ZH
RU
ES

Material specification

Material specification, Total:329 items.

In the international standard classification, Material specification involves: Physics. Chemistry, Electronic components in general, Beverages, Powder metallurgy, Products of non-ferrous metals, Internal combustion engines for road vehicles, Cellular materials, Construction technology, Refractories, Burners. Boilers, Construction materials, Farming and forestry, Magnetic materials, Reinforced plastics, Road engineering, Milk and milk products, Products of the textile industry, Plastics, Protection of and in buildings, Insulating materials, Non-ferrous metals, Technical drawings, Paper and board, Equipment for petroleum and natural gas industries, Metrology and measurement in general, Packaging materials and accessories, Wood-based panels, Rubber and plastics products, Iron and steel products, Electronic component assemblies, Materials for aerospace construction, Agricultural machines, implements and equipment, Heat recovery. Thermal insulation, Components for aerospace construction, Hydraulic construction, Wastes, Bridge construction, Insulating fluids, Electricity. Magnetism. Electrical and magnetic measurements, Inorganic chemicals, Products of the chemical industry, Fertilizers.

International Federation of Trucks and Engines, Material specification

NAVISTAR MPAPS VOID INDEX-2021 Voided Material Specifications
NAVISTAR MPAPS MASTER INDEX-2021 Material Specification Master Index

RU-GOST R, Material specification

GOST R 56551-2015 Nanomanufacturing. Material specifications. Part 2-1. Materials from single-wall carbon nanotubes. Specifications forms
GOST R 51147-1998 Sparkling wine materials. Specifications
GOST 33118-2014 Combined materials on basis of aluminium foil. Specifications
PNST 63-2015 Materials from multiwall carbon nanotubes. Specifications
GOST 5341-2016 Refractories for linings of steel-teeming ladles. Specifications
GOST 5341-1969 Fireclay refractories for linings of steel-teeming ladles. Specifications
GOST R 56775-2015 Microcalcite. for construction materials. Specifications
GOST 29268-1991 Seed potatoes. Normalized initial material. Specifications
PNST 36-2015 Nanomodified thermoplastical carbon composite. Specifications
GOST R 59574-2021 Bulk materials on the basis of the cellula glass. Specifications
GOST R 59653-2021 Planting material of fruit and berry cultures. Specifications
GOST 32922-2014 Pasteurized cow's milk - raw material. Specifications
GOST 32804-2014 Geosynthetic materials for foundations, piers and for use in earth works. General technical requirements
GOST 21.110-2013 System of design documents for construction. Specification of equipment, products and materials
GOST 32683-2014 Edges material based paper impregnated with carbamide-formaldehyde resin. Specifications
GOST R 56946-2016 Petroleum and natural gas industries. Drilling fluid materials. Specifications and tests
GOST R 57413-2017 Combustible natural gas. State reference materials on the basisd magistral gas. Specification
GOST 32716-2014 Facing material based on impregnated papers with a deep degree or resin cure. Specifications
PNST 20-2014 Public roads and highways. Geosynthetic for drainage. Specifications
GOST R 58080-2018 Composition cellulose material for absorbing sanitary-hygiene paper products. Specifications
GOST 26193-1984 Materials from screening after crushing of igneous rocks for construction works. Specifications
GOST R 55923-2013 Facing material based on impregnated papers with a deep degree or resin cure. Specificafications
GOST R 56338-2015 Automobile roads of general use. Geosynthetic for reinforcement of lower base layers of road pavement. Specifications
GOST R 55856-2013 Binding material. General specifications

CZ-CSN, Material specification

CSN 72 2624-1977 Radial bricks. Material specification
CSN 72 2623 Cast.3-1977 Facing bricks - perforated C1D Material specification
CSN 72 2623 Cast.1-1977 Solid facing bricks - C1P Material specification
CSN 64 5402 Z1-1996
CSN 72 2623 Cast.2-1977 Split facing bricks — CIPd Material specification
CSN 72 2623 Cast.4-1977 Shaped facing bricks (CK1). Material specification
CSN 72 2623 Cast.5-1977 Shaped facing bricks JANA (CK1 - JANA) Material speoification
CSN 72 2625 Cast.2-1977 Furring bricks for partition -walls (Pk-dr). Material specification
CSN 72 2625 Cast.1-1977 Cavity bricks for partition walls (Pk-CD). Material specification
CSN 66 6403-1972 Specii of photographic monochrome ne- gative materials for slili photography

BELST, Material specification

STB 2277-2016 Сream-raw materials. Specifications
STB 1520-2008 Materials for horizontal road marking. Specifications
STB 1272-2001 Polymer - cement armored materials. Specifications
STB 1246-2005 Materials heat insulating on base an urealformaldehyde resin. Specifications
STB 1064-97 Floor tiles from thermoplastic material. Composites. Specifications
STB 1580-2005 Slabs concrete composite on flexible ties. Specifications
STB 1378-2008 Sparkling wine materials. Speсifications
STB 1521-2013 Hydraulic binder stabilized materials for road pavements and bases. Specifications
STB 1107-98 Rolled roofing and waterproof materials based on bitumen and bitumen polymer binder. Specifications
STB 1464-2004 Materials for repairing of concrete and reinforced concrete road structures. Specifications
STB 826-2017 Stuffed material. General specifications

European Committee for Standardization (CEN), Material specification

EN ISO 5755:2012 Sintered metal materials - Specifications (ISO 5755:2012)
EN ISO 5755:2022 Sintered metal material - Specifications (ISO 5755:2022)
EN ISO 22068:2013 Sintered-metal injection-moulded materials - Specifications
EN ISO 22068:2014 Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012)
EN 13108-4:2016/AC:2017 Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
EN 17427:2022 Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM)
EN 16223-2:2022 Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM)
EN 17651:2022 Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM)
EN 16223-1:2022 Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM)
EN 13108-31:2019 Bituminous mixtures - Material specifications - Part 31: Asphalt Concrete with Bituminous Emulsion

Association Francaise de Normalisation, Material specification

NF A95-771*NF EN ISO 5755:2012 Sintered metal materials - Specifications.
NF EN ISO 5755:2022 Matériaux métalliques frittés - Spécifications
NF EN 12273:2008 Matériaux bitumineux coulés à froid - Spécifications
FD ISO/TR 17051:2020 Caoutchouc vulcanisé - Lignes directrices pour la spécification des matériaux
NF A95-770*NF EN ISO 22068:2014 Sintered-metal injection-moulded materials - Specifications
NF EN 771-1+A1:2015 Spécifications pour éléments de maçonnerie - Partie 1 : briques de terre cuite
NF EN 771-1/IN1:2015 Spécifications pour éléments de maçonnerie - Partie 1 : briques de terre cuite
NF C26-113-8/A1*NF EN 60371-3-8/A1:2013 Insulating materials based on mica - Part 3 : specifications for individual materials - Sheet 8 : mica paper tapes for flame-resistant security cables
NF C28-901-8-6:2009 Magnetic materials - Part 8-6 : specifications for individual materials - Soft magnetic metallic materials.
NF ISO 6621-3:2002 Moteurs à combustion interne - Segments de piston - Partie 3 : spécifications des matériaux
NF EN ISO 22068:2014 Matériaux métalliques frittés pour moulage par injection - Spécifications
NF C26-144-3/A1*NF EN 60626-3/A1:2013 Combined flexible materials for electrical insulation - Part 3 : specification for individual materials
NF V54-001:2023 Matières protéiques issues des végétaux et des algues et micro-algues - Spécifications
NF EN 13108-4:2016 Mélanges bitumineux - Spécifications des matériaux - Partie 4 : hot Rolled Asphalt (HRA)
NF EN 13108-5:2016 Mélanges bitumineux - Spécifications des matériaux - Partie 5 : stone Mastic Asphalt
NF EN 13108-3:2016 Mélanges bitumineux - Spécifications des matériaux - Partie 3 : enrobés bitumineux mous
NF EN ISO 3262-6:2022 Matières de charge - Spécifications et méthodes d'essai - Partie 6 : Carbonate de calcium précipité
NF C26-113-9/A1*NF EN 60371-3-9/A1:2013 Insulating materials based on mica - Part 3 : specifications for individual materials - Sheet 9 : moulding micanite
NF ISO 3869:2003 Aggloméré composé de liège - Matériau pour le remplissage de joints de dilatation - Spécifications, emballage et marquage
NF M87-300/A1*NF EN ISO 13500/A1:2012 Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests - Amendment 1 : barite 4,1.
NF EN 13121-1:2021 Réservoirs et récipients en PRV pour applications hors sol - Partie 1 : matières premières - Conditions de spécification et critères d'acceptation
NF EN 4717:2022 Série aérospatiale - Polyétheréthercétone avec 55 % de fibre de carbone continue par volume (PEEK-CF55) - Demi-produit - Spécification de matériau
NF EN 4718:2022 Série aérospatiale - Polyétheréthercétone avec 55 % de fibre de verre continue par volume (PEEK-GF55) - Demi-produit - Spécification de matériau
NF EN ISO 3994:2014 Tuyaux en plastiques - Tuyaux thermoplastiques à renforcement thermoplastique en spirale pour aspiration et refoulement de matières aqueuses - Spécifications
NF T25-007*NF ISO 10371:1995 Reinforcement materials. Braided tapes. Basis for a specification.
NF ISO 2113:1997 Renforts - Tissus - Base de spécification
NF EN 60584-1:2014 Couples thermoélectriques - Partie 1 : spécifications et tolérances en matière de FEM
NF C26-163-8*NF EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 8 : resins for cable accessories
NF U44-096*NF EN 14069:2017 Liming materials - Denominations, specifications and labelling

International Organization for Standardization (ISO), Material specification

ISO 5755:2012 Sintered metal materials - Specifications
ISO/TS 20660:2019 Nanotechnologies — Antibacterial silver nanoparticles — Specification of characteristics and measurement methods
ISO 12575-1:2012 Thermal insulation products - Exterior insulating systems for foundations - Part 1: Material specification
ISO 5892:2013 Rubber building gaskets - Materials for preformed solid vulcanized structural gaskets - Specification

German Institute for Standardization, Material specification

DIN EN ISO 5755:2023-02 Sintered metal material - Specifications (ISO 5755:2022); German version EN ISO 5755:2022
DIN EN ISO 22068:2014-06 Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012); German version EN ISO 22068:2014
DIN 30910-4:2010-03 Sintered metal materials - Sintered-material specifications - Part 4: Materials for structural parts
DIN EN 13108-3:2016-12 Bituminous mixtures - Material specifications - Part 3: Soft Asphalt; German version EN 13108-3:2016 / Note: Applies in conjunction with DIN EN 13108-20 (2016-12), DIN EN 13108-21 (2016-12).
DIN EN 60626-3:2013 Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials (IEC 60626-3:2008 + A1:2012); German version EN 60626-3:2008 + A1:2012
DIN EN 13108-8:2016-12 Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt; German version EN 13108-8:2016 / Note: DIN EN 13108-8 (2006-01) remains valid alongside this standard until 2018-03-31.
DIN EN 13108-7:2016-12 Bituminous mixtures - Material specifications - Part 7: Porous Asphalt; German version EN 13108-7:2016 / Note: Applies in conjunction with DIN EN 13108-20 (2016-12), DIN EN 13108-21 (2016-12).
DIN EN 13108-4 Berichtigung 1:2018-05 Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt; German version EN 13108-4:2016, Corrigendum to DIN EN 13108-4:2016-12; German version EN 13108-4:2016/AC:2017
DIN EN 13108-20:2016-12 Bituminous mixtures - Material specifications - Part 20: Type Testing; German version EN 13108-20:2016 / Note: DIN EN 13108-20 (2006-07) and DIN EN 13108-20 Berichtigung 1 (2009-05) remain valid alongside this standard until 2018-03-31.
DIN EN 13108-4:2016-12 Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt; German version EN 13108-4:2016 / Note: Applies in conjunction with DIN EN 13108-20 (2016-12), DIN EN 13108-21 (2016-12).
DIN ISO/TS 12805:2014-08*DIN SPEC 52409:2014-08 Nanotechnologies - Materials specifications - Guidance on specifying nano-objects (ISO/TS 12805:2011)
DIN 30910-1:1990-10 Sintered metal materials; Werkstoff-Leistungsblätter (WLB) sint-material specifications; part 1: explanatory notes for WLB
DIN EN ISO 13500:2011-04 Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:2008 + AMD 1:2010); English version EN ISO 13500:2008 + A1:2010, only on CD-ROM
DIN EN 13108-1:2016-12 Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete; German version EN 13108-1:2016 / Note: Applies in conjunction with DIN EN 13108-20 (2016-12), DIN EN 13108-21 (2016-12).
DIN EN 13108-6:2016-12 Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt; German version EN 13108-6:2016 / Note: Applies in conjunction with DIN EN 13108-20 (2016-12), DIN EN 13108-21 (2016-12).
DIN 30910-2:1990-10 Sintered metal materials; Werkstoff-Leistungsblätter (WLB) sint-material specifications; part 2: materials for filters
DIN EN ISO 5755:2013 Sintered metal materials - Specifications (ISO 5755:2012); German version EN ISO 5755:2012
DIN EN 13108-5:2016-12 Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt; German version EN 13108-5:2016 / Note: Applies in conjunction with DIN EN 13108-20 (2016-12), DIN EN 13108-21 (2016-12).
DIN EN 13108-9:2016-12 Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL); German version EN 13108-9:2016 / Note: Applies in conjunction with DIN EN 13108-20 (2016-12), DIN EN 13108-21 (2016-12).
DIN EN 13108-21:2016-12 Bituminous mixtures - Material specifications - Part 21: Factory Production Control; German version EN 13108-21:2016 / Note: DIN EN 13108-21 (2006-07) and DIN EN 13108-21 Berichtigung 1 (2009-05) remain valid alongside this standard until 2018-03-31.
DIN EN 13108-2:2016-12 Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM); German version EN 13108-2:2016 / Note: Applies in conjunction with DIN EN 13108-20 (2016-12), DIN EN 13108-21 (2016-12).
DIN EN 13108-31:2019-12 Bituminous mixtures - Material specifications - Part 31: Asphalt Concrete with Bituminous Emulsion; German version EN 13108-31:2019
DIN 30910-6:1990-10 Sintered metal materials; Werkstoff-Leistungsblätter (WLB) sint-material specifications; part 6: hot-forged sintered steels for structural parts
DIN EN ISO 22068:2014 Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012); German version EN ISO 22068:2014
DIN EN 4717:2022-06 Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification; German and English version EN 4717:2022
DIN EN 4717:2022 Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification; German and English version EN 4717:2022
DIN EN 4717:2021 Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification; German and English version prEN 4717:2021
DIN EN 4718:2022-06 Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification; German and English version EN 4718:2022
DIN EN 62565-3-1:2014-11 Nanomanufacturing - Material specifications - Part 3-1: Graphene - Blank detail specification for electrotechnical applications (IEC 113/217/CD:2014) / Note: Date of issue 2014-10-17
DIN EN 13121-1:2021-11 GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance criteria; German version EN 13121-1:2021
DIN EN 4718:2022 Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification; German and English version EN 4718:2022
DIN EN 4718:2021 Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification; German and English version prEN 4718:2021
DIN EN 14069:2018 Liming materials - Denominations, specifications and labelling
DIN EN 14069:2018-02 Liming materials - Denominations, specifications and labelling; German version EN 14069:2017

ES-AENOR, Material specification

UNE 56-808-1988
UNE 53-571-1989
UNE 53-491 Pt.1-1991 Plastics. Decorative laminates of polyesters. Specifications
UNE 53-628-1988
UNE 53-567-1989

IN-BIS, Material specification

IS 13584-1993 Brush materials for electrical machinery. Specification

GOSTR, Material specification

GOST R 59097-2020 Materials for additive manufacturing in construction. Specifications
GOST R 58850-2020 Bulk carbon nanostructured material. Specifications
GOST 9996-1984 Binding material on paper base. General specifications
GOST 34470-2018 Castable refractories. General specifications

American Petroleum Institute (API), Material specification

API Spec 10A-2019 Specification for Cements and Materials for Well Cementing (Twenty-Fourth Edition; Effective June 1, 2011)

British Standards Institution (BSI), Material specification

BS ISO 6621-3:2021 Internal combustion engines. Piston rings. Material specifications
BS EN ISO 22068:2014 Sintered-metal injection-moulded materials. Specifications
BS ISO 21844:2018 Cellular plastic. Cellulose foam thermal insulation. Material specification
PD ISO/TR 17051:2020 Rubber, vulcanized. Guidelines for material specification
BS ISO 22068:2012 Sintered-metal injection-moulded materials. Specifications
22/30430487 DC BS EN ISO 5755. Sintered metal materials. Specifications
BS EN ISO 5755:2022 Tracked Changes. Sintered metal material. Specifications
ASME 2B-2021 Section II, Materials - Part B, Nonferrous Material Specifications
ASME 2B-2019 Section II, Materials - Part B, Nonferrous Material Specifications
PD IEC TS 62565-4-1:2019 Nanomanufacturing. Material specifications. Luminescent nanomaterials. Blank detail specification
BS EN 13108-9:2016 Bituminous mixtures. Material specifications. Asphalt for Ultra-Thin Layer (AUTL)
12/30266874 DC BS EN 1871. Road marking materials. Paint, thermoplastic and cold plastic materials. Specifications
BS ISO 12575-1:2012 Thermal insulation. Exterior insulating systems for foundations. Material specification
BS EN 13108-3:2016 Tracked Changes. Bituminous mixtures. Material specifications. Soft Asphalt
DD ISO/TS 12805:2011 Nanotechnologies. Materials specifications. Guidance on specifying nano-objects
BS EN 13108-20:2016 Tracked Changes. Bituminous mixtures. Material specifications. Type Testing
BS EN 13108-7:2016 Tracked Changes. Bituminous mixtures. Material specifications. Porous Asphalt
BS EN 13108-8:2016 Tracked Changes. Bituminous mixtures. Material specifications. Reclaimed asphalt
19/30389128 DC BS ISO 6621-3. Internal combustion engines. Piston rings. Part 3. Material specifications
BS EN 13108-6:2016 Tracked Changes. Bituminous mixtures. Material specifications. Mastic Asphalt
BS EN 13108-5:2016 Tracked Changes. Bituminous mixtures. Material specifications. Stone Mastic Asphalt
BS EN 13108-1:2016 Tracked Changes. Bituminous mixtures. Material specifications. Asphalt Concrete
21/30437969 DC PD 6691. Guidance on the use of BS EN 13108, Bituminous mixtures. Material specifications
BS EN 13108-21:2016 Tracked Changes. Bituminous mixtures. Material specifications. Factory Production Control
BS 3379:2005+A1:2011 Combustion modified flexible polyurethane cellular materials for loadbearing applications. Specification
PD IEC/TS 62565-4-2:2018 Nanomanufacturing. Material specifications. Luminescent nanomaterials. Detail specification for general lighting and display applications
BS EN 60404-8-6:2017 Tracked Changes. Magnetic materials. Specifications for individual materials. Soft magnetic metallic materials
BS EN 60672-3:1998 Ceramic and glass insulating materials. Specifications for individual materials
BS ISO 5892:2013 Rubber building gaskets. Materials for preformed solid vulcanized structural gaskets. Specification
BS EN 13108-2:2016 Tracked Changes. Bituminous mixtures. Material specifications. Asphalt Concrete for Very Thin Layers (BBTM)
BS ISO 4633:2023 Rubber seals. Joint rings for water supply, drainage and sewerage pipelines. Specification for materials
BS EN 4717:2022 Aerospace series. Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55). Stock shape material. Material specification
BS EN 4718:2022 Aerospace series. Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55). Stock shape material. Material specification
21/30432950 DC BS EN 4717. Aerospace series. Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) stock shape material. Material specification
18/30384604 DC BS EN 4718. Aerospace series. Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) stock shape material. Material specification
18/30384546 DC BS EN 4717. Aerospace series. Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) stock shape material. Material specification
23/30459724 DC BS ISO 5892. Rubber building gaskets. Materials for preformed solid vulcanized structural gaskets. Specification
23/30434502 DC BS ISO 6324. Thermal insulation products. Flexible microporous insulation for industrial applications. Specification
22/30434611 DC BS ISO 4633. Rubber seals. Joint rings for water supply, drainage and sewerage pipelines. Specification for materials
21/30432953 DC BS EN 4718. Aerospace series. Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55). Stock shape material. Material specification
BS 3SP 3:1943 Specification for aircraft material - Fork joints (low tensile type) (for sizes No. 4 B.A. to 1/2 inch B.S.F. inclusive)
BS ISO 28078-1:2010 Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials. Designation system and basis for specifications
BS ISO 28078-1:2009 Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Designation system and basis for specifications
22/30455105 DC BS EN IEC 62565-3-1. Nanomanufacturing. Material specifications - Part 3-1. Graphene. Blank detail specification
BS EN IEC 60667-3-1:2020 Vulcanized fibre for electrical purposes - Specifications for individual materials. Sheet 1. Flat sheets
BS PAS 115:2021 Road sweeping and gully waste (non-hazardous). Materials derived for future use in soils or soil amendments. Specification
BS EN 60371-3-3:1995 Specification for insulating materials based on mica. Specifications for individual materials. Specification for rigid mica materials for heating equipment
BS EN 60893-3-1:2012 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Types of industrial rigid laminated sheets
BS EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation. Specifications for individual materials. Sheet 8: Resins for cable accessories
PAS 115:2021 Road sweeping and gully waste (non-hazardous). Materials derived for future use in soils or soil amendments. Specification
19/30388662 DC BS ISO 20819. Plastics. Wood-plastic recycled composites (WPRC). Specification
15/30299199 DC BS EN 62565-3-1. Nanomanufacturing. Material specifications. Part 3-1. Graphene. Blank detail specification for electrotechnical applications
BS EN 60371-3-9:1996 Insulating materials based on mica. Specifications for individual materials. Moulding micanite
BS EN 60674-3-7:1995 Specification for plastic films for electrical purposes - Specifications for individual materials - Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation
BS 8618:2015 Granular carbon dioxide (CO2) absorbent material for life support, diving, hyper- and hypobaric applications. Specification
BS IEC 60404-8-8:2017 Magnetic materials - Specifications for individual materials. Thin electrical steel strip andsheet for use at medium frequencies
BS EN IEC 60404-8-11:2018 Magnetic materials. Specifications for individual materials. Fe-based amorphous strip delivered in the semi-processed state
BS 5626-3.1:1981 Cellulosic papers for electrical purposes. Specifications for individual materials. General purpose paper
BS ISO 20819-1:2020 Tracked Changes. Plastics. Wood-plastic recycled composites (WPRC). Specification
BS EN 14069:2017 Liming materials - Denominations, specifications and labelling
BS EN 60893-3-6:2004+A1:2009 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on silicone resins

Indonesia Standards, Material specification

SNI 4817-2008 Specification for sheet material curing for concrete maintainnace
SNI 07-6658-2002 Material specification of thermal resistance aluminium and aluminium alloy stalks (TAL)
SNI 7413-2008 Drum/rubber roll velg for rice peelers - Materials and dimension
SNI 03-6416.1-2000 Specification for joint materials of concrete dams - Part 1: Selection of waterstop materials
SNI 2496-2008 Specification of additional materials for air bubble formation of concrete

GM North America, Material specification

GM GM501M-2003 Automotive Label Material Specification Selector

ES-UNE, Material specification

UNE-EN ISO 5755:2023 Sintered metal material - Specifications (ISO 5755:2022)
UNE 96002:2023 Sintered metal materials for bearings. Specifications.
UNE 96001:2006 Sintered metal materials for structural use. Specifications.
UNE-EN 13108-3:2007/AC:2008 Bituminous mixtures - Material specifications - Part 3: Soft Asphalt
UNE-EN 13108-20:2007/AC:2009 Bituminous mixtures - Material specifications - Part 20: Type Testing
UNE-EN 13108-4:2007/AC:2008 Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
UNE-EN 13108-8:2018 Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt
UNE-EN 13108-7:2007/AC:2008 Bituminous mixtures - Material specifications - Part 7: Porous Asphalt
UNE-EN ISO 13500:2008/AC:2009 Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:2008/Cor 1:2009) (Endorsed by AENOR in December of 2009.)
UNE-EN 13108-6:2007/AC:2008 Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt
UNE-EN 13108-1:2019 Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete
UNE-EN ISO 13500:2008 Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:2008) (Endorsed by AENOR in December of 2008.)
UNE-EN 13108-9:2018 Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL)
UNE-EN 13108-21:2007/AC:2009 Bituminous mixtures - Material specifications - Part 21: Factory Production Control
UNE-EN 13108-5:2007/AC:2008 Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt
UNE-EN 13108-2:2007/AC:2008 Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers
UNE-EN 4717:2022 Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification (Endorsed by Asociación Española de Normalización in May of 2022.)
UNE-EN 4718:2022 Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification (Endorsed by Asociación Española de Normalización in May of 2022.)
UNE-EN ISO 13500:2008/A1:2010 Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests - Amendment 1: Barite 4,1 (ISO 13500:2008/AMD 1:2010) (Endorsed by AENOR in January of 2011.)
UNE-EN 13121-1:2022 GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance criteria
UNE-EN 14069:2018 Liming materials - Denominations, specifications and labelling

SE-SIS, Material specification

SIS SS IEC 672:1988 Insulating materials — Specification for ceramic and glass insulating materials
SIS SS IEC 626:1983 Specrfications for combined flexible materials for electrical insulation

American Society for Testing and Materials (ASTM), Material specification

ASTM B848-10 Specification for Powder Forged (P/F) Ferrous Materials
ASTM D4349-10 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials
ASTM F99-07(2015) Standard Guide for Writing a Specification for Flexible Barrier Rollstock Materials
ASTM D5336-15 Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials
ASTM D709-13 Standard Specification for Laminated Thermosetting Materials
ASTM D709-17 Standard Specification for Laminated Thermosetting Materials
ASTM D5927-14 Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
ASTM B631-93(2010) Standard Specification for Silver-Tungsten Electrical Contact Materials
ASTM B702-93(2010) Standard Specification for Copper-Tungsten Electrical Contact Material
ASTM B684-97(2012) Standard Specification for Platinum-Iridium Electrical Contact Materials
ASTM B683-01(2012) Standard Specification for Pure Palladium Electrical Contact Material
ASTM B685-01(2012) Standard Specification for Palladium-Copper Electrical Contact Material
ASTM B662-94(2012) Standard Specification for Silver-Molybdenum Electrical Contact Material
ASTM B693-91(2012) Standard Specification for Silver-Nickel Electrical Contact Materials

American National Standards Institute （ANSI), Material specification

ASME NM.3.1-2022 Nonmetallic Materials Part 1 - Thermoplastic Material Specifications
ASME NM.3.2-2022 Nonmetallic Materials Part 2 - Reinforced Thermoset Plastic Material Specifications

VN-TCVN, Material specification

TCVN 5735-3-2009 Internal combustion engines.Piston rings.Part 3: Material specifications

AENOR, Material specification

UNE 26417-3:1992 INTERNAL COMBUSTION ENGINES. PISTON RINGS. PART 3: MATERIAL SPECIFICATIONS.
UNE 104309-2:2004 Waterproofing. Part 2: Liquid materials for dams paraments. Specifications, test methods and application.
UNE 21373-3-1:1992 SPECIFICATION FOR VULCANIZED FIBRE FOR ELECTRICAL PURPOSES. SPECIFICATIONS FOR INDIVIDUAL MATERIALS. FLAT SHEETS.
UNE-EN 60672-3:1999 CERAMIC AND GLASS-INSULATING MATERIALS. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS.
UNE 104309-3:2004 Waterproofing. Part 3: Liquid materials for tanks used in hydraulic works. Specifications, test methods and application.
UNE 104309-1:2004 Waterproofing. Part 1: Liquid materials for water conveyers used in hydraulic works. Specifications, test methods and application.

Korean Agency for Technology and Standards (KATS), Material specification

KS R ISO 6621-3:2019 Internal combustion engines — Piston rings — Part 3: Material specifications
KS C IEC 60404-8-1:2018 Magnetic materials — Part 8-1: Specifications for individual materials — Magnetically hard materials
KS M ISO 4633:2018 Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
KS M ISO 5892:2018 Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification
KS C IEC 60674-3-3-2014(2019) Specification for plastic films for electrical purposes — Part 3: Specifications for individual materials — Sheet 3: Requirements for polycarbonate(PC) films used for electrical insulation
KS C IEC 60674-3-4-2014(2019) Specification for plastic films for electrical purposes — Part 3: Specifications for individual materials — Sheets 4 to 6: Requirements for polyimide films used for electrical insulation
KS C IEC 60371-3-6-2014(2019) Specification for insulating materials based on mica — Part 3: Specifications for individual materials — Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder

KR-KS, Material specification

KS R ISO 6621-3-2019 Internal combustion engines — Piston rings — Part 3: Material specifications
KS C IEC 60404-8-1-2018 Magnetic materials — Part 8-1: Specifications for individual materials — Magnetically hard materials
KS M ISO 4633-2018 Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
KS M ISO 5892-2018 Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification
KS C IEC 60672-3-2017 Ceramic and glass-insulating materials — Part 3: Specifications for individual materials

PL-PKN, Material specification

PN C99475-1970 Methods for determination of di- mensions of light somsitive photo- graphic materiales
PN BN 7442-06-1965 Composing materia? Testing of dimensions

American Railway Engineering and Maintenance-of-Way Association (AREMA), Material specification

AREMA CH 7-1-1988 Material Specifications for Lumber@ Piles@ Glued Laminated Timber and Fasteners

International Electrotechnical Commission (IEC), Material specification

IEC 60626-3:1988 Specification for combined flexible materials for electrical insulation. Part 3: Specifications for individual materials
IEC 60626-3:2012 Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials
IEC 60404-8-4:2013 Magnetic materials.Part 8-4: Specifications for individual materials.Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state
IEC 60674-3-4:1993 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4 to 6: Requirements for polyimide films used for electrical insulation
IEC 60404-8-7:2008 Magnetic materials - Part 8-7: Specification of individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully-processed state
IEC 60404-8-7:2017 Magnetic materials - Part 8-7: Specifications for individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully-processed state
IEC 60626-3:2008+AMD1:2012 CSV Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials
IEC 60455-3-8:2013 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories

RO-ASRO, Material specification

STAS SR ISO 6621-3:1996 Internai combustion engines - Piston rings -Part 3 : Material specifications
STAS 10624-1988 Electric welding by pressure SPECIFICATIONS FOR MATERIALS USED FOR CONTACT ELECTRODS AND ANCILLARY EQUIPMENTS
STAS SR CEI 464-3-1-1995 Specification for insulating varnishes containing solvent. Part. 3: Specifications for individual materials. Sheet 1: Requirements for cold curing finishing varnishes
STAS SR CEI 464-3-2-1995 Specification for insulating varnishes containing solvent. Part 3: Specifications for individual materials. Sheet 2: Requirements for hot curing impregnating varnishes

ISUZU - Isuzu Motors Ltd., Material specification

INDEX-2000 Total Index of Material Specifications and Test Methods (Japanese/English Version)
INDEX VOLUME 5-2001 Material Specifications and Test Methods - Plastics and Rubbers (Japanese/English Version)
INDEX VOLUME 1-2000 Material Specifications and Test Methods - Volume 1 Metals (Japanese/English Version)
INDEX VOLUME 1-2001 Material Specifications and Test Methods - Volume 1 Metals (Japanese/English Version)
INDEX VOLUME 6-2003 Material Specifications and Test Methods - Volume 6 Miscellaneous (Japanese/English Version)
INDEX VOLUME 2-2000 Material Specifications and Test Methods - Volume 2 Adhesives@ Sealers (Japanese/English Version)
INDEX VOLUME 6-2002 Material Specifications and Test Methods - Volume 6 Miscellaneous (Japanese/English Version)
INDEX VOLUME 3-2002 Material Specifications and Test Methods - Volume 3 Coatings (Japanese/English Version)
INDEX VOLUME 2-2002 Material Specifications and Test Methods - Volume 2 Adhesives@ Sealers (Japanese/English Version)
INDEX VOLUME 1-2002 Material Specifications and Test Methods - Volume 1 Metals (Japanese/English Version)
INDEX VOLUME 6-2004 Material Specifications and Test Methods - Volume 6 Miscellaneous (Japanese/English Version)
INDEX VOLUME 6-2000 Material Specifications and Test Methods - Volume 6 Miscellaneous (Japanese/English Version)
INDEX VOLUME 2-2005 Material Specifications and Test Methods - Volume 2 Adhesive@ Sealer (Japanese/English Version)
INDEX VOLUME 1-2008 Material Specifications and Test Methods - Volume 1 Metals (Japanese/English Version)
INDEX VOLUME 3-2000 Material Specifications and Test Methods - Volume 3 Coatings (Japanese/English Version)
INDEX VOLUME 2-2001 Material Specifications and Test Methods - Volume 2 Adhesives@ Sealers (Japanese/English Version)
INDEX VOLUME 6-2001 Material Specifications and Test Methods - Volume 6 Miscellaneous (Japanese/English Version)
INDEX VOLUME 3-2001 Material Specifications and Test Methods - Volume 3 Coatings (Japanese/English Version)
INDEX VOLUME 2-2003 Material Specifications and Test Methods - Volume 2 Adhesives@ Sealers (Japanese/English Version)
INDEX VOLUME 5-2000 Material Specifications and Test Methods - Volume 5 Plastics@ Rubber (Japanese/English Version)
INDEX VOLUME 4-2001 Material Specifications and Test Methods - Volume 4 Fuels@ Lubes@ Coolants (Japenese/English Version)
INDEX VOLUME 4-2002 Material Specifications and Test Methods - Volume 4 Fuels@ Lubes@ & Coolants (Japenese/English Version)
INDEX VOLUME 4-2000 Material Specifications and Test Methods - Volume 4 Fuels@ Lubes@ & Coolants (Japenese/English Version)
INDEX VOLUME 5-2003 Material Specifications and Test Methods - Volume 5 Plastics and Rubber (Japanese/English Version)
INDEX VOLUME 5-2004 Material Specifications and Test Methods - Volume 5 Plastics and Rubbers (Japanese/English Version)
INDEX VOLUME 5-2002 Material Specifications and Test Methods - Volume 5 Plastics and Rubber (Japanese/English Version)
INDEX VOLUME 4-2004 Material Specifications and Test Methods - Volume 4 Fuels@ Lubes@ and Coolants (Japenese/English Version)
INDEX VOLUME 4-2003 Material Specifications and Test Methods - Volume 4 Fuels@ Lubes@ and Coolants (Japenese/English Version)

Society of Automotive Engineers (SAE), Material specification

SAE TS260-5-2014 TS260 Metallic Materials List of Alternative Material Specifications and Standards Only Authorised for Use on Standard Parts
SAE AMS INDEX-2003 AEROSPACE MATERIAL SPECIFICATIONS INDEX ISSUED SEMI-ANNUALLY (JANUARY & JULY)
SAE TS260-6-2020 TS260-6 Metallic Materials List of Alternative Material Specifications and Standards Only Authorised for Use on SAE ITC Standard Parts

American Society of Mechanical Engineers (ASME), Material specification

ASME BPVC Section 2 Part A-2013 ASME Boiler & Pressure Vessel Code - Section 2: Materials - Part A: Ferrous Material Specifications (two volumes)
ASME BPVC Section 2 Part B-2013 ASME Boiler & Pressure Vessel Code - Section 2: Materials - Part B: Nonferrous Material Specifications

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Material specification

PREN 4718-2019 Aerospace series Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) Stock shape material Material specification (Edition P 3)
PREN 4717-2019 Aerospace series Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) Stock shape material Material specification (Edition P 3)

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Material specification

IPC 4821-2006 Specification for Embedded Passive Device Capacitor Materials for Rigid and Multilayer Printed Boards
IPC IPC/JPCA-4104-1999 Specification for High Density Interconnect (HDI) and Microvia Materials

SAE - SAE International, Material specification

SAE AMS INDEX-2006 AEROSPACE MATERIAL SPECIFICATIONS INDEX (ISSUED SEMI-ANNUALLY (JANUARY & JULY))
SAE AMS INDEX-2008 AEROSPACE MATERIAL SPECIFICATIONS INDEX (ISSUED SEMI-ANNUALLY (JANUARY & JULY))
SAE AMS INDEX-2007 AEROSPACE MATERIAL SPECIFICATIONS INDEX (ISSUED SEMI-ANNUALLY (JANUARY & JULY))

Professional Standard - Ferrous Metallurgy, Material specification

YB/T 4176-2008 Torsion test method for large gauge wire rods of metallic materials

YU-JUS, Material specification

JUS C.N2.002-1986 Powder metallurgy. Sintered metal materials. Specifications — Materials, for bearings, impregnated with liquid lubricant

The Society for Protective Coatings (SSPC), Material specification

SSPC PS 27.00-2000 Alkyd Coating System Materials Specification, Performance-Based (Editorial Revisions November 1, 2004)

Underwriter Laboratories of Canada (ULC), Material specification

CAN/ULC-S743.1-2020 STANDARD FOR THERMAL INSULATION - LOW PRESSURE APPLIED TWO COMPONENT SPRAY POLYURETHANE FOAM, PART 1: MATERIAL SPECIFICATION

Japanese Industrial Standards Committee (JISC), Material specification

JIS C 2323-3-3:2015 Non-cellulosic papers for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 3: Aramid papers

ZA-SANS, Material specification

SANS 6446:2005 Rubber products - Bridge bearings - Specification for rubber materials

BE-NBN, Material specification

NBN S 22-010-1985 Textile glass - Woven fabrics - Basis for specification

AREMA - American Railway Engineering and Maintenance-of-Way Association, Material specification

RAILWAY ENG MAN VOL 2 CH 7 PT 1-2006 MANUAL FOR RAILWAY ENGINEERING - VOLUME 2 - CHAPTER 7 - PART 1 - MATERIAL SPECIFICATIONS FOR LUMBER@ PILES@ GLUED LAMINATED TIMBER AND FASTENERS
RAILWAY ENG MAN VOL 2 CH 7 PT 1-2005 MANUAL FOR RAILWAY ENGINEERING - VOLUME 2 - CHAPTER 7 - PART 1 - MATERIAL SPECIFICATIONS FOR LUMBER@ PILES@ GLUED LAMINATED TIMBER AND FASTENERS
RAILWAY ENG MAN VOL 2 CH 7 PT 1-2003 MANUAL FOR RAILWAY ENGINEERING - VOLUME 2 - CHAPTER 7 - PART 1 - MATERIAL SPECIFICATIONS FOR LUMBER@ PILES@ GLUED LAMINATED TIMBER AND FASTENERS
RAILWAY ENG MAN VOL 2 CH 7 PT 1-2004 MANUAL FOR RAILWAY ENGINEERING - VOLUME 2 - CHAPTER 7 - PART 1 - MATERIAL SPECIFICATIONS FOR LUMBER@ PILES@ GLUED LAMINATED TIMBER AND FASTENERS

Lithuanian Standards Office , Material specification

LST EN ISO 13500:2009/A1:2011 Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests - Amendment 1: Barite 4,1 (ISO 13500:2008/Amd.1:2010)

GM Daewoo, Material specification

GMKOREA EDS-M-7202-2015

SSPC - The Society for Protective Coatings, Material specification

PS 26.00-2000 Aluminum Pigmented Epoxy Coating System Materials Specification@ Performance-Based Type I@ for Use Over Blast Cleaned Steel Type II@ for Use Over Hand Cleaned Steel