine

ECA EIA-364-19A-2001 TP-19A Torsional Insert Retention Test Procedure for Electrical Connectors [Superseded: ECA SP4894]

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Retention machine

JEDEC JESD22-A117A-2006 Electrically Erasable Programmable ROM (EEPROM) Program/Erase Endurance and Data Retention Test

未注明发布机构, Retention machine

BS EN 774:1996(2001) Garden equipment — Hand held, integrally powered hedge trimmers — Safety
DIN EN 774:1997 Garden equipment – Hand held, integrally powered hedge trimmers – Safety
GJB 845.4-1991 Submarine Nuclear Power Plant Quality Assurance and Safety Regulations Quality Assurance Organization
DIN EN ISO 11806-2:2022 Agricultural and forestry machinery – Safety requirements and testing for portable hand-held power cutters and grass trimmers – Part 2: Machines for use with a backpack power unit

国家林业和草原局, Retention machine

LY/T 3239-2020 Garden machinery handheld scarifier powered by lithium-ion battery
LY/T 3020-2018 Garden MachineryHandheld hedge trimmer powered by lithium-ion battery
LY/T 3022-2018 Garden machinery handheld chain saw powered by lithium-ion battery
LY/T 3169-2019 Garden Machinery Handheld pruning chain saw powered by lithium-ion battery

International Electrotechnical Commission (IEC), Retention machine

IEC 61400-24:2010 Wind turbines - Part 24: Lightning protection
IEC 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)
IEC 60512-15-2:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)

Professional Standard - Electricity, Retention machine

DL/T 1969-2019 Guidelines for configuration of hydraulic machinery protection in hydropower plants
DL/T 769-2001 Technical guide for microprocessor-based protection equipment of power system
DL/T 524-2002 Specification for power line carrier transceiver dedicated to protection
DL/T 524-1993 Specifications for special power line carrier transceivers for relay protection
DL/T 1012-2006 Code for acceptance test of TSI & ETS in fossil fuel power plant
DL/T 1638-2016 Technical specifications for wind turbine unit transformer protection measurement and control devices
DL/T 656-2016 Acceptance test procedure for steam turbine control and protection system in thermal power plant

国家林业局, Retention machine

LY/T 2887-2017 Garden machinery hand-held blowers and suction machines powered by gasoline engines Part 2: Combined type
LY/T 2569-2015 Garden Machinery Safety requirements and tests for handheld hedge trimmers powered by gasoline engines

European Telecommunications Standards Institute (ETSI), Retention machine

ETSI ETS 300 140-1992 Integrated Services Digital Network (ISDN); Call Hold (HOLD) Supplementary Service Functional Capabilities and Information Flows
ETSI PRETS 300 140-1991 Integrated Services Digital Network (ISDN); Call Hold (HOLD) Supplementary Service Functional Capabilities and Information Flows

Lithuanian Standards Office , Retention machine

LST ETS 300 140 Leid.1-2005 Integrated Services Digital Network (ISDN); Call Hold (HOLD) supplementary service; Functional capabilities and information flows
LST EN 12312-20-2005+A1-2009 Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units
LST EN 50308-2004 Wind turbines. Protective measures. Requirements for design, operation and maintenance
LST EN 50308-2004/AC-2005 Wind turbines. Protective measures. Requirements for design, operation and maintenance
LST EN 60512-15-1-2008 Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert (IEC 60512-15-1:2008)
LST EN 12312-14-2007+A1-2009 Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles
LST EN 60512-16-5-2008 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) (IEC 60512-16-5:2008)
LST EN 60512-16-9-2008 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force (IEC 60512-16-9:2008)
LST EN 2591-413-2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 413: Holding force of grounding spring system

ETSI - European Telecommunications Standards Institute, Retention machine

PRETS 300 140-1991 Integrated Services Digital Network (ISDN); Call Hold (HOLD) Supplementary Service Functional Capabilities and Information Flows
ETS 300 140-1992 Integrated Services Digital Network (ISDN); Call Hold (HOLD) Supplementary Service Functional Capabilities and Information Flows

American Gear Manufacturers Association, Retention machine

AGMA 13FTM18-2013 Gear Lubrication - Long Term Protection for Wind Turbines

AGMA - American Gear Manufacturers Association, Retention machine

13FTM18-2013 Gear Lubrication – Long Term Protection for Wind Turbines

Professional Standard - Railway, Retention machine

TB/T 2523-1995 Test method for grounding overload protection of electric locomotive

国家市场监督管理总局、中国国家标准化管理委员会, Retention machine

GB/T 4584-2022 Specification of active opto-electronic protective devices for presses
GB/T 38921-2020 Specification of steam turbine safty protection system for thermal power plant
GB/T 26548.12-2021 Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 12：Die grinders
GB/T 26548.7-2020 Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 7:Nibbler and shears
GB/T 26548.4-2020 Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 4:Straight grinders

GB-REG, Retention machine

REG NASA-LLIS-1139-2000 Lessons Learned ?Space Shuttle Program/Workforce/Workload Sustainment

Aerospace Industries Association/ANSI Aerospace Standards, Retention machine

AIA/NAS NASM14213-1999 Nut Element, Replaceable, Attached Retention Element (A.R.E), 450 Degrees F, CRES (A-286), 125 KSI Ftu
AIA/NAS NASM14200-2003 Nut, Floating, Self Locking, Attached Retention Element (A.R.E.), 450 Degrees F, Steel, 125 KSI Ftu, Replaceable Nut Element Rev 1
AIA/NAS NASM14201-2003 Nut, Floating, Self Locking, Attached Retention Element (A.R.E.), 450 Degrees F, Steel, 125 KSI Ftu, Replaceable Nut Element, 1/64 Oversize Rapair Rev 1
AIA/NAS NASM14214-1999 Nut Element, Attached Retention Element (A.R.E.), 450 Degrees F, Steel, (AISI 1050 or 4130), 125 KSI Ftu
AIA/NAS NASM33602-2011 BOLTS, SELF-RETAINING, AIRCRAFT, RELIABILITY AND MAINTAINABILITY, DESIGN AND USAGE REQUIREMENTS FOR (Rev 1)
AIA/NAS NASM14210-2003 Nut, Floating, Self Locking, Attached Retention Element (A.R.E.), 450 Degrees F, Cres (A-286), 125 KSI Ftu, Replaceable Nut Element Rev 1

Professional Standard - Aviation, Retention machine

HB/Z 293-1996 Guidelines for Electrical Power Applications and Transient Protection in Civil Aircraft

CH-SNV, Retention machine

SN 219 505.10-1978 Gewindeanschlu? G 5/8" innenFülldruck ≤ 200 bar

Institute of Electrical and Electronics Engineers (IEEE), Retention machine

IEEE 1616A-2010 Motor Vehicle Event Data Recorders (MVEDRs) Amendment 1: MVEDR Connector Lockout Apparatus (MVEDRCLA)
IEEE Std 3004.8-2016 IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power Systems
IEEE P3004.8/D11.0, July 2016 IEEE Draft Recommended Practice for Motor Protection in Industrial and Commercial Power Systems

IETF - Internet Engineering Task Force, Retention machine

RFC 6263-2011 Application Mechanism for Keeping Alive the NAT Mappings Associated with RTP / RTP Control Protocol (RTCP) Flows

North Atlantic Treaty Organization Standards Agency, Retention machine

STANAG 7039-1997 TEST PROCEDURES TO ENSURE COMPATIBILITY OF EQUIPMENT WITH AIRCRAFT ELECTRICAL POWER SYSTEMS

Jiangsu Provincial Standard of the People's Republic of China, Retention machine

DB32/T 3952-2020 Maintenance rules for manned lifting equipment of wind turbines

AIA/NAS - Aerospace Industries Association of America Inc., Retention machine

NASM33602-2011 BOLTS@ SELF-RETAINING@ AIRCRAFT@ RELIABILITY AND MAINTAINABILITY@ DESIGN AND USAGE REQUIREMENTS FOR (Rev 1)

Canadian Standards Association (CSA), Retention machine

CSA Z142-2010 Code régissant l’opération des presses : exigences concernant la santé, la sécurité et la protection (Cinquième Edition)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Retention machine

IEEE 3004.8-2016 Recommended Practice for Motor Protection in Industrial and Commercial Power Systems

Defense Logistics Agency, Retention machine

DLA MIL-DTL-83511 A SUPP 1A-2012 HEADSET-MICROPHONE AND HEADSET-ELECTRICAL (MEDIUM NOISE ATTENUATION, HEARING PROTECTIVE), GENERAL SPECIFICATION FOR
DLA QPL-83511-QPD-2013 Headset-Microphone and Headset-Electrical (Medium Noise Attenuation, Hearing Protective), General Specification for
DLA QPL-83511-16 NOTICE 1-2008 HEADSET-MICROPHONE AND HEADSET-ELECTRICAL (MEDIUM NOISE ATTENUATION, HEARING PROTECTIVE), GENERAL SPECIFICATION FOR
DLA QPL-83511-16 NOTICE 1-2011 HEADSET-MICROPHONE AND HEADSET-ELECTRICAL (MEDIUM NOISE ATTENUATION, HEARING PROTECTIVE), GENERAL SPECIFICATION FOR

CEN - European Committee for Standardization, Retention machine

EN ISO 10651-6:2004 Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 6: Home-care ventilatory support devices

BE-NBN, Retention machine

NBN E 48-101-1988

European Association of Aerospace Industries, Retention machine

AECMA PREN 2155-20-2000 Aerospace Series Test Methods for Transparent Materials for Aircraft Glazing Part 20: Determination of Retention of Strength After Crazing for as-Cast Acrylics Edition P 1