IEC 61788-2:1999
超导体 第2部分:临界电流测量 铌(3号)/锡复合超导体的临界直流电流

Superconductivity - Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors

2006-11

 

 

非常抱歉,我们暂时无法提供预览,您可以试试: 免费下载 IEC 61788-2:1999 前三页,或者稍后再访问。

您也可以尝试购买此标准,
点击右侧 “购买” 按钮开始采购(由第三方提供)。

点击下载后,生成下载文件时间比较长,请耐心等待......

 

标准号
IEC 61788-2:1999
发布
1999年
发布单位
国际电工委员会
替代标准
IEC 61788-2:2006
当前最新
IEC 61788-2:2006
 
 
适用范围
This part of IEC 61788 covers a test method for the determination of the d.c. critical current of Nb3Sn composite superconductors which are fabricated by either the bronze process or the internal tin diffusion process and have a copper/non-copper ratio larger than 0,2. This method is intended for use with superconductors which have critical currents of less than 1000 A and n-values larger than 12 under standard test conditions and at magnetic fields of less than or equal to 0,7 times the upper critical magnetic field. The test specimen is immersed in a liquid helium bath at a measured temperature during testing. The Nb3Sn composite test conductor has a monolithic structure with a total round-cross-sectional area that is less than 2 mm. The specimen geometry used in this test method is an inductively coiled specimen. Deviations from this test method that are allowed for routine tests and other specific restrictions are given in this standard. Nb3Sn conductors with critical currents above 1000 A or total cross-sectional areas greater than 2 mm can be measured with the present method with an anticipated reduction in precision and a more significant self-field effect (see annex C). Other, more specialized, specimen test geometries may be more appropriate for larger conductor testing which have been omitted from this present standard for simplicity and to retain precision. The test method given in this standard should in principle apply to Nb3Sn composite wires fabricated by any other process, such as the modified jelly-roll process. This method is also expected to apply to other superconducting composite wires after some appropriate modifications.

IEC 61788-2:1999相似标准


推荐

超导体发展历程

他在大量实验中,曾多次测量到零电压超导电流,但未引起他重视。1962年 年仅20多岁剑桥大学实验物理研究生约瑟夫逊在著名科学家安德森指导下研究超导体能隙性质,他提出在超导结中,电子对可以通过氧化层形成无阻超导电流,这个现象称作直流约瑟夫逊效应。当外加直流电压为V时,除直流超导电流之外,还存在交流电流,这个现象称作交流约瑟夫逊效应。...

回顾ITER计划,浅析其超导材料应用

在传统制备工艺过程中,必然包括时效热处理这一工艺,正是通过这一工艺,传统制备工艺制备NbTi/Cu超导体析出了α-Ti沉淀。由于传统制备工艺不能选择钉扎中心材料、钉扎中心体积含量以及钉扎中心在复合排布都没有办法控制等缺点,于是后来发展了NbTi/Cu超导线材的人工钉扎中心工艺。在APC工艺中,通过人为引入钉扎中心,大大提高了NbTi超导体临界电流密度。...

氢我一下就超导

如果炒得一手好菜,超导临界温度在常压下高能达到135K左右,离室温300K还有一定距离,然已经比单质金属要“有滋有味”多了(如金属铝为1.4K、金属汞为4.2K、金属为9K)[7]。调料加多了,也有烦恼。吃起来很香很美很有味儿,却难以搞明白是哪个调料起到了关键作用,或者调料复合下究竟是一个什么机制。...

国家最高科技奖得主赵忠贤学术生涯(一)

在不到一年时间里,他发现了II类超导体量子磁通线在不可逆运动过程中,从非线性区到线性区转变临界点和临界电流呈线性关系。最初他导师艾维兹博士对这一结果很怀疑,因为不知道有多少人做过测量和研究,怎么别人没发现。为了证明普适性,赵忠贤又从实验室可以找到其他类型材料做实验,这是被很多小组已经研究很透合金,能否看到他在上述系统所观察到现象,是个考验。...


谁引用了IEC 61788-2:1999 更多引用





Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号