T51 市政专用汽车 标准查询与下载

BS EN 1501-2:2005+A1:2009 垃圾收集运输车及其相关提升装置.一般要求和安全要求.侧面装载的垃圾收集运输车

 lifting devices for side loaded refuse collection vehicles.

Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Side loaded refuse collection vehicles

BS EN 1501-2:2005 垃圾收集运输车及其相关提升装置.一般要求和安全要求.侧面装载的垃圾收集运输车

This European Standard specifies the technical requirements to minimise the hazards listed in Clause 5 which can arise during the operation and the maintenance of side loaded refuse collection vehicles (side loaded RCVs) used for the collection, transportation and unloading of solid wastes and as intended by the manufacturer or his authorised representative. This European Standard deals with: - side loaded refuse collection vehicles as defined in Clauses 3 and 4; - lifting devices for side loaded refuse collection vehicles. Examples for basic types of side loaded refuse collection vehicles are given in Annex B. This European Standard does not establish the additional requirements for: - design and equipment of the chassis, considered as meeting all road traffic requirements; - operation in severe conditions (e.g. extreme environmental conditions such as: temperatures below – 10 °C and above +40 °C, corrosive environment, tropical environment); - operation subject to special rules (e.g. potentially explosive atmospheres, contaminating environments); - static electricity problems; - transportation of passengers, lifting of persons; - loading by crane; - loading by a satellite vehicle; - containers other than those manufactured according to EN 840, EN 12574 and EN 13071; - handling of loads the nature of which could lead to dangerous situations (e.g. hot wastes, acids and bases, radioactive materials, especially fragile loads, explosives); - hazards occurring during construction, transportation, commissioning, decommissioning; - hazards occurring in relation to traffic on public roads; - wind velocity in excess of 75 km/h; - direct contact with foodstuffs; - hazards due to the noise of the side loaded RCV.

Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Side loaded refuse collection vehicles

NF R17-112-2:2005 垃圾收集车及相关提升装置.一般要求和安全要求.第2部分:侧面装载的垃圾收集车

Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2 : side loaded refuse collection vehicles.

AIR FORCE A-A-58004 B-2005 ,000加仑容量水罐车的消防卡车

This commercial item description (CID) covers a commercial water tanker truck. The tanker has a 6x4 chassis with a diesel engine and an automatic transmission; a two person cab with two doors; a 4,000 gallon water tank; a 1,250 gallon per minute (gpm) f

TRUCK, FIRE FIGHTING, WATER TANKER, 4,000 GALLON CAPACITY

ANSI B71.3-2005 室外动力设备.扫雪机.安全规范

The safety specifications in this standard apply to (a) walk-behind power snow throwers, (b) ride-on power snow throwers, (c) lawn ride-on tractors with snow thrower attachments, (d) lawn and garden tractors with snow thrower attachments, and (e) lever-s

Outdoor Power Equipment - Snow Throwers - Safety Specifications

DIN 30708:2004 雪犁.术语和要求

The standard contents terms and technical requirements for snow ploughs.

Snow ploughs - Terms and requirements

DLA A-A-55544 VALID NOTICE 1-2004 拖曳式旋转扫路机

A-A-55544, dated 24 May 1999, has been reviewed and determined to be valid for use in acquisition

SWEEPER, ROTARY, TOWED

DIN 30716:2003 路面清扫设备和公路养护设备用滚筒路刷.尺寸

This draft standard includes dimensions and designation of roller brushes.

Roller brushes for machines for road surface cleaning and highway maintenance machines - Dimensions

DIN 30707-2:2003 冬季服务车辆.第2部分:带雪犁的冬季服务车辆的相关要求

The document specifies requirements for winter service vehicles with snow ploughs.

Winter service machines - Part 2: Requirements relating to winter service vehicles with snow ploughs

BS EN 13021:2003+A1:2008 冬季使用机械.安全性要求

This European Standard applies to winter service machines which are defined in clause 3. This European Standard deals with all significant hazards (see clause 4) identified through a risk assessment pertinent to winter service machines when they are used as intended and under the conditions foreseen by the manufacturer. This European Standard does not deal with significant hazards associated with !deleted text" EMC. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards associated only with machine operation, setting and adjustments, load discharge and routine maintenance. Winter service machines are normally mounted on carrier vehicles (e.g. trucks, tractors, construction machinery and mobile industrial handling equipment). This European Standard does not cover requirements for the carrier vehicles even where specific modifications have been made to realise the winter service application. These requirements will be handled in directives and standards for the construction of carrier vehicles. The use of winter service machines in public road traffic is governed by national regulations. This standard does not cover any requirements for demountable bodywork systems (e.g. demountable containers). These requirements are specified in other standards. This European Standard does not deal with: ⎯ machines or components which are solely designed for clearing rails such as rail sweepers or blowers; ⎯ walker-operated and hand-held winter service machines; ⎯ highway maintenance machines covered by !EN 13524", such as front-mounted sweepers; ⎯ machines for the maintenance of sports grounds; ⎯ machines for agriculture, horticulture and forestry; ⎯ machines intended for use in potentially explosive atmospheres. This European Standard applies to winter service machines which are manufactured after the date of approval of the standard by CEN.

Winter service machines - Safety requirements

NF P98-791:2001 道路维护设备和产品.洒盐机和扫雪车的液压驱动装置.特性和规范

Road maintenance equipment and products - Hydraulic drive device adapted into salt speader and snow clearing blade carrying vehicles - Characteristics and specifications.

DIN 30731:2001 垃圾收集车.后倾翻倒装置接口条件

Refuse collection vehicles - Interface conditions for rear-end loaded refuse collection vehicles

BS EN 13019:2001+A1:2008 路面清洁机.安全性要求

This European Standard applies to road surface cleaning machines, which are defined in clause 3. The equipment would normally be mounted on a carrier vehicle (e.g. truck, tractor, construction machinery and mobile industrial handling equipment). It is also possible to mount a road surface cleaning machine on its own chassis construction and propulsion system. In all cases the machine and chassis form an integral unit. Directives and standards for the vehicular truck chassis aspect, termed 'carrier vehicle' in this standard, would be those relative to that equipment, even where specific modifications have been made to realize the road surface cleaning application. The use in public road traffic is governed by the national regulations. This European Standard deals with all significant hazards identified through a risk assessment pertinent to road surface cleaning machines when they are used as intended and under the conditions foreseen by the manufacturer. This European Standard does not deal with significant hazards associated with !deleted text" EMC. This European Standard only specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards associated with machine operation, setting and adjustments, load discharge and routine maintenance. This European Standard does not include requirements for the carrier vehicles (e.g. truck) or special constructions. These are covered in directives related to the construction of vehicles. Demountable bodywork systems (e.g. demountable containers) are specified in other standards. This European Standard does not apply to road surface cleaning machines such as front mounted tractor brooms according to EN 13524:2003. This European Standard does not apply to machines or components that are specifically designed for cleaning tram-lines and rail tracks. This European Standard does not deal with the risks associated with the operation of machines in potentially explosive atmospheres. This European Standard applies to machines which are manufactured after the date of approval of the standard by CEN.

Machines for road surface cleaning - Safety requirements

SAE J2542-2001 非推进式附属引擎的自推式扫路机和洗涤器的燃料消耗

This SAE Standard applies to the fuel consumption of non- propulsion engines used to drive exclusively the sweeping and cleaning functions of multi-engine sweepers and scrubbers as defined in SAE J2130. The purpose of this document is to derive a uniform expression of fuel consumption from a simulated test cycle. The derived expression is based on various work situations encountered during a typical daily eight-hour period of operation. The derived fuel consumption may be used to assess the sizing of fuel tanks.

Self-Propelled Sweepers and Scrubbers Fuel Consumption of Non-Propulsion Auxiliary Engines

QC/T 52-2000 垃圾车

本标准规定了垃圾车的定义，要求，试验方法，检验规则，标志、使用说明书，随车文件、运输、贮存。 　　本标准适用于采用定型汽车底盘改装的垃圾车。

rubbish truck

QC/T 652-2000 吸污车

本标准规定了吸污车的定义，要求，试验方法，检验规则，标志，使用说明书，随车文件、运输、贮存。 　　本标准适用于额定装载质量为15t(包括15t)以下，利用定型汽车底盘改装并采用真空泵或其他抽气装置为吸污系统真空源的自卸式吸污车。

Sewage suction truck

CJ/T 89-1999 真空吸污车技术条件

Vacuum sewer cleaner-Specifications

CJ/T 90-1999 真空吸污车性能试验方法

Vacuum sewer cleaner-Methods of performance test

CJ/T 91-1999 真空吸污车可靠性试验方法

Vacuum sewer cleaner.Methods of reliability test

CJ/T 88-1999 真空吸污车分类

Vacuum sewer cleaner-Classifications