ZH
RU
ES

National Measurements of Geometric Dimensions

National Measurements of Geometric Dimensions, Total:213 items.

In the international standard classification, National Measurements of Geometric Dimensions involves: Fibre optic communications, Linear and angular measurements, Non-ferrous metals, Testing of metals, Jewellery, Vocabularies, Road engineering, Solar energy engineering, Metrology and measurement in general, Construction materials, Optics and optical measurements, Semiconducting materials.

HU-MSZT, National Measurements of Geometric Dimensions

MNOSZ 2795-1956

American National Standards Institute （ANSI), National Measurements of Geometric Dimensions

ANSI/EIA 455-55A:1986 Coating Geometry of Optical Fibers, Methods for Measuring the
ANSI/EIA/TIA 455-173:1990 Coating Geometry Measurement for Optical Fiber Side View Method
ANSI/TIA-455-219-2002 FITP219 Multifiber Ferrule Endface Geometry Measurement
ANSI/TIA/EIA 455-176-A-2003 Method of Measuring Optical Fiber Cross-Sectional Geometry by Automated Grey-Scale Analysis
BS EN ISO 3611:2023 Tracked Changes. Geometrical product specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of micrometers for external measurements
ANSI/TIA-455-176-A-2003 Method of Measuring Optical Fiber Cross-Sectional Geometry by Automated Grey-Scale Analysis

German Institute for Standardization, National Measurements of Geometric Dimensions

DIN EN ISO 13225:2012-08 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012); German version EN ISO 13225:2012
DIN 2239:2006-12 Geometrical product specifications (GPS) - Gauge in dimensional metrology - Requirements and testing
DIN EN ISO 1938-1:2016-03 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015); German version EN ISO 1938-1:2015
DIN 32876-1 Bb.1:1999 Verification of geometrical parameters - Electrical linear measurement - General comments and application, examples
DIN EN ISO 1938-2:2017-05 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017); German version EN ISO 1938-2:2017
DIN EN ISO 13385-1:2020-03 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019); German version EN ISO 13385-1:2019
DIN V VDE V 0126-18-2-1:2007 Solar wafers - Part 2-1: Measuring the geometric dimensions of silicon wafers - Wafer thickness
DIN EN ISO 13385-2:2020-09 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020); German and English version EN ISO 13385-2:2020
DIN EN ISO 463:2006-06 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006); German version EN ISO 463:2006
DIN V VDE V 0126-18-2-2:2007 Solar wafers - Part 2-2: Measuring the geometric dimensions of silicon wafers - Variations in thickness
DIN EN ISO 3611:2022-06 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO/DIS 3611:2022); German and English version prEN ISO 3611:2022 / Note: Date of issue 2022-05...
DIN EN ISO 13385-1:2020 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
DIN EN ISO 13102:2012-12 Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012); German version EN ISO 13102:2012
DIN 32877-1:2020-04 Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 1: Basic principles and terms
DIN EN ISO 9493:2011-03 Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010); German version EN ISO 9493:2010
DIN V VDE V 0126-18-2-3:2007 Solar wafers - Part 2-3: Measuring the geometric dimensions of silicon wafers - Waviness and warping
DIN EN ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006); English version of DIN EN ISO 463:2006-06
DIN 32877-1:2020 Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 1: Basic principles and terms
DIN V VDE V 0126-18-2-4:2007 Solar wafers - Part 2-4: Measuring the geometric dimensions of silicon wafers - Saw marks and step type saw marks
DIN EN ISO 13385-2:2020 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020); German and English version EN ISO 13385-2:2020
DIN 863-1:2017-02 Verification of geometrical parameters - Micrometers - Part 1: Standard design micrometer callipers for external measurement; concepts, requirements, testing
DIN 863-1:1999 Verification of geometrical parameters - Micrometers - Part 1: Standard design micrometer callipers for external measurement; concepts, requirements, testing
DIN EN 14617-16:2005-06 Agglomerated stone - Test methods - Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles; German version EN 14617-16:2005
DIN EN ISO 463 Berichtigung 1:2008 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006); German version EN ISO 463:2006, Corrigenda to DIN EN ISO 463:2006-06; German version EN ISO 463:
DIN SPEC 50300:2013 Measuring geometries for assessing the night visibility of retroreflective materials with respect to the retroreflective properties
DIN EN 14617-16:2005 Agglomerated stone - Test methods - Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles; German version EN 14617-16:2005
DIN EN ISO 10360-2:2010-06 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009); German version EN ISO 10360-2:2009
DIN 50441-1:1996 Testing of materials for semiconductor technology - Determination of the geometric dimensions of semiconductor wafers - Part 1: Thickness and thickness variation
DIN 2231:2008-07 Geometrical product specifications (GPS) - Limit gap gauges and forged gauging members over 3 mm up to 100 mm nominal size
DIN EN ISO 3611:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010); German version EN ISO 3611:2010
DIN EN ISO 1938-1:2016 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015); German version EN ISO 1938-1:2015
DIN 32877-2:2021 Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 2: Design characteristics and metrological characteristics for backward scattering measuring principles
DIN 32877-2:2021-07 Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 2: Design characteristics and metrological characteristics for backward scattering measuring principles
DIN 50441-2:1998 Testing of materials for semiconductor technology - Determination of the geometric dimensions of semiconductor wafers - Part 2: Testing of edge profile
DIN 2232:2008-07 Geometrical product specifications (GPS) - Gap gauges "GO" with forged gauging member over 3 mm up to 100 mm nominal size
DIN EN ISO 13102:2009 Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial gauges (electronic digital) - Design and metrological characteristics (ISO/DIS 13102); German version prEN ISO 13102:2009
DIN 2233:2008-07 Geometrical product specifications (GPS) - Gap gauges "NOT GO" with forged gauging member over 3 mm up to 100 mm nominal size
DIN EN ISO 13385-2:2013 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011); German version EN ISO 13385-2:2011
DIN EN ISO 1938-2:2017 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017); German version EN ISO 1938-2:2017
DIN EN ISO 13385-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011); German version EN ISO 13385-2:2011
DIN EN ISO 3611:2023-09 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023); German and English version EN ISO 3611:2023 / Note: Date of issue 2023-08-18*...
DIN EN ISO 9493:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010); German version EN ISO 9493:2010
DIN EN ISO 10360-2:2010 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009); German version EN ISO 10360-2:2009

Association Francaise de Normalisation, National Measurements of Geometric Dimensions

XP E10-100-2:2018 Geometrical product specifications (GPS) - Dimensional measuring methods - Part 2 : evaluation of the geometrical deviations
NF E02-200-1*NF EN ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : plain limit gauges of linear size
NF E11-091:2013 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of callipers
NF EN ISO 1938-2:2017 Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Partie 2 : disques de référence pour calibres
NF E10-100-1:2002 Geometrical product specification (GPS) - Dimensional measuring methods - Part 1 : general conditions of measurement.
NF E10-100-1:2021 Geometrical product specification (GPS) - Dimensional measuring methods - Part 1 : general conditions of measurement
NF EN ISO 1938-1:2015 Spécification géométrique des produits (GPS) - Équipement de mesure dimensionnel - Partie 1 : calibres lisses à limites de taille linéaire
NF E02-200-2*NF EN ISO 1938-2:2017 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2 : reference disk gauges
NF E11-106*NF EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring instruments - Height gauges - Design and metrological characteristics
NF E11-085-1*NF EN ISO 13385-1:2019 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : design and metrological characteristics of callipers
NF E11-095:2013 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of micrometers for external measurements
NF E11-015:2019 Geometrical product specifications (GPS) - Dimensional measuring equipment : measuring rods with spherical ends - Design and metrological requirements
NF EN ISO 13225:2012 Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Mesureurs verticaux - Caractéristiques de conception et caractéristiques métrologiques
NF E11-085-1:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : calliper - Design and metrological characteristics.
NF EN ISO 3611:2023 Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Caractéristiques de conception et caractéristiques métrologiques des micromètres d'extérieur
NF EN ISO 13385-1:2019 Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Partie 1 : caractéristiques de conception et caractéristiques métrologiques des pieds à coulisses
NF E11-092*NF EN ISO 3611:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment : Micrometers for external measurements - Design and metrological characteristics.
NF E11-015:2009 Geometrical product specifications (GPS) - Dimensional measuring equipment : standard reference measuring rods with spherical ends - Design and metrological requirements.
NF E11-085-2*NF EN ISO 13385-2:2020 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2 : design and metrological characteristics of calliper depth gauges
NF E11-096:2013 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of depth gauges
NF E11-050*NF EN ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges
NF E11-085-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2 : calliper depth gauge - Design and metrological characteristics.
NF E11-056:2013 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of digital dial gauge
NF EN ISO 463:2006 Spécification géométrique des produits (GPS) - Instruments de mesurage dimensionnel : comparateurs mécaniques à cadran - Caractéristiques de conception et caractéristiques métrologiques
NF EN ISO 9493:2011 Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel : comparateurs à levier mécaniques - Caractéristiques de conception et caractéristiques métrologiques
NF E11-098-1:2019 Geometrical Product Specifications (GPS) - Dimensional measuring equipments - Part 1 : internal micrometer with tow spindles - Metrological and design characteristics
NF EN ISO 13385-2:2020 Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Partie 2 : caractéristiques de conception et caractéristiques métrologiques des jauges de profondeur
NF E11-056:2016 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of digital dial gauge with plunger
NF E11-150-2*NF EN ISO 10360-2:2010 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2 : CMMs used for measuring linear dimensions
NF E11-098-2:2019 Geometrical product specifications (GPS) - Dimensional measuring equipments - Part 2 : internal micrometer with tow spindles - Acceptance and reverification
NF B10-602-16*NF EN 14617-16:2005 Agglomerated stone - Test methods - Part 16 : determination of dimensions, geometric characteristics and surface quality of modular tiles
NF E11-054*NF EN ISO 9493:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment : dial test indicators (lever type) - Design and metrological characteristics
NF EN ISO 10360-2:2010 Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des machines à mesurer tridimensionnelles (MMT) - Partie 2 : MMT utilisés pour les mesures de dimensions linéaires
NF EN ISO 13102:2012 Spécification géométrique des produits (GPS) - Instruments de mesurage dimensionnel : comparateurs à tige rentrante à affichage numérique - Caractéristiques de conception et caractéristiques métrologiques

British Standards Institution (BSI), National Measurements of Geometric Dimensions

BS EN ISO 1938-1:2015 Geometrical product specifications (GPS). Dimensional measuring equipment. Plain limit gauges of linear size
BS EN ISO 13385-1:2019 Geometrical product specifications (GPS). Dimensional measuring equipment - Design and metrological characteristics of callipers
BS EN ISO 13385-1:2011 Geometrical product specifications (GPS). Dimensional measuring equipment. Callipers. Design and metrological characteristics
BS EN ISO 1938-2:2017 Geometrical product specifications (GPS). Dimensional measuring equipment. Reference disk gauges
BS EN ISO 13385-2:2020 Geometrical product specifications (GPS). Dimensional measuring equipment - Design and metrological characteristics of calliper depth gauges
BS EN ISO 3611:2011 Geometrical product specifications (GPS). Dimensional measuring equipment. Micrometers for external measurements. Design and metrological characteristics
BS EN ISO 3611:2010 Geometrical product specifications (GPS). Dimensional measuring equipment. Micrometers for external measurements. Design and metrological characteristics
BS EN ISO 13225:2012 Geometrical product specifications (GPS). Dimensional measuring equipment; Height gauges. Design and metrological characteristics
22/30398242 DC BS ISO 3611. Geometrical product specifications (GPS). Dimensional measuring equipment: Micrometers for external measurements. Design and metrological characteristics
19/30386749 DC BS EN ISO 13385-2. Geometrical product specifications (GPS). Dimensional measuring equipment. Part 2. Calliper depth gauges; Design and metrological characteristics
BS EN ISO 13385-2:2011 Geometrical product specifications (GPS). Dimensional measuring equipment. Calliper depth gauges. Design and metrological characteristics
BS EN 14617-16:2005 Agglomerated stone - Test methods - Determination of dimensions, geometric characteristics and surface quality of modular tiles
BS EN ISO 463:2006 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges
BS EN ISO 463:2008 Geometrical product specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of mechanical dial gauges
BS EN ISO 13102:2012 Geometrical product specifications (GPS). Dimensional measuring equipment. Electronic digital-indicator gauge. Design and metrological characteristics
BS EN ISO 10360-2:2010 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs used for measuring linear dimensions
BS EN ISO 10360-2:2009 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs used for measuring linear dimensions
BS EN ISO 9493:2011 Geometrical product specifications (GPS). Dimensional measuring equipment. Dial test indicators (lever type). Design and metrological characteristics
BS EN ISO 9493:2010 Geometrical product specifications (GPS). Dimensional measuring equipment. Dial test indicators (lever type). Design and metrological characteristics

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, National Measurements of Geometric Dimensions

GB/T 15077-2008 Geometric size measuring methods of precious metals and their alloy materials
GB/T 15077-1994 Geometric size measuring methods of precious metals and their alloy materials
GB/T 16857.2-2006 Geometrical Product Specifications(GPS). Acceptance and reverification tests for coordinate measuring machines(CMM). Part 2:CMMs used for measuring size
GB/T 15972.20-2008 Specifications for optical fibre test methods.Part 20:Measurement methods and test procedures for dimensions.Fiber geometry
GB/T 15972.21-2008 Specifications for optical fibre test methods.Part 21:Measurement methods and test procedures for dimensions.Coating geometry

Korean Agency for Technology and Standards (KATS), National Measurements of Geometric Dimensions

KS B ISO 1938-1:2020 Geometrical product specifications(GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
KS B ISO 13385-1:2014 Geometrical product specifications(GPS) — Dimensional measuring equipment — Part 1: Callipers; Design and metrological characteristics
KS B ISO 463-2014(2019) Geometrical Product Specifications(GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges
KS B ISO 13385-1-2014(2019) Geometrical product specifications(GPS) — Dimensional measuring equipment — Part 1: Callipers; Design and metrological characteristics
KS B ISO 10360-2:2020 Geometrical product specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) —Part 2: CMMs used for measuring linear dimensions
KS B ISO 10360-2:2015 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 2: CMMs used for measuring size
KS B ISO 10360-2:2003 Geometrical product specifications(GPS)-Acceptance and reverification tests for coodinate measuring machines(CMM)-Part 2:CMMs used for measuring size
KS B ISO 10360-2:2014 Geometrical product specifications(GPS)-Acceptance and reverification tests for coodinate measuring machines(CMM)-Part 2:CMMs used for measuring size

KR-KS, National Measurements of Geometric Dimensions

KS B ISO 1938-1-2020 Geometrical product specifications(GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
KS B ISO 10360-2-2020 Geometrical product specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) —Part 2: CMMs used for measuring linear dimensions

RU-GOST R, National Measurements of Geometric Dimensions

GOST 8.592-2009 State system for ensuring the uniformity of measurements. Single-crystal silicon nanometer range relief measures. Geometrical shapes, linear size and manufacturing material requirements
GOST R 8.592-2009 State system for ensuring the uniformity of measurements. Single-crystal silicon nanometer range relief measure. Geometrical shapes, linear size and manufacturing material requirements
GOST 32825-2014 Automobile roads of general use. Pavements. Methods of measurement of the geometric dimensions of damages
GOST R 8.628-2007 State system for ensuring the uniformity of measurements. Single-crystal silicon nanometer range relief measures. Requirements for geometrical shapes, linear sizes and manufacturing material selection
GOST 8.051-1981 State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST R 8.895-2015 State system for ensuring the traceability of measurements. Geometrical product specifications (GPS). Filtration. Part 1. Overview and basic concepts
GOST R 8.907-2015 State system for ensuring the uniformity of measurements. State verification schedule for means measuring on Martens scales hardness and indentation scales hardness
GOST 8.549-1986 The state system of ensuring the uniformity of measurements. Permissible errors of measurement of linear dimensians to 500 mm with unindicated tolerances
GOST R ISO 16610-21-2015 State system for ensuring the traceability of measurements. Geometrical product specifications (GPS). Filtration. Part 21. Linear profile filters. Gaussian filters

Professional Standard - Light Industry, National Measurements of Geometric Dimensions

QB/T 4888-2015 Geometric size measuring methods of precious metal jewellery and accessory

ES-UNE, National Measurements of Geometric Dimensions

UNE-EN ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) (Endorsed by AENOR in February of 2016.)
UNE-EN ISO 1938-2:2019 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
UNE-EN ISO 13385-1:2019 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN ISO 13385-2:2020 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020) (Endorsed by Asociación Española de Normalización in August of 2020.)
UNE-EN ISO 463:2006/AC:2009 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006/Cor 1:2007/Cor 2:2009)

未注明发布机构, National Measurements of Geometric Dimensions

BS EN ISO 3611:2010(2015) Geometrical product specifications (GPS) — Dimensional measuring equipment : Micrometers for external measurements — Design and metrological characteristics
BS EN ISO 13225:2012(2015) Geometrical product specifications (GPS) — Dimensional measuring equipment ; Height gauges — Design and metrological characteristics
BS EN ISO 463:2006(2015) Geometrical Product Specifications (GPS) — Dimensionalmeasuring equipment — Design and metrological characteristics of mechanical dial gauges
BS EN ISO 9493:2010(2015) Geometrical product specifications (GPS) — Dimensional measuring equipment : Dial test indicators (lever type) — Design and metrological characteristics

International Organization for Standardization (ISO), National Measurements of Geometric Dimensions

ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size
ISO 3611:2023 Geometrical product specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of micrometers for external measurements
ISO 13385-1:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics
ISO 13385-1:2019 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Design and metrological characteristics of callipers
ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics
ISO 3611:2010 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics
ISO 13385-2:2020 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Design and metrological characteristics of calliper depth gauges
ISO 1938-2:2017 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges
ISO 13385-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics
ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges
ISO/CD 5059-1 Geometrical product specifications (GPS) — Dimensional measuring equipment: inside micrometers — Part 1: Two-point inside micrometers — Design and metrological characteristics
ISO 10360-2:2001 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring size
ISO 9493:2010 Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics
ISO 463:2006/Cor 1:2007 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges; Technical Corrigendum 1
ISO 463:2006/cor 2:2009 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges; Technical Corrigendum 2
ISO 10360-2:2009 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions

Japanese Industrial Standards Committee (JISC), National Measurements of Geometric Dimensions

JIS B 7507:2022 Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Vernier, dial and digital callipers
JIS B 7518:2023 Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Vernier, dial and digital calliper depth gauges
JIS B 7440-2:2013 Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 2: CMMs used for measuring linear dimensions
JIS B 7440-2:2003 Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 2: CMMs used for measuring size

Sichuan Provincial Standard of the People's Republic of China, National Measurements of Geometric Dimensions

DB51/T 1555-2012 Dimensional and geometric tolerance measurement methods for tooling for nuclear fuel assemblies

Standard Association of Australia （SAA）, National Measurements of Geometric Dimensions

AS 4826.1:2001 Geometric Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment

Danish Standards Foundation, National Measurements of Geometric Dimensions

DS/EN ISO 13385-1:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics
DS/EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics
DS/EN ISO 3611:2010 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics
DS/EN ISO 13102:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics
DS/EN ISO 13385-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics
DS/EN ISO 463/AC:2009 Geometrical Product Specifications (GPS) – Dimensional measuring equipment – Design and metrological characteristics of mechanical dial gauges
DS/EN ISO 463/AC:2008 Geometrical Product Specifications (GPS) – Dimensional measuring equipment – Design and metrological characteristics of mechanical dial gauges
DS/EN ISO 463:2006 Geometrical Product Specifications (GPS) – Dimensional measuring equipment – Design and metrological characteristics of mechanical dial gauges
DS/EN ISO 9493:2010 Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics
DS/EN 14617-16:2005 Agglomerated stone - Test methods - Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles
DS/EN ISO 10360-2:2010 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions

European Committee for Standardization (CEN), National Measurements of Geometric Dimensions

EN ISO 3611:2023 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
FprEN ISO 3611 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO/FDIS 3611:2023)
EN ISO 3611:2010 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
EN ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
EN ISO 9493:2010 Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics
EN ISO 13385-2:2020 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)
EN ISO 13385-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)
EN 14617-16:2005 Agglomerated stone - Test methods - Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles
CEN EN ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
EN ISO 10360-2:1995 Coordinate Metrology - Part 2. Performance Assessment of Coordinate Measuring Machines (ISO 10360-2 : 1994)
EN ISO 10360-2:2009 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
EN ISO 463:2006/AC:2009 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006/Cor 1:2007/Cor 2:2009)
EN ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
EN ISO 10360-2:2001 Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 2: CMMs Used for Measuring Size ISO 10360-2: 2001

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, National Measurements of Geometric Dimensions

GB/T 34634-2017 Geometrical product specifications (GPS)—Measurement of linear sizes (500 mm-10000 mm) of plain workpiece—Choice of measuring instrument
GB/T 34874.3-2017 Geometrical product specifications (GPS)—X-ray three dimensional size measuring machines—Part 3：Acceptance and reverification tests
GB/T 16857.2-2017 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 2: CMMs used for measuring linear dimensions

Professional Standard - Chemical Industry, National Measurements of Geometric Dimensions

HG/T 2637~2638-2017 Inspection method of geometric dimensions of glass-lined parts and quality classification of glass-lined equipment (2017)

Lithuanian Standards Office , National Measurements of Geometric Dimensions

LST EN ISO 3611:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
LST EN ISO 13385-1:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011)
LST EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
LST EN ISO 13102:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
LST EN ISO 13385-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)
LST EN ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
LST EN ISO 9493:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
LST EN 14617-16-2005 Agglomerated stone - Test methods - Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles
LST EN ISO 463:2006/AC:2009 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006/Cor 1:2007/Cor 2:2009)
LST EN ISO 10360-2:2010 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)

AENOR, National Measurements of Geometric Dimensions

UNE-EN ISO 3611:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
UNE-EN ISO 13385-1:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011)
UNE-EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
UNE-EN ISO 13102:2013 Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
UNE-EN ISO 13385-2:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)
UNE-EN ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
UNE-EN ISO 9493:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
UNE-EN 14617-16:2006 Agglomerated stone - Test methods - Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles
UNE-EN ISO 10360-2:2010 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)

国家市场监督管理总局、中国国家标准化管理委员会, National Measurements of Geometric Dimensions

GB/T 40810.1-2021 Geometrical product specifications (GPS)—Online measurement in process—Part 1:Online verification of geometric features (size and surface texture)
GB/T 34874.6-2020 Geometrical product specifications (GPS)—X-ray three dimensional size measuring machines—Part 6: Testing method of workpieces
GB/T 15972.20-2021 Specifications for optical fibre test methods—Part 20: Measurement methods and test procedures for dimensions—Fibre geometry

CZ-CSN, National Measurements of Geometric Dimensions

CSN 20 0300 Cast.16-1984 Measurements of geometrical accuracy of machine tools. Measuring methods. Di-mensional stability of cylindrical test workpieces of the samé series

PL-PKN, National Measurements of Geometric Dimensions

PN-EN ISO 13385-2-2020-10 E Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)

GOSTR, National Measurements of Geometric Dimensions

GOST R ISO 10360-2-2017 Geometrical product specifications. Acceptance and reverification tests for coordinate measuring machines. Сoordinate measuring machines used for measuring linear dimensions