ZH
RU
ES

resistance spot welding

resistance spot welding, Total:500 items.

In the international standard classification, resistance spot welding involves: Welding, brazing and soldering, Products of non-ferrous metals, Road vehicle systems, Acoustics and acoustic measurements, Testing of metals, Photography, Nuclear energy engineering, Components for aerospace construction, Electrical accessories.

GM North America, resistance spot welding

• GM GMN3904-2003 Aluminum Resistance Spot Welding
• GM GM4488M-1995 Automotive Resistance Spot Welds
• GM GMN3904-2012 Aluminum Resistance Spot Welding Issue 2
• GM GMN10072-2004 Process Approval and Personnel Qualification for Ultrasonic Testing of Resistance Spot Welds

AT-ON, resistance spot welding

• ONORM EN 25821-1992 Resistance spot weldmg electrode caps
• OENORM EN ISO 5830:2021 Resistance spot welding - Male electrode caps (ISO 5830:1984)
• OENORM EN ISO 5829:2021 Resistance spot welding - Electrode adaptors, female taper 1:10 (ISO 5829:1984)
• OENORM EN ISO 18278-1:2021 Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO/DIS 18278-1:2021)

SE-SIS, resistance spot welding

• SIS SS-ISO 5184:1981 Straight resistance sp?t welding electrodes
• SIS SS-ISO 5821:1981 Resistance sp?t welding electrode caps
• SIS SS-ISO 5183:1981 Resistance sp?t welding electrode adaptors
• SIS SS-ISO 5829:1987 Resistance sp?t welding - Electrode adaptors, female taper 1:10
• SIS SS-ISO 5829:1986 Resistance sp?t welding - Electrode adaptors, female taper 1:10
• SIS SS 2614-1986 Welding equipment - Resistance welding - Cooling tubes for spot welding electrodes
• SIS SS 2614-1987 Welding equipment - Resistance welding - Cooling tubes for spot welding electrodes
• SIS SS-ISO 5183-1:1991 Resistance sp?t welding — Electrode adaptors, male taper 1:10 — Part 1: Conical fixing, taper 1:10
• SIS SS-ISO 5183-2:1991 Resistance sp?t welding — Electrode adap- tors, male taper 1:10 — Part 2: Parallel shank fixing for end-thrust electrodes
• SIS SS-EN 25 183-2-1991 Resistance sp?t welding equipment — Electrode adaptors, male taper 1:10 — Part 2: Parallel shank fixing for end-thrust electrodes

Association Francaise de Normalisation, resistance spot welding

• NF A82-103*NF EN 25184:1994 Straight resistance spot welding electrodes.
• NF A82-104-3:1992 Resistance spot welding electrode caps.
• NF A82-198*NF EN 29313:1992 Resistance spot welding equipment. Cooling tubes.
• NF EN 25184:1994 Pointes d'électrodes droites pour soudage par points par résistance
• NF EN ISO 5830:2021 Soudage par points par résistance - Embouts amovibles mâles d'électrode
• NF EN 29313:1992 Matériel de soudage par points par résistance - Tubes de refroidissement
• NF ISO 16338:2020 Soudage pour applications aérospatiales - Soudage par résistance par points et à la molette
• NF L10-904*NF ISO 16338:2020 Welding for aerospace applications - Resistance spot and seam welding
• NF A89-580:2007 Resistance welding - Peel and chisel testing of resistance spot and projection welds.
• NF A89-580*NF EN ISO 10447:2015 Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds
• NF A89-205:1981 Torsion-shear specimen for testing resistance spot welds.
• NF A89-206:1987 Welding and allied techniques. Resistance spot, projection and seam welded lap joints. Tension shear tests.
• NF A89-060*NF EN ISO 14327:2004 Resistance welding - Procedures for determining the weldability lobe for resistance spot, projection and seam welding
• NF A82-120-2*NF EN ISO 8430-2:2016 Resistance spot welding - Electrode holders - Part 2 : morse taper fixing
• NF A82-120-2:1992 Resistance spot welding. Electrode holders. Part 2 : morse taper fixing.
• NF EN ISO 8430-2:2016 Soudage par points par résistance - Porte-électrodes - Partie 2 : cône morse de fixation
• NF EN ISO 8430-1:2016 Soudage par points par résistance - Porte-électrodes - Partie 1 : cône de fixation 1:10
• NF A82-104-3*NF EN ISO 5821:2010 Resistance welding - Spot welding electrode caps
• NF A82-120-1*NF EN ISO 8430-1:2016 Resistance spot welding - Electrode holders - Part 1 : tapper fixing 1:10
• NF A82-120-1:1992 Resistance spot welding. Electrode holders. Part 1 : tapper fixing 1:10.
• NF A82-105:2011 Resistance spot welding - Electrode adaptors, female taper 1:10.
• NF A82-105:2021 Resistance spot welding - Electrode adaptors, female taper 1:10
• NF A89-568*NF EN ISO 14271:2017 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
• NF EN ISO 5829:2021 Soudage par points par résistance - Allonges d'électrode à embout amovible (cône femelle 1/10)
• NF A82-120-3*NF EN ISO 8430-3:2016 Resistance spot welding - Electrode holders - Part 3 : parallel shank fixing for end thrust
• NF A82-120-3:1992 Resistance spot welding. Electrode holders. Part 3 : parallel shank fixing for end thrust.
• NF A89-566*NF EN ISO 14329:2004 Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, seam and projection welds
• NF A87-001-1:2005 Resistance welding - Weldability - Part 1 : assessment of weldability for resistance spot, seam and projection welding of metallic materials.
• NF EN ISO 14271:2017 Soudage par résistance - Essais de dureté Vickers (force réduite et microdureté) sur soudures par résistance par points, par bossages et à la molette
• NF EN ISO 18594:2008 Soudage par résistance par points, par bossages et à la molette - Méthode pour la détermination de la résistance de transition sur l'aluminium et sur l'acier
• NF EN ISO 8430-3:2016 Soudage par points par résistance - Porte-électrodes - Partie 3 : emmanchement cylindrique pour poussée en bout
• NF EN ISO 10447:2022 Soudage par résistance - Essais des soudures - Essais de pelage et de déboutonnage au burin appliqués aux soudures par résistance par points et par bossages
• NF A89-240:1987 Welding and allied processes. Resistance spot, projection and seam welded lap joints. Classification of defects with explanatory comments.
• NF EN ISO 17653:2012 Soudage par résistance - Essais destructifs des soudures sur matériaux métalliques - Essai de torsion de soudure par résistance par points
• NF EN ISO 14373:2015 Soudage par résistance - Mode opératoire pour le soudage par points des aciers à bas carbone revêtus et non revêtus
• NF L06-385:1987 Welded and brazed assemblies for aerospace constructions. Resistance spot or seam welding machines. Qualification specifications.
• NF A89-571*NF EN ISO 14324:2004 Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints.
• NF EN ISO 18278-1:2022 Soudage par résistance - Soudabilité - Partie 1 : exigences générales pour l'évaluation de la soudabilité pour le soudage par résistance par points, à la molette et par bossages des matériaux métalliques
• NF A89-570:2002 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds.
• NF A89-565:1987 Welding and allied processes. Radiographic testing of resistance spot and seam welded joints. Recommended practice.
• NF A89-569:2001 Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds.
• NF A82-115:2008 Resistance welding equipment - Angles for mounting spot welding electrodes.
• NF L06-383:1987 Welded and brazed assemblies for aerospace constructions. Resistance spot or seam welded assemblies. Quality of welded assemblies.
• NF A89-567:2001 Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds.
• NF F01-812-2:1992 Railway rolling stock. Arc and resistance welded joints of steels. Part 2 : acceptance criteria for defects in electric resistance welded joints.
• NF A82-104-2*NF EN ISO 5183-2:2001 Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2 : parallel shank fixing for end-thrust electrodes
• NF EN ISO 14329:2004 Soudage par résistance - Essais destructifs des soudures - Types de rupture et dimensions géométriques pour les assemblages soudés par résistance par points, à la molette et par brossages
• NF A87-001-1*NF EN ISO 18278-1:2015 Resistance welding - Weldability - Part 1 :general requirement for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials

Professional Standard - Machinery, resistance spot welding

• JB/T 3948-1999 Resistance spot welding electrode caps
• JB/T 3158-1999 Straight resistance spot welding electrodes
• JB/T 3947-1999 Resistance spot welding electrode adaptors
• JB/T 9960-1999 Resistance spot welding-male electrode caps
• JB/T 6231-1992 Electric pole cooling coils for resistance spot welding equipments
• JB/T 9959-1999 Resistance spot welding-electrode adaptors,female taper 1:10
• JB/T 10256.1-2001 Resistance spot welding - Electrode holders Part 1:Taper fixing 1:10
• JB/T 10256.2-2001 Resistance spot welding - Electrode holders Part 2:Morse taper fixing
• JB/T 10256.3-2001 Resistance spot welding - Electrode holders Part 3:Parallel shank fixing for end thrust

Korean Agency for Technology and Standards (KATS), resistance spot welding

• KS B ISO 5184-2002(2017) Straight resistance spot welding electrodes
• KS B ISO 5184:2022 Straight resistance spot welding electrodes
• KS B ISO 5184:2002 Straight resistance spot welding electrodes
• KS C ISO 5830-2001(2011) Resistance spot welding－Male electrode caps
• KS C ISO 5830:2001 Resistance spot welding-Male electrode caps
• KS C ISO 5830:2015 Resistance spot welding－Male electrode caps
• KS C ISO 9313-2016(2021) Resistance spot welding equipment－Cooling tubes
• KS B ISO 5829-2002(2017) Resistance spot welding－Electrode adaptors, female taper 1：10
• KS C ISO 5829-2001(2006) Resistance spot welding－Electrode adaptors, female taper 1：10
• KS B ISO 14327:2019 Resistance welding — Procedures for determining the weldablity lobe for resistance spot, projection and seam welding
• KS C ISO 5829:2010 Resistance spot welding－Electrode adaptors, female taper 1：10
• KS B ISO 5829:2002 Resistance spot welding－Electrode adaptors, female taper 1：10
• KS W 2028-2013 Resistance Spot and Seam Welding Process for Aerospace Use
• KS B ISO 5829:2022 Resistance spot welding — Electrode adaptors, female taper 1：10
• KS C ISO 8430-1-2016(2021) Resistance spot welding－Electrode holders－Part 1：Taper fixing 1：10
• KS C ISO 8430-2-2016(2021) Resistance spot welding－Electrode holders－Part 2：Morse taper fixing
• KS B ISO 14327:2004 Resistance welding－Procedures for determining the weldability lobe for resistance spot, projection and seam welding
• KS D 0403-1998 Routine test of resistance spot and projection welds
• KS C ISO 8430-3:2001 Resistance spot welding-Electrode holders-Part 3:Parallel shank fixing for end thrust
• KS C ISO 8430-2:2001 Resistance spot welding-Electrode holders-Part 2:Morse taper fixing
• KS C ISO 8430-3:2016 Resistance spot welding－Electrode holders－Part 3：Parallel shank fixing for end thrust
• KS C ISO 8430-2:2016 Resistance spot welding－Electrode holders－Part 2：Morse taper fixing
• KS B ISO 14271:2019 Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
• KS C ISO 8430-1:2001 Resistance spot welding-Electrode holders-Part 1:Taper fixing 1:10
• KS C ISO 8430-3-2016(2021) Resistance spot welding－Electrode holders－Part 3：Parallel shank fixing for end thrust
• KS C ISO 8430-1:2016 Resistance spot welding－Electrode holders－Part 1：Taper fixing 1：10
• KS C ISO 18594:2007 Resistance spot－, projection－, and seam－welding－Method for determining the transition resistance on aluminium and steel material
• KS B ISO 14324:2016 Resistance spot welding－Destructive tests of welds－Methods for the fatigue testing of spot welded joints
• KS B ISO 14324-2016(2021) Resistance spot welding－Destructive tests of welds－Methods for the fatigue testing of spot welded joints
• KS C ISO 18594-2007(2017) Resistance spot－, projection－, and seam－welding－Method for determining the transition resistance on aluminium and steel material
• KS C ISO 18594:2022 Resistance spot-, projection-, and seam-welding — Method for determining the transition resistance on aluminium and steel material
• KS B ISO 17653-2003(2013) Destructive tests on welds in metallic materials－Torsion test of resistance spot welds
• KS B ISO 17653:2003 Destructive tests on welds in metallic materials-Torsion test of resistance spot welds
• KS B ISO 17653:2014 Destructive tests on welds in metallic materials－Torsion test of resistance spot welds
• KS C ISO 12145-2001(2011) Resistance welding equipment－Angles for mountingspot welding electrodes
• KS C ISO 14273:2001 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds
• KS C ISO 14273:2017 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds
• KS C ISO 14270-2016(2021) Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
• KS B ISO 14271:2004 Vickers hardness testing of resistance spot, projection and seam welds(low load and microhardness)
• KS C ISO 14272:2001 Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds
• KS C ISO 14272:2013 Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds
• KS C ISO 14270:2001 Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
• KS C ISO 14270:2016 Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
• KS B ISO 5183-2:2019 Resistance spot welding — Electrode adaptors, male taper 1：10 —Part 2: Parallel shank fixing for end-thrust electrodes
• KS B ISO 5183-2:2004 Resistance spot welding－Electrode adaptors, male taper 1：10－Part 2：Parallel shank fixing for end-thrust electrodes
• KS B ISO 14273:2021 Resistance welding — Destructive testing of welds— Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds
• KS B ISO 14273:2016 Specimen dimensions and procedure for shear testingresistance spot and embossed projection welded joints

KR-KS, resistance spot welding

• KS B ISO 5184-2022 Straight resistance spot welding electrodes
• KS C ISO 9313-2016 Resistance spot welding equipment－Cooling tubes
• KS B ISO 10447-2009 Resistance welding－Peel and chisel testing of resistance spot and projection welds
• KS B ISO 14327-2019 Resistance welding — Procedures for determining the weldablity lobe for resistance spot, projection and seam welding
• KS B ISO 5829-2022 Resistance spot welding — Electrode adaptors, female taper 1：10
• KS C ISO 8430-1-2016 Resistance spot welding－Electrode holders－Part 1：Taper fixing 1：10
• KS C ISO 8430-2-2016 Resistance spot welding－Electrode holders－Part 2：Morse taper fixing
• KS B ISO 14271-2019 Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
• KS C ISO 8430-3-2016 Resistance spot welding－Electrode holders－Part 3：Parallel shank fixing for end thrust
• KS C ISO 18594-2022 Resistance spot-, projection-, and seam-welding — Method for determining the transition resistance on aluminium and steel material
• KS B ISO 14272-2016 Specimen dimensions and procedure for cross tension testingresistance spot and embossed projection welded joints
• KS B ISO 14324-2016 Resistance spot welding－Destructive tests of welds－Methods for the fatigue testing of spot welded joints
• KS B ISO 5183-2-2019 Resistance spot welding — Electrode adaptors, male taper 1：10 —Part 2: Parallel shank fixing for end-thrust electrodes
• KS B ISO 14273-2021 Resistance welding — Destructive testing of welds— Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds

German Institute for Standardization, resistance spot welding

• DIN ISO 5184:1984-04 Straight resistance spot welding electrodes
• DIN ISO 5184:1984 Straight resistance spot welding electrodes
• DIN EN ISO 5830:2021-03 Resistance spot welding - Male electrode caps (ISO 5830:1984); German version EN ISO 5830:2021
• DIN EN ISO 5821:2010-04 Resistance welding - Spot welding electrode caps (ISO 5821:2009); German version EN ISO 5821:2009
• DIN EN ISO 14329:2003 Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, seam and projection welds (ISO 14329:2003); German version EN ISO 14329:2003
• DIN EN 29313:1992 Resistance spot welding equipment; cooling tubes (ISO 9313:1989); german version EN 29313:1992
• DIN EN ISO 5829:2021-03 Resistance spot welding - Electrode adaptors, female taper 1:10 (ISO 5829:1984); German version EN ISO 5829:2021
• DIN EN 29313:1992-07 Resistance spot welding equipment; cooling tubes (ISO 9313:1989); german version EN 29313:1992
• DIN EN ISO 14327:2004 Resistance welding - Procedures for determining the weldability lobe for resistance spot, projection and seam welding (ISO 14327:2004); German version EN ISO 14327:2004
• DIN EN ISO 10447:2023-03 Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2022); German version EN ISO 10447:2022
• DIN EN 28430-2:1992 Resistance spot welding; electrode holders; part 2: Morse taper fixing (ISO 8430-2:1988); german version EN 28430-2:1992
• DIN EN 28430-1:1992 Resistance spot welding; electrode holders; part 1: taper fixing 1:10 (ISO 8430-1:1988); german version EN 28430-1:1992
• DIN EN ISO 8430-2:2016-12 Resistance spot welding - Electrode holders - Part 2: Morse taper fixing (ISO 8430-2:2016); German version EN ISO 8430-2:2016
• DIN EN ISO 8430-1:2016-12 Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10 (ISO 8430-1:2016); German version EN ISO 8430-1:2016
• DIN EN ISO 14271:2018-01 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017); German version EN ISO 14271:2017
• DIN EN ISO 5821:2010 Resistance welding - Spot welding electrode caps (ISO 5821:2009); German version EN ISO 5821:2009
• DIN EN ISO 5830:2021 Resistance spot welding - Male electrode caps (ISO 5830:1984); German version EN ISO 5830:2021
• DIN EN ISO 10447:2023 Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2022)
• DIN EN 28430-3:1992 Resistance spot welding; electrode holders; part 3: parallel shank fixing for end thrust (ISO 8430-3:1988); german version EN 28430-3:1992
• DIN EN ISO 18278-1:2005 Resistance welding - Weldability - Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2004); German version EN ISO 18278-1:2004
• DIN EN ISO 14271:2018 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)
• DIN EN ISO 14324:2003-12 Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints (ISO 14324:2003); German version EN ISO 14324:2003
• DIN EN ISO 14324:2003 Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints (ISO 14324:2003); German version EN ISO 14324:2003
• DIN EN ISO 18594:2007-06 Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and steel material (ISO 18594:2007); German version EN ISO 18594:2007
• DIN EN ISO 14272:2002 Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds (ISO 14272:2000); German version EN ISO 14272:2001
• DIN EN ISO 18278-1:2023-06 Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2022); German version EN ISO 18278-1:2022
• DIN EN ISO 17653:2012-08 Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds (ISO 17653:2012); German version EN ISO 17653:2012
• DIN EN ISO 10447:2015 Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2015); German version EN ISO 10447:2015
• DIN EN ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection and seam welds (ISO 14271:2011); German version EN ISO 14271:2011
• DIN EN ISO 8430-3:2016-12 Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:2016); German version EN ISO 8430-3:2016
• DIN EN ISO 5183-2:2002-03 Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes (ISO 5183-2:2000); German version EN ISO 5183-2:2002
• DIN EN ISO 14270:2016 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds (ISO 14270:2016); German version EN ISO 14270:2016
• DIN EN ISO 5829:2021 Resistance spot welding - Electrode adaptors, female taper 1:10 (ISO 5829:1984); German version EN ISO 5829:2021
• DIN EN ISO 8430-2:2016 Resistance spot welding - Electrode holders - Part 2: Morse taper fixing (ISO 8430-2:2016); German version EN ISO 8430-2:2016
• DIN EN ISO 8430-1:2016 Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10 (ISO 8430-1:2016); German version EN ISO 8430-1:2016
• DIN EN ISO 14271:2012 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection and seam welds (ISO 14271:2011 + Cor 1:2012); German version EN ISO 14271:2011 + AC:2012

未注明发布机构, resistance spot welding

• BS EN 25184:1995(1999) Straightresistance spot welding electrodes
• GJB 724A-1998 Stainless steel resistance spot welding and seam welding quality inspection
• BS 1140:1993(1998) Specification for Resistance spot welding of uncoated and coated low carbon steel
• BS EN ISO 18594:2007(2010) Resistance spot -, projection - and seam - welding — Methodfordetermining the transition resistance on aluminium and steel material
• DIN EN ISO 18278-1:2022 Resistance welding – Weldability – Part 1: General requirements for the assessment of the weldability of resistance spot, roll seam and projection welding of metallic materials

Society of Automotive Engineers (SAE), resistance spot welding

• SAE AMSW6858-1999 Welding, Resistance: Spot and Seam
• SAE AMSW6858B-2007 Welding, Resistance: Spot and Seam
• SAE AMSW6858A-2005 Welding, Resistance: Spot and Seam

SAE - SAE International, resistance spot welding

• SAE AMS-W-6858A-2000 Welding@ Resistance: Spot and Seam
• SAE AMS-W-6858-1999 Welding@ Resistance: Spot and Seam
• SAE AMS-W-6858B-2007 Welding@ Resistance: Spot and Seam
• SAE J2667-2004 STRSW (Squeeze Type Resistance Spot Welding) Equipment Acceptance Criteria for the Collision Repair Industry
• SAE J2667-2019 STRSW (Squeeze Type Resistance Spot Welding) Equipment Acceptance Criteria for the Collision Repair Industry

Danish Standards Foundation, resistance spot welding

• DS/EN 25184:1994 Straight resistance spot welding electrodes
• DS/ISO 5184:1980 Straight resistance spot welding electrodes
• DS/EN ISO 5821:2010 Resistance welding - Spot welding electrode caps
• DS/EN ISO 5830:2021 Resistance spot welding – Male electrode caps (ISO 5830:1984)
• DS/EN 29 313:1992 Resistance spot welding equipment - Cooling tubes
• DS/EN 29313:1992 Resistance spot welding equipment. Cooling tubes
• DS/ISO 9313:1992 Resistance spot welding equipment - Cooling tubes
• DS/EN ISO 10447:2007 Resistance welding - Peel and chisel testing of resistance spot and projection welds
• DS/EN ISO 5829:2021 Resistance spot welding – Electrode adaptors, female taper 1:10 (ISO 5829:1984)
• DS/EN ISO 14327:2004 Resistance welding - Procedures for determining the weldability lobe for resistance spot, projection and seam welding
• DS/EN 28 430-1:1992 Resistance spot welding - Electrode holders - Part 1: Taper fixing 1 : 10
• DS/EN 28430-1:1992 Resistance spot welding. Electrode holders. Part 1: Taper fixing 1:10
• DS/EN 28430-2:1992 Resistance spot welding. Electrode holders. Part 2: Morse taper fixing
• DS/ISO 8430-1:1992 Resistance spot welding - Electrode holders - Part 1: Taper fixing 1 : 10
• DS/ISO 8430-2:1992 Resistance spot welding - Electrode holders - Part 2: Morse taper fixing
• DS/EN 28 430-3:1992 Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust
• DS/EN ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
• DS/EN ISO 14271/AC:2012 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
• DS/EN 28430-3:1992 Resistance spot welding. Electrode holders. Part 3: Parallel shank fixing for end thrust
• DS/EN ISO 18278-1:2004 Resistance welding - Weldability - Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic materials
• DS/ISO 8430-3:1992 Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust
• DS/EN ISO 14324:2003 Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints
• DS/EN ISO 18594:2007 Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and steel material
• DS/EN ISO 17653:2012 Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds
• DS/EN ISO 5183-1:2000 Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10
• DS/EN ISO 14272:2002 Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds
• DS/EN ISO 5183-2:2002 Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes
• DS/EN ISO 14273:2002 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds
• DS/ISO 5183:1980 Resistance spot welding electrode adaptors
• DS/EN ISO 14270:2002 Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
• DS/EN ISO 14329:2003 Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, seam and projection welds

ZA-SANS, resistance spot welding

• SANS 5184:1979 Straight resistance spot welding electrodes
• SANS 5821:1979 Resistance spot welding electrode caps
• SANS 8430-2:1988 Resistance spot welding - Electrode holders Part 2: Morse taper fixing
• SANS 8430-1:1988 Resistance spot welding - Electrode holders Part 1: Taper fixing 1:10
• SANS 8430-3:1988 Resistance spot welding - Electrode holders Part 3: Parallel shank fixing for end thrust
• SANS 5183-2:2008 Resistance spot welding - Electrode adaptors, male taper 1:10 Part 2: Parallel shank fixing for end-thrust electrodes

International Organization for Standardization (ISO), resistance spot welding

• ISO 5184:1979 Straight resistance spot welding electrodes
• ISO 5830:1984 Resistance spot welding; Male electrode caps
• ISO 5821:1979 Resistance spot welding electrode caps
• ISO 5183:1979 Resistance spot welding electrode adaptors
• ISO 8430-1:2016 Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10
• ISO 8430-2:2016 Resistance spot welding - Electrode holders - Part 2: Morse taper fixing
• ISO 14327:2004 Resistance welding - Procedures for determining the weldability lobe for resistance spot, projection and seam welding
• ISO 10447:2022 Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds
• ISO 8430-3:2016 Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust
• ISO 8430-1:1988 Resistance spot welding; electrode holders; part 1: taper fixing 1:10
• ISO 8430-2:1988 Resistance spot welding; electrode holders; part 2: Morse taper fixing
• ISO 5829:1984 Resistance spot welding; Electrode adaptors, female taper 1 : 10
• ISO 5821:2009 Resistance welding - Spot welding electrode caps
• ISO 18594:2007 Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and steel material
• ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
• ISO 14271:2017 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
• ISO 14324:2003 Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints
• ISO 18278-1:2004 Resistance welding - Weldability - Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic materials
• ISO 18278-1:2022 Resistance welding — Weldability — Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials
• ISO 14270:2016 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
• ISO 8430-3:1988 Resistance spot welding; electrode holders; part 3: parallel shank fixing for end thrust
• ISO 17653:2003 Destructive tests on welds in metallic materials — Torsion test of resistance spot welds
• ISO 17653:2012 Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds
• ISO 18278-1:2015 Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials
• ISO 14273:2000 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds
• ISO 16338:2013 Welding for aerospace applications - Resistance spot and seam welding
• ISO 14272:2000 Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds
• ISO 14271:2000 Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness)
• ISO 14272:2016 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds
• ISO 14273:2016 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds
• ISO 14329:2003 Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, seam, and projection welds
• ISO 14270:2000 Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
• ISO 12145:1998 Resistance welding equipment - Angles for mounting spot welding electrodes
• ISO 8430-3:1988/Cor 1:1990 Resistance spot welding; electrode holders; part 3: parallel shank fixing for end thrust; technical corrigendum 1
• ISO 5183-1:1988 Resistance spot welding; electrode adaptors, male taper 1 : 10; part 1: conical fixing, taper 1 : 10
• ISO 5183-2:2000 Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes
• ISO 5183-2:1988 Resistance spot welding; electrode adaptors, male taper 1 : 10; part 2: parallel shank fixing for end-thrust electrodes

British Standards Institution (BSI), resistance spot welding

• BS EN 25184:1995 Straight resistance spot welding electrodes
• BS EN ISO 5830:2021 Resistance spot welding. Male electrode caps
• BS EN ISO 14329:2003 Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, seam and projection welds
• BS 4215-2:1987 Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for straight resistance spot welding electrodes
• BS EN 29313:1992 Specification for resistance spot welding equipment. Cooling tubes
• BS EN ISO 10447:2007 Resistance welding - Peel and chisel testing of resistance spot and projection welds
• BS EN ISO 10447:2015 Resistance welding. Testing of welds. Peel and chisel testing of resistance spot and projection welds
• BS EN ISO 5821:2009 Resistance welding - Spot welding electrode caps
• BS EN ISO 14327:2004 Resistance welding - Procedures for determining the weldability lobe for resistance spot, projection and seam welding
• BS ISO 16338:2017 Tracked Changes. Welding for aerospace applications. Resistance spot and seam welding
• BS EN ISO 14271:2017 Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
• BS EN ISO 5829:2021 Resistance spot welding. Electrode adaptors, female taper 1:10
• BS EN ISO 8430-3:2016 Resistance spot welding. Electrode holders. Parallel shank fixing for end thrust
• BS EN ISO 18278-1:2004 Resistance welding - Weldability - Assessment of weldability for resistance spot, seam and projection welding of metallic materials
• BS 1140:1993 Specification for resistance spot welding of uncoated and coated low carbon steel
• 21/30439477 DC BS EN ISO 10447. Resistance welding. Testing of welds. Peel and chisel testing of resistance spot and projection welds
• BS EN ISO 10447:2022 Tracked Changes. Resistance welding. Testing of welds. Peel and chisel testing of resistance spot and projection welds
• BS EN ISO 14271:2011 Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
• BS EN ISO 18278-1:2015 Resistance welding. Weldability. General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials
• BS EN ISO 18278-1:2022 Tracked Changes. Resistance welding. Weldability. General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials
• BS EN 28430-3:1992 Specification for resistance spot welding - Electrode holders - Parallel shank fixing for end thrust
• BS EN ISO 14324:2003 Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints
• BS 4215-15:1990 Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for insulated pins for use in electrode back-ups
• BS EN ISO 17653:2012 Resistance welding. Destructive tests on welds in metallic materials. Torsion test of resistance spot welds
• BS EN ISO 18594:2007 Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and steel material
• BS EN ISO 14272:2016 Resistance welding. Destructive testing of welds. Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds
• BS EN ISO 14273:2001 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds
• BS EN ISO 14270:2001 Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
• BS 4215-7:1987 Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for male electrode caps
• 21/30431359 DC BS EN ISO 18278-1. Resistance welding. Weldability. Part 1. General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials
• BS EN ISO 14272:2001 Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds
• BS 4215-6:1987 Resistance spot welding electrodes, electrode holders and ancillary equipment - Specification for electrode adaptors, female taper 1:10

IN-BIS, resistance spot welding

• IS 4972-1968
• IS 819-1957
• IS 7810-1975

European Committee for Standardization (CEN), resistance spot welding

• EN ISO 5830:2021 Resistance spot welding - Male electrode caps (ISO 5830:1984)
• EN 25821:1991 Resistance Spot Welding Electrode Caps
• EN 25184:1994 Straight resistance spot welding electrodes (ISO 5184:1979)
• EN 29313:1992 Resistance spot welding equipment - Cooling tubes (ISO 9313:1989)
• EN ISO 8430-2:2016 Resistance spot welding - Electrode holders - Part 2: Morse taper fixing (ISO 8430-2:2016)
• EN ISO 5829:2021 Resistance spot welding - Electrode adaptors, female taper 1:10 (ISO 5829:1984)
• EN ISO 5821:2009 Resistance welding - Spot welding electrode caps
• EN ISO 8430-1:2016 Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10
• EN ISO 14327:2004 Resistance welding - Procedures for determining the weldability lobe for resistance spot, projection and seam welding
• EN ISO 10447:2015 Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds
• EN ISO 8430-3:2016 Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:2016)
• EN ISO 14271:2017 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot@ projection@ and seam welds
• EN ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (Incorporating corrigendum April 2012)
• EN 28430-3:1992 Resistance Spot Welding - Electrode Holders - Part 2: Morse Taper Fixing
• EN 28430-1:1992 Resistance Spot Welding - Electrode Holders - Part 1 : Taper Fixing 1:10
• EN ISO 17653:2012 Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds
• EN ISO 18594:2007 Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and steel material
• EN ISO 18278-1:2022 Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2022)
• EN ISO 14324:2003 Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints ISO 14324:2003
• EN ISO 17653:2003 Destructive tests on welds in metallic materials Torsion test of resistance spot welds ISO 17653:2003
• EN ISO 18278-1:2015 Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot@ seam and projection welding of metallic materials
• EN ISO 14329:2003 Resistance welding Destructive tests of welds Failure types and geometric measurements for resistance spot, seam and projection welds ISO 14329:2003
• prEN ISO 18278-1:2021 Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO/DIS 18278-1:2021)
• EN ISO 14270:2016 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for mechanized peel testing resistance spot@ seam and embossed projection welds
• EN ISO 14273:2016 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds
• EN 25183-1:1991 Resistance spot welding; electrode adaptors, male taper 1:10; part 1: conical fixing, taper 1:10 (ISO 5183-1:1988)
• EN ISO 14273:2001 Specimen Dimensions and Procedure for Shear Testing Resistance Spot, Seam and Embossed Projection Welds
• EN ISO 14272:2001 Specimen Dimensions and Procedure for Cross Tension Testing Resistance Spot and Embossed Projection Welds

IT-UNI, resistance spot welding

• UNI EN ISO 5830:2021 Resistance spot welding - Male electrode caps
• UNI EN ISO 5829:2021 Resistance spot welding - Electrode adaptors, female taper 1:10

ES-UNE, resistance spot welding

• UNE-EN ISO 5830:2021 Resistance spot welding - Male electrode caps (ISO 5830:1984)
• UNE-EN ISO 5829:2021 Resistance spot welding - Electrode adaptors, female taper 1:10 (ISO 5829:1984)
• UNE-EN ISO 8430-1:2016 Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10 (ISO 8430-1:2016)
• UNE-EN ISO 8430-2:2016 Resistance spot welding - Electrode holders - Part 2: Morse taper fixing (ISO 8430-2:2016)
• UNE-EN ISO 14271:2018 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)
• UNE-EN ISO 10447:2023 Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2022)
• UNE-EN ISO 8430-3:2016 Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:2016)
• UNE-EN ISO 18278-1:2023 Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2022)

RO-ASRO, resistance spot welding

• SR ISO 5184:1993 Straight resistance spot welding electrodes
• STAS 10626/3-1981 Electrodes for resistance spot welding ADAPTORS FOR STRAIGHT ELECTRODES Dimensions
• STAS 11182-1979 ELECTRODES FOR RESISTANCE SPOT, PROJECTION AND SEAM WELDING Classification
• STAS 10626/1-1981 Electrodes for resistance spot welding STRAIGHT ELECTRODES Forms and dimensions
• STAS ISO 8430-2:1992 Resistance spot welding. Electrode holders. Part 2: Morse taper fixing
• STAS ISO 8430-1:1992 Resistance spot welding. Electrode holders. Part 1: Taper fixing 1:10
• STAS ISO 8430-3:1992 Resistance spot welding. Electrode holders. Part 3: Parallel shank fixing for end thrust

AENOR, resistance spot welding

• UNE-EN 25184:1996 STRAIGHT RESISTANCE SPOT WELDING ELECTRODES. (ISO 5184:1979).
• UNE-EN ISO 5821:2010 Resistance welding - Spot welding electrode caps (ISO 5821:2009)
• UNE-EN 29313:1993 RESISTANCE SPOT WELDING EQUIPMENT. COOLING TUBES (ISO 9313:1989).
• UNE-EN ISO 14327:2005 Resistance welding - Procedures for determining the weldability lobe for resistance spot, projection and seam welding (ISO 14327:2004)
• UNE-EN ISO 14324:2004 Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints (ISO 14324:2003)
• UNE-EN ISO 18594:2008 Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and steel material (ISO 18594:2007)
• UNE-EN ISO 17653:2012 Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds (ISO 17653:2012)
• UNE-EN ISO 5183-2:2002 Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes. (ISO 5183-2:2000)

NL-NEN, resistance spot welding

• NEN-ISO 5184:1994 Straight resistance spot welding electrodes(ISO 5184:1979)

BE-NBN, resistance spot welding

• NBN 885-02-1972
• NBN-EN 25184-1994
• NBN-EN 25821-1992

U.S. Military Regulations and Norms, resistance spot welding

• ARMY MIL-DTL-45210 B VALID NOTICE 1-2004 WELDING, RESISTANCE, SPOT: WELDABLE ALUMINUM ALLOYS
• ARMY MIL-DTL-45210 B-1999 WELDING, RESISTANCE, SPOT: WELDABLE ALUMINUM ALLOYS

American National Standards Institute （ANSI), resistance spot welding

• ANSI/AWS D8.6/D8.6M:2005 Specification for Automatic Resistance Spot Welding Electrodes
• ANSI/AWS D8.7:2004 Recommended Practice for Automotive Weld Quality – Resistance Spot Welding
• ANSI/AWS D8.1M:2021 Specification for Automotive Weld Quality Resistance Spot Welding of Steel (3rd Edition)

Lithuanian Standards Office , resistance spot welding

• LST EN 25184-2000 Straight resistance spot welding electrodes (ISO 5184:1979)
• LST EN ISO 5830:2021 Resistance spot welding - Male electrode caps (ISO 5830:1984)
• LST EN ISO 5821:2010 Resistance welding - Spot welding electrode caps (ISO 5821:2009)
• LST EN ISO 10447:2007 Resistance welding - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2006)
• LST EN 29313-2000 Resistance spot welding equipment - Cooling tubes (ISO 9313:1989)
• LST EN ISO 5829:2021 Resistance spot welding - Electrode adaptors, female taper 1:10 (ISO 5829:1984)
• LST EN ISO 10447:2015 Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2015)
• LST EN 28430-2-2000 Resistance spot welding - Electrode holders - Part 2: Morse taper fixing (ISO 8430-2:1988)
• LST EN 28430-1-2000 Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10 (ISO 8430-1:1988)
• LST EN ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2011)
• LST EN ISO 14327:2004 Resistance welding - Procedures for determining the weldability lobe for resistance spot, projection and seam welding (ISO 14327:2004)
• LST EN ISO 18278-1:2005 Resistance welding - Weldability - Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2004)
• LST EN 28430-3-2000 Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:1988)
• LST EN ISO 14271:2011/AC:2012 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds - Technical Corrigendum 1 (ISO 14271:2011/Cor.1:2012)
• LST EN ISO 14324:2004 Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints (ISO/FDIS 14324:2003)
• LST EN ISO 18594:2007 Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and steel material (ISO 18594:2007)
• LST EN ISO 17653:2012 Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds (ISO 17653:2012)
• LST EN ISO 5183-2:2003 Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes (ISO 5183-2:2000)

American Welding Society (AWS), resistance spot welding

• AWS D8.6-2005 Specification for Automotive Resistance Spot Welding Electrodes Supplement to RWMA Bulletin 16
• AWS D8.1M-2007 Specification for Automotive Weld Quality?Resistance Spot Welding of Steel
• AWS D8.1M-2013 Specification for Automotive Weld Quality-Resistance Spot Welding of Steel (2nd Edition)
• AWS D8.1M-2021 Specification for Automotive Weld Quality Resistance Spot Welding of Steel (3rd Edition)
• AWS D8.7-1988 Recommended Practices for Automotive Weld Quality-Resistance Spot Welding (SAE J 1188) R(1994)
• AWS D8.7M-2005 Recommended Practices for Automotive Weld Quality Resistance SpotWelding
• AWS D8.9M-2012 Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials (Third Edition)

Association of German Mechanical Engineers, resistance spot welding

• DVS 2910-1974 Resistance spot welding of hot-galvanized thin sheets
• DVS 2907-1991
• DVS 2919-2013
• DVS 2910-2001
• DVS 2910-1993
• DVS 2933-1990
• DVS 2933-2004
• DVS 2926-2001
• DVS 2709-1983 Resistance spot welded samples for the determination of the fatigue strength
• DVS 2902-1-1987
• DVS 2902-2-1990
• DVS 2924-1998 "Appliances and tools for resistance spot welding, projection seam welding and roller seam welding"
• DVS 2939-1996
• DVS 2919-2001
• DVS 2924-1984 "Appliances and tools for resistance spot welding, projection seam welding and roller seam welding"
• DVS 2939-2006
• DVS 2902-2-2001 Resistance spot welding of steels with individual thicknesses of up to 3 mm - Spot weldability
• DVS 2935-1-2004
• DVS 2521-3-2012
• DVS 2935-2001
• DVS 2935-1990
• DVS 1609-1975 Resistance spot welding of high-alloy steels in railway vehicle construction
• DVS 2902-1-2001 Resistance spot welding of steels with individual thicknesses of up to 3 mm - Overview
• DVS 2926-1993 "Resistance spot welding, projection seam welding and roller seam welding of electrolytically galvanized sheet steel"
• DVS 2926-1984 "Resistance spot welding, projection seam welding and roller seam welding of electrolytically galvanized sheet steel"
• DVS 2925-2005
• DVS 2935-2-2007 Resistance spot welding of sheet metal of low alloyed steels - Cold rolled multiphase steels (AHSS)
• DVS 2923-1986 Resistance point welding of steels and aluminium materials in railway vehicle construction
• DVS 2919-1991 "Resistance spot welding, projection seam welding and roller seam welding of sheet steels and strips with aluminium coatings"
• DVS 2919-1978 "Resistance spot welding, projection seam welding and roller seam welding of sheet steels and strips with aluminium coatings"
• DVS 2920-1978 "Resistance spot welding, projection seam welding and roller seam welding of sheet steels with metallic coatings"
• DVS 2932-1-1985 "Resistance spot welding and resistance roller seam welding of aluminium, and aluminium alloys of an individual thickness of 0.35 to 3.5 mm - weldability"
• DVS 2902-3-1977 Resistance spot welding of steels of an individual thickness of up to 3 mm; design and calculation
• DVS 2902-3-1991 Resistance spot welding of steels of an individual thickness of up to 3 mm; design and calculation
• DVS 2813-2009 Resistance welding of electrical contacts
• DVS 2902-1-1977 Resistance spot welding of steels of an individual thickness of up to 3 mm; methods and fundamentals
• DVS 2902-4-1978 Resistance spot welding of steels of an individual thickness of up to 3 mm; preparation and execution
• DVS 2902-4-2001
• DVS 2920-2000

International Federation of Trucks and Engines, resistance spot welding

• NAVISTAR MPAPS P-9516-2014 Quality Requirements For Resistance Spot Welds
• NAVISTAR MPAPS P-9516-2016 Quality Requirements for Resistance Spot Welds
• NAVISTAR TMS 9516-2014 VOID - Quality Requirements For Resistance Spot Welds

(U.S.) Ford Automotive Standards, resistance spot welding

• FORD FLTM BB 117-01-2014 RESISTANCE SPOT WELDING ACCEPTANCE TEST FOR ALUMINUM
• FORD FLTM BA 013-04-2000 RESISTANCE SPOT WELDABILITY TESTS FOR HIGH STRENGTH STEELS
• FORD FLTM BA 120-01-2021 RESISTANCE SPOT WELDING ACCEPTANCE TEST FOR HETEROGENEOUS STEEL COMBINATIONS
• FORD FLTM BV 062-01-2014 ALUMINUM RESISTANCE SPOT WELDING ACCEPTANCE TEST FOR WELD THROUGH ADHESIVES AND SEALERS
• FORD FLTM BV 061-01-2014 ALUMINUM RESISTANCE SPOT WELDING FLAMMABILITY TEST FOR WELD THROUGH ADHESIVES AND SEALERS

The Aluminum Association, resistance spot welding

• AA T10 Guidelines to Resistance Spot Welding Aluminum Automotive Sheet

Aerospace Industries Association/ANSI Aerospace Standards, resistance spot welding

• AIA/NAS NAS967-2012 RESISTANCE SPOT WELDING EQUIPMENT 3 PHASE Rev 4

AWS - American Welding Society, resistance spot welding

• D8.6-1977 STANDARD FOR AUTOMOTIVE RESISTANCE SPOT WELDING ELECTRODES (SAE HS-J1156)
• D8.1M-2007 Specification for Automotive Weld Quality— Resistance Spot Welding of Steel
• D8.6-2005 Specification for Automotive Resistance Spot Welding Electrodes (Supplement to RWMA Bulletin 16)
• D8.7M-2005 Recommended Practices for Automotive Weld Quality Resistance SpotWelding
• D8.5-1966 Recommended Practices for Automotive Portable-Gun Resistance-Spot Welding
• D8.5 SUPP-1969 Recommended Practices for Automotive Portable-Gun Resistance-Spot Welding
• D8.7-1978 SPECIFICATION FOR AUTOMOTIVE WELD QUALITY - RESISTANCE SPOT WELDING (SAE HS J-1188)
• D8.2M-2017 Specification for Automotive Weld Quality-Resistance Spot Welding of Aluminum (1st Edition)
• D8.1M-2013 Specification for Automotive Weld Quality-Resistance Spot Welding of Steel (2nd Edition)
• D8.7-1988 Recommended Practices for Automotive Weld Quality-Resistance Spot Welding (SAE J 1188)
• D8.9M-2012 Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials (Third Edition)
• D8.9M-2002 Recommended Practices for Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials

PL-PKN, resistance spot welding

• PN-EN ISO 5830-2021-07 E Resistance spot welding -- Male electrode caps (ISO 5830:1984)
• PN-EN ISO 5829-2021-07 E Resistance spot welding -- Electrode adaptors, female taper 1:10 (ISO 5829:1984)

International Truck and Engine Corporation (ITEC), resistance spot welding

• INTERN TMS 9516-2008 Quality Requirements for Resistance Spot Welds in Steel

CZ-CSN, resistance spot welding

• CSN 05 2670-1987 Electrode holders for resistance spot welders. Dimenstons
• CSN 05 2673-1992 Resistance spot welding. Electrode adaptors, male taper 1:10

Professional Standard - Aviation, resistance spot welding

• HB/Z 77-1984 Aluminum alloy resistance spot welding and seam welding process
• HB/Z 238-1993 Resistance Spot Welding and Seam Welding Processes of Superalloys
• HB 5276-1984 Aluminum alloy resistance spot welding and seam welding quality inspection
• HB/Z 145-1989 Titanium and titanium alloy resistance spot welding and seam welding process
• HB 6737-1993 Quality Inspection of Resistance Spot Welding and Seam Welding of Superalloys
• HB/Z 78-1984 Structural steel and stainless steel resistance spot welding and seam welding process
• HB 5427-1989 Quality Inspection of Resistance Spot Welding and Seam Welding of Titanium and Titanium Alloys
• HB 5282-1984 Structural steel and stainless steel resistance spot welding and seam welding quality inspection
• HB 466-1965 Standards for quality inspection and defect repair of resistance spot and seam welding of wrought aluminum alloys

AIA/NAS - Aerospace Industries Association of America Inc., resistance spot welding

• NAS967-2012 RESISTANCE SPOT WELDING EQUIPMENT 3 PHASE (Rev 4)
• NAS967-1975 Resistance Spot Welding Equipment 3 Phase (Rev 3)

Japanese Industrial Standards Committee (JISC), resistance spot welding

• JIS Z 3140:2017 Method of inspection and acceptance levels for resistance spot welds
• JIS Z 3144:1996 Routine test of resistance spot and projection welds
• JIS Z 3144:2013 Routine test of resistance spot and projection welds
• JIS Z 3136:1999 Specimen dimensions and procedure for shear testing resistance spot and embossed projection welded joints
• JIS Z 3139:2009 Methods of macro testing and Vickers hardness testing for section of resistance spot, projection and seam welds
• JIS Z 3137:1999 Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welded joints

Aerospace Industries Association, resistance spot welding

• AIA NAS 967-1975 Resistance Spot Welding Equipment 3 Phase (Rev. 3)

Military Standard of the People's Republic of China-General Armament Department, resistance spot welding

• GJB 724-1989 Stainless steel resistance spot welding and seam welding quality inspection

CEN - European Committee for Standardization, resistance spot welding

• EN 28430-2:1992 Resistance spot welding - Electrode holders - Part 2: Morse taper fixing
• EN ISO 14271:2001 Vickers Hardness Testing of Resistance Spot@ Projection and Seam Welds (Low Load and Microhardness)
• EN ISO 18278-1:2004 Resistance welding - Weldability - Part 1: Assessment of weldability for resistance spot@ seam and projection welding of metallic materials
• EN ISO 14270:2001 Specimen Dimensions and Procedure for Mechanized Peel Testing Resistance Spot@ Seam and Embossed Projection Welds

Group Standards of the People's Republic of China, resistance spot welding

• T/CWAN 80-2023 General technical specifications of resistance spot welding robot system

国家市场监督管理总局、中国国家标准化管理委员会, resistance spot welding

• GB/T 39167-2020 Test method of tensile shear for resistance spot and embossed projection welds
• GB/T 39081-2020 Test method of cross tension test for resistance spot and embossed projection welds
• GB/T 39165-2020 Test method of peel and chisel for resistance spot and projection welds
• GB/T 39166-2020 Test method of mechanized peel for resistance spot, projection and seam welds
• GB/T 39082-2020 Test method of vickers hardness testing for resistance spot,projection and seam welds

American Society for Testing and Materials (ASTM), resistance spot welding

• ASTM E751-01 Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding
• ASTM E751-96 Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding
• ASTM E751-07 Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding
• ASTM E751/E751M-17 Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding
• ASTM E751/E751M-17(2022) Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding
• ASTM E751/E751M-12 Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding

GM Global, resistance spot welding

• GMW 14057-2012 Weld Acceptance Criteria and Repair Procedures Resistance Spot Welds - Steel Issue 4; English
• GMW 16967-2013 Aluminum Resistance Spot Welding Issue 1; English [Replaced: GMNA GMN3904, GMNA GMN3904, GMNA GMN3904]
• GMW 14057-2011 Weld Acceptance Criteria and Repair Procedures Resistance Spot Welds - Steel Issue 3; English

VN-TCVN, resistance spot welding

• TCVN 5875-1995 Radiographic inspection of resistance spot welds for alumium and its alloys.Recommended practice

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, resistance spot welding

• GB/T 25297.2-2010/ISO 5183 2-2000 Electrode fittings for resistance spot welding, external taper 110 - Part 2: Fittings with cylindrical shank for end insertion
• GB/T 25297.2-2010/ISO 5183 2:2000 Electrode fittings for resistance spot welding, external taper 110 - Part 2: Fittings with cylindrical shank for end insertion
• GB/T 25297.2-2010 Resistance spot welding.Electrode adaptors,male taper 1:10.Part 2:Parallel shank fixing for end-thrust electrodes

Professional Standard - Aerospace, resistance spot welding

• QJ 2206-1991 Aluminum alloy resistance point and seam welding process
• QJ 2205-1995 Aluminum alloy resistance spot and seam welding technical conditions
• QJ 2696-1995 Titanium and titanium alloy resistance point, seam welding process
• QJ 2205-1995修改单 Aluminum alloy resistance spot and seam welding technical conditions
• QJ 2205-1995修改单1-1997 Technical specifications for resistance spot / seam welding of aluminum alloy
• QJ 2205-1991 Aluminum alloy resistance spot and seam welding technical conditions
• QJ 1290-1987 Structural steel, stainless steel resistance point, seam welding process

Professional Standard - Nuclear Industry, resistance spot welding

• EJ/T 1167-2004 PWR fuel assembly metallographic examination for resistance spot weld of guide thimble to grid
• EJ/T 1167-2018 Metallographic Examination of Resistance Spot Welding Between Guide Tube and Grid of PWR Fuel Assembly

GM Holden Ltd, resistance spot welding

• HOLDEN HN 2278-2013 Welding Specification - Resistance Welds, Spot Welding and Projection Welding Do Not Use on New Programs, No Replacement

Taiwan Provincial Standard of the People's Republic of China, resistance spot welding

• CNS 5024-1979 Ignitron for Welding Machine

Others:   spot welding rod, resistance spot welding, resistance spot welding, Spot welding tension, Resistance Spot Welding Shear, spot welding fatigue, Resistance spot welding fatigue test, Spot welding tension, Specimen dimensions for resistance spot welding shear tests, spot welding tab, Is there a size for resistance spot welding?, Resistance Spot Welding Specimen, bump welding, Spot Weld Inspection, Resistance spot welding cross tensile test, spot welding, resistance spot welding, spot welding test, resistance spot welding, Resistance spot welding type.