ZH
RU
ES

Geometry country

Geometry country, Total:499 items.

In the international standard classification, Geometry country involves: Technical drawings, Electrical wires and cables, Linear and angular measurements, Iron and steel products, Products of non-ferrous metals, Commercial vehicles, Equipment for the chemical industry, Surface treatment and coating, Vocabularies, Medical equipment, Fluid storage devices, Fibre optic communications, Tyres, Fasteners, Screw threads, Bearings, Technical product documentation, Testing of metals, Non-ferrous metals, Jewellery, Applications of information technology, Rotating machinery, Refractories, Software development and system documentation, Nuclear energy engineering, Road engineering, Equipment for entertainment, Shafts and couplings, Construction materials, Machine tool systems, Mining and quarrying, Solar energy engineering, Character symbols, Shipbuilding and marine structures in general, Machine tools, Railway rolling stock, Metrology and measurement in general.

RO-ASRO, Geometry country

STAS 738-1960
STAS R 7042-1981 STEEL REAMERS Geometric parameters for cutting parts
STAS SR ISO 7083:1996 Technical drawings. Symbols for geometrical tolerancing. Proportions and dimensions
STAS 12224-1984 INTERNAL INVOLUTE SPUR GEAR PAIR Geometrical and kinematic calculation
STAS R 6781-1983 BLADED CUTTERS OF HIGH- SPEED STEEL Geometrical parameters of cutting part
STAS 12225-1984 INTERNAL INVOLUTE "PARALLEL HELICAL GEAR PAIR Geometrical and kinematic calculation
STAS 11460-1984 GEOMETRY OF THE ACTIVE PART. REFERENCE SYSTEMS AND CHARACTERISTIC ANGLES Terminology and symbols
STAS 10696-1989 AV belt drives for motor vehicles PULLEYS Main parameters and geometrical checking up of wheel grooves

Professional Standard - Aviation, Geometry country

HB 6154-1988 Aircraft cockpit geometry

Military Standard of the People's Republic of China-General Armament Department, Geometry country

GJB 35A-1993 Fighter cockpit geometric dimensions
GJB 35B-2008 Aircrew station geometry for fighter and attacker
GJB 19B-2007 Aircrew seat geometry for fighter and attacker
GJB 1471-1992 Military helicopter cockpit geometric dimensions
GJB 19A-1998 Basic geometric dimensions of fighter seats
GJB 6851.2-2009 Cabin dimension series for bomber and transport.Part 2:Cabin basic geometry dimension for transport
GJB 59.11-1987 Armored Vehicle Test Procedures Determination of External Dimensions and Geometric Characteristics Parameters
GJB 6851.1-2009 Cabin dimension series for bomber and transport.Part 1:Aircrew station basic geometry dimension for bomber and transport

Association Francaise de Normalisation, Geometry country

NF E04-574:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications
NF EN ISO 22081:2021 Spécification géométrique des produits (GPS) - Tolérancement géométrique - Spécifications géométriques générales et spécifications de taille générales
NF E10-000*NF EN ISO 1:2016 Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties
NF EN ISO 1:2022 Spécification géométrique des produits (GPS) - Température normale de référence pour la spécification des propriétés géométriques et dimensionnelles
NF E04-563-3*NF EN ISO 14405-3:2017 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3 : angular sizes
NF EN ISO 14405-3:2017 Spécification géométrique des produits (GPS) - Tolérancement dimensionnel - Partie 3 : tailles angulaires
NF EN ISO 14405-1:2016 Spécification géométrique des produits (GPS) - Tolérancement dimensionnel - Partie 1 : tailles linéaires
NF S94-469:2004 Surgical instruments - Vocabulary - Shapes and geometries.
NF E86-040:1985 Not pressurized tanks. Geometrical and dimensional tolerances.
NF A00-510-3*NF EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3 : general dimensional and geometrical tolerances and machining allowances for castings.
XP E10-100-2:2018 Geometrical product specifications (GPS) - Dimensional measuring methods - Part 2 : evaluation of the geometrical deviations
NF ISO 21391:2019 Sûreté-criticité - Dimensions géométriques pour garantir la sous-criticité - Dimensions d'équipements et cotes d'implantation
XP A00-510-2*XP CEN ISO/TS 8062-2:2014 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2 : rules
NF E04-563-1:2011 Geometrical Product Specification (GPS) - Dimensional tolerancing - Part 1 : linear sizes.
NF E04-563-1*NF EN ISO 14405-1:2016 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1 : linear sizes
NF EN ISO 14405-2:2019 Spécification géométrique des produits (GPS) - Tolérancement dimensionnel - Partie 2 : dimensions autres que tailles linéaires ou angulaires
NF E04-557:2012 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones.
NF E82-201:1987 DROP FORGINGS OF COPPER AND COPPER ALLOYS. DIMENSIONAL AND GEOMETRICAL TOLERANCES.
NF E04-557*NF EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
NF EN ISO 3040:2016 Spécification géométrique des produits (GPS) - Cotation et tolérancement - Cônes
NF A00-510-1*NF EN ISO 8062-1:2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1 : vocabulary
NF EN ISO 10579:2013 Spécification géométrique des produits (GPS) - Cotation et tolérancement - Pièces non rigides
NF E04-563-2:2012 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2 : dimensions other than linear sizes.
NF E04-511:1995 Technical drawings. Symbols for geometrical tolerancing. Proportions and dimensions.
NF EN ISO 2538-2:2014 Spécification géométrique des produits (GPS) - Coins - Partie 2 : cotation et tolérancement
NF ISO 3096:2018 Roulements - Aiguilles - Dimensions d'encombrement, spécification géométrique des produits (GPS) et valeurs de tolérance
NF E11-091:2013 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of callipers
NF E02-352:2013 Geometrical product specifications (GPS) - General tolerances (dimensional and geometrical) for cutted and bended workpieces
NF E02-200-1*NF EN ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : plain limit gauges of linear size
NF E01-012-2*NF EN ISO 2538-2:2014 Geometrical product specifications (GPS) - Wedges - Part 2 : dimensioning and tolerancing
NF E04-554:1988 Technical drawings. Dimensioning and tolerancing. Datums and datum-systems for geometrical tolerances.
NF M60-445*NF ISO 21391:2019 Nuclear criticality safety - Geometrical dimensions for subcriticality control - Equipment and layout
NF E04-565*NF EN ISO 10579:2013 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts
NF E22-383*NF ISO 3096:2018 Rolling bearings - Needle rollers - Boundary dimensions, geometrical product specifications (GPS) and tolerance values
NF E02-200-2*NF EN ISO 1938-2:2017 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2 : reference disk gauges
NF EN 13373:2020 Méthodes d'essai pour pierres naturelles - Détermination des dimensions et autres caractéristiques géométriques
NF EN ISO 180:2019 Méthodes d'essai pour pierres naturelles - Détermination des dimensions et autres caractéristiques géométriques
NF EN ISO 1938-1:2015 Spécification géométrique des produits (GPS) - Équipement de mesure dimensionnel - Partie 1 : calibres lisses à limites de taille linéaire
NF EN ISO 1938-2:2017 Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Partie 2 : disques de référence pour calibres
NF ISO 20515:2022 Roulements - Roulements radiaux, encoches de retenue - Dimensions, spécification géométrique des produits (GPS) et valeurs de tolérance
NF E11-085-1*NF EN ISO 13385-1:2019 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : design and metrological characteristics of callipers
NF E11-106*NF EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring instruments - Height gauges - Design and metrological characteristics
NF E04-560-2:1999 Geometrical Product Specifications (GPS) - Geometric features - Part 2 : extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature.
NF E11-085-1:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : calliper - Design and metrological characteristics.
NF EN ISO 3611:2023 Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Caractéristiques de conception et caractéristiques métrologiques des micromètres d'extérieur
NF E10-100-1:2002 Geometrical product specification (GPS) - Dimensional measuring methods - Part 1 : general conditions of measurement.
NF E11-096:2013 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of depth gauges
NF E10-100-1:2021 Geometrical product specification (GPS) - Dimensional measuring methods - Part 1 : general conditions of measurement
NF E22-355*NF ISO 20515:2022 Rolling bearings - Radial bearings, retaining slots - Dimensions, geometrical product specifications (GPS) and tolerance values
NF ISO 3245:2023 Roulements - Douilles à aiguilles sans bague intérieure - Dimensions d'encombrement, spécification géométrique des produits (GPS) et valeurs de tolérance
NF ISO 3030:2022 Roulements - Cages à aiguilles radiales - Dimensions d'encombrement, spécification géométrique des produits (GPS) et valeurs de tolérance
NF ISO 464:2016 Roulements - Roulements radiaux à segment d'arrêt - Dimensions, spécification géométrique des produits (GPS) et valeurs de tolérance
NF E11-095:2013 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of micrometers for external measurements
NF EN ISO 13385-1:2019 Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Partie 1 : caractéristiques de conception et caractéristiques métrologiques des pieds à coulisses
NF E02-353:2001 Geometrical products specification (GPS) - Chased parts - Dimensional and surface eveness tolerances for dimensions and parts without individual tolerances.
NF ISO 7063:2018 Roulements - Roulements à aiguilles, galets de came - Dimensions d'encombrement, spécification géométrique des produits (GPS) et valeurs de tolérance
NF E11-085-2*NF EN ISO 13385-2:2020 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2 : design and metrological characteristics of calliper depth gauges
NF E11-056:2013 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of digital dial gauge
NF E60-132-1*NF ISO 2773-1:1997 Test conditions for pillar type vertical drilling machines. Testing of the accuracy. Part 1 : geometrical tests.
NF E60-133-1:1996 Test conditions for box type vertical drilling machines. Testing of the accuracy. Part 1 : geometrical tests.
NF F10-020*NF EN 15020+A1:2011 Railway applications - Rescue coupler - Performance requirements, specific interface geometry and test methods
NF E11-050*NF EN ISO 463:2006 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges
NF F32-101:1978 Railway transport equipment. Two axle carrying bogie frames. Determination of reference elements. Geometrical checks.
NF E11-015:2019 Geometrical product specifications (GPS) - Dimensional measuring equipment : measuring rods with spherical ends - Design and metrological requirements
NF EN 14617-16:2005 Pierre agglomérée - Méthodes d'essai - Partie 16 : détermination des dimensions, des caractéristiques géométriques et de l'aspect des carreaux modulaires
NF EN ISO 13225:2012 Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Mesureurs verticaux - Caractéristiques de conception et caractéristiques métrologiques
NF E11-092*NF EN ISO 3611:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment : Micrometers for external measurements - Design and metrological characteristics.
NF E22-302*NF ISO 464:2016 Rolling bearings - Radial bearings with locating snap ring - Dimensions, geometrical product specifications (GPS) and tolerance values
NF E11-056:2016 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of digital dial gauge with plunger
NF ISO 1206:2023 Roulements - Roulements à aiguilles avec bagues usinées - Dimensions d'encombrement, spécification géométrique des produits (GPS) et valeurs de tolérance
NF E11-098-1:2019 Geometrical Product Specifications (GPS) - Dimensional measuring equipments - Part 1 : internal micrometer with tow spindles - Metrological and design characteristics
NF E11-098-2:2019 Geometrical product specifications (GPS) - Dimensional measuring equipments - Part 2 : internal micrometer with tow spindles - Acceptance and reverification
NF E11-015:2009 Geometrical product specifications (GPS) - Dimensional measuring equipment : standard reference measuring rods with spherical ends - Design and metrological requirements.
NF E11-085-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2 : calliper depth gauge - Design and metrological characteristics.

IT-UNI, Geometry country

UNI EN ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications
UNI ISO 7083:1986
UNI 7226-P3-1989
UNI S 58-1941

German Institute for Standardization, Geometry country

DIN EN ISO 22081:2019 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical and dimensional specifications (ISO/DIS 22081:2019); German and English version prEN ISO 22081:2019
DIN EN ISO 22081:2022-10 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021); German version EN ISO 22081:2021
DIN EN ISO 1:2022-10 Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022); German version EN ISO 1:2022
DIN EN ISO 14405-1:2017-07 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016); German version EN ISO 14405-1:2016
DIN EN ISO 13225:2012-08 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012); German version EN ISO 13225:2012
DIN EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2006); English version of DIN EN ISO 8062-3:2007
DIN EN ISO 8062-3:2008 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007); English version of DIN EN ISO 8062-3:2008
DIN EN ISO 8062-3:2019 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO/DIS 8062-3:2019); German and English version prEN ISO 8
DIN EN ISO 3040:2012 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2009); German version EN ISO 3040:2012
DIN EN ISO 3040:2016-12 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016); German version EN ISO 3040:2016
DIN EN ISO 8062-1:2008-01 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007); Trilingual version EN ISO 8062-1:2007
DIN CEN ISO/TS 8062-2:2014-03*DIN SPEC 91184:2014-03 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/TS 8062-2:2013); German version CEN ISO/TS 8062-2:2013
DIN EN ISO 14405-2:2019-06 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018); German version EN ISO 14405-2:2019
DIN EN ISO 8062-1:2008 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007); Trilingual version EN ISO 8062-1:2007
DIN EN ISO 14405-3:2017-07 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016); German version EN ISO 14405-3:2017
DIN ISO 7083:1984 Technical drawings; symbols for geometrical tolerancing; proportions and dimensions
DIN 7868-3:1986-06 Rubber and plastics covered rollers; dimensional and geometrical tolerances
DIN EN ISO 10579:2013-11 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011); German version EN ISO 10579:2013
DIN-Fachbericht ISO/TR 16570:2008 Geometrical product specifications - Linear dimensioning and tolerancing: ? limit deviations - Step dimensions, dimensions, distances, angular sizes and radii (ISO/TR 16570:2004)
DIN EN ISO 14405-2:2019 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
DIN EN ISO 2538-2:2015-01 Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014); German version EN ISO 2538-2:2014
DIN V 4001-2/A1:1989 CAD standard parts file; specification of geometry and parameters; elements of geometry class A; amendment 1
DIN EN ISO 1938-1:2016-03 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015); German version EN ISO 1938-1:2015
DIN 20450:1988-10 Simple underground track points; 20 m radius, 1 : 5 inclination; geometric dimensions
DIN 20470:1988-10 Simple underground track points; 50 m radius, 1 : 7 inclination; geometric dimensions
DIN 20460:1988-10 Simple underground track points; 30 m radius, 1 : 6 inclination; geometric dimensions
DIN 879-1:1999 Verification of geometrical parameters - Dial indicator for linear mesurement - Part 1: With mechanical indication
DIN 32876-1 Bb.1:1999 Verification of geometrical parameters - Electrical linear measurement - General comments and application, examples
DIN 2239:2006-12 Geometrical product specifications (GPS) - Gauge in dimensional metrology - Requirements and testing
DIN 20468:1988-10 Simple crossovers for underground tracks; 30 m radius, 1 : 6 inclination; geometric dimensions
DIN 20478:1988-10 Simple crossovers for underground tracks; 50 m radius, 1 : 7 inclination; geometric dimensions
DIN 20458:1988-10 Simple crossovers for underground tracks; 20 m radius, 1 : 5 inclination; geometric dimensions
DIN 20478:1988 Simple crossovers for underground tracks; 50 m radius, 1 : 7 inclination; geometric dimensions
DIN 20470:1988 Simple underground track points; 50 m radius, 1 : 7 inclination; geometric dimensions
DIN 20458:1988 Simple crossovers for underground tracks; 20 m radius, 1 : 5 inclination; geometric dimensions
DIN 20460:1988 Simple underground track points; 30 m radius, 1 : 6 inclination; geometric dimensions
DIN 2239:2006 Geometrical product specifications (GPS) - Gauge in dimensional metrology - Requirements and testing
DIN 20468:1988 Simple crossovers for underground tracks; 30 m radius, 1 : 6 inclination; geometric dimensions
DIN 3689-1:2021 Shaft to collar connection - Hypotrochoidal H-profiles - Part 1: Geometry and dimensions
DIN EN ISO 1938-2:2017-05 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017); German version EN ISO 1938-2:2017
DIN 21913-11:2000-01 Mine plans - Deep mining - Part 11: Geometrical dimensions in underground workings
DIN EN ISO 1:2016 Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2016); German version EN ISO 1:2016
DIN 874-3:2008 Geometrical product specifications (GPS) - Straight edges - Part 3: Granite straight edges; dimensions, technical delivery conditions
DIN 874-1:2003 Geometrical Product Specifications (GPS) - Straight edges - Part 1: Steel straight edges; Dimensions, technical delivery conditions
DIN 2769:2023-04 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN 21913-11:2000 Mine plans - Deep mining - Part 11: Geometrical dimensions in underground workings
DIN 2253:2006 Geometrical product specifications (GPS) - Reference gauges for gap gauges from 1 mm to 315 mm nominal size
DIN 2253:2006-12 Geometrical product specifications (GPS) - Reference gauges for gap gauges from 1 mm to 315 mm nominal size
DIN 2769:2021 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN EN ISO 13385-1:2020-03 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019); German version EN ISO 13385-1:2019
DIN 20450:1988 Simple underground track points; 20 m radius, 1 : 5 inclination; geometric dimensions
DIN V VDE V 0126-18-2-1:2007 Solar wafers - Part 2-1: Measuring the geometric dimensions of silicon wafers - Wafer thickness
DIN 3689-1:2021-11 Shaft to collar connection - Hypotrochoidal H-profiles - Part 1: Geometry and dimensions
DIN 81209-3:2003 Geometry and stability of ships - Symbols, terms, definitions - Part 3: Multihull surface ships
DIN EN 933-2:1996 Test for geometrical properties of aggregates - Part 2: Determination of particle size distribution; test sieves, nominal size of apertures; German version EN 933-2:1995
DIN 4263:1991 Shapes, dimensions and geometrical values of sewers, drains and pipelines for water and waste water engineering
DIN V VDE V 0126-18-2-2:2007 Solar wafers - Part 2-2: Measuring the geometric dimensions of silicon wafers - Variations in thickness
DIN EN ISO 14405-1:2017 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016); German version EN ISO 14405-1:2016
DIN EN ISO 14405-1:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear Sizes (ISO 14405-1:2010); German version EN ISO 14405-1:2010
DIN EN ISO 14405-3:2017 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016); German version EN ISO 14405-3:2017
DIN EN ISO 14405-2:2012 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011); German version EN ISO 14405-2:2011
DIN 874-2:2003 Geometrical Product Specifications (GPS) - Straight edges - Part 2: Knife edge straight edges; Dimensions, technical delivery conditions
DIN EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016); German version EN ISO 3040:2016
DIN EN ISO 14660-2:1999 Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature (ISO 14660-2:1999); German version EN ISO 14660-2:1999
DIN EN ISO 13385-2:2020-09 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020); German and English version EN ISO 13385-2:2020
DIN 863-1:2017-02 Verification of geometrical parameters - Micrometers - Part 1: Standard design micrometer callipers for external measurement; concepts, requirements, testing
DIN 863-1:1999 Verification of geometrical parameters - Micrometers - Part 1: Standard design micrometer callipers for external measurement; concepts, requirements, testing
DIN V VDE V 0126-18-2-3:2007 Solar wafers - Part 2-3: Measuring the geometric dimensions of silicon wafers - Waviness and warping
DIN EN ISO 463:2006-06 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006); German version EN ISO 463:2006
DIN EN ISO 13385-1:2020 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
DIN EN 15020:2007 Railway applications - Rescue coupler - Performance requirements, specific interface geometry and test methods; English version of DIN EN 15020:2007-02
DIN V VDE V 0126-18-2-4:2007 Solar wafers - Part 2-4: Measuring the geometric dimensions of silicon wafers - Saw marks and step type saw marks
DIN 2231:2008 Geometrical product specifications (GPS) - Limit gap gauges and forged gauging members over 3 mm up to 100 mm nominal size
DIN EN ISO 13102:2012-12 Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012); German version EN ISO 13102:2012
DIN 2233:2008 Geometrical product specifications (GPS) - Gap gauges "NOT GO" with forged gauging member over 3 mm up to 100 mm nominal size
DIN EN 14617-16:2005-06 Agglomerated stone - Test methods - Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles; German version EN 14617-16:2005
DIN 617:2022-10 Rolling bearings - Needle roller bearings with cage - Boundary dimensions, geometrical product specification (GPS) and tolerance values
DIN EN ISO 13385-2:2020 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020); German and English version EN ISO 13385-2:2020
DIN EN ISO 3611:2022-06 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO/DIS 3611:2022); German and English version prEN ISO 3611:2022 / Note: Date of issue 2022-05...

ES-UNE, Geometry country

UNE-EN ISO 22081:2023 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
UNE-EN ISO 1:2022 Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022) (Endorsed by Asociación Española de Normalización in August of 2022.)
UNE-EN ISO 14405-1:2018 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
UNE-CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/TS 8062-2:2013) (Endorsed by AENOR in January of 2014.)
UNE-EN ISO 14405-2:2019 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
UNE-EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
UNE-EN ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) (Endorsed by AENOR in February of 2016.)
UNE-EN ISO 1938-2:2019 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
UNE-EN ISO 13385-1:2019 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN ISO 13385-2:2020 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020) (Endorsed by Asociación Española de Normalización in August of 2020.)
UNE-EN ISO 463:2006/AC:2009 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006/Cor 1:2007/Cor 2:2009)
UNE 135121:2021 Metallic safety barriers for vehicles restraint. W-beam. Materials, geometry, dimensions and tests.

British Standards Institution (BSI), Geometry country

19/30369878 DC BS EN ISO 22081. Geometrical product specifications (GPS). Geometrical tolerancing. General geometrical and dimensional specifications
BS EN ISO 22081:2021 Geometrical product specifications (GPS). Geometrical tolerancing. General geometrical specifications and general size specifications
BS EN ISO 14405-1:2011 Geometrical product specifications (GPS). Dimensional tolerancing. Linear sizes
BS EN ISO 14405-1:2010 Geometrical product specifications (GPS). Dimensional tolerancing. Linear sizes
BS EN ISO 14405-3:2017 Geometrical product specifications (GPS). Dimensional tolerancing. Angular sizes
PD CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts. Rules
BS EN ISO 8062-3:2023 Tracked Changes. Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions
BS EN ISO 8062-3:2007 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. General dimensional and geometrical tolerances and machining allowances for castings
BS EN ISO 14405-1:2016 Tracked Changes. Geometrical product specifications (GPS). Dimensional tolerancing. Linear sizes
19/30395140 DC BS EN ISO 8062-3. Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. Part 3. General dimensional and geometrical tolerances and machining allowances for castings
BS EN ISO 14405-2:2011 Geometrical product specifications (GPS). Dimensional tolerancing. Dimensions other than linear sizes
BS EN ISO 1:2016 Geometrical product specifications (GPS). Standard reference temperature for the specification of geometrical and dimensional properties
BS EN ISO 8062-1:2007 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. Vocabulary
BS ISO 492:2014 Rolling bearings. Radial bearings. Dimensional and geometrical tolerances
BS EN ISO 14405-2:2019 Tracked Changes. Geometrical product specifications (GPS). Dimensional tolerancing. Dimensions other than linear or angular sizes
BS EN ISO 1:2022 Tracked Changes. Geometrical product specifications (GPS). Standard reference temperature for the specification of geometrical and dimensional properties
21/30433772 DC BS EN ISO 1. Geometrical product specifications (GPS). Standard reference temperature for the specification of geometrical and dimensional properties
BS EN ISO 7083:1995 Technical drawings - Symbols for geometrical tolerancing - Proportions and dimensions
BS ISO 3040:2010 Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
BS EN ISO 3040:2012 Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
BS EN ISO 2538-2:2014 Geometrical product specifications (GPS). Wedges. Dimensioning and tolerancing
BS EN ISO 1938-1:2015 Geometrical product specifications (GPS). Dimensional measuring equipment. Plain limit gauges of linear size
17/30358444 DC BS EN ISO 14405-2 AMD1. Geometrical product specifications (GPS). Dimensional tolerancing - Part 2. Dimensions other than linear sizes
BS EN ISO 10579:2013 Geometrical product specifications (GPS). Dimensioning and tolerancing. Non-rigid parts
BS EN ISO 13385-1:2019 Geometrical product specifications (GPS). Dimensional measuring equipment - Design and metrological characteristics of callipers
BS 7172:1989 Guide to assessment of position, size and departure from nominal form of geometric features
BS ISO 21391:2019 Nuclear criticality safety. Geometrical dimensions for subcriticality control. Equipment and layout
BS EN ISO 13385-1:2011 Geometrical product specifications (GPS). Dimensional measuring equipment. Callipers. Design and metrological characteristics
BS EN 933-2:1996 Tests for geometrical properties of aggregates - Determination of particle size distribution - Test sieves, nominal size of apertures
BS EN ISO 13385-2:2020 Geometrical product specifications (GPS). Dimensional measuring equipment - Design and metrological characteristics of calliper depth gauges
BS 6101-2:1991 Machine tool ball screws - Specification for accuracy, including geometrical tests
BS EN ISO 1938-2:2017 Geometrical product specifications (GPS). Dimensional measuring equipment. Reference disk gauges
BS EN ISO 3040:2016 Tracked Changes. Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
19/30386749 DC BS EN ISO 13385-2. Geometrical product specifications (GPS). Dimensional measuring equipment. Part 2. Calliper depth gauges; Design and metrological characteristics
12/30262704 DC BS EN ISO 3040 AMD1. Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
BS ISO 3442-3:2007 Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Power-operated chucks with serrated jaws
BS ISO 3442-2:2006 Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Power-operated chucks with tongue and groove type jaws
BS ISO 3442-1:2006 Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Manually operated chucks with tongue and groove type jaws
BS ISO 3096:2018 Tracked Changes. Rolling bearings. Needle rollers. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
ISO 8062-4:2023 Geometrical product specifications. Dimensional and geometrical tolerances for moulded parts - Rules and general tolerances for castings using profile tolerancing in a general datum system
BS EN 14617-16:2005 Agglomerated stone - Test methods - Determination of dimensions, geometric characteristics and surface quality of modular tiles
BS EN 933-2:2020 Tests for geometrical properties of aggregates - Determination of particle size distribution. Test sieves, nominal size of apertures
BS EN ISO 3611:2011 Geometrical product specifications (GPS). Dimensional measuring equipment. Micrometers for external measurements. Design and metrological characteristics
BS EN ISO 3611:2010 Geometrical product specifications (GPS). Dimensional measuring equipment. Micrometers for external measurements. Design and metrological characteristics
BS EN ISO 13385-2:2011 Geometrical product specifications (GPS). Dimensional measuring equipment. Calliper depth gauges. Design and metrological characteristics
BS EN ISO 13225:2012 Geometrical product specifications (GPS). Dimensional measuring equipment; Height gauges. Design and metrological characteristics
BS ISO 12297-1:2021 Rolling bearings. Cylindrical rollers - Boundary dimensions, geometrical product specifications (GPS) and tolerance values for steel rollers
20/30382569 DC BS ISO 20515. Rolling bearings. Radial bearings, retaining slots. Dimensions, geometrical product specifications (GPS) and tolerance values
BS EN ISO 14660-2:2000 Geometrical Product Specifications (GPS) - Geometrical features - Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
22/30398242 DC BS ISO 3611. Geometrical product specifications (GPS). Dimensional measuring equipment: Micrometers for external measurements. Design and metrological characteristics
BS ISO 1206:2018 Rolling bearings. Needle roller bearings with machined rings. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
BS ISO 20515:2021 Tracked Changes. Rolling bearings. Radial bearings, retaining slots. Dimensions, geometrical product specifications (GPS) and tolerance values
BS ISO 12297-2:2018 Rolling bearings. Cylindrical rollers - Boundary dimensions, geometrical product specifications (GPS) and tolerance values for ceramic rollers
BS EN ISO 463:2006 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges
BS EN ISO 463:2008 Geometrical product specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of mechanical dial gauges

Danish Standards Foundation, Geometry country

DS/ISO 22081:2021 Geometrical product specifications (GPS) – Geometrical tolerancing – General geometrical specifications and general size specifications
DS/EN ISO 22081:2021 Geometrical product specifications (GPS) – Geometrical tolerancing – General geometrical specifications and general size specifications (ISO 22081:2021)
DS/EN ISO 8062-3/AC:2009 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings
DS/EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings
DS/EN ISO 14405-1:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
DS/EN ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes
DS/EN ISO 8062-1:2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary
DS/CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules
DS 991:1985 Technical drawings. Symbols for geometrical tolerancing. Proportions and dimensions
DS/EN ISO 7083:1995 Technical drawings - Symbols for geometrical tolerancing - Proportions and dimensions
DS/EN ISO 3040:2012 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
DS/EN ISO 10579:2013 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts
DS-håndbog 114.3:2012 Geometrical product specifications (GPS) - Part 3: GPS standards on dimension - Specification and verification
DS/EN ISO 13385-1:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics
DS/EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics
DS/EN ISO 14660-2:2000 Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
DS/EN ISO 13385-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics
DS/EN ISO 13102:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics
DS/EN ISO 3611:2010 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics
DS/EN ISO 463/AC:2009 Geometrical Product Specifications (GPS) – Dimensional measuring equipment – Design and metrological characteristics of mechanical dial gauges
DS/EN ISO 463/AC:2008 Geometrical Product Specifications (GPS) – Dimensional measuring equipment – Design and metrological characteristics of mechanical dial gauges
DS/EN ISO 463:2006 Geometrical Product Specifications (GPS) – Dimensional measuring equipment – Design and metrological characteristics of mechanical dial gauges

CZ-CSN, Geometry country

CSN OPT 73 6360-1966 Geometrical arrangement of normal gauge track for the state railways and sidings
CSN 91 1013-1989 Domestic bed furniture for ehildren. Dimension
CSN 35 0049-1977 Rotating electrical machines. Tolerances of mounting dimensions and of geometrical form of electrical rotating machines
CSN 73 0280-1986 Accuracy of geometrical parametres in building industry. Accuracy control of dimensions and form of building components

HU-MSZT, Geometry country

MNOSZ 2795-1956

RU-GOST R, Geometry country

GOST 15634.0-1970 Magnet wire. Test procedure for the dimensions and increase in dimensions due to the covering measuring
GOST 2.801-1974 Unified system for design documentation. Pattern method of projecting. Geometric form, model dimensions
GOST 8.592-2009 State system for ensuring the uniformity of measurements. Single-crystal silicon nanometer range relief measures. Geometrical shapes, linear size and manufacturing material requirements
GOST R 8.592-2009 State system for ensuring the uniformity of measurements. Single-crystal silicon nanometer range relief measure. Geometrical shapes, linear size and manufacturing material requirements
GOST R 8.628-2007 State system for ensuring the uniformity of measurements. Single-crystal silicon nanometer range relief measures. Requirements for geometrical shapes, linear sizes and manufacturing material selection
GOST 30762-2001 Refractory products. Methods of measuring geometrical dimensions, defects of shape and surfaces
GOST 32825-2014 Automobile roads of general use. Pavements. Methods of measurement of the geometric dimensions of damages
GOST 28197-1990 National conformity mark. Form, sizes and technical requirements
GOST R 55144-2012 Basic norms of interchangeability. Geometrical product specifications. Dimensioning and tolerancing for cones

European Committee for Standardization (CEN), Geometry country

EN ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
EN ISO 8062-3:2023 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:2023
EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
EN ISO 1:2022 Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022)
EN ISO 3040:2012 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules
EN ISO 14405-1:2010 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
EN ISO 1:2016 Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties
EN ISO 8062-1:2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007)
prEN ISO 1:2021 Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO/DIS 1:2021)
EN ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes
EN ISO 14405-3:2017 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes
EN ISO 14405-1:2016 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
EN ISO 7083:2021 Technical product documentation - Symbols used in technical product documentation - Proportions and dimensions (ISO 7083:2021)
EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
EN 13538-1:2002 Determination of Dimensional Characteristics of Sleeping Bags Part 1: Internal Dimensions
EN ISO 286-1:2010/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)
EN ISO 7083:1994 Technical Drawings - Symbols for Geometrical Tolerancing - Proportions and Dimensions (ISO 7083 : 1983)
EN ISO 2538-2:2014 Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing
EN ISO 286-2:2010/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)
EN ISO 3611:2023 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
FprEN ISO 3611 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO/FDIS 3611:2023)
EN 15020:2006 Railway applications - Rescue coupler - Performance requirements, specific interface geometry and test methods (Incorporates Amendment A1: 2010)
EN ISO 3611:2010 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
EN ISO 13385-2:2020 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)
EN ISO 13385-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)

AT-ON, Geometry country

OENORM EN ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
ONORM ISO 7083:1985 Technical drawings; Symbols for geometrical tolerancing; proportions and dimensions
OENORM EN ISO 1:2021 Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO/DIS 1:2021)

Lithuanian Standards Office , Geometry country

LST EN ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
LST EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
LST EN ISO 8062-3:2007/AC:2009 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007/Cor 1:2009)
LST EN ISO 14405-2:2012 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
LST EN ISO 14405-1:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2010)
LST EN ISO 8062-1:2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007)
LST EN ISO 7083:2001 Technical drawings - Symbols for geometrical tolerancing - Proportions and dimensions (ISO 7083:1983)
LST EN ISO 3040:2012 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2009)
LST EN ISO 13385-1:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011)
LST EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
LST EN ISO 14660-2:2001 Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature (ISO 14660-2:1999)
LST EN ISO 13385-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)
LST EN ISO 3611:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
LST EN ISO 13102:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)

PL-PKN, Geometry country

PN-EN ISO 22081-2021-07 E Geometrical product specifications (GPS) -- Geometrical tolerancing -- General geometrical specifications and general size specifications (ISO 22081:2021)
PN M01144-1992 Technical drawings. Symbols for geometrical tolerancing. Proportions and dimensions
PN-EN ISO 13385-2-2020-10 E Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)

International Organization for Standardization (ISO), Geometry country

ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications
ISO 8062-3:2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings
ISO 8062-3:2023 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions
ISO 14405-1:2010 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
ISO 14405-1:2016 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
ISO/CD 14405-1 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
ISO 14405-2:2018 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes
ISO 14405-3:2016 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes
ISO 8062-3:2007/cor 1:2009 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings; Technical Corrigendum 1
ISO 1:2016 Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties
ISO 1:2022 Geometrical product specifications (GPS) — Standard reference temperature for the specification of geometrical and dimensional properties
ISO 8062-1:2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary
ISO 492:2014 Rolling bearings - Radial bearings - Dimensional and geometrical tolerances
ISO 3040:2009 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
ISO 7083:2021 Technical product documentation — Symbols used in technical product documentation — Proportions and dimensions
ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes
ISO 7083:1983 Technical drawings; Symbols for geometrical tolerancing; Proportions and dimensions
ISO 10579:2010 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts
ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size
ISO/TR 16570:2004 Geometrical Product Specifications (GPS) - Linear and angular dimensioning and tolerancing: ? limit specifications - Step dimensions, distances, angular sizes and radii
ISO 2538-2:2014 Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing
ISO 3096:2018 Rolling bearings - Needle rollers - Boundary dimensions, geometrical product specifications (GPS) and tolerance values
ISO 13385-1:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics
ISO 3611:2023 Geometrical product specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of micrometers for external measurements
ISO 13385-1:2019 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Design and metrological characteristics of callipers
ISO 13385-2:2020 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Design and metrological characteristics of calliper depth gauges
ISO 1938-2:2017 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges
ISO 10579:2010/Cor 1:2011 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts; Technical Corrigendum 1
ISO 464:2015 Rolling bearings - Radial bearings with locating snap ring - Dimensions, geometrical product specifications (GPS) and tolerance values
ISO 13385-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics
ISO 14660-2:1999 Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
ISO 8062-4:2017 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 4: General tolerances for castings using profile tolerancing in a general datum system
ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics
ISO 7063:2018 Rolling bearings - Needle roller bearing track rollers - Boundary dimensions, geometrical product specifications (GPS) and tolerance values
ISO/CD 5059-1 Geometrical product specifications (GPS) — Dimensional measuring equipment: inside micrometers — Part 1: Two-point inside micrometers — Design and metrological characteristics
ISO 3611:2010 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics
ISO 1206:2018 Rolling bearings - Needle roller bearings with machined rings - Boundary dimensions, geometrical product specifications (GPS) and tolerance values
ISO 8062-4 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 4: Rules and general tolerances for castings using profile tolerancing in a general datum system
ISO 3442-2:2005 Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 2: Power-operated chucks with tongue and groove type jaws
ISO 3442-1:2005 Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 1: Manually operated chucks with tongue and groove type jaws

未注明发布机构, Geometry country

GJB 1471A-2012 Military helicopter cockpit geometric dimensions
BS PD CEN ISO/TS 8062-2:2013(2015) Geometrical Product Specifications (GPS) — Dimensional and geometrical tolerances for moulded parts Part 2 : Rules
BS ISO 10579:2010 Geometrical product specifications (GPS) — Dimensioning and tolerancing — Non - rigid parts
BS 7172:1989(2010) Guide to Assessment ofposition, sizeanddeparturefrom nominal form of geometric features
BS EN ISO 3611:2010(2015) Geometrical product specifications (GPS) — Dimensional measuring equipment : Micrometers for external measurements — Design and metrological characteristics
BS EN ISO 13225:2012(2015) Geometrical product specifications (GPS) — Dimensional measuring equipment ; Height gauges — Design and metrological characteristics
BS ISO 7063:2018(2020) Rolling bearings — Needle roller bearing track rollers — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
BS EN ISO 463:2006(2015) Geometrical Product Specifications (GPS) — Dimensionalmeasuring equipment — Design and metrological characteristics of mechanical dial gauges

Society of Automotive Engineers (SAE), Geometry country

SAE J2370-2009 Geometric Dimensions and Tolerancing for Curved Hose
SAE J2370-2021 Geometric Dimensions and Tolerancing for Curved Hose
SAE J2370-2003 Geometric Dimensions and Tolerancing for Curved Hose
SAE J2717-2006 Tests to Define Tire Size (Geometry), Mass, and Inertias
SAE J2717-2012 Tests to Define Tire Size (Geometry), Mass, and Inertias

Professional Standard - Chemical Industry, Geometry country

HG/T 2637-2007 Detecting methods of geometry dimension for glass-lined parts
HG/T 2637-1994 Method for detecting geometric dimensions of glass-lined parts
HG/T 2637-2011 Method for detecting geometric dimensions of glass-lined parts
HG/T 2637~2638-2017 Inspection method of geometric dimensions of glass-lined parts and quality classification of glass-lined equipment (2017)

SAE - SAE International, Geometry country

SAE J2370-2001 Geometric Dimensions and Tolerancing for Curved Hose
SAE J2717-2018 Tests to Define Tire Size (Geometry)@ Mass@ Inertias

工业和信息化部, Geometry country

HG/T 2637-2017 Method for detecting geometric dimensions of glass-lined parts
SJ/T 11630-2016 Test method for geometric dimensions of silicon wafers for solar cells

Japanese Industrial Standards Committee (JISC), Geometry country

JIS B 0680:2023 Geometrical product specifications (GPS) -- Standard reference temperature for the specification of geometrical and dimensional properties
JIS B 0420-1:2016 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes
JIS B 1071:1985 Method of verification for size and geometry of threaded fasteners
JIS B 1071:2010 Fasteners -- Methods of verification for size and geometry
JIS B 0028:2017 Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Cones
JIS B 7507:2022 Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Vernier, dial and digital callipers
JIS B 7518:2023 Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Vernier, dial and digital calliper depth gauges
JIS B 0615-2:2017 Geometrical product specifications (GPS) -- Wedges -- Part 2: Dimensioning and tolerancing
JIS B 0672-2:2002 Geometrical Product Specifications (GPS) -- Geometrical features -- Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature

Korean Agency for Technology and Standards (KATS), Geometry country

KS B ISO 14405-1:2017 Geometrical product specifications(GPS) — Dimensional tolerancing — Part 1: Linear sizes
KS B ISO 8062-1-2014(2019) Geometrical product specifications(GPS) — Dimensional and geometrical tolerances for moulded parts — Part 1: Vocabulary
KS B ISO 3040:2019 Geometrical product specifications(GPS) — Dimensioning and tolerancing — Cones
KS B ISO 14405-2:2017 Geometrical product specifications(GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes
KS B ISO 8062-1:2014 Geometrical product specifications(GPS) — Dimensional and geometrical tolerances for moulded parts — Part 1: Vocabulary
KS B ISO 8062-1:2012 Geometrical product specifications(GPS)-Dimensional and geometrical tolerances for moulded parts-Part 1:Vocabulary
KS B ISO 3040:2014 Geometrical Product Specifications(GPS) — Dimensioning and tolerancing — Cones
KS B ISO 3040:2016 Geometrical Product Specifications(GPS) — Dimensioning and tolerancing — Cones
KS A ISO 7083:2019 Technical drawings — Symbols for geometrical tolerancing — Proportions and dimension
KS B 0239-2016 Method of verification for size and geometry of threaded fasteners
KS B ISO 10579:2019 Geometrical product specifications(GPS) — Dimensioning and tolerancing — Non-rigid parts
KS B 0239-2021 Method of verification for size and geometry of threaded fasteners
KS A ISO 7083:2002 Technical drawings-Symbols for geometrical tolerancing-Proportions and dimensions
KS A ISO 7083:2014 Technical drawings — Symbols for geometrical tolerancing — Proportions and dimension
KS B ISO 1938-1:2020 Geometrical product specifications(GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
KS B ISO 10579:2009 Technical drawings-Dimensioning and tolerancing-Non-rigid parts
KS B ISO 10579:2014 Geometrical product specifications(GPS) — Dimensioning and tolerancing — Non-rigid parts
KS B ISO 2538-2:2021 Geometrical product specifications(GPS) — Wedges —Part 2: Dimensioning and tolerancing
KS B ISO 2538-2:2016 Geometrical product specifications (GPS) — Wedges — Part 2: Dimensioning and tolerancing
KS B ISO 16570:2013 Geometrical Product Specifications(GPS)-Linear and angular dimensioning and tolerancing:+/-limit specifications-Step dimensions, distances, angular sizes and radii
KS B ISO 16570-2006(2011) Geometrical Product Specifications(GPS)－Linear and angular dimensioning and tolerancing：＋/－limit specifications－Step dimensions, distances, angular sizes and radii
KS B ISO 13385-1:2014 Geometrical product specifications(GPS) — Dimensional measuring equipment — Part 1: Callipers; Design and metrological characteristics
KS B ISO 463-2014(2019) Geometrical Product Specifications(GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges
KS B ISO 13385-1-2014(2019) Geometrical product specifications(GPS) — Dimensional measuring equipment — Part 1: Callipers; Design and metrological characteristics
KS B ISO 14660-2:2014 Geometrical product specifications(GPS) — Geometrical features — Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
KS B ISO 14660-2:2004 Geometrical Product Specifications(GPS)-Geometrical features-Part 2:Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
KS B ISO 3442-1:2009 Machine tools-Dimensions and geometric tests for self-centring chucks with two-piece jaws- Part 1:Manually operated chucks with tongue and groove type jaws
KS B ISO 3442-2:2009 Machine tools-Dimensions and geometric tests for self-centring chucks with two-piece jaws-Part 2:Power-operated chucks with tongue and groove type jaws

KR-KS, Geometry country

KS B ISO 14405-1-2017 Geometrical product specifications(GPS) — Dimensional tolerancing — Part 1: Linear sizes
KS B ISO 14405-2-2017 Geometrical product specifications(GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes
KS B ISO 3040-2019 Geometrical product specifications(GPS) — Dimensioning and tolerancing — Cones
KS B ISO 14405-1-2022 Geometrical Product Specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
KS B ISO 14405-2-2022 Geometrical Product Specifications(GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes
KS A ISO 7083-2019 Technical drawings — Symbols for geometrical tolerancing — Proportions and dimension
KS B ISO 10579-2019 Geometrical product specifications(GPS) — Dimensioning and tolerancing — Non-rigid parts
KS B ISO 1938-1-2020 Geometrical product specifications(GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
KS B ISO 2538-2-2016 Geometrical product specifications (GPS) — Wedges — Part 2: Dimensioning and tolerancing
KS B ISO 2538-2-2021 Geometrical product specifications(GPS) — Wedges —Part 2: Dimensioning and tolerancing
KS B ISO 3442-3-2009 Machine tools－Dimensions and geometric tests for self-centring chucks with two-piece jaws－Part 3：Power-operated chucks with serrated jaws

American National Standards Institute （ANSI), Geometry country

ANSI/EIA 455-55A:1986 Coating Geometry of Optical Fibers, Methods for Measuring the
ANSI/TIA-455-219-2002 FITP219 Multifiber Ferrule Endface Geometry Measurement
ANSI/EIA/TIA 455-173:1990 Coating Geometry Measurement for Optical Fiber Side View Method
ANSI/TIA/EIA 455-176-A-2003 Method of Measuring Optical Fiber Cross-Sectional Geometry by Automated Grey-Scale Analysis
BS ISO 8062-4:2023 Tracked Changes. Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules and general tolerances for castings using profile tolerancing in a general datum system (British Standard)
ANSI/TIA-455-176-A-2003 Method of Measuring Optical Fiber Cross-Sectional Geometry by Automated Grey-Scale Analysis
BS EN ISO 3611:2023 Tracked Changes. Geometrical product specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of micrometers for external measurements

AENOR, Geometry country

UNE-EN ISO 8062-3:2009 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
UNE-EN ISO 14405-2:2015 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
UNE-EN ISO 14405-1:2012 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2010)
UNE-EN ISO 8062-1:2009 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007)
UNE-EN ISO 7083:1996 TECHNICAL DRAWINGS. SYMBOLS FOR GEOMETRICAL TOLERANCING. PROPORTIONS AND DIMENSIONS. (ISO 7083:1983).
UNE-EN ISO 2538-2:2015 Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
UNE 135121:2012 Metallic safety barriers for vehicle restraint. W-Beam. Materials, geometry, dimensions and tests.
UNE-EN ISO 13385-1:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011)
UNE-EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
UNE-EN ISO 14660-2:2000 Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature (ISO 14660-2:1999)
UNE-EN ISO 10579:2015 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
UNE-EN ISO 13385-2:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)
UNE-EN ISO 3611:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
UNE-EN ISO 13102:2013 Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)

国家市场监督管理总局、中国国家标准化管理委员会, Geometry country

GB/T 38762.3-2020 Geometrical product specifications (GPS)—Dimensional tolerancing—Part 3: Angular sizes
GB/T 38762.1-2020 Geometrical product specifications (GPS)—Dimensional tolerancing—Part 1: Linear sizes
GB/T 38762.2-2020 Geometrical product specifications (GPS)—Dimensional tolerancing—Part 2: Dimensions other than linear or angular sizes
GB/T 39645-2020 Technical drawings—Symbols for geometrical tolerancing proportions and dimensions
GB/T 40742.4-2021 Geometrical product specifications (GPS)—Geometrical precision verification—Part 4：Evaluation of dimension and geometrical error，discriminant pattern of minimum zone
GB/T 40810.1-2021 Geometrical product specifications (GPS)—Online measurement in process—Part 1:Online verification of geometric features (size and surface texture)
GB/T 6445-2021 Rolling bearings—Needle roller bearing track rollers—Boundary dimensions, geometrical product specifications (GPS) and tolerance values

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Geometry country

GB/T 42124.1-2022 Geometrical product specifications (GPS)—Dimensional and geometrical tolerances for moulded parts—Part 1:Vocabulary
GB/T 15077-2008 Geometric size measuring methods of precious metals and their alloy materials
GB/T 15077-1994 Geometric size measuring methods of precious metals and their alloy materials
GB/T 6414-2017 Castings.Dimensional tolerances and geometrical tolerances and machining allowances
GB/T 3177-2009 Geometrical Product Specifications(GPS).Inspection of plain workpiece sizes
GB/T 16892-2022 Geometrical product specifications (GPS)—Dimensioning and tolerancing—Non-rigid parts
GB/Z 24638-2009 Geometrical Product Specifications (GPS).Linear and angular dimensioning and tolerancing:+/- limit specifications.Step dimensions,distances,angular sizes and radii
GB/T 4096.2-2022 Geometrical product specifications (GPS)—Wedges—Part 2: Dimensioning and tolerancing
GB/T 41103-2022 Rolling bearings—Ceramic cylindrical rollers—Boundary dimensions，geometrical product specifications（GPS）and tolerance values

SE-SIS, Geometry country

SIS SS-ISO 7083:1984 Technical drawings - Symbols for geometrical tolerancing - Proportions and dimensions

Professional Standard - Machinery, Geometry country

JB/T 9151.5-1999 Mehtod of verification for fastenes.Size and geometry.Pins
JB/T 9151.6-1999 Mehtod of verification for fastenes.Size and geometry.Rivets
JB/T 9151.4-1999 Mehtod of verification for fastenes.Size and geometry.Washers
JB/T 9151.7-1999 Mehtod of verification for fastenes.Size and geometry.Rings
JB/T 9151.2-1999 Mehtod of verification for fastenes.Size and geometry.Wood screws
JB/T 9151.3-1999 Mehtod of verification for fastenes.Size and geometry.Tapping screws
JB/T 9151.1-1999 Mehtod of verification for fastenes.Size and geometry.Bolts,screws,studs and nuts

YU-JUS, Geometry country

JUS ISO 7083:1992 Technical drawings. Symbols for geometrical tolerancing. Proportions and dimensions

NO-SN, Geometry country

NS 1429-1985 Technical drawings - Symbols for geometrical tolerancing, proportions and dimensions

CEN - European Committee for Standardization, Geometry country

EN ISO 14405-2:2019 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes

Professional Standard - Light Industry, Geometry country

QB/T 4888-2015 Geometric size measuring methods of precious metal jewellery and accessory

American Society of Mechanical Engineers (ASME), Geometry country

ASME Y14.5.2-2000 Certification of Geometric Dimensioning and Tolerancing Professionals
ASME Y14.5-2018 Certification of Geometric Dimensioning and Tolerancing Professionals
ASME Y14.5.2-2017 Certification of Geometric Dimensioning and Tolerancing Professionals
ASME STP-PT-050-2012 AN INVESTIGATION OF THREE RADIOGRAPHIC ACCESS PORT PLUG GEOMETRIES AND THE SURROUNDING PIPE WALL UNDERGOING CREEP

IN-BIS, Geometry country

Sichuan Provincial Standard of the People's Republic of China, Geometry country

DB51/T 1555-2012 Dimensional and geometric tolerance measurement methods for tooling for nuclear fuel assemblies

The Aluminum Association, Geometry country

AA H35.2-2013 American National Standard Dimensional Tolerances for Aluminum Mill Products

VN-TCVN, Geometry country

TCVN 260-2008 Geometrical Product Specifications(GPS).Linear and angular dimensioning and tolerancing:+/- limit specifications.Step dimensions,distances,angular sizes and radii
TCVN 4279-1-2008 Machine tools.Dimensions and geometric tests for self-centring chucks with two-piece jaws.Part 1: Manually operated chucks with tongue and groove type jaws
TCVN 4279-2-2008 Machine tools.Dimensions and geometric tests for self-centring chucks with two-piece jaws.Part 2: Power-operated chucks with tongue and groove type jaws
TCVN 4279-3-2008 Machine tools.Dimensions and geometric tests for self-centring chucks with two-piece jaws.Part 3: Power-operated chucks with serrated jaws

The American Road & Transportation Builders Association, Geometry country

AASHTO GD-2-1965 A Policy on Geometric Design of Rural Highways Withdrawn Replaced by AASHTO GDHS

TH-TISI, Geometry country

TIS 210.7-1986 Standard for mechanical drawings.part 8: geometrical toleranctng: proportions and dimensions of symbols

Standard Association of Australia （SAA）, Geometry country

AS 4826.1:2001 Geometric Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment

Professional Standard - Nuclear Industry, Geometry country

EJ/T 787-2007 Test methods for geometric dimension, geometric density and appearance qullity of sintered uranium dioxide pellet

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Geometry country

GB/T 34634-2017 Geometrical product specifications (GPS)—Measurement of linear sizes (500 mm-10000 mm) of plain workpiece—Choice of measuring instrument