ZH
RU
ES

sae j 2005

sae j 2005, Total:148 items.

In the international standard classification, sae j 2005 involves: Small craft, Acoustics and acoustic measurements, Fluid power systems, Shipbuilding and marine structures in general, Galvanic cells and batteries, Electric road vehicles, Road vehicle systems, Aerospace engines and propulsion systems, Internal combustion engines for road vehicles, Measurement of time, velocity, acceleration, angular velocity, Reinforced plastics, Electrical wires and cables, Seals, glands, Iron and steel products, Motor cycles and mopeds, Surface treatment and coating, Ferrous metals, Fasteners, Commercial vehicles, Tyres, Fuel cells, Road vehicles in general, Information sciences. Publishing, Diagnostic, maintenance and test equipment, Character sets and information coding, Lubricants, industrial oils and related products, Plastics, Valves, Materials for aerospace construction.

Society of Automotive Engineers (SAE), sae j 2005

SAE J2005-2004 Stationary Sound Level Measurement Procedure for Recreational Motorboats
SAE J2005-2011 Stationary Sound Level Measurement Procedure for Recreational Motorboats
SAE J2005-1991 Stationary Sound Level Measurement Procedure for Pleasure Motorboats, Recommended Practice December 1991
SAE J1776-2005 Marine Vehicles-Hydraulic Pumps-Design and Specification Guide
SAE J1766-2005 Recommended Practice for Electric and Hybrid Electric Vehicle Battery Systems Crash Integrity Testing
SAE J182-2005 Motor Vehicle Fiducial Marks and Three Dimensional Reference System
SAE J1787-2005 Measurement of the Total Ash Content of Aviation Piston Engine Oils by a Calculation Method
SAE J1899-2005 Lubricating Oil, Aircraft Piston Engine (Ashless Dispersant)
SAE J1532-2005 Transmission Oil Cooler Hose
SAE J1495-2005 Test Procedure for Battery Flame Retardant Venting Systems
SAE J1545-2005 Instrumental Color Difference Measurement for Exterior finishes, Textiles, and Colored Trim
SAE J1684-2005 Test Method for Evaluating the Electrochemical Resistance of Coolant System Hoses and Materials
SAE J1621-2005 Engine Retarder Dynamometer Test and Capability Rating procedure
SAE J1352-2005 Compression and Recovery of Insulation Paddings
SAE J1319-2005 Fog Tail Lamp (Rear Fog Light) Systems
SAE J1403-2005 Vacuum Brake Hose
SAE J1288-2005 Packaging, Storage, and Shelf Life of Hydraulic Brake Hose Assemblies
SAE J1405-2005 Optional Impulse Test Procedures for Hydraulic Hose Assemblies
SAE J100-2005 Class A Vehicle Glazing Shade Bands
SAE J119-2005 Fiberboard Crease Bending Test
SAE J1191-2005 High Tension Ignition Cable Assemblies Marine
SAE J1128-2005 Low Voltage Primary Cable
SAE J1127-2005 Low Voltage Battery Cable
SAE J1966-2005 Lubricating Oils, Aircraft Piston Engine (Nondispersant Mineral Oil)
SAE J2009-2005 Discharge Forward Lighting System and Subsystems
SAE J2028-2005 Front-Wheel-Drive Constant Velocity Joint Boot Seals
SAE J1993-2005 High-Carbon Cast-Steel Grit
SAE J47-2005 Maximum Sound Level Potential for Motorcycles
SAE J402-2005 New Steel Designation System for Wrought or Rolled Steel
SAE J444-2005 Cast Shot and Grit Size Specifications for Peening and cleaning
SAE J492-2005 Guide for Rivet Selection and Design Consideration
SAE J516-2005 Hydraulic Hose Fittings
SAE J96-2005 Flashing Warning Lamp for Industrial Equipment
SAE J651-2005 Passenger Car and Light Truck Automatic Transmission and Automatic Transaxle Test Code
SAE J592-2005 Sidemarker Lamps for Use on Road Vehicles Less Than 2032 mm in Overall Width
SAE J583-2005 Front Fog Lamps
SAE J593-2005 Backup Lamp (Reversing Lamp)
SAE J673-2005 Automotive Safety Glasses
SAE J827-2005 High-Carbon Cast-Steel-Shot
SAE J2707-2005 Wear Test Procedure on Inertia Dynamometer for Brake Friction Materials
SAE J2710-2005 Modal Testing and Identification of Lower Order Tire Natural Frequencies of Radial Tires
SAE J2740-2005 General Motors UART Serial Data Communications
SAE J2719-2005 Information Report on the Development of a Hydrogen Quality Guideline for Fuel Cell Vehicles
SAE J2376-2005 New-Vehicle Collision Repair Information
SAE J2450-2005 Translation Quality Metric
SAE J2301-2005 Universal Joint End Yoke Connection (Earwork)
SAE J328-2005 Wheels Passenger Cars and Light Truck Performance Requirements and Test Procedures
SAE J306-2005 Automotive Gear Lubricant Viscosity Classification
SAE J310-2005 Automotive Lubricating Greases
SAE J2615-2005 Testing Performance of Fuel Cell Systems for Automotive Applications
SAE J2704-2005 Tire Normal Force/Deflection and Gross Footprint Dimension Test
SAE J2650-2005 Performance Requirements for Light Emitting Diode (LED) Road Illumination Device Systems
SAE J2566-2005 Personal Watercraft Display of Persons Capacity Information
SAE J2695-2005 Heavy Duty Vehicle Lubricating Greases
SAE J2587-2005 Optimized Fuel Tank Sender Closure
SAE J2558-2005 Classification Systems for Thermoplastic Elastomers
SAE J2051-2005 Qualifications for Four-Way Subbase Mounted Air Valves for automotive manufacturing Applications
SAE J2139-2005 Test for signal and Marking Devices Used on Vehicles 2032 mm or more in Overall Width
SAE J2140-2005 General Requirement for Preformed Hoses for Air Induction on Heavy-Duty Engines
SAE J2064-2005 R134a Refrigerant Automotive Air-Conditioning Hose
SAE J2052-2005 Test Device Head Contact Duration Analysis
SAE J1885-2005 Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus
SAE J2683-2005 Refrigerant Purity and Container Requirement for Carbon Dioxide (CO<(Index)2> R-744) Used in Mobile Air-Conditioning Systems
SAE J445-2005 Metallic Shot and Grit Mechanical Testing
SAE J2556-2005 Radiated Emissions (RE) Narrowband Data Analysis—Power Spectral Density (PSD)
SAE J2186-2005 E/E Data Link Security
SAE J1574-1-2005 Measurement of Vehicle and Suspension Parameters for Directional Control Studies
SAE J1574-2-2005 Measurement of Vehicle and Suspension Parameters for Directional Control Studies--Rationale
SAE AMS4127J-2005 Aluminum Alloy, Forgings and Rolled or Forged Rings (6061-T6) Solution and Precipitation Heat Treated UNS A96061
SAE AMS5044J-2005 Steel, Sheet and Strip 0.15 Carbon, Maximum Half Hard Temper UNS G10100
SAE AMS4006J-2005 Aluminum Alloy, Sheet and Plate, 1.25Mn 0.12Cu (3003-0), Annealed
SAE AMS3270J-2005 Chloroprene (CR) Rubber Sheet, Cotton Fabric Reinforced Weather Resistant
SAE J2450-1-2019 SAE J 2450 Supplemental Training Document
SAE J2450-1-2008 SAE J 2450 Supplemental Training Document

SAE - SAE International, sae j 2005

SAE J2005-2018 Stationary Sound Level Measurement Procedure for Recreational Motorboats
SAE J1939-2005 Recommended Practice for a Serial Control and Communications Vehicle Network
SAE J1698-2005 Event Data Recorder
SAE J1742-2005 Connections for High Voltage On-Board Vehicle Electrical Wiring Harnesses - Test Methods and General Performance Requirements
SAE J1100-2005 Motor Vehicle Dimensions
SAE J2670-2005 Stability and Compatibility Criteria for Additives and Flushing Materials Intended for Use in Vehicle Air-Conditioning Systems Using R-134a
SAE J2738-2005 Improved Roadway Illumination: Information Resource
SAE J2705-2005 Tire Quasi-Static Envelopment of Triangular/Step Cleats Test
SAE J2312-2005 Automatic Transmission Intake Filter Test Procedure
SAE J2475-2005 Wheel End Assembly and Axle Spindle Interface Dimensions - Truck and Bus
SAE J2727-2005 Mobile Air Conditioning System Leakage Chart
SAE J2616-2005 Testing Performance of the Fuel Processor Subsystem of an Automotive Fuel Cell System
SAE J2283-2005 Mechanical and Material Requirements for One Piece Wheel Nuts
SAE J2414-2005 Application Testing of Oil-to-Water Oil Coolers for Heat Transfer Performance
SAE J2577-2005 Heavy Duty Lamp Electrical Connector Standard
SAE J2651-2005 Jump Start Connections for 42 Volt Electrical Systems
SAE J2580-2005 Identification and Installation of Air Brake System Components
SAE J1499-2005 SAE Band Friction Test Machine Guidelines
SAE J286-2005 SAE No. 2 Clutch Friction Test Machine Guidelines
SAE J1114-2005 Fuel Tank Filler Cap and Cap Retainer Threaded
SAE J1383-2005 Performance Requirements for Replacement Bulb Motor Vehicle Headlamps
SAE J2192-2005 Recommended Testing Methods for Physical Protection of Wiring Harnesses
SAE J2111-2005 Headlamp Cleaners
SAE J1981-2005 Road Hazard Impact Test for Wheel and Tire Assemblies (Passenger Car@ Light Truck@ and Multipurpose Vehicles)
SAE J164-2005 Radiator Caps and Filler Necks
SAE J1670-2005 "Type ""F"" Clamps for Plumbing Applications"
SAE J1097-2005 Hydraulic Excavator Lift Capacity Calculation and Test Procedure (Reissued)
SAE J1884-2005 Vehicle Jack Requirements and Test Procedure
SAE J1825-2005 Shelf Storage of Hydraulic Brake Components
SAE J1498-2005 Heating Value of Fuels
SAE J1889-2005 L.E.D. Signal and Marking Lighting Devices
SAE J1796-2005 Spectral Transmission Test
SAE J1685-2005 Classification System for Automotive Acrylonitrile/Butadiene/Styrene (ABS) and ABS + Polycarbonate Blends (ABS+PC) Based Plastics
SAE J1928-2005 Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications
SAE J2363-2005 Lubricating Oil for Wheeled Military Vehicles with Heavy-Duty Diesel Engines
SAE J2134-2005 Luminous Reflectance in Safety Glazing Materials for Road vehicles
SAE J4002-2005 (R) H-Point Machine and Design Tool Procedures and Specifications
SAE J2628-2005 Characterization, Conducted Immunity
SAE J639-2005 Safety and Containment of Refrigerant for Mechanical Vapor Compression Systems Used for Mobile Air-Conditioning Systems
SAE J398-2005 Fuel Tank Filler Conditions - Passenger Car, Multipurpose Passenger Vehicles, and Light Duty Trucks
SAE J595-2005 Flashing Warning Lamps for Authorized Emergency, Maintenance and Service Vehicles
SAE J2362-2005 Lubricating Oil, Automotive Engine, API Service SJ for Military Administrative Service
SAE J4004-2005 Positioning the H-Point Design Tool Seating Reference Point and Seat Track Length
SAE J4003-2005 H-Point Machine (HPM-II)Procedure for H-Point DeterminationBenchmarking Vehicle Seats
SAE J933-2005 Mechanical and Quality Requirements for Tapping Screws
SAE J577-2005 Vibration Test Machine and Operation Procedure
SAE J829-2005 Fuel Tank Filler Cap and Cap Retainer
SAE J34-2005 Exterior Sound Level Measurement Procedure for Pleasure Motorboats
SAE J200-2005 Classification System for Rubber Materials (Replaces SAE J14/ASTM D 735)
SAE J684-2005 Trailer Couplings@ Hitches@ and Safety Chains-Automotive Type
SAE J156-2005 Fusible Links
SAE J1402-2005 AIR BRAKE HOSE
SAE J674-2005 SAFETY GLAZING MATERIALS—MOTOR VEHICLES
SAE J2723-2005 Engine Power Test CodeEngine Power and Torque Certification
SAE J2562-2005 Biaxial Wheel Fatigue Test
SAE J562-2005 Nonmetallic Loom
SAE J19-2005 Latex-Dipped Goods and Coatings for Automotive Applications
SAE J582-2005 Auxiliary Low Beam Lamps
SAE J756-2005 Marine Propeller-Shaft Couplings
SAE J654-2002
SAE J654-1993
SAE J3046-1-2005 Reciprocating Internal Combustion Engines—Performance—Part 1: Standard Reference Conditions@ Declarations of Power@ Fuel and Lubricating Oil Consumptions@ and Test Methods
SAE J1113-21-2005 Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 21: Immunity to Electromagnetic Fields@ 10 kHz to 18 GHz@ Absorber-Lined Chamber
SAE J1113-27-2005 Electromagnetic Compatibility Measurements Procedure for Vehicle Components - Part 27 - Immunity to Radiated Electromagnetic Fields@ Recommended Practice
SAE J2223-2-2005 Connections for On-Board Road Vehicle Electrical Wiring HarnessesPart 2: Tests and General Performance Requirements
SAE AMS6448J-2005 Steel@ Bars@ Forgings@ and Tubing 0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150) (UNS G61500)
SAE J2602-1-2005 LIN Network for Vehicle Applications
SAE J2602-2-2005 LIN Network for Vehicle Applications Conformance Test
SAE AMS4212J-2005 CAST ALUMINUM ALLOY 5% Silicon (Solution and Precipitation)
SAE J551-16-2005 Electromagnetic ImmunityOff-Vehicle Source (Reverberation Chamber Method) Part 16Immunity to Radiated Electromagnetic Fields
SAE J1698-1-2005 Vehicle Event Data InterfaceOutput Data Definition
SAE J2223-1-2005 Connections for On-Board Road Vehicle Electrical Wiring Harnesses Part 1: Single-Pole ConnectorsFlat Blade Terminals Dimensional Characteristics and Specific Requirements
SAE J1942-1-2005 Qualified Hoses for Marine Applications
SAE J1113-25-2005 Electromagnetic Compatibility Measurement Procedure for Vehicle Components-Immunity to Radiated Electromagnetic Fields@ 10 KHz to 1000 MHz-Tri-Plate Line Method