ZH
RU
ES
Principle of spin dryer
Principle of spin dryer, Total:124 items.
In the international standard classification, Principle of spin dryer involves: Rotating machinery, Nuclear energy engineering, Road vehicle systems, Occupational safety. Industrial hygiene, Water quality, Linear and angular measurements, Medical sciences and health care facilities in general, Non-destructive testing, Medical equipment, Electronic tubes, Plastics, Analytical chemistry, Cereals, pulses and derived products, Optical equipment, Optics and optical measurements, Products of the textile industry, Technical drawings, Test conditions and procedures in general, Measurement of volume, mass, density, viscosity, Construction industry, Metalliferous minerals, Environmental testing, Mechanical testing, Lubricants, industrial oils and related products, Particle size analysis. Sieving, Earthworks. Excavations. Foundation construction. Underground works, Hydraulic fluids, Raw materials for rubber and plastics.
Association Francaise de Normalisation, Principle of spin dryer
- NF EN ISO 23131:2022 Ellipsométrie - Principes
- NF EN ISO 3219-2:2021 Rhéologie - Partie 2 : principes généraux de la rhéométrie rotative et oscillatoire
- NF T51-211-2*NF EN ISO 3219-2:2021 Rheology - Part 2 : general principles of rotational and oscillatory rheometry
- NF S10-041*NF ISO 9335:2013 Optics and photonics - Optical transfer function - Principles and procedures of measurementt
- NF B35-300*NF EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
- NF EN ISO 384:2016 Matériels de laboratoire en verre ou en plastique - Principes de conception et de construction d'instruments volumétriques
- NF EN 61947-1:2004 Projection électronique - Mesure et documentation des critères principaux de performance - Partie 1 : projecteurs à résolution fixe
- NF EN 61947-2:2004 Projection électronique - Mesure et documentation des critères principaux de performance - Partie 2 : projecteurs à résolution variable
- NF P94-063:2011 Sols : reconnaissance et essais - Contrôle de la qualité du compactage - Méthode au pénétromètre dynamique à énergie constante - Principe et méthode d'étalonnage des pénétrodensitographes - Exploitation des résultats - Interprétation
- NF E48-658:1990 Hydraulic fluid power. Fluids. Determination of particulate contamination by automatic counting using the light interruption principle.
- NF P94-105:2012 Sols : reconnaissance et essais - Contrôle de la qualité du compactage - Méthode au pénétromètre dynamique à énergie variable - Principe et méthode d'étalonnage du pénétromètre - Exploitation des résultats - Interprétation
- NF EN ISO 3868:1995 Revêtements métalliques et autres revêtements non organiques - Mesurage de l'épaisseur - Méthode basée sur le principe de Fizeau d'interférométrie à faisceaux multiples.
- NF E05-031-604*NF EN ISO 25178-604:2013 Geometrical product specification (GPS) - Surface texture : areal - Part 604 : nominal characteristics of non-contact (coherence scanning interferometry) instruments
German Institute for Standardization, Principle of spin dryer
- DIN EN ISO 23131:2023-01 Ellipsometry - Principles (ISO 23131:2021); German version EN ISO 23131:2022
- DIN EN ISO 23131:2023 Ellipsometry - Principles (ISO 23131:2021)
- DIN 2271-1:1976 Pneumatic Length Measurement (Air Gauging); Principles, Methods
- DIN 19569-10:2017 Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 10: Specific principles for the equipment for thermal sludge drying
- DIN 19569-10:2001 Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 10: Specific principles for the equipment for thermal sludge drying
- DIN 50989-1:2018 Ellipsometry - Part 1: Principles; Text in German and English
- DIN EN ISO 3219-2:2021-08 Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021); German version EN ISO 3219-2:2021
- DIN 12790:1979 Laboratory glassware; hydrometers, principles of construction and adjustment
- DIN ISO 9335:2008 Optics and photonics - Optical transfer function - Principles and procedures of measurement (ISO 9335:1995+Cor. 1:2005);English version of DIN ISO 9335:2008-04
- DIN 19569-10:2017-02 Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 10: Specific principles for the equipment for thermal sludge drying / Note: Applies in conjunction with DIN EN 12255-1 (2002-04), DIN EN 12255-8 (2001-...
- DIN EN ISO 384:2016-05 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015); German version EN ISO 384:2015
- DIN 51350-1:2015-03 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
- DIN EN ISO 25178-604:2013-12 Geometrical product specification (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013); German version EN ISO 25178-604:2013
- DIN ISO 9335:2015 Optics and photonics - Optical transfer function - Principles and procedures of measurement (ISO 9335:2012)
- DIN EN ISO 25178-604:2023-11 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Design and characteristics of non-contact (coherence scanning interferometry) instruments (ISO/DIS 25178-604:2023); German and English version prEN ISO 25178-604:2023 / Note:...
- DIN 51350-1:2010 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
- DIN 51350-1:2015 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
- DIN 51395-1:1999 Testing of metal working fluids - Testing in the VSI foam analyzer - Part 1: General working principles
- DIN 51834-1:2010 Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 1: General working principles
- DIN 51834-1:2004 Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 1: General working principles
- DIN 53019-1:2008 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 1: Principles and measuring geometry
- DIN EN ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021); German version EN ISO 3219-2:2021
- DIN 53019-1:2008-09 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 1: Principles and measuring geometry
- DIN 51819-1:2016 Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 1: General working principles
- DIN 51819-1:1999 Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 1: General working principles
- DIN EN ISO 25178-603:2014-02 Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013); German version EN ISO 25178-603:2013
ES-UNE, Principle of spin dryer
- UNE-EN ISO 23131:2023 Ellipsometry - Principles (ISO 23131:2021)
- UNE-EN ISO 3219-2:2022 Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)
- UNE-EN ISO 25178-604:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013) (Endorsed by AENOR in January of 2015.)
- UNE-EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015)
- UNE-EN ISO 25178-603:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013) (Endorsed by AENOR in January of 2015.)
Indonesia Standards, Principle of spin dryer
- SNI 04-1632-1989 Thermal protection system for rotating electrical machinery, Performance
- SNI 09-0967-1989 Dry type air filters for motor vehicles, Performance test
- SNI 06-6596-2001 Water treatment for metal analysis by atomic absorption spectrophotometers
- SNI 13-4715-1998 Determination of particle size distribution by Warman cyclosizer elustriation methods
Korean Agency for Technology and Standards (KATS), Principle of spin dryer
- KS C IEC 60231:2012 General principles of nuclear reactor instrumentation
- KS C IEC 60231D-2012(2017) Fourth supplement：Principles of instrumentation for pressurized water reactors
- KS C IEC 60231-2012(2022) General principles of nuclear reactor instrumentation
- KS C IEC 60231D-2012(2022) Fourth supplement：Principles of instrumentation for pressurized water reactors
- KS C IEC 60231D:2012 Fourth supplement:Principles of instrumentation for pressurized water reactors
- KS A 4054-2005 Radiographic image quality indicators for non-destructive testing-Principles and identification
- KS B ISO 9335:2011 Optics and optical instruments-Optical transfer function-Principles and procedures of measurement
- KS B ISO 9335-2016(2021) Optics and optical instruments－Optical transfer function－Principles and procedures of measurement
- KS B ISO 9335:2016 Optics and optical instruments－Optical transfer function－Principles and procedures of measurement
- KS C IEC 60231A-2012(2022) General principal of nuclear reactor instrumentation－First supplement to publication 60231(1967)
- KS L ISO 384:2021 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments
- KS M ISO 248-2-2014(2019) Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
SE-SIS, Principle of spin dryer
National Metrological Verification Regulations of the People's Republic of China, Principle of spin dryer
- JJG(煤炭) 5-1988 Verification rules for methane detectors based on the principle of light interference
VN-TCVN, Principle of spin dryer
- TCVN 6164-1996 Principles for the establishment of hierarchy schemes for measuring instruments
Occupational Health Standard of the People's Republic of China, Principle of spin dryer
- GBZ 113-2006 Guidelines on intervention and medical management in the nuclear and radiological accident
British Standards Institution (BSI), Principle of spin dryer
- BS 4877:1972 Recommendations for general principles of nuclear reactor instrumentation
- BS EN ISO 3219-2:2021 Rheology. General principles of rotational and oscillatory rheometry
- BS ISO 9335:1996 Optics and optical instruments - Optical transfer function - Principles and procedures of measurement
- 20/30399870 DC BS EN ISO 3219-2. Rheology. Part 2. General principles of rotational and oscillatory rheometry
- BS EN ISO 25178-604:2013 Geometrical product specifications (GPS). Surface texture: Areal. Nominal characteristics of non-contact (coherence scanning interferometry) instruments
- PD 7974-5:2014+A1:2020 Application of fire safety engineering principles to the design of buildings. Fire and rescue service intervention (Sub system 5)
- BS EN ISO 25178-603:2013 Geometrical product specifications (GPS). Surface texture: Areal. Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
- BS ISO 15529:2010 Optics and photonics. Optical transfer function. Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Principle of spin dryer
- GB 9662-1988 Guideline on intervention levels and medical management in the event of radiological accident
American Society for Testing and Materials (ASTM), Principle of spin dryer
- ASTM E1954-98 Standard Practice for Conduct of Research in Psychophysiological Detection of Deception (Polygraph)
RU-GOST R, Principle of spin dryer
- GOST 21107.0-1975 Gas discharge devices. Methods of measurement of electrical parameters. General principles
- GOST 30157.0-1995 Textile fabrics. Methods of measures changes determination after wet treatments and chemical cleaning. General
- GOST 30546.2-1998 Seismic stability tests for machines, instruments and other industrial products. General guidance and test methods
European Committee for Standardization (CEN), Principle of spin dryer
- EN ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)
International Organization for Standardization (ISO), Principle of spin dryer
- ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry
- ISO 9335:1995 Optics and optical instruments - Optical transfer function - Principles and procedures of measurement
- ISO 9335:2012 Optics and photonics - Optical transfer function - Principles and procedures of measurement
- ISO/CD 25178-604 Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
- ISO 8322-1:1989 Building construction; measuring instruments; procedures for determining accuracy in use; part 1: theory
- ISO/DIS 25178-604:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Design and characteristics of non-contact (coherence scanning interferometry) instruments
- ISO 15529:1999 Optics and optical instruments - Optical transfer function - Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
- ISO 248-2:2019 Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
- ISO/CD 25178-603 Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
- ISO/DIS 25178-603:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Design and characteristics of non-contact (phase shifting interferometry) instruments
中华人民共和国国家卫生和计划生育委员会, Principle of spin dryer
- GBZ 113-2002 Intervention levels and medical treatment principles for ionizing radiation accidents (abolished)
Military Standard of the People's Republic of China-General Armament Department, Principle of spin dryer
- GJB 5958-2007 General specifIcation for the interrupting frequency monitor of battleneld communication frequency management system
BE-NBN, Principle of spin dryer
Danish Standards Foundation, Principle of spin dryer
- DS/ISO 3219-2:2021 Rheology – Part 2: General principles of rotational and oscillatory rheometry
- DS/EN ISO 25178-604:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
- DS/EN ISO 3219-2:2021 Rheology – Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)
IT-UNI, Principle of spin dryer
AT-ON, Principle of spin dryer
- ONORM M 5875-2000 Equipment of municipal sewage treatment plants with in situ measuring instruments for process control
- ONORM E 1008-1987 Graphical symbols jor diagrams; symbols for measuring Instruments, lamps and signalling devices
- ONORM M 5871-1998 Equipment of drinking water treatment plants with in situ measuring instruments
- OENORM EN ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)
Group Standards of the People's Republic of China, Principle of spin dryer
- T/LZLSF 0018-2022 Raw materials of geographical indication Liuzhou Luosifen — Part 2: Liuzhou dried rice noodles
- T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
- T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle
KR-KS, Principle of spin dryer
- KS B ISO 9335-2016 Optics and optical instruments－Optical transfer function－Principles and procedures of measurement
- KS L ISO 384-2021 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments
United States Navy, Principle of spin dryer
- NAVY MS33741 NOTICE 2-1996 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC
- NAVY MS33741 VALID NOTICE 1-1991 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC
- NAVY MS33741-1960 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC
CH-SNV, Principle of spin dryer
- SN EN ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)
Lithuanian Standards Office , Principle of spin dryer
- LST EN ISO 3219-2:2021 Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)
PL-PKN, Principle of spin dryer
CZ-CSN, Principle of spin dryer
- CSN IEC 617-8:1993 Graphical symbols for diagrams. Part 8: Measuring instruments. lamps and signalling devices
National Aeronautics and Space Administration (NASA), Principle of spin dryer
- NASA-CR-4499-1993 Theory for noise of propellers in angular inflow with parametric studies and experimental verification
- NASA NACA-RM-A54H26 REV A-1954 The application of a simplified lifting-surface theory to the prediction of the rolling effectiveness of plain spoiler ailerons at subsonic speeds
American Gas Association, Principle of spin dryer
- AGA TOMS-2003 The Theory and Operations of Meter Shop Sonic Nozzle Proving Systems for the Natural Gas Industry
Professional Standard - Aviation, Principle of spin dryer
- HB 6247.4-1989 Basic product drawing management system (instrument, electrical specialty) Numbering principles for design documents
未注明发布机构, Principle of spin dryer
- ISO 9335:1995/Cor 1:2005 Optical and Optical Instruments Light Transfer Function Measurement Principles and Procedures Technical Corrigendum 1
IN-BIS, Principle of spin dryer
VDI - Verein Deutscher Ingenieure, Principle of spin dryer
- VDI/VDE/DGQ/DKD 2622 BLATT 9.1-2009 Kalibrieren von Messmitteln fuer elektrische Groessen - Pruefgeraete zur Feststellung der elektrischen Sicherheit - Elektrische Geraete nach DIN VDE 0701-0702
- VDI/VDE/DGQ/DKD 2622 BLATT 9.1-2019 Kalibrieren von Messmitteln fuer elektrische Groessen - Pruefgeraete zur Feststellung der elektrischen Sicherheit - Elektrische Geraete nach DIN VDE 0701-0702
International Telecommunication Union (ITU), Principle of spin dryer
- ITU-R 336-2-1970 Principles of the Devices Used to Achieve Privacy in Radiotelephone Conversations - Section 3B - Radiotelephony