ZH
RU
ES

3. Experimental materials and methods

3. Experimental materials and methods, Total:498 items.

In the international standard classification, 3. Experimental materials and methods involves: Quality, Lubricants, industrial oils and related products, Test conditions and procedures in general, Wood-based panels, Insulating materials, Refractories, Fruits. Vegetables, Road engineering, Protection against fire, Earthworks. Excavations. Foundation construction. Underground works, Construction materials, Corrosion of metals, Dentistry, Waxes, bituminous materials and other petroleum products, Products of the chemical industry, Fluid power systems, Electricity. Magnetism. Electrical and magnetic measurements, Materials for the reinforcement of composites, Testing of metals, Products of the textile industry, Glass, Heat recovery. Thermal insulation, Road vehicle systems, Analytical chemistry, Rubber and plastics products, Materials and articles in contact with foodstuffs, Nuclear energy engineering, Wastes, Environmental testing, Pipeline components and pipelines, Paints and varnishes, Materials for aerospace construction, Plastics, Reinforced plastics, Rubber, Protection of and in buildings, Surface treatment and coating, Insulating fluids, Birth control. Mechanical contraceptives, Wood, sawlogs and sawn timber, Biology. Botany. Zoology, Kitchen equipment, Ceramics, Mechanical testing, Buildings, Standardization. General rules, Fluid storage devices, Textile fibres, Protective equipment, Non-textile floor coverings, Sterilization and disinfection, Medical equipment, Linear and angular measurements, Furniture, Printed circuits and boards, Wind turbine systems and other alternative sources of energy, Iron and steel products, Medical sciences and health care facilities in general, Products of non-ferrous metals, Organic chemicals, Fuels, Solar energy engineering, Valves, Fertilizers, Electrical wires and cables, Construction technology, Seals, glands, Thermodynamics and temperature measurements, Adhesives, Items of art and handicrafts, Footwear, Environmental protection, Petroleum products in general, Cellular materials.

RU-GOST R, 3. Experimental materials and methods

GOST 27640-1988 Engineering materials and lubricants. Experimental evaluation of coefficient of friction
GOST 17177-1994 Thermal insulating materials and products for building application. Test methods
GOST 17177-1987 Heat insulating construction materials and products. Methods of control
GOST 30629-1999 Cladding materials and products made of natural stone. Test methods
GOST 30629-2011 Facing materials and products made of natural stone. Test methods
GOST 29318-1992 Paints and varnishes. Evaluation of compatibility of a product with a surface to be painted. Methods of test
GOST 23.208-1979 Ensuring of wear resistance of products. Wear resistance testing of materials by friction against loosely fixed abrasive particles
GOST R 52540-2006 Refractory clays and kaolins for production of refractories. Acceptance rules and methods of sampling
GOST R 51372-1999 Accelerated life and storable life tests methods in special aggresive and other special medias for technical products, matherial and sistems of matherials. General
GOST 30255-1995 Furniture, timber and polymers. Method for determination of formaldehyde and other volatile chemicals in the air of climatic chambers
GOST R 53133.2-2008 Medical laboratory technologies. Quality control of clinical laboratory tests. Part 2. Rules for intra-laboratory quality control of quantitative methods of clinical laboratory tests using control materials
GOST IEC 60811-2-1-2011 Common test methods for insulating and sheathing materials of electric and optical cables. Part 2-1. Methods specific to elastomeric compounds. Ozone resistance, hot set and mineral oil immersion tests
GOST EN 1186-1-2015 Materials and articles in contact with foodstuffs. Plastics. Part 1. Guide to the selection of conditions and test methods for overall migration
GOST 23.221-1984 Products weak resistance assurance. Experemental evaluation of lubricants temperature stability at friction
GOST R 55717-2013 Ultrasonics. Real-time pulse-echo scanners. Phantom with cylindrical, artificial cysts in tissue-mimicking material and method for evaluation and periodic testing of 3D-distributions of void-detectability ratio (VDR)

Group Standards of the People's Republic of China, 3. Experimental materials and methods

T/CFA 010604.6-2018 Test method on three body abrasion of metallic materials
T/CNTAC 4-2017 Testing method for coefficient of friction between yarn and solid material
T/CEEIA 437-2020 Standard Test Methods for Compatibility of Natural Ester Type Insulating Oil with Construction Material
T/CEEIA 436-2020 Test Method for Compatibility of Synthetic Organic Ester Type Insulating Oil and Construction Material

Guangdong Provincial Standard of the People's Republic of China, 3. Experimental materials and methods

DB44/T 411-2007 Wood-plastic Composites—Examination and Test Methods

Indonesia Standards, 3. Experimental materials and methods

SNI 04-6190.1.2-2001 Common test methods for insulating and sheathing materials of electric cables. Part 1: Methods for general application - Section 2: Thermal ageing methods
SNI 04-6190.3.2-2000 Common test methods for insulating and sheathing materials of electric cables. Part 3: Method specific to PVC compound - Section 2: Lost of mass test - Thermal stability tests
SNI 04-6190.3.1-2001 Common test methods for insulating and sheathing materials of electrical cables - Part 3: Methods specific to PVC compound - Section 1: Pressure test at high temperature - Test for resistance to cracking
SNI 1740-2008 Testing methods fire test of building materials for fire protection in houses and buildings
SNI 04-6190.1.3-2001 Common test methods for insulating and sheating materilas of electric cables - Part 1: Methods for general applications - Section 3: Methods for determining the density - Water absorption tests - Shrink
SNI 8059-2014 Standard practice for conducting an interlaboratory test program to determine the precision of test methods for construction materials
SNI 04-6190.4.2-2001 Common test methods for insulating and sheating materials of electrical cables. Part 4: Methods specific to polyethylene and polypropylene compounds - Section 2: Elongation to break after pre-conditioning - Wrapping test after pre-conditioning - Wrappin
SNI 03-6865-2002 Procedure for preparation of inter-laboratory testing program for determining precission of construction materials test method
SNI 04-6190.5.1-2001 Common test methods for insulating and sheathing materials of electric cables. Part 5: Methods specific to filling compound - Section 1: Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components

NL-NEN, 3. Experimental materials and methods

NEN-EN 590-1993 Automative fuels. Diesel. Requirements and methods of test
NEN-EN 589-1993 Automative fuels. LPG. Requirements and methods of test

German Institute for Standardization, 3. Experimental materials and methods

DIN EN 12802:2011-12 Road marking materials - Laboratory methods for identification; German version EN 12802:2011 / Note: To be replaced by DIN EN 12802 (2018-12).
DIN EN 1183:1997-08 Materials and articles in contact with foodstuffs - Test methods for thermal shock endurance; German version EN 1183:1997
DIN EN 252:1990 Field test method for determining the relative protective effectiveness of a wood preservative in ground contact; german version EN 252:1989
DIN EN 14481:2003-09 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact; German version EN 14481:2003
DIN EN 14481:2003 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact; German version EN 14481:2003
DIN EN 1217:1998-01 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles; German version EN 1217:1998
DIN CEN/TS 15397:2006 Wood preservatives - Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test; German version CEN/TS 15397:2006
DIN EN 13258:2003 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles; German version EN 13258:2003
DIN EN 13258:2003-07 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles; German version EN 13258:2003
DIN EN 1184:1997-08 Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles; German version EN 1184:1997
DIN EN 252:2015 Field test method for determining the relative protective effectiveness of a wood preservative in ground contact; German version EN 252:2014
DIN EN ISO 10722:2020 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method) (ISO 10722:2019)
DIN EN 1186-2:2020 Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration in vegetable oils; German and English version prEN 1186-2:2020
DIN EN 1186-2:2022 Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration in vegetable oils
DIN EN 1186-3:2020 Materials and articles in contact with foodstuffs - Plastics - Part 3: Test methods for overall migration in evaporable simulants; German and English version prEN 1186-3:2020
DIN EN 1186-3:2022 Materials and articles in contact with foodstuffs - Plastics - Part 3: Test methods for overall migration in evaporable simulants
DIN EN ISO 11114-4:2005 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement (ISO 11114-4:2005); English version of DIN EN ISO 11114-4
DIN EN ISO 11114-5:2022-05 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 5: Test methods for evaluating plastic liners (ISO 11114-5:2022); German version EN ISO 11114-5:2022
DIN EN 1186-11:2002-12 Materials and articles in contact with foodstuffs - Plastics - Part 11: Test methods for overall migration into mixtures of <(hoch)14>C-labelled synthetic triglycerides; German version EN 1186-11:2002
DIN EN ISO 10722:2020-03 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method) (ISO 10722:2019); German version EN ISO 10722:2019
DIN EN 15284:2007-07 Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastic cookware; German version EN 15284:2007
DIN EN 16105:2023-04 Paints and varnishes - Laboratory method for determination of release of regulated dangerous substances from coatings in intermittent contact with water; German version EN 16105:2023
DIN EN 2243-2:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal; German and English version EN 2243-2:2005
DIN EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
DIN EN 15284:2007 Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastic cookware; Germang version EN 15284:2007
DIN EN 16581:2015-03 Conservation of Cultural Heritage - Surface protection for porous inorganic materials - Laboratory test methods for the evaluation of the performance of water repellent products; German version EN 16581:2014
DIN EN 2243-4:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 4: Metal-honeycomb core flatwise tensile test; German and English version EN 2243-4:2005
DIN EN 12980:2000 Materials and articles in contact with foodstuffs - Non-metallic articles for catering and industrial use - Method of test for the determination of impact resistance; German version EN 12980:2000
DIN EN 12980:2015-02 Materials and articles in contact with foodstuffs - Non-metallic articles for catering and industrial use - Method of test for the determination of impact resistance; German version EN 12980:2000

国家市场监督管理总局、中国国家标准化管理委员会, 3. Experimental materials and methods

GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）
GB/T 20671.6-2020 Classification system and test methods for nonmetallic gasket materials—Part 6: Standard test method for adhesion of gasket materials to metal surfaces

Guangxi Provincial Standard of the People's Republic of China, 3. Experimental materials and methods

DB45/T 1423-2016 Detection and characterization methods of graphene three-dimensional structure powder materials

Professional Standard - Aerospace, 3. Experimental materials and methods

QJ 2305-1992 Test method for tensile properties of three-dimensional carbon/carbon composite materials
QJ 2099-1991 Test method for flexural properties of three-dimensional fiber reinforced composite materials

British Standards Institution (BSI), 3. Experimental materials and methods

BS EN 12802:2011 Road marking materials. Laboratory methods for identification
18/30382612 DC BS EN 12802. Road marking materials. Laboratory methods for identification
BS EN 1186-11:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration into mixtures of C-labelled synthetic triglycerides
BS EN 993-3:1997 Methods of test for dense shaped refractory products - Test methods for carbon-containing refractories
BS 6401:1983 Method for measurement, in the laboratory, of the specific optical density of smoke generated by materials
BS ISO 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
BS 1902 Sec.7.2:1987 Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Testing of material as supplied and received (method 1902-702)
BS 2782-7 Method 720B:1979 Methods of testing plastics - Rheological properties - Cup flow of phenolic and alkyd moulding materials
DD ENV 13258-1999 Materials and articles in contact with foodstuffs. Test methods for crazing resistance of ceramic articles
BS EN 1186-12:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration at low temperatures
BS EN 1184:1997 Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles
BS 6233:1982 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
BS EN 1217:1998 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles
BS 6043-3.5.1:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method
BS 1902 Sec.5.14:1992 Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal expansion (temperatures up to 1500C) (methods 1902-5.14)
BS EN 1186-13:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration at high temperatures
BS EN 1186-14:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for 'substitute tests' for overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95% ethanol
BS EN ISO 11114-5:2022 Gas cylinders. Compatibility of cylinder and valve materials with gas contents - Test methods for evaluating plastic liners
19/30388629 DC BS ISO 3865. Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material
BS ISO 11561:1999 Ageing of thermal insulation materials - Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
BS 1902 Sec.7.0:1987 Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Introduction and definitions
BS EN 1186-1:2002 Materials and articles in contact with foodstuffs - Plastics - Guide to the selection of conditions and test methods for overall migration
BS ISO 23832:2021 Plastics. Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions
BS EN ISO 11114-4:2007 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Test methods for selecting metallic materials resistant to hydrogen embrittlement
BS EN 993-17:1999 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the mercury method with vacuum
20/30393744 DC BS ISO 23832. Plastics. Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions
BS IEC 61189-5-4:2015 Test methods for electrical materials, printed boards and other interconnection structures and assemblies. General test methods for materials and assemblies. Solder alloys and fluxed and non-fluxed solid wire for printed board assemblie
BS EN 1183:1997 Materials and articles in contact with foodstuffs - Test methods for thermal shock and thermal shock endurance
BS EN 1186-2:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration into olive oil by total immersion
BS 1902 Sec.7.3:1987 Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Preparation of test pieces from dense castables by vibration (method 1902-703)
BS 1902-3.11:1983 Methods of testing refractory materials - General and textural properties - Measurement of dimensions and shape of refractory bricks and blocks (methods 1902-311)
BS EN 15284:2007 Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastic cookware
BS EN 1186-4:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration into olive oil by cell
BS EN 1186-8:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration into olive oil by article filling
BS 6043-4.13:1991 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of ash of baked rammed paste
BS 476-12:1991 Fire tests on building materials and structures - Method of test for ignitability of products by direct flame impingement
BS 5131 Sec.6.1:1981 Methods of test for footwear and footwear materials. Codes of practice. Code of practice for the comparative evaluation by wear trial of materials, components or constructions
BS EN 1186-6:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration into olive oil using a pouch
BS EN ISO 10722:2019 Geosynthetics. Index test procedure for the evaluation of mechanical damage under repeated loading. Damage caused by granular material (laboratory test method)
BS EN 16581:2014 Conservation of Cultural Heritage. Surface protection for porous inorganic materials. Laboratory test methods for the evaluation of the performance of water repellent products
BS 1902-5.14:1992 Methods of testing refractory materials - Refractory and thermal properties - Determination of thermal expansion (temperatures up to 1500 °C) (methods 1902-5.14)
BS EN 1186-10:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration into olive oil (modified method for use in cases where incomplete extraction of olive oil occurs)
BS EN 1186-3:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration into aqueous food simulants by total immersion
BS EN 1186-3:2022 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration into aqueous food simulants by total immersion
BS EN 1186-9:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration into aqueous food simulants by article filling
BS EN 1186-5:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration into aqueous food simulants by cell
20/30392820 DC BS EN ISO 11114-5. Gas cylinders. Compatibility of cylinder and valve materials with gas contents. Part 5. Test methods for evaluating plastic liners
BS 4735:1974 Laboratory method of test for assessment of the horizontal burning characteristics of specimens no larger than 150 mm x 50 mm x 13 mm (nominal) of cellular plastics and cellular rubber materials when subjected to a small flame
18/30338840 DC BS EN ISO 10722. Geosynthetics. Index test procedure for the evaluation of mechanical damage under repeated loading. Damage caused by granular material (Laboratory test method)
21/30432862 DC BS EN 16105. Paints and varnishes. Laboratory method for determination of release of regulated dangerous substances from coatings in intermittent contact with water
BS 6043-1.3:1983 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of softening point (ring and ball method)

European Committee for Standardization (CEN), 3. Experimental materials and methods

EN 12802:2000 Road Marking Materials - Laboratory Methods for Identification
EN 12802:2011 Road marking materials - Laboratory methods for identification
EN 14481:2003 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
EN 1184:1997 Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles
DD ENV 13258-1998 Materials and Articles in Contact with Foodstuffs - Test Methods for Crazing Resistance of Ceramic Articles
PD CEN/TS 15397:2006 Wood preservatives - Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test
DD ENV 1186-13-1999 Materials and Articles in Contact with Foodstuffs - Plastics - Part 13: Test Method for Overall Migration at High Temperatures
EN 1183:1997 Materials and articles in contact with foodstuffs - Test methods for thermal shock and thermal shock endurance
EN 1217:1997 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles
DD ENV 1186-11-1995 Materials and Articles in Contact with Foodstuffs - Plastics - Part 11: Test Methods for Overall Migration into Mixtures of 14C-Labelled Synthetic Triglycerides
EN ISO 11114-4:2005 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement
EN ISO 11114-5:2022 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 5: Test methods for evaluating plastic liners (ISO 11114-5:2022)
EN 1186-11:2002 Materials and articles in contact with foodstuffs - Plastics - Part 11: Test methods for overall migration into mixtures of C-labelled synthetic triglycerides
PD CEN/TS 14235:2002 Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overall migration
EN 16105:2023 Paints and varnishes - Laboratory method for determination of release of regulated dangerous substances from coatings in intermittent contact with water
EN 15284:2007 Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastics cookware
EN ISO 22403:2021 Plastics - Assessment of the intrinsic biodegradability of materials exposed to marine inocula under mesophilic aerobic laboratory conditions - Test methods and requirements (ISO 22403:2020)
PD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
EN 2243-2:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal
EN ISO 16808:2022 Metallic materials - Sheet and strip - Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems (ISO 16808:2022)
EN 12980:2000 Materials and articles in contact with foodstuffs - Non-metallic articles for catering and industrial use - Method of test for the determination of impact resistance

Association Francaise de Normalisation, 3. Experimental materials and methods

NF P98-604*NF EN 12802:2012 Road marking materials - Laboratory methods for identification.
NF P94-040:1993 Soils : investigation and testing. Practical method for identifying the 0/50 mm fraction of a granular material. Determination of particle size and blue value.
NF S10-200*NF ISO 17328:2022 Optics and photonics - Optical materials and components - Test method for refractive index of infrared optical materials
PR EN 3641:1994 Aerospace series - Test methods - Heat resisting alloys compacted materiel
NF S10-024*NF ISO 22531:2020 Optics and photonics - Optical materials and components - Test method for climate resistance of optical glass
NF D25-113*NF EN 14481:2003 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
NF D25-101-11*NF EN 1186-11:2003 Materials and articles in contact with foodstuffs - Plastics - Part 11 : test methods for overall migration into mixtures of 14C-labelled synthetic triglycerides
NF EN 1186-11:2003 Matériaux et objets en contact avec les denrées alimentaires - Matière plastique - Partie 11 : méthodes d'essai pour la migration globale dans des mélanges de triglycérides synthétiques marqués au 14C
NF EN 12697-32:2019 Matériaux enrobés - Méthodes d'essai - Partie 32 : confection d'éprouvettes par compacteur vibratoire
AC T51-808:2012 Plastiques - Évaluation expérimentale de l'oxobiodégradabilité de matériaux polyoléfiniques sous forme de films - Méthodologie et exigences
NF EN ISO 10722:2019 Géosynthétiques - Mode opératoire d'essai pour évaluer l'endommagement mécanique sous charge répétée - Endommagement causé par des matériaux granulaires (méthode d'essai en laboratoire)
NF EN 1217:1998 Matériaux et objets en contact avec les denrées alimentaires - Méthodes d'essai pour l'absorption d'eau par les objets en céramique
NF EN 1183:1997 Matériaux et objets en contact avec les denrées alimentaires - Méthodes d'essai pour le choc thermique et la résistance au choc thermique
NF EN 13258:2003 Matériaux et articles en contact avec les denrées alimentaires - Méthodes d'essai de la résistance au tressaillage des articles en céramique
NF EN 14734:2022 Durabilité du bois et des matériaux dérivés du bois - Détermination de l'imprégnabilité d'essences de bois par des produits de préservation - Méthode de laboratoire
NF G38-123*NF EN ISO 10722:2019 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method)
NF D21-625*NF EN 13258:2003 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles.
NF ISO 22531:2020 Optique et photonique - Matériaux et composants optiques - Méthode d'essai pour la résistance climatique du verre optique
NF D21-313*NF EN 15284:2007 Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastic cookware
NF B40-305*NF EN 993-13:1995 Methods of test for dense shaped refractory products. Part 13 : specification for pyrometric reference cones for laboratory use.
NF EN 1184:1997 Matériaux et objets en contact avec les denrées alimentaires - Méthodes d'essai visant à déterminer la translucidité des objets en céramique
NF E29-648-4:2006 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4 : test methods for selecting metallic materials resistant to hydrogen embrittlement.
NF EN ISO 11114-4:2017 Bouteilles à gaz transportables - Compatibilité des matériaux et des robinets avec les contenus gazeux - Partie 4 : Méthodes d'essai pour le choix de matériaux métalliques résistants à la fragilisation par l'hydrogène
NF B38-510-2*NF EN 12971-2:1999 Reinforcements. Specification for textile glass chopped strands. Part 2 : test methods and general requirements.
NF ISO 3865:2020 Caoutchouc vulcanisé ou thermoplastique - Méthodes d'essai pour déterminer le tachage lors du contact avec des matières organiques
NF D25-101-6*NF EN 1186-6:2003 Materials and articles in contact with foodstuffs - Plastics - Part 6 : test methods for overall migration into olive oil using a pouch.
NF D25-101-12*NF EN 1186-12:2003 Materials and articles in contact with foodstuffs - Plastics - Part 12 : test methods for overall migration at low temperatures.
NF D25-101-13*NF EN 1186-13:2003 Materials and articles in contact with foodstuffs - Plastics - Part 13 : test method for overall migration at high temperatures
NF E29-648-5*NF EN ISO 11114-5:2022 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 5 : test methods for evaluating plastic liners
NF EN ISO 11114-5:2022 Bouteilles à gaz - Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux - Partie 5 : méthodes d'essai pour l'évaluation des liners en plastique
NF D25-101-4*NF EN 1186-4:2003 Materials and articles in contact with foodstuffs - Plastics - Part 4 : test methods for overall migration into olive oil by cell.
NF D25-101-2*NF EN 1186-2:2003 Materials and articles in contact with foodstuffs - Plastics - Part 2 : test methods for overall migration into olive oil by total immersion.
NF X80-028*NF EN 16581:2015 Conservation of Cultural Heritage - Surface protection for porous inorganic materials - Laboratory test methods for the evaluation of the performance of water repellent products
NF C32-020:1981 Insulated cables and flexible cords. Test methods for insulations and sheaths of electric cables and cords (elastomeric and thermoplastic compounds).
NF B42-001-9:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 9 : determination of un-tamped bulk density.
NF D25-101-8*NF EN 1186-8:2003 Materials and articles in contact with foodstuffs - Plastics - Part 8 : test methods for overall migration into olive oil by article filling.
NF D25-101-7*NF EN 1186-7:2003 Materials and articles in contact with foodstuffs - Plastics - Part 7 : test methods for overall migration into aqueous food simulants using a pouch
NF P98-114-3:2001 Roadway foundations - Methodology for laboratory study of materials treated with hydraulic binders - Part 3 : soils treated with hydraulic binders possibly combined with lime.
NF P98-114-3:2009 Road foundations - Methodology for laboratory study of materials treated with hydraulic binders - Part 3 : soils treated with hydraulic binders possibly combined with lime
NF A05-120*NF ISO 21608:2012 Corrosion of metals and alloys - Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials.
NF EN 16105:2023 Peintures et vernis - Méthode de laboratoire pour la détermination de la libération de substances dangereuses réglementées provenant de revêtements en contact avec l'eau par intermittence
NF C20-790-4-5:2004 Electrostatics - Part 4-5 : standard test methods for specific applications - Methods for characterising the electrostatic protection of footwear and flooring in combination with a person.
NF EN 2243-2:2006 Série aérospatiale - Matériaux non-métalliques - Système d'adhésifs structuraux - Méthodes d'essai - Partie 2 : essai de pelage métal-métal
NF D25-101-1*NF EN 1186-1:2003 Materials and articles in contact with foodtsuffs - Plastics - Part 1 : guide to the selection of conditions and test methods for overall migration
XP D25-301*XP CEN/TS 14235:2003 Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overall migration
NF D25-101-9*NF EN 1186-9:2003 Materials and articles in contact with foodstuffs - Plastics - Part 9 : test methods for overall migration into aqueous food simulants by article filling.
NF D25-101-3*NF EN 1186-3:2003 Materials and articles in contact with foodstuffs - Plastics - Part 3 : test methods for overall migration into aqueous food simulants by total immersion
NF D25-101-5*NF EN 1186-5:2003 Materials and articles in contact with foodstuffs - Plastics - Part 5 : test methods for overall migration into aqueous food simulants by cell
NF EN 16581:2015 Conservation du patrimoine culturel - Protection de surface des matériaux inorganiques poreux - Méthodes d'essai en laboratoire pour l'évaluation des performances des produits hydrofuges
NF EN ISO 3582/A1:2008 Matières alvéolaires polymères souples - Méthode de laboratoire pour la détermination des caractéristiques de combustion de petites éprouvettes soumises, en position horizontale, à une petite flamme
NF EN ISO 3582:2002 Matières alvéolaires polymères souples - Méthode de laboratoire pour la détermination des caractéristiques de combustion de petites éprouvettes soumises, en position horizontale, à une petite flamme
NF EN 12404:2020 Durabilité du bois et des matériaux dérivés du bois - Évaluation de l'efficacité d'un fongicide de maçonnerie pour empêcher le développement dans le bois de la mérule Serpula lacrymans (Schumacher ex Fries) S.F. Gray - Méthode de laboratoire
XP CEN/TS 15397:2006 Produits de préservation du bois - Méthode de préconditionnement naturel d'éprouvettes de bois traité, sans contact avec le sol, avant essai biologique en laboratoire
XP X41-550:2009 Termites - Détermination de l'efficacité anti-termites de produits et de matériaux destinés à être utilisés comme barrières Sol et/ou Murs - Méthode de laboratoire

Danish Standards Foundation, 3. Experimental materials and methods

DS/EN 12802:2012 Road marking materials - Laboratory methods for identification
DS/ISO 3865:1985 Rubber, vulcanized. Methods of test for staining in contact with organic material
DS/EN ISO 12017:1997 Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods
DS/ISO 13957:1998 Plastics pipes and fittings - Polyethylene (PE) tapping tees - Test method for impact resistance
DS/EN 2310:1991 Aerospace series. Test methods for the flame resistance rating of non-metallic materials
DS/EN 14481:2003 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
DS/EN 1186-11:2002 Materials and articles in contact with foodstuffs - Plastics - Part 11: Test methods for overall migration into mixtures of C-labelled synthetic triglycerides
DS/EN 1183:1998 Materials and articles in contact with foodstuffs - Test methods for thermal shock and thermal shock endurance
DS/EN 1217:1998 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles
DS/EN 13258:2003 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles
DS/EN 1184:1998 Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles
DS/EN 1186-12:2002 Materials and articles in contact with foodstuffs - Plastics - Part 12: Test methods for overall migration at low temperatures
DS/EN 1186-13:2002 Materials and articles in contact with foodstuffs - Plastics - Part 13: Test methods for overall migration at high temperatures
DS/ISO 23832:2021 Plastics – Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions
DS/EN 1186-1:2002 Materials and articles in contact with foodstuffs - Plastics - Part 1: Guide to the selection of conditions and test methods for overall migration
DS/EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
DS/EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
DS/EN ISO 11114-4:2005 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement
DS/EN 15284:2007 Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastics cookware
DS/EN 1186-4:2002 Materials and articles in contact with foodstuffs - Plastics - Part 4: Test methods for overall migration into olive oil by cell
DS/CEN/TS 14235:2003 Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overall migration
DS/EN 1186-2:2002 Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration into olive oil by total immersion
DS/EN 1186-8:2002 Materials and articles in contact with foodstuffs - Plastics - Part 8: Test methods for overall migration into olive oil by article filling
DS/EN 12980:2000 Materials and articles in contact with foodstuffs - Non-metallic articles for catering and industrial use - Method of test for the determination of impact resistance

Lithuanian Standards Office , 3. Experimental materials and methods

LST EN 12802-2011 Road marking materials - Laboratory methods for identification
LST EN 14481-2004 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
LST EN 1186-11-2002 Materials and articles in contact with foodstuffs - Plastics - Part 11: Test methods for overall migration into mixtures of C-labelled synthetic triglycerides
LST EN 1183-2000 Materials and articles in contact with foodstuffs - Test methods for thermal shock and thermal shock endurance
LST EN 1217-2000 Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles
LST EN 13258-2004 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles
LST EN 1184-2000 Materials and articles in contact with foodstuffs - Test methods for translucency of ceramic articles
LST EN 1186-12-2002 Materials and articles in contact with foodstuffs - Plastics - Part 12: Test methods for overall migration at low temperatures
LST EN 1186-13-2002 Materials and articles in contact with foodstuffs - Plastics - Part 13: Test methods for overall migration at high temperatures
LST EN 1186-1-2002 Materials and articles in contact with foodstuffs - Plastics - Part 1: Guide to the selection of conditions and test methods for overall migration
LST EN 993-18-2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
LST EN 993-17-2001 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
LST EN 15284-2007 Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastics cookware
LST EN 1186-4-2002 Materials and articles in contact with foodstuffs - Plastics - Part 4: Test methods for overall migration into olive oil by cell
LST EN ISO 11114-4:2005 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement (ISO 11114-4:2005)
LST EN 1186-8-2002 Materials and articles in contact with foodstuffs - Plastics - Part 8: Test methods for overall migration into olive oil by article filling
LST EN 1186-2-2002 Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration into olive oil by total immersion
LST EN 12980-2000 Materials and articles in contact with foodstuffs - Non-metallic articles for catering and industrial use - Method of test for the determination of impact resistance

AENOR, 3. Experimental materials and methods

UNE-EN 12802:2012 Road marking materials - Laboratory methods for identification
UNE-EN 14481:2004 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
UNE-EN 993-18:2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum.

CEN - European Committee for Standardization, 3. Experimental materials and methods

PREN 12802-2018 Road marking materials - Laboratory methods for identification

Professional Standard - Public Safety Standards, 3. Experimental materials and methods

GA 111-1995 Solid room fire test method for surface materials

Professional Standard - Machinery, 3. Experimental materials and methods

JB/T 7901-1999 Metals materials - Uniform corrosion - Methods of laboratory immersion testing

Korean Agency for Technology and Standards (KATS), 3. Experimental materials and methods

KS P ISO 10271:2004 Dentistry－Determination of tarnish and corrosion of metal and alloys
KS M 2256-2007(2022) Testing method for solubility of bituminous materials in trichloroethane
KS I ISO 2943-2005(2020) Hydraulic fluid power－Filter elements－Verification of material compatibility with fluids
KS B ISO 12123:2006 Raw optical glass in bulk and preshaped forms-Bubblesand other inclusions-Test method and classification
KS B ISO 12123:2016 Raw optical glass in bulk and preshaped forms－Bubblesand other inclusions－Test method and classification
KS F 2496-2012 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS M ISO 11561-2009(2019) Ageing of thermal insulation materials－Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods)
KS M ISO 3865:2010 Rubber, vulcanized or thermoplastic-Methods of test for staining in contact with organic material
KS K 0405-2021 Test method for coefficient of friction of yarn: Yarn to solid material
KS K ISO 10722:2022 Geosynthetics — Index test procedure for the evaluation of mechanical damage under repeated loading —Damage caused by granular material(laboratory test method)
KS M ISO 3865-2010(2021) Rubber, vulcanized or thermoplastic－Methods of test for staining in contact with organic material
KS K 0828-2016 Test method for quantitative analysis of composition of blended filling materialsdown and feathers blended with polyester
KS F 2865-2012 Laboratory measurements of the reduction of transmitted impact sound by floor coverings on a heavyweight standard floor
KS K 0828-2016(2021) Test method for quantitative analysis of composition of blended filling materialsdown and feathers blended with polyester
KS C 2134-1996(2021) Testing method for dissipation factor and permittivity parallel with laminations of laminated sheet and plate materials
KS C IEC 61340-4-5:2007 Electrostatics－Part 4－5：Standard test methods for specific applications－Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person
KS C IEC 60811-409:2015 Electric and optical fibre cables — Test methods for non-metallic materials — Part 409: Miscellaneous tests — Loss of mass test for thermoplastic insulations and sheaths

Professional Standard - Electricity, 3. Experimental materials and methods

DL/T 902-2004 Technical requirements and test methods of abrasion resistant refractory material

Society of Automotive Engineers (SAE), 3. Experimental materials and methods

SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test
SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test

SE-SIS, 3. Experimental materials and methods

SIS 65 00 31-1959

American National Standards Institute （ANSI), 3. Experimental materials and methods

ANSI/ASTM D3345:1996 Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites
ANSI/ASTM F2875:2010 Guide for Laboratory Requirements Necessary to Test Commercial Cooking Appliances to ASTM Test Methods
ANSI N15.51-2007 Methods of Nuclear Material Control - Measurement Control Program – Nuclear Materials Analytical Chemistry Laboratory (Institute for Nuclear Materials Management (INMM))
ANSI/ASTM E906:2010 Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
ANSI/NFSI B101.3-2012 Test Method for Measuring Wet DCOF of Common Hard-Surface Floor Materials (Including Action and Limit Thresholds for the Suitable Assessment of the Measured Values)
ANSI/ASTM D7066:2004 Test Method for Dimer/Trimer of Chlorotrifluoroethylene (s-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
ANSI/ASTM D2520:2013 New Standard Test Methods for Complex Permittivity Dielectric Constant of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures of 1650 C

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, 3. Experimental materials and methods

GB/T 14041.2-1993 Hydraulic fluid power.Filter elements.Verification of material compatibility with fluids
GB/T 7286.1-1987 Test Method for total normal emittance of metals and nonmetallic materials
GB/T 24176-2009 Metallic materials.Fatigue testing.Statistical planning and analysis of data
GB/T 7286.2-1987 Test method for normal spectral emittance of metals and nonmetallic materials
GB/T 20671.6-2006 Classification system and test methods for nonmetallic gasket materials-Part6:Standard test method for adhesion of gasket materials to metal surfaces
GB/T 14041.2-2007 Hydraulic fluid power Filter elements Part 2 : Verification of material compatibility with fluids
GB/T 42764-2023 Test methods and requirements for the evaluation of the intrinsic aerobic biodegradability of plastic materials exposed to marine inoculum under laboratory mesothermal conditions
GB/T 28876.2-2014 Flammability of materials in space experimental facilities.Part 2:Test methods
GB/T 13477.19-2002 Test method for building sealants Part 19: Determination of change in mass and volume
GB/T 25965-2010 Test methods of normal emittance of materials and hemispherical emittance of all-glass evacuated collector tubes
GB/T 34542.2-2018 Storage and transportation systems for gaseous hydrogen.Part 2:Test methods for evaluating metallic material compatibility in hydrogen atmosphere
GB/T 11189.2-1989 Operating light-exposure apparatus(carbon-arc type) with and without water and testing method for exposure of nonmetallic materials
GB/T 11189.1-1989 Operating light-exposure apparatus(xenon-arc type) with and without water and testing method for exposure of nonmetallic materials

Professional Standard - Textile, 3. Experimental materials and methods

FZ/T 60041-2014 3D braided polymer matrix composites.Test method for tensile properties
FZ/T 60042-2014 3D braided polymer matrix composites.Test method for bending properties
FZ/T 60043-2014 3D braided polymer matrix composites.Test method for compression properties
FZ/T 60043-2013 Test method for compressive properties of resin-based three-dimensional braided composites
FZ/T 60042-2013 Test method for flexural properties of resin-based three-dimensional braided composites
FZ/T 60041-2013 Test method for tensile properties of resin-based three-dimensional braided composites

American Society for Testing and Materials (ASTM), 3. Experimental materials and methods

ASTM D2042-01 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
ASTM D2042-97 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
ASTM D2042-09 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
ASTM D2042-15 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
ASTM C461-81(2003) Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
ASTM D3345-08 Standard Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites
ASTM D3108-01 Standard Test Method for Coefficient of Friction, Yarn to Solid Material
ASTM D3108-95 Standard Test Method for Coefficient of Friction, Yarn to Solid Material
ASTM D3108/D3108M-13(2020) Standard Test Method for Coefficient of Friction, Yarn to Solid Material
ASTM F607-03(2019) Standard Test Method for Adhesion of Gasket Materials to Metal Surfaces
ASTM D310-88 Standard test method for coefficient of friction between yarn and solid materials
ASTM C802-96(2002) Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-96 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-96(2008)e1 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-09 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-09a Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-14 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C135-96(2022) Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
ASTM D5744-18 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D5744-13 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D5744-13e1 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D3345-74(1999) Standard Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites
ASTM C461-81(2008) Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
ASTM C461-81(2015) Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
ASTM D7811-13 Standard Test Method for Bow and Skew Using a Measuring Tool
ASTM C802-14(2022) Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C1067-00(2007) Standard Practice for Conducting A Ruggedness or Screening Program for Test Methods for Construction Materials
ASTM C1067-00 Standard Practice for Conducting A Ruggedness or Screening Program for Test Methods for Construction Materials
ASTM D5744-12 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D2042-22 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene or Toluene
ASTM C604-02(2007) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM C604-02 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM C604-98 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM C604-02(2007)e1 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D2512-95(2002) Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques)
ASTM D2512-95 Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques)
ASTM D5744-07 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D5819-99 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D5819-21 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D5819-18 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D5819-05(2016) Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM E477-13 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
ASTM D5009-02(2011) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D3455-11(2019) Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin
ASTM D2512-95(2008) Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques)
ASTM D4445-23 Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ASTM F748-06 Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
ASTM D6704-08(2015) Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
ASTM C1363-05 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM C1363-11 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM D470-05 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
ASTM D470-13 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
ASTM D6902-04(2011) Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
ASTM D6902-04(2023) Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
ASTM D790-17 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM C384-98 Standard Test Method for Impedance and Absorption of Acoustical Materials by the Impedance Tube Method
ASTM C384-04(2022) Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
ASTM D6704-01 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
ASTM D6704-08 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
ASTM F748-16 Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
ASTM D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM C604-02(2012) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D4289-03 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D790-15 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D790-15e2 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM C384-03 Standard Test Method for Impedance and Absorption of Acoustical Materials by the Impedance Tube Method
ASTM C384-04 Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
ASTM C384-04(2011) Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
ASTM F748-06(2010) Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
ASTM D1670-98 Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
ASTM C1519-02 Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C1519-02a Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C1519-10(2022) Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM D146-97 Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
ASTM D146-97e1 Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
ASTM F955-15(2021) Standard Test Method for Evaluating Heat Transfer Through Materials for Protective Clothing Upon Contact with Molten Substances
ASTM D6902-04(2017) Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
ASTM D7066-04 Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
ASTM C670-03 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM C670-10 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM C670-13 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM C670-15 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM C1067-12 Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D1670-04 Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
ASTM D1670/D1670M-04(2011)e1 Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
ASTM D7349/D7349M-15 Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners
ASTM D1670/D1670M-11 Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
ASTM F2701-08 Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with a Hot Liquid Splash
ASTM E906/E906M-14 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
ASTM D6341-21 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F (–34.4 and 60°C)
ASTM D4799-03 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
ASTM D4799-08 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
ASTM C670-96 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM D7133-05 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
ASTM D7066-04e1 Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
ASTM C1501-01 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM C1501-09 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM C1501-14 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM C1294-01 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
ASTM C1294-95 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
ASTM B114-07 Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
ASTM B114-07(2013) Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
ASTM D7133-16 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
ASTM D7133-21 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
ASTM D779-16 Standard Test Method for Determining the Water Vapor Resistance of Sheet Materials in Contact with Liquid Water by the Dry Indicator Method
ASTM D2861-87(2004) Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
ASTM D1686-96(2004) Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
ASTM D7913/D7913M-14(2020) Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
ASTM F2331-11(2016) Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials
ASTM D7066-04(2011) Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
ASTM D7687-11 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel, Fuel/Water Mixtures, and Fuel-Associated Water with Sample Concentration by Filtration
ASTM E2965-15 Standard Test Method for Determination of Low Levels Heat Release Rate for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E2965-16 Standard Test Method for Determination of Low Levels of Heat Release Rate for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E2437-05 Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and Related Materials
ASTM F144-80(2010) Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods
ASTM D2861-14 Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
ASTM E1354-14 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-15a Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-16 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM D7888-13 Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings
ASTM D1331-14 Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials
ASTM E2438-05 Standard Practice for Implementing Standard Performance Based Test Methods for the Analysis of Metals, Ores, and Related Materials
ASTM E477-13e1 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
ASTM E477-20 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
ASTM F2331-11 Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials
ASTM D6708-16a Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM E2410-04 Standard Practice for Designing and Validating Performance Based Test Methods for the Analysis of Metals, Ores, and Related Materials (Withdrawn 2006)

TH-TISI, 3. Experimental materials and methods

TIS 1203-1993 Standard test method for solubility of bituminous meterials in trichloroethylene

BE-NBN, 3. Experimental materials and methods

NBN-EN 28233-1992
NBN T 31-035-1985 Rubber, vulcanized - Methods of test for staining in contact with organic material
NBN-EN 348-1993 Protective clothing. Test method: Determination of behaviour of materials on impact of small splashes of molten metal
NBN-EN 2155-9-1992
NBN-EN 2155-3-1993 Aerospace series. Test methods for transparent materials for aircraft glazing. Part 3: Determination of refractive index
NBN-EN 2155-14-1993 Aerospace series. Test methods for transparent materials for aircraft glazing. Part 14: Determination of the 1/10 Vicat softening temperature
NBN-EN 2155-8-1992

ANSI - American National Standards Institute, 3. Experimental materials and methods

N15.51-2007 Methods of Nuclear Material Control - Measurement Control Program – Nuclear Materials Analytical Chemistry Laboratory (INMM)

Standard Association of Australia （SAA）, 3. Experimental materials and methods

AS 5101.4:2008 Methods for preparation and testing of stabilized materials - Unconfined compressive strength of compacted materials
AS 5101.5:2008 Methods for preparation and testing of stabilized materials - Absorption, swell and capillary rise of compacted materials
AS 1141.52:2008 Methods for sampling and testing aggregates - Unconfined cohesion of compacted pavement materials

HU-MSZT, 3. Experimental materials and methods

MSZ 2989-1963

Anhui Provincial Standard of the People's Republic of China, 3. Experimental materials and methods

DB34/T 2987-2017 Experimental method for thermal physical properties of thermal insulation materials (constant temperature plane heat source method)

ES-AENOR, 3. Experimental materials and methods

UNE 104-281 Pt.2-3-1986
UNE 104-281 Pt.2-6-1986
UNE 104-281 Pt.2-4-1986
UNE 104-281 Pt.2-2-1986
UNE 104-281 Pt.2-1-1986
UNE 135-360-1994 Vertical road traffic signs. Signing of guiding traffic. Junction marker in the polymeric material. Characteristics, dimensions and test methods

International Organization for Standardization (ISO), 3. Experimental materials and methods

ISO 3865:1977 Title missing - Legacy paper document
ISO 3865:1983 Rubber, vulcanized - Methods of test for staining in contact with organic material
ISO 15912:2006/Amd 1:2011 Dentistry - Casting investments and refractory die materials; Amendment 1: Requirement and test method for adequacy of expansion of Type 1 and Type 2 materials
ISO/PRF 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
ISO 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
ISO 3865:2020 Rubber, vulcanized or thermoplastic — Methods of test for staining in contact with organic material
ISO 15527:2010 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods
ISO 23409:2011 Male condoms - Requirements and test methods for condoms made from synthetic materials
ISO 10722:2019 Geosynthetics — Index test procedure for the evaluation of mechanical damage under repeated loading — Damage caused by granular material (laboratory test method)
ISO 23832:2021 Plastics - Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions
ISO 11114-4:2005 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement
ISO 11114-5:2022 Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 5: Test methods for evaluating plastic liners
ISO 15015:2011 Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods
ISO 22403:2020 Plastics — Assessment of the intrinsic biodegradability of materials exposed to marine inocula under mesophilic aerobic laboratory conditions — Test methods and requirements

Professional Standard - Aviation, 3. Experimental materials and methods

HB 5477-1991 Rapid test method for contact corrosion of non-metallic and metallic materials
HB 7655-1999 Forced non-resonant test method for dynamic mechanical properties of plastics and composites
HB 5434.10-2004 Test methods for aircraft wheel friction materials-Part 10:Inspection method for bonding ability between friction material and steel base and plasticity of steel base
HB 5434.10-1989 Test method for bonding quality between aircraft wheel brake material and steel backing and plasticity of steel backing after sintering

IT-UNI, 3. Experimental materials and methods

UNI EN ISO 12017:2021 Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods

Professional Standard - Nuclear Industry, 3. Experimental materials and methods

EJ/T 20198-2018 Preparation method of emergency response plan for physical protection of nuclear materials and nuclear facilities

JSAE - Society of Automotive Engineers of Japan@ Inc., 3. Experimental materials and methods

JASO M344-1992 Compatibility test method of automotive gear oil with rubber seal materials
JASO M357-2001 Road vehicles - Test method for compatibility of automatic transmission fluids with wet friction materials

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, 3. Experimental materials and methods

GB/T 33621-2017 Test method for bending properties of 3D braided fabric and its polymer matrix composites
GB/T 33613-2017 Test method for tensile properties of 3D braided fabric and its polymer matrix composites
GB/T 33614-2017 Test method for compression properties of 3D braided fabric and its polymer matrix composites
GB/T 13477.19-2017 Test method for building sealants—Part 19：Determination of change in mass and volume

AWS - American Welding Society, 3. Experimental materials and methods

D8.9M-2012 Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials (Third Edition)

American Welding Society (AWS), 3. Experimental materials and methods

AWS D8.9M-2012 Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials (Third Edition)

国家药监局, 3. Experimental materials and methods

YY/T 1777-2021 Technical requirements and test methods for male condoms made of synthetic materials

Canadian General Standards Board （CGSB), 3. Experimental materials and methods

CGSB 1-GP-71 METH 98.3-1982 Methodes D'Essai Des Peintures Et Pigments Revetement Des Plaques En Metal Et En Verre Aux Fins D'Essai
CGSB 2.11-94 31.2-CAN/CGSB-1994 Methods of Sampling and Testing Soaps and Detergents Determination of the Rinsing Properties of Materials Used in Building Maintenance

未注明发布机构, 3. Experimental materials and methods

BS ISO 11561:1999(2000) Ageing of thermal insulation materials — Determination of the long - term change in thermal resistance of closed - cell plastics (accelerated laboratory test methods)

Professional Standard - Commodity Inspection, 3. Experimental materials and methods

SN/T 1492-2015 Standard practice for laboratory bias evaluation using single test result from standard material
SN/T 1492-2004 Standard practice for laboratory bias evaluation using single test result from standard material
SN/T 3386-2012 Food contact materials.Polymers.Test methods for overall migration into mixtures of 14C-labelled synthetic triglycerides
SN/T 3062.3-2011 Packaging materials for terminally sterilized medical devices for import. Part 3:Sealable pouches and reels of porous materials and plastic film construction. Requirements and test methods
SN/T 2284-2009 Food contact materials.Polymer materials.Method for determination of overall migration.Substitute tests:Overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95% ethanol

CZ-CSN, 3. Experimental materials and methods

CSN 64 5464-1978 Cellulav plastics and cellular rubber atcrials. Laboratory method of test to ssess the horizontál burning haracleristics
CSN 03 8145-1992 Corrosion protection. Non-metallic polymere materials. Methods of laboratory and accelerated tests of corrosivity

KR-KS, 3. Experimental materials and methods

KS K ISO 10722-2022 Geosynthetics — Index test procedure for the evaluation of mechanical damage under repeated loading —Damage caused by granular material(laboratory test method)
KS C IEC 61189-5-4-2023 Test methods for electrical materials, printed boards and other interconnection structures and assemblies — Part 5-4: General test methods for materials and assemblies — Solder alloys and fluxed and n

ES-UNE, 3. Experimental materials and methods

UNE-EN 13258:2003 Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles.
UNE-ISO 3865:2016 Rubber vulcanized or thermoplastic. Methods of test for staining in contact with organic material
UNE-EN 1186-11:2003 Material and articles in contact with foodstuffs. Plastics. Part 11: Test methods for overall migration into mixtures of C-labelled synthetic triglycerides.
UNE-EN ISO 10722:2020 Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method) (ISO 10722:2019)
UNE-EN 15284:2007 Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastics cookware (Endorsed by AENOR in June of 2007.)
UNE-EN 16105:2023 Paints and varnishes - Laboratory method for determination of release of regulated dangerous substances from coatings in intermittent contact with water
UNE-EN 16581:2016 Conservation of Cultural Heritage - Surface protection for porous inorganic materials - Laboratory test methods for the evaluation of the performance of water repellent products
UNE-EN 12980:2000 Materials and articles in contact with foodstuffs - Non-metallic articles for catering and industrial use - Method of test for the determination of impact resistance (Endorsed by AENOR in August of 2000.)

European Association of Aerospace Industries, 3. Experimental materials and methods

AECMA PREN 2002-8-1997 Aerospace Series Metallic Materials Test Methods Part 8 - Micrographic Determination of Grain Size Edition P 2; ASTM E112:1996

Professional Standard - Medicine, 3. Experimental materials and methods

YY/T 0698.5-2009 Packaging materials for terminally sterilized medical devices-Part 5: Requirements and test methods for sealable combination bags and rolls composed of breathable materials and plastic films
YY/T 0698.5-2023 Packaging materials for terminally sterilized medical devices Part 5: Requirements and test methods for sealable combination bags and rolls composed of breathable materials and plastic films

Japanese Industrial Standards Committee (JISC), 3. Experimental materials and methods

JIS T 0310:2009 Test method for notch sensitivity and fatigue crack growth properties of metallic biomaterials
JIS C 61340-4-5:2007 Electrostatics --Part 4-5:Standard test methods for specific applications -- Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person

VN-TCVN, 3. Experimental materials and methods

TCVN 5936-1995 Test methods for insulations and sheaths of electric cables and cords (Elastomeric and thermoplastic compounds)

National Association of Corrosion Engineers (NACE), 3. Experimental materials and methods

NACE TM0174-2002 Laboratory Methods for the Evaluation of Protective Coatings and Lining Materials on Metallic Substrates in Immersion Service (Item No:21206)

IN-BIS, 3. Experimental materials and methods

IS 9022-1979

International Electrotechnical Commission (IEC), 3. Experimental materials and methods

IEC 62788-5-1:2020 Measurement procedures for materials used in photovoltaic modules - Part 5-1: Edge seals - Suggested test methods for use with edge seal materials
IEC 62788-5-1:2020/AMD1:2022 Measurement procedures for materials used in photovoltaic modules - Part 5-1: Edge seals - Suggested test methods for use with edge seal materials
IEC 62788-5-1:2020+AMD1:2022 CSV Measurement procedures for materials used in photovoltaic modules - Part 5-1: Edge seals - Suggested test methods for use with edge seal materials
IEC 61340-4-5:2004 Electrostatics - Part 4-5: Standard test methods for specific applications - Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person

GM North America, 3. Experimental materials and methods

GM GMN4709-2000 Test Method for Determining Material Abrasion Resistance when Used with the Passive Occupant Detection System-A Surface (PODS-A)

Aerospace, Security and Defence Industries Association of Europe (ASD), 3. Experimental materials and methods

ASD-STAN PREN 4050-2-1996 Aerospace Series Test Method for Metallic Materials Ultrasonic Inspection of Bars, Plates, Forging Stock and Forgings Part 2: Performance of Test (Edition P 1)