ZH
RU
ES

initial coordinates

initial coordinates, Total:158 items.

In the international standard classification, initial coordinates involves: Farming and forestry, Road engineering, Hydraulic fluids, Geology. Meteorology. Hydrology, Water quality, Software development and system documentation, Rubber and plastics products, Protection against dangerous goods, Floor treatment appliances, Rotating machinery, Technical drawings, Road vehicle systems, Environmental testing, Pharmaceutics, Petroleum products in general, Soil quality. Pedology, Surface treatment and coating, Lubricants, industrial oils and related products, Transport.

American Society for Testing and Materials (ASTM), initial coordinates

ASTM D5539-94(2003) Standard Specification for Seed Starter Mix
ASTM D5539-94(1998) Standard Specification for Seed Starter Mix
ASTM D5539-94(2008) Standard Specification for Seed Starter Mix
ASTM D5539-14 Standard Specification for Seed Starter Mix
ASTM D5539-94(2013) Standard Specification for Seed Starter Mix
ASTM D5539-13 Standard Specification for Seed Starter Mix
ASTM D7946-19 Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products
ASTM D5610-94(2002) Standard Guide for Defining Initial Conditions in Ground-Water Flow Modeling
ASTM D5610-94(2014) Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling
ASTM D5609-94(2008) Standard Guide for Defining Boundary Conditions in Ground-Water Flow Modeling
ASTM D5610-94(2008) Standard Guide for Defining Initial Conditions in Ground-Water Flow Modeling
ASTM D7946-14 Standard Test Method for Initial pH 40;i-pH41;-Value of Petroleum Products
ASTM D5610-94e1 Standard Guide for Defining Initial Conditions in Ground-Water Flow Modeling
ASTM D1004-03 Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
ASTM D1004-94a(2003) Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
ASTM F1011-22 Standard Guide for Developing a Hazardous Materials Training Curriculum for Initial Response Personnel
ASTM F1977-22 Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
ASTM F1977-04(2017) Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
ASTM F1977-99 Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
ASTM F1977-04 Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
ASTM F1977-04(2010) Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
ASTM E324-79(1989)e1 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
ASTM E324-16 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
ASTM F2299/F2299M-03(2010) Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres
ASTM E324-23 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
ASTM F2299-03 Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres
ASTM D2879-83 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-86 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D8295-19 Standard Test Method for Determination of Shear Wave Velocity and Initial Shear Modulus in Soil Specimens using Bender Elements
ASTM D2879-18 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM F22-65(1998) Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
ASTM F1219-00 Standard Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Initial and Detailed Assessment (Withdrawn 2006)
ASTM F2299/F2299M-03(2017) Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres
ASTM D2879-10 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM E2341/E2341M-05(2019) Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites
ASTM E2341/E2341M-05 Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites
ASTM F2347-03 Standard Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications

(U.S.) Ford Automotive Standards, initial coordinates

FORD ESB-M64J27-A2-1993 INITIAL MAKEUP ADDITIVE Shown on ESB-M64J27-A1
FORD WSS-M4C117-A-2010 FUEL, DIESEL, INITIAL FILL, ARGENTINA ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESZ-M4C104-A-2008 GASOLINE, UNLEADED, INITIAL FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4C124-A-2010 FUEL, DIESEL, INITIAL FILL, HIGH SULFUR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4C115-A-2004 FUEL, DIESEL, INITIAL FILL, 51 CETANE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD SS-M4C9103-A-2009 DIESEL FUEL - LOW TEMPERATURE - INITIAL FILL INHIBITED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4C114-A-2010 GASOLINE, UNLEADED, 87 RON INITIAL FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3B77-A1-2003 PHOSPHATE SOLUTION, ZINC, INITIAL FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4C121-A-2007 FUEL, DIESEL, INITIAL FILL, BRAZIL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C911-A1-2009 OIL, ENGINE, EUROPEAN INITIAL FILL, SAE 10W-40 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M99C101-A-2004 OIL, MINERAL - INITIAL FILL GASOLINE ADDITIVE ***TO BE USED WITH FORD WSS-M99P1111***
FORD WSS-M3B73-A1-2003 PHOSPHATE SOLUTION, ZINC, NICKEL FREE, INITIAL FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4C113-B-2009 FUEL, E22, UNLEADED, INITIAL FILL, BRAZIL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3B82-A1-2009 PRETREATMENT SOLUTION, ZIRCONIUM OXIDE, INITIAL FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4C125-A-2006 GASOLINE, UNLEADED, INITIAL FILL, ALKYLATE, PREMIUM GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C916-A-2009 OIL, ENGINE, API SJ, SAE 15W-50 INITIAL FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C910-A1-2004 OIL, ENGINE, ILSAC GF-2, INITIAL FILL, SAE 5W-30 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C915-A-2004 OIL, ENGINE, ILSAC GF-3, INITIAL FILL, SAE 5W-30 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSE-M2C903-A1-2009 OIL, ENGINE, ILSAC GF-1, INITIAL FILL, SAE 5W-30 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M99C101-A-2009 OIL, MINERAL - INITIAL FILL GASOLINE ADDITIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C914-A-2009 OIL, ENGINE, ILSAC GF-3, INITIAL FILL, SAE 5W-20 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M17B20-A-2009 COMPRESSED NATURAL GAS (CNG), VENEZUELA FIRST FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4C118-A-2010 FUEL, E24, 95 RON, UNLEADED, INITIAL FILL, ARGENTINA ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C206-A-2009 OIL, ENGINE, SAE 10W-30, API CJ-4/SM, INITIAL FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C913-B-2004 OIL, ENGINE, INITIAL AND SERVICE FILL, SAE 5W-30 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3B78-A1-2003 PHOSPHATE SOLUTION, ZINC, INTERNALLY ACCELERATED, INITIAL FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M8B18-A-2006 ADDITIVE, ANTI FREEZE, WINDSHIELD WASHER, INITIAL FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M64J40-A1-2002 PAINT, WATERBORNE CATIONIC EPOXY ELECTROCOAT PRIMER, INITIAL FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C913-C-2009 OIL, ENGINE, INITIAL AND SERVICE FILL, SAE 5W-30 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4C126-A1-2009 FUEL, DIESEL, LUBRICITY ENHANCED INITIAL FILL, 51 CETANE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C922-A1-2009 FLUID, AUTOMATIC TRANSMISSION, INITIAL AND SERVICE FILL, RED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C923-A2-2009 OIL, ENGINE, INITIAL FILL, API SJ/CF AND ACEA A3/B3, SAE 5W-40 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C926-A-2009 OIL, ENGINE, INITIAL AND SERVICE FILL SAE 10W-60 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSE-M4C111-A-2010 GASOLINE, UNLEADED, INITIAL FILL, INTERMEDIATE GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2C904-B-2009 OIL - ENGINE, SAE 10W-30 API SG/CD, CONTROLLED VISCOSITY, INITIAL FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C923-A3-2009 OIL, ENGINE, INITIAL FILL, API SJ/CF or ACEA A2/B2, SAE 15W-40 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C910-A2-2009 OIL, ENGINE, ILSAC GF-2, INITIAL FILL, SAE 10W-30 ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2C910-A1)
FORD WSE-M2C909-A2-2009 OIL, ENGINE, ILSAC GF-1, INITIAL FILL (FFV), SAE 10W-30 ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSE-M2C909-A1)
FORD WSS-M2C937-A-2004 OIL, ENGINE, SAE 0W-40 INITIAL FILL AND SERVICE FILL FULL SYNTHETIC***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C945-A-2010 OIL, ENGINE, ILSAC GF-5, INITIAL AND SERVICE FILLSAE 5W-20 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C945-A-2013 OIL, ENGINE, ILSAC GF-5, INITIAL AND SERVICE FILLSAE 5W-20 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C926-A2-2009 OIL, ENGINE, INITIAL AND SERVICE FILL SAE 5W-50 ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2C926-A)
FORD ESE-M99P25-A-2008 WATER QUALITY, INITIAL FILL, ENGINE COOLANT ***To be used with FORD WSS-M99P1111-A***
FORD WSS-M2C930-A-2004 OIL, ENGINE, ILSAC GF-4, INITIAL FILL AND SERVICE FILL SAE 5W-20 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD SS-M4C9103-A-2004 DIESEL FUEL - LOW TEMPERATURE - INITIAL FILL INHIBITED ***TO BE USED WITH FORD WSS-M99P1111-A*** [Replaced By: FORD WSS-M4C116-A, FORD WSS-M4C116-A, FORD WSS-M4C116-A, FORD WSS-M4C116-A]
FORD WSK-M64J35-C1-1993 PRIMER, WATERBORNE CATHODIC ELECTROCOAT, 25 MICROMETRE FILM BUILD, GRAY, LEAD FREE, 175 C BAKING TEMPERATURE, INITIAL FILL (Shown on WSK-M64J35-A1)
FORD WSS-M2C934-A-2009 OIL, ENGINE, INITIAL AND SERVICE FILL, SAE 5W-30 LOW SAPS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M64J28-A1-2010 PRIMER, WATERBORNE CATIONIC ELECTROCOAT, 20 MICROMETRE FILM BUILD, INITIAL FILL, BLACK, 180 DEGREES C BAKING TEMPERATURE ***TO BE USED WITH FORD WSS-M99P1111-A***

British Standards Institution (BSI), initial coordinates

BS EN 1463-1:2009 Road marking materials - Retroreflecting road studs - Initial performance requirements
BS EN 12899-5:2007 Fixed, vertical road traffic signs — Part 5: Initial type testing
BS EN 12899-5:2008 Fixed, vertical road traffic signs. Initial type testin
BS EN 1463-1:2021 Road marking materials. Retroreflecting road studs - Initial performance requirements
BS EN 1463-1:1998 Road marking materials - Retroreflecting road studs - Initial performance requirements
BS EN 12899-5:2007(2008) Fixed, vertical road traffic signs. Initial type testin
BS EN 12966-2:2005 Road vertical signs - Variable message traffic signs - Initial type testing
19/30387859 DC BS EN 1463-1. Road marking materials. Retroreflecting road studs. Part 1. Initial performance requirements
12/30256079 DC BS EN 12899-5 AMD1. Fixed, vertical road traffic signs. Part 5. Initial type testing

Institute of Electrical and Electronics Engineers (IEEE), initial coordinates

NFPA (Fire) 1410 Standard on Training for Initial Emergency Scene Operations, 2020 Edition
ANSI N42.60-2019 IEEE/ANSI American National Standard Training for Radiological/Nuclear Detection for Initial Response
IEEE/ANSI N42.60-2019 IEEE/ANSI American National Standard Training for Radiological/Nuclear Detection for Initial Response
IEEE Std 1275-1994 IEEE Standard for Boot (Initialization Configuration) Firmware: Core Requirements and Practices
IEEE Std 1275.2-1994 IEEE Standard for Boot (Initialization Configuration) Firmware:Bus Supplement for IEEE 1496(SBus)
IEEE Std 1275.4-1995 IEEE Standard for Boot (Initialization Configuration) Firmware: Bus Supplement for IEEE 896 (Futurebus+(R))
IEEE Std 1244.2-2000 IEEE Standard for Media Management Systems (MMS) Session Security, Authentication, Initialization Protocol (SSAIP)
IEEE Std 1275.1-1994 IEEE Standard for boot (initialization configuration)firmware: instruction set architecture(ISA) supplement for IEEE 1754

Association Francaise de Normalisation, initial coordinates

NF EN 12899-5:2008 Signaux fixes de signalisation routière verticale - Partie 5 : essai de type initial
NF P98-572-2:2006 Road vertical traffic signs - Variable message traffic signs - Part 2 : initial type testing.
NF P98-663-1*NF EN 1463-1:2009 Road marking materials - Retroreflecting road studs - Part 1 : initial performance requirements.
NF P98-590-5*NF EN 12899-5:2008 Fixed, vertical road traffic signs - Part 5 : initial type testing
NF P98-663-1*NF EN 1463-1:2021 Road marking materials - Retroreflecting road studs - Part 1 : initial performance requirements
NF EN 1463-1:2021 Produits de marquage routier - Plots rétroréfléchissants - Partie 1 : exigences initiales de performance
NF P98-663-1:1998 Road marking materials. Retroreflecting road studs. Part 1 : initial performance requirements.
NF P25-495/IN1*NF EN 16361/IN1:2016 Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation

German Institute for Standardization, initial coordinates

DIN EN 12899-5:2008 Fixed, vertical road traffic signs - Part 5: Initial type testing; English version of DIN EN 12899-5:2008-02
DIN EN 1463-1:2022 Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements
DIN EN 1463-1:2019 Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements; German and English version prEN 1463-1:2019
DIN EN 12899-5:2008-02 Fixed, vertical road traffic signs - Part 5: Initial type testing; German version EN 12899-5:2007 / Note: To be amended by DIN EN 12899-5/A1 (2012-03).
DIN EN 12966-2:2005 Road vertical signs - Variable message traffic signs - Part 2: Initial type testing; German version EN 12966-2:2005
DIN 406-11 Bb.1:2000 Technical drawings - Dimensioning - Part 11: Rules for the application; Initial treatment of blanks
DIN EN 1463-1:2022-03 Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements; German version EN 1463-1:2021
DIN EN 1463-1:2009 Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements; English version of DIN EN 1463-1:2009-07

National Fire Protection Association (NFPA), initial coordinates

NFPA 1410-2005 Standard on Training for Initial Emergency Scene Operations Effective Date: 2/7/2005
NFPA 1410-2015 Standard on Training for Initial Emergency Scene Operations (Effective Date: 12/01/2014)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, initial coordinates

GB/T 21383-2008 Coefficient of initial retroreflected luminance of newly applied pavement marking and test method

European Committee for Standardization (CEN), initial coordinates

CEN EN 12899-5-2007 Fixed, vertical road traffic signs - Part 5: Initial type testing
CEN EN 12899-5-2007_ Fixed, vertical road traffic signs — Part 5: Initial type testing
EN 12899-5:2007 Fixed, vertical road traffic signs - Part 5: Initial type testing
FprEN 1463-1-2021 Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements
EN 1463-1:2009 Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements
EN 12966-2:2005 Road vertical signs - Variable message traffic signs - Part 2: Initial type testing (Remains Current)
EN 1463-1:1997/prA1:2000 Amd PRA1 Road Markings Materials - Retroreflecting Road Studs - Part 1: Initial Performance Requirements

Danish Standards Foundation, initial coordinates

DS/EN 1463-1:2009 Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements
DS/EN 12899-5:2008 Fixed, vertical road traffic signs - Part 5: Initial type testing
DS/EN 12966-2:2006 Road vertical signs - Variable message traffic signs - Part 2: Initial type testing

Lithuanian Standards Office , initial coordinates

LST EN 1463-1-2009 Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements
LST EN 12899-5-2008 Fixed, vertical road traffic signs - Part 5: Initial type testing
LST EN 12966-2-2005 Road vertical signs - Variable message traffic signs - Part 2: Initial type testing

AENOR, initial coordinates

UNE-EN 1463-1:2010 Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements
UNE-EN 12899-5:2009 Fixed, vertical road traffic signs - Part 5: Initial type testing

ZA-SANS, initial coordinates

SANS 1463-1:2007 Road marking materials - Retroreflecting road studs Part 1: Initial performance requirements

未注明发布机构, initial coordinates

DIN EN 1463-1:1997 Road marking materials — Retroreflecting road studs — Part 1: Initial performance requirements

CEN - European Committee for Standardization, initial coordinates

EN 1463-1:1997 Road Marking Materials - Retroreflecting Road Studs - Part 1: Initial Performance Requirements (Incorporates Amendment A1: 2003)
EN 12899-5:2007/FPRA1:2012 Fixed@ vertical road traffic signs - Part 5: Initial type testing

ES-UNE, initial coordinates

UNE-EN 1463-1:2023 Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements

Group Standards of the People's Republic of China, initial coordinates

T/SHMHZQ 068-2022 Calibration method for initial resolver angle of permanent magnet synchronous drive motor for electric vehicles

AT-ON, initial coordinates

ONORM Z 1440-1987 Rope down devices; safety requirements; initial and repeated testing, marking of conformity
ONORM Z 1441-1988 Rope down devicesfor ropeways; safety requirements; initial and repeated testing, marking of conformity

American National Standards Institute （ANSI), initial coordinates

ANSI/IEEE Std1275:1994 Standard for Boot (initialization configuration) Firmware, Core Specifications and Practices / Note: Approved 1994-08-23.

Society of Automotive Engineers (SAE), initial coordinates

SAE J2698-2008 Primary Single Phase Nominal 120 VAC Wiring Distribution Assembly Design Truck and Bus
SAE J2698-2014 Primary Single Phase Nominal 120 VAC Wiring Distribution Assembly Design—Truck and Bus
SAE J2698-2022 Primary Single Phase Nominal 120 VAC Wiring Distribution Assembly Design—Truck and Bus

GB-REG, initial coordinates

REG CAP 624 PART 15-2009 Air Traffic Controllers ?Performance Objectives Part 15 ?Initial Training Assessor First Issue

SAE - SAE International, initial coordinates

SAE J2698-2018 Primary Single Phase Nominal 120 VAC Wiring Distribution Assembly Design - Truck and Bus

AASHTO - American Association of State Highway and Transportation Officials, initial coordinates

TP6-1993 Standard Test Method for the Measurement of Initial Asphalt Adsorption and Desorption in the Presence of Moisture (Edition 1A)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., initial coordinates

IEEE 1275.4-1995 Standard for Boot (Initialization Configuration) Firmware: Bus Supplement for IEEE 896 (Futurebus+) (IEEE Computer Society Document)
IEEE 1244.2-2000 Standard for Media Management Systems (MMS) Session Security@ Authentication@ Initialization Protocol (SSAIP) (IEEE Computer Society)
IEEE 1275.1-1994 Standard for Boot (Initialization Configuration) Firmware: Instruction Set Architecture (ISA) Supplement for IEEE 1754 (IEEE Computer Society Document)

International Telecommunication Union (ITU), initial coordinates

ITU-T J.460.3 FRENCH-2008 IPCablecom2 residential SIP telephony: Usage data recording
ITU-T J.460.3 SPANISH-2008 IPCablecom2 residential SIP telephony: Usage data recording

US-CFR-file, initial coordinates

CFR 14-121.424-2013 Aeronautics and space. Part121:Operating requirements: domestic, flag, and supplemental operations. Section121.424:Pilots: initial, transition, and upgrade flight training.
CFR 40-63.1365-2014 Protection of Environment. Part63:National emission standards for hazardous air pollutants for source categories (continued). Section63.1365:Test methods and initial compliance procedures.