位置:首页 >工程技术 >交通运输科学与技术 >EUROPEAN TRANSPORT RESEARCH REVIEW >Assessment of existing and future rail freight services and Technologies for low Density High Value Goods in Europe

现有和未来在欧洲低密度高价值货物的铁路货运服务和技术评估

Assessment of existing and future rail freight services and Technologies for low Density High Value Goods in Europe

作者:Thomas H. Zunder;Dewan Md Zahurul Islam;

关键词:Gap analysis,Rail freight,Low density high value cargo,Operations,Technology,Future rail freight services,Europe

DOI:https://doi.org/10.1007/s12544-017-0277-1

发表时间:2017年

  • 文献详情
  • 相似文献

摘要

简介近年来,货物的构成发生了重大变化,在欧洲,半成品(例如汽车零部件)和成品代表了最大的运输需求。与以前的货物相比,此类货物通常具有较低的密度和较高的价值 (LDHV),并且需要更快、更可靠的运输。目前,LDHV 货物主要通过公路运输。方法本研究采用定性方法,通过由 24 名行业专家组成的在线调查来评估 LDHV 货物竞争性铁路货运服务运营的“现有”解决方案,以及提议的“未来”(即7年后)。结果以“GAP”分析的形式呈现,该分析检查了三个核心主题:“货车”、“火车和枢纽”以及“业务质量和规划”。结果研究发现,在货车的主题,为每辆铁路货车提供电力供应被认为很重要。在火车和枢纽主题中,研究表明,更重要的是航站楼的通道和功能,而不是整体的货物处理能力。在业务质量和规划主题中,有一个问题特别突出:货运和客运服务自由整合的能力;这被认为是未来铁路的关键要求。结论这项研究证明通过铁路货运运输 LDHV 货物的愿望具有潜力,对该领域做出了重大贡献。整合货运和客运服务存在困难,但技术创新可以使货运服务以与客运服务相似的性能水平运行。这项研究发现了许多此类技术创新。预计铁路行业采用这些创新将导致 LDHV 货物运输方式从公路转向铁路。分析表明,调查中提出的新兴技术(例如水平转运)有能力通过直接加强铁路货运服务来促进模式转变,作为公路等不太可持续的模式的替代方案。最后,这项研究具有启发性,因为学术界和业界以前都没有讨论过这个主题,并且确定了未来的研究差距和具有潜在影响的问题,研究人员可以在未来寻找答案。


Abstract

IntroductionIn recent years there have been major changes in the composition of cargo to the point where, in Europe, semi-finished products (e.g. car parts) and finished goods represent the greatest transport demand. This type of cargo is typically of lower density and higher value (LDHV) than previous goods and requires faster and more reliable transportation. Currently, LDHV goods are predominantly transported by road.MethodologyThis research applies qualitative approach with an online survey consisting of 24 industry experts in assessing the ‘existing’ solutions for competitive rail freight service operation for LDHV cargoes, plus the proposed ‘future’ (i.e. in 7 years’ time). The results are presented in the form of a ‘GAP’ analysis that examined three core themes: ‘wagon’, ‘train and hubs’ and ‘business quality and planning’.ResultsThe study finds that, under the theme of wagon, the provision of an electrical power supply to each individual rail freight wagon is deemed important. In the train and hubs theme, the research suggests that greater importance is assigned to terminal access and functionality, rather than their overall cargo handling capabilities. In the business quality and planning theme, one issue in particular stood out: the ability to freely integrate freight and passenger services; this is considered a key requirement of the railways of the future.ConclusionThis research contributes significantly to the field by demonstrating that the desire to transport LDHV goods by rail freight has potential. There are difficulties in integrating freight and passenger services, but technical innovation can allow freight services to operate at similar performance levels to passenger services. This research has identified a number of such technical innovations. It is envisaged that the adoption of these innovations, by the rail industry, will lead to a modal shift from road to rail for the transport of LDHV goods. The analysis suggests that the emerging technologies presented in the survey (e.g. horizontal transhipment) have the capability to promote modal shift by directly strengthening the rail freight service offering, as an alternative to less sustainable modes such as road. Finally the research is revelatory in that this topic has not been addressed by academia nor the industry previously, and has identified future research gaps and questions with potential impact that researchers can look to answer in the future.