T05 专用材料及其制品 标准查询与下载

SAE J1887-2007 汽车的蠕墨铸件

This SAE Standard covers the mechanical and physical requirements for compacted graphite iron (CGI) castings used in automotive and allied industries. Requirements in this document include: a. tensile strength; b. yield strength; c. elongation; and d. graphite morphology. Appendix A provides general information on application of this material along with additional data on mechanical and physical properties not specified but useful as a design reference. Appendix B provides a compacted graphite iron percent nodularity rating chart not specified but useful as a visual reference.

Automotive Compacted Graphite Iron Castings

SAE J1717-2007 汽车内部塑料部件测试

SAE J1717 is an advisory document suggesting minimum recommended testing, appearance evaluation, and protocol for specifying the recommendations with regard to Singular Unassembled Automotive interior trim Parts. The purpose of this SAE Recommended Practice is to: a. standardize the testing and appearance evaluation requirements for interior unassembled plastic parts for the automotive industry; b. standardize the associated test and appearance evaluation methods; and c. Provide a method for specifying these requirements by the use of a simple line call-out designation.

Interior Automotive Plastic Part Testing

SAE J912-2007 汽车装饰材料的抗粘连性及其相关特性的测定用试验方法

This test method is designed to indicate the degree of surface tackiness, color transfer, loss of embossment, and surface marring when two trim materials are placed face to face under specific conditions of time, temperature, and pressure. These specific conditions are not dictated in this test procedure but will be found in the material standards which govern each type of trim material to be tested.

Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials

SAE J369-2007 聚合物的内部材料易燃性的水平试验方法

This SAE Standard pertains to automotive vehicles and off-road, self- propelled work machines used in construction, general purpose industrial, agriculture, forestry, and specialized mining machinery. This standard does not address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of ths document to establish safety and health practies and determine the applicability of regularoty limitations prior to use. This test method is intended for burning rate measurement of polymeric materials used in the operator and passenger compartments as specified by the applicable standard. SAE J 369 is technically equivalent to ISO 3795, ASTM D 5132 and FMVSS 302.

Flammability of Polymeric Interior Materials Horizontal Test Method

KS B 7749-2007 农用地速车辆标识板

이 규격은 승용 농업기계가 저속 차량임을 나타내는 ‘저속 차량 표지판’과 야간주행의 안전사

Agricultural vehicle identification emblem

SAE J882-2007 汽车纺织物和塑料的测量厚度用试验方法

This test is designed to measure the thickness of relatively flat textiles, plastics, and similar materials.

Test Method for Measuring Thickness of Automotive Textiles and Plastics

GJB 30A-2006 装甲车辆用合金结构钢钢棒规范

本规范规定了装甲车辆用合金结构钢钢棒的要求、质量保证规定及交货准备等内容。 本规范适用于截面直径或边长不大于250mm的装甲车辆结构零件用热轧、锻制及冷拉钢棒。

Specification for alloy structural steels bars for armoured vehicle

GJB 5906-2006 军用车辆复合材料油封规范

本规范规定了军用车辆复合材料油封（以下简称油封）的要求、质量保证规定和交货准备等。 本规范适用于军用车辆复合材料油封。

Specification for composite oil seal of military vehicles

QC/T 756-2006 轿车用高强度锻铝合金挤压圆棒材

本标准规定了轿车用高强度锻铝合金挤压圆棒材 6A10 的品种、技术要求、试验方法、检验规则 和标志、包装、运输、储存、质量证明书。 本标准适用于直径为 5mm～100mm 的高强度锻铝合金挤压圆棒材。

High strength extruded forge aluminium alloy round bar materials for passenger cars

GJB 5478-2005 顶防护反应装甲规范

本规范规定了顶防护反应装甲的要求、质量保证规定、交货准备等内容。 本规范适用于顶防护反应装甲的制造与验收。

Specification for reactive armor of top shield

SANS 1191:2005 机动车用高防渗透夹层安全玻璃

Covers high penetration-resistant laminated safety glass including bullet-resistant glazing materials for use in vehicles.

High penetration-resistant laminated safety glass for vehicles

SAE J2412-2004 利用可控辐射氙弧仪器加速曝光汽车内部饰件

This test method specifies the operating procedures for a controlled irradiance, xenon arc apparatus used for the accelerated exposure of various automotive interior trim components. This is a performance standard based on the test parameters of SAE J1885. Test duration as well as any exceptions to the sample preparation and performance evaluation procedures contained in this document, are covered in material specifications of the different automotive manufacturers. Equipment qualified to perform this test is determined by material test comparison between instruments approved for SAE J1885 and those intending to perform SAE J2412. A specific test protocol to compare new test equipment to those previously approved must be done by material test comparison by the contractual parties. The interested contractual companies shall identify details of the test protocol and the materials to be tested. At the time of publication of this test method, the committee is developing a 'Protocol To Verify New Test Apparatus' identified as SAE J2413. Any deviations to this test method, such as filter combinations, is to be agreed upon by contractual parties.

Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus

SAE J434-2004 汽车球磨铸铁件(球铁件)

This SAE Standard covers the minimum mechanical properties measured on separately cast test pieces of varying thickness and microstructural requirements for ductile iron castings used in automotive and allied industries. Castings may be specified int he as-cast or heat-treated condition. If castings are heat-treated, prior approval from the customer is required. The appendix provides general information on chemical composition, microstructure and casting mechanical properties, as well as other information for particular service conditions. In this standard SI units are primary and in-lb units are derived.

Automotive Ductile (Nodular) Iron Castings

SAE J2642-2004 汽车热塑材料开发规范的推荐实施规程

This SAE Recommended Practice is intended to establish uniform procedures for developing specifications for automotive thermoplastics. It is intended for use by automotive companies and their suppliers of molded and/or fabricated parts from thermoplastic materials. This document lists those test methods and procedures that are useful for the development of specifications for automotive thermoplastic materials. Not all tests are applicable to all thermoplastic materials. Appendix A contains a cross-reference of appropriate test methods for each family of thermoplastic material. The test methods may change (be added or deleted) in future revisions. This document categorizes the test methods and procedures for developing specifications for automotive thermoplastic materials by categories: a. lot release; b. certification; and c. initial characterization.

Recommended Practice for Developing Specifications for Automotive Thermoplastic Materials

SAE J861-2003 对有机饰件材料的耐摩擦性测试方法

This test can be used to determine the resistance to color rub-off (crocking) of organic trim materials such as fabrics, vinyl coated fabrics, leather, coated fiberboard, and carpet. This method is similar to AATCC Method 8 - Colorfastness to Crocking.

Method of Testing Resistance to Crocking of Organic Trim Materials

SAE J2609-2003 绝缘热屏蔽材料系统的多维热性能

This test method measures the system material properties of an insulated formed heat shield under invehicle conditions. While the material properties of the individual components can often be determined via existing test methods, the system properties of the entire composite is typically much harder to ascertain (especially for multi-layer shields). System material properties include thermal conductivity in the lateral or in-plane (x) direction, thermal conductivity through the thickness or perpendicular (y), surface emissivity on the top and bottom sides of the shield and specific heat of the shield material. All properties are determined for the entire shielding material specimen as a composite of the entire structure. Properties are determined using a testing apparatus that allows for two-dimensional heat flow through the specimen. Due to this, the material property results from this test method may not agree with one-dimensional heat flow type testing methods, but is representative of most heat shield materials performance tested with a centralized heat source. Therefore, material property results from this test method may be more suited for multi-dimensional analytical studies. This standard sets forth the general guidelines to construct and operate the testing apparatus to acquire a satisfactory set of test data. Designs conforming to this standard are included and must not be deviated from for sensitivity reasons that will be discussed in more detail later. Test parameters that cannot be deviated from include, but are not limited to; specimen size, distance between the source and the specimen, source diameter and environmental conditions around the apparatus. This method ultimately determines the shield material properties by using the test data along with an analytical scheme, see Section 8.1. This test method will evaluate both isotropic and anisotropic insulated shielding materials. This may also include multi-layer shielding structures which include embossed/corrugated solids, porous, fibrous, granulated and coated materials.

Multi-Dimensional Thermal Properties of Insulated Heat Shield Material Systems

SAE J1442-2003 高强度热轧钢筋

This SAE Recommended Practice covers two levels of high strength structural low-alloy steel bars having minimum Yield Points of 345 MPa (50 ksi) and 450 MPa (65 ksi). The two strength levels are 345 and 450 MPa or 50 and 65 ksi minimum yield point. Different chemical compositions are used to achieve the specified mechanical properties. In some cases there are significant differences in chemical composition for the same strength level, depending on the fabricating requirements. It should be noted that although the mechanical properties for a steel grade sourced from different suppliers may be the same, the chemical composition may vary significantly. The fabricator should be aware that certain compositional differences may effect the forming, welding, and/or service requirements of the material. It is therefore recommended that the fabricator consult with the producer to understand the effect of chemical composition. The products within the scope of this document include bars of the following types and sizes: Rounds, squares, and hexagons of all sizes (cut length only), flats 5.2 mm (0.203 in) and greater in thickness but not greater than 150 mm (6 in) wide, and flats greater than 5.8 mm (0.229 in) thick and over 150 mm (6 in) to 204 mm (8 in) wide. This document previously covered plates, structural shapes, and bar size shapes of Grades 290A, 345A, 415A, 450A, 345W, 345F, 415F, 485F, and 550F as well as bars of Grades 290A, 415A, and 345W. These products are no longer covered; requirements for these products and grades can be found in ASTM Specifications.

High-Strength, Hot-Rolled Steel Bars

SAE J369-2003 聚合物内饰材料的可燃性水平测试方法

This SAE Standard pertains to automotive vehicles and off-road, self- propelled work machines used in construction, general purpose industrial, agriculture, forestry, and specialized mining machinery. This standard does not address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of ths document to establish safety and health practies and determine the applicability of regularoty limitations prior to use. This test method is intended for burning rate measurement of polymeric materials used in the operator and passenger compartments as specified by the applicable standard. SAE J 369 is technically equivalent to ISO 3795, ASTM D 5132 and FMVSS 302.

Flammability of Polymeric Interior Materials Horizontal Test Method

VC 8078-2003 机动车轮廓范围标记材料

Covers requirements for retro-reflective marking material used for contour markings for heavy and long vehicles and their trailers.

Compulsory specification for material for contour marking on motor vehicles

SAE J2020-2003 使用荧光紫外线和冷凝装置加速汽车外部材料的曝光

This test method specifies the operating conditions for a fluorescent ultraviolet (UV) and condensation apparatus used for the accelerated exposure of various automotive exterior components. Specimen preparation, test duration, and performance evaluation procedures are addressed by each automotive manufacturers material specifications. This SAE Standard may involve hazardous materials, operations, and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of whoever uses this document to consult and establish appropriate and health practices and determine the applicability of regulatory limitations prior to use.

Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus