ZH
RU
ES

initial formula

initial formula, Total:143 items.

In the international standard classification, initial formula involves: Telecommunication systems, Software development and system documentation, Structures of buildings, Equipment for the chemical industry, Internal combustion engines for road vehicles, Diagnostic, maintenance and test equipment, Hydraulic fluids, Quality, Water quality, Radiation measurements, Insulating fluids, Road engineering, Materials for aerospace construction, Rubber and plastics products, Floor treatment appliances, Aerospace fluid systems and components, Rotating machinery, Pipeline components and pipelines, Solar energy engineering, Integrated circuits. Microelectronics, Optoelectronics. Laser equipment, Internal combustion engines, Environmental testing, Pharmaceutics, Fibre optic communications, Reinforced plastics, Petroleum products in general, Soil quality. Pedology, Paints and varnishes, Protection against dangerous goods, Air quality, Surface treatment and coating, Microbiology, Testing of metals, Lubricants, industrial oils and related products, Transport, Medical equipment, Protective equipment, Lubrication systems, Construction materials.

Professional Standard - Post and Telecommunication, initial formula

YD/T 1938.1-2009 Test method of Session Initiation Protocol(SIP).Part 1: Basic Session Initiation Protocol(SIP)
YD/T 1523-2006 Testing Methods to Session Initiation Protocol Server
YD/T 1938.2-2009 Test method for Session Initiation Protocol(SIP).Part 2: SIP's Applications about Call Control Basedon Softswitch Network

CO-ICONTEC, initial formula

ICONTEC 1777-1982

Institute of Electrical and Electronics Engineers (IEEE), initial formula

IEEE 1275.2-1994 Boot (Initialization configuration) firmware: Bus supplement for IEEE 1496 (SBus)
IEEE 1275-1994 Boot (Initialization configuration) Firmware: Core requirements and practices
IEEE Std 1275-1994 IEEE Standard for Boot (Initialization Configuration) Firmware: Core Requirements and Practices
IEEE Std 1275.2-1994 IEEE Standard for Boot (Initialization Configuration) Firmware:Bus Supplement for IEEE 1496(SBus)
IEEE Std 1275.4-1995 IEEE Standard for Boot (Initialization Configuration) Firmware: Bus Supplement for IEEE 896 (Futurebus+(R))
IEEE Std 1275.1-1994 IEEE Standard for boot (initialization configuration)firmware: instruction set architecture(ISA) supplement for IEEE 1754

RU-GOST R, initial formula

GOST R 57289-2016 Masonry. Method of determination of initial shear strength
GOST R 57291-2016 Masonry. Method of determination of initial shear strength
GOST 22988.1-1978 Gas caunters. Method of threshold voltage measurement
GOST 24613.16-1977 Optoelectronic integrated microcircuits. Method for measuring initial residual voltage of analogue signal commutators

Japanese Industrial Standards Committee (JISC), initial formula

JIS K 3831:1990 Testing methods for initial flow rate of membrance filters
JIS K 3702:2008 Test methods for Culture media -- Preparation of initial suspension and decimal dilutions
JIS K 7038:1998 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test method to prove the resistance to initial ring deflection

GM North America, initial formula

GM 9985861-2014 Grease, Molybdenum Disulfide Containing, Initial Engine Assembly (Issue 2)

未注明发布机构, initial formula

SAE J1985-201310 Fuel Filters Initial Single-Pass Efficiency Test Method
BS EN 1052-3:2002(2007) Methods of test for masonry — Part 3 : Determination of initial shear strength
DIN EN 1226:1996 Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test method to prove the resistance to initial ring deflection

Society of Automotive Engineers (SAE), initial formula

SAE J1985-1993 Fuel Filters Initial Single-Pass Efficiency Test Method
SAE J1985-2006 Fuel Filter Initial Single-Pass Efficiency Test Method
SAE J1985-2013 Fuel Filter - Initial Single-Pass Efficiency Test Method

Association Francaise de Normalisation, initial formula

NF T90-210:2018 Water quality - Protocol for the intial method performance assesment in a laboratory
NF T90-210:2009 Water quality - Protocol for the intial method performance assesment in a laboratory.
NF P12-703*NF EN 1052-3:2003 Methods of test for masonry - Part 3 : determination of initial shear strength
NF EN 1052-3/A1:2007 Méthodes d'essai de la maçonnerie - Partie 3 : détermination de la résistance initiale au cisaillement
NF EN 1052-3:2003 Méthodes d'essai de la maçonnerie - Partie 3 : détermination de la résistance initiale au cisaillement
NF P12-703/A1*NF EN 1052-3/A1:2007 Methods of test for masonry - Part 3 : determination of initial shear strength
NF X32-102:2023 Biodiversité et génie écologique - Démarche de conduite d'un état initial de la biodiversité dans le cadre d'un projet
NF T57-218:1996 Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Test method to prove the resistance to initial ring deflection.
NF EN 846-14:2013 Méthodes d'essai des composants accessoires de maçonnerie - Partie 14 : détermination de la résistance initiale au cisaillement entre la partie préfabriquée d'un linteau composite et de la maçonnerie placée au-dessus

American Society for Testing and Materials (ASTM), initial formula

ASTM D7946-19 Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products
ASTM D7946-14 Standard Test Method for Initial pH 40;i-pH41;-Value of Petroleum Products
ASTM D1004-03 Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
ASTM D1004-94a(2003) Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
ASTM F1977-22 Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
ASTM F1977-04(2017) Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
ASTM F1977-99 Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
ASTM F1977-04 Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
ASTM F1977-04(2010) Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
ASTM E324-79(1989)e1 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
ASTM E324-16 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
ASTM F2299/F2299M-03(2010) Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres
ASTM E324-23 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
ASTM F2299-03 Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres
ASTM D2879-83 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-86 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D8295-19 Standard Test Method for Determination of Shear Wave Velocity and Initial Shear Modulus in Soil Specimens using Bender Elements
ASTM D2879-18 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM F22-65(1998) Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
ASTM F2299/F2299M-03(2017) Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres
ASTM D2879-10 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM E2341/E2341M-05(2019) Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites
ASTM E2341/E2341M-05 Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites

German Institute for Standardization, initial formula

DIN VDE 0380-5:1995 Insulating liquids - Determination of the partial discharge inception voltage (PDIV) - Test methods (IEC/TR3 61294:1993)(Report)
DIN EN 1052-3:2007-06 Methods of test for masonry - Part 3: Determination of initial shear strength; German version EN 1052-3:2002 + A1:2007
DIN EN 1052-3:2007 Methods of test for masonry - Part 3: Determination of initial shear strength(includes Amendment A1:2007); English version of DIN EN 1052-3:2007-06
DIN EN 846-14:2012-11 Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it; German version EN 846-14:2012
DIN ISO 11665-8:2013 Measurement of radioactivity in the environment - Air: radon-222 - Part 8: Methodologies for initial and additional investigations in buildings (ISO 11665-8:2012)
DIN ISO 11665-8:2010 Measurement of radioactivity in the environment - Air - Part 8: Radon-222 in buildings: Methodologies for initial and additional investigations (ISO/DIS 11665-8:2010)

NEMA - National Electrical Manufacturers Association, initial formula

NEMA XR 8-1979 Test Methods for Diagnostic X-Ray Machines for Use During Initial Installation

Danish Standards Foundation, initial formula

DS/EN 1052-3/A1:2007 Methods of test for masonry - Part 3: Determination of initial shear strength
DS/EN 1052-3:2002 Methods of test for masonry - Part 3: Determination of initial shear strength
DS/EN 846-14:2012 Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it

Lithuanian Standards Office , initial formula

LST EN 1052-3-2003 Methods of test for masonry - Part 3: Determination of initial shear strength
LST EN 1052-3-2003/A1-2007 Methods of test for masonry - Part 3: Determination of initial shear strength
LST EN 1226-2002 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection
LST EN 846-14-2012 Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it

AENOR, initial formula

UNE-EN 1052-3:2003/A1:2008 Methods of test for masonry - Part 3: Determination of initial shear strength
UNE-EN 1052-3:2003 Methods of test for masonry - Part 3: Determination of initial shear strength.
UNE-EN 846-14:2013 Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it

Professional Standard - Aerospace, initial formula

QJ 1812-1989 Method for Determination of Initial Tensile Modulus of Composite Solid Propellants
QJ 1468-1988 Test method for initial thermal decomposition temperature and deflagration temperature of composite solid propellant

American National Standards Institute （ANSI), initial formula

ANSI/IEEE Std1275:1994 Standard for Boot (initialization configuration) Firmware, Core Specifications and Practices / Note: Approved 1994-08-23.
ANSI/ASTM F1977:2004 Test Method for Determining Initial Fractional Filtration Efficiency of a Vacuum Cleaner System

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, initial formula

GB/T 21383-2008 Coefficient of initial retroreflected luminance of newly applied pavement marking and test method
GB/T 6495.11-2016 Photovoltaic devices.Part 11: Test method of initial light-induced degradation of crystalline silicon solar cell
GB/T 22052-2008 Test method for vapor pressure-temperature relationship and initial decompostition temperature of liquids by isoteniscope

British Standards Institution (BSI), initial formula

BS EN 2781:1998 Non-metallic materials - Structural adhesives - Test methods - Determination of the primer thickness
DD ISO/TS 23556:2007 Performance test method for diesel engine soot-removal devices in lubricating oils. Initial filtration efficiency
BS ISO 14085-6:2015 Aerospace series. Hydraulic filter elements. Test methods. Initial cleanliness level
BS ISO 10466:2021 Glass-reinforced thermosetting plastics (GRP) pipes. Test method to prove the resistance to initial ring deflection
BS DD ISO/TS 23556:2007 Performance test method for diesel engine soot-removal devices in lubricating oils - Initial filtration efficiency
20/30404854 DC BS ISO 10466. Glass-reinforced thermosetting plastics (GRP) pipes. Test method to prove the resistance to initial ring deflection
BS ISO 12013-1:2012 Paints and varnishes. Determination of curing characteristics using a free damped oscillation method. Start temperature of the curing reaction
BS EN 1226:1996 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test method to prove the resistance to initial ring deflection
19/30389925 DC BS ISO 8521. Glass-reinforced thermosetting plastic (GRP) pipes. Test methods for the determination of the initial circumferential tensile wall strength
BS ISO 8513:2014 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test methods for the determination of the apparent initial longitudinal tensile strength
BS 7448-4:1997 Fracture mechanics toughness tests. Method for determination of fracture resistance curves and initiation values for stable crack extension in metallic materials
BS EN 60068-2-67:1996 Environmental testing - Test methods - Test Cy - Damp heat, steady state, accelerated test primarily intended for components
BS ISO 8513:2023 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test methods for the determination of the initial longitudinal tensile strength
BS ISO 8513:2016 Tracked Changes. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test methods for the determination of the initial longitudinal tensile strength
BS 7403-4:1998 Full-flow lubricating oil filters for internal combustion engines. Methods of test for initial particle retention efficiency, life and cumulative efficiency (gravimetric method)
BS EN 846-14:2012 Methods of test for ancillary components for masonry. Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it
BS EN 1015-21:2002 Methods of test for mortar for masonry - Determination of the compatibility of one-coat rendering mortars with substrates

ESDU - Engineering Sciences Data Unit, initial formula

ESDU 75035-1975 Initial buckling of square plates in shear with central flanged circular holes.
ESDU 75034-1975 Initial buckling stress@ maximum direct stress and shear strain of square plates in shear with central circular holes.
ESDU 87036 B-1996 Elastic stresses and deflections for square plates with small initial curvature under uniform pressure on the concave or convex face.

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., initial formula

IEEE 1275.4-1995 Standard for Boot (Initialization Configuration) Firmware: Bus Supplement for IEEE 896 (Futurebus+) (IEEE Computer Society Document)
IEEE 1275.1-1994 Standard for Boot (Initialization Configuration) Firmware: Instruction Set Architecture (ISA) Supplement for IEEE 1754 (IEEE Computer Society Document)

European Committee for Standardization (CEN), initial formula

EN 2781:1998 Aerospace series - Non-metallic materials - Structural adhesives - Test methods - Determination of the primer thickness
EN 1052-3:2002 Methods of test for masonry - Part 3: Determination of initial shear strength
EN 1226:1996 Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Test Method to Prove the Resistance to Initial Ring Deflection
EN 846-14:2012 Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it
EN ISO 11810-1:2009 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition and penetration

CU-NC, initial formula

NC 30-78-1988 Plastics Industry. Determination of Initial Tearing Strength of Films and Sheets. Testing Method

Group Standards of the People's Republic of China, initial formula

T/SHMHZQ 068-2022 Calibration method for initial resolver angle of permanent magnet synchronous drive motor for electric vehicles

International Organization for Standardization (ISO), initial formula

ISO 14085-6:2015 Aerospace series - Hydraulic filter elements - Test methods - Part 6: Initial cleanliness level
ISO 8521:2020 Glass-reinforced thermosetting plastic (GRP) pipes — Test methods for the determination of the initial circumferential tensile wall strength
ISO/TS 23556:2007 Performance test method for diesel engine soot-removal devices in lubricating oils - Initial filtration efficiency
ISO 10466:2021 Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection
ISO 11665-8:2012 Measurement of radioactivity in the environment - Air: radon-222 - Part 8: Methodologies for initial and additional investigations in buildings
ISO/PRF 8513:2023 Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the initial longitudinal tensile strength
ISO 8513:2023 Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the initial longitudinal tensile strength
ISO/DIS 8513 Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the initial longitudinal tensile strength
ISO 12013-1:2012 Paints and varnishes - Determination of curing characteristics using a free damped oscillation method - Part 1: Start temperature of the curing reaction

Professional Standard - Machinery, initial formula

JB/T 11791-2014 Performance test method for diesel engine soot-removal devices in lubricating oils.Initial filtration efficiency

AASHTO - American Association of State Highway and Transportation Officials, initial formula

TP6-1993 Standard Test Method for the Measurement of Initial Asphalt Adsorption and Desorption in the Presence of Moisture (Edition 1A)

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, initial formula

ITU-T P.917-2019 Subjective test methodology for assessing impact of initial loading delay on quality of experience (Study Group 12)

Korean Agency for Technology and Standards (KATS), initial formula

KS M ISO 8521:2022 Glass-reinforced thermosetting plastic (GRP) pipes — Test methods for the determination of the initial circumferential tensile wall strength
KS M ISO 10466:2004 Plastics piping systems－Glass-reinforced thermosetting plastics(GRP) pipes－Test method to prove the resistance to initial ring deflection
KS M ISO 10466:2019 Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Test method to prove the resistance to initial ring deflection
KS M ISO 8513-2017(2022) Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Test methods for the determination of the apparent initial longitudinal tensile strength
KS M ISO 8521:2019 Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Test methods for the determination of the apparent initial circumferential tensile strength
KS R ISO 4548-4-2007(2022) Methods of test for full-flow lubricating oil filters for internal combustion engines－Part 4：Initial particle retention efficiency, life and cumulative efficiency(gravimetric method)

KR-KS, initial formula

KS M ISO 8521-2022 Glass-reinforced thermosetting plastic (GRP) pipes — Test methods for the determination of the initial circumferential tensile wall strength
KS M ISO 10466-2019 Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Test method to prove the resistance to initial ring deflection
KS M ISO 8513-2017 Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Test methods for the determination of the apparent initial longitudinal tensile strength
KS M ISO 8521-2019 Plastics piping systems — Glass-reinforced thermosetting plastics(GRP) pipes — Test methods for the determination of the apparent initial circumferential tensile strength

VN-TCVN, initial formula

TCVN 3121-9-2003 Mortar for masonry.Test methods.Part 9: Determination of intial time setting of fresh mortar

工业和信息化部, initial formula

YD/T 2941.1-2015 Test method for interoperability between Session Initiation Protocol and traditional network protocols Part 1: Interoperability between SIP and ISUP
YD/T 2941.2-2015 Test methods for interoperability between Session Initiation Protocol and traditional network protocols Part 2: Interoperability between SIP and BICC
YD/T 2941.3-2015 Test methods for interoperability between Session Initiation Protocol and traditional network protocols Part 3: SIP and SIP-I interoperability

International Telecommunication Union (ITU), initial formula

ITU-T J.460.4-2008 IPCablecom2 residential SIP telephony: Embedded-user equipment provisioning specification Study Group 9

Standard Association of Australia （SAA）, initial formula

AS/NZS 3572.24:1997 Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the determination of the initial hoop tensile strength by means of a tensile plate test
AS/NZS 3572.23:1997 Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the determination of the initial longitudinal tensile strength by means of a tensile plate test

US-CFR-file, initial formula

CFR 34-75.253-2013 Education. Part75:Direct grant programs. Section75.253:Continuation of a multi-year project after the first budget period.
CFR 40-63.1365-2014 Protection of Environment. Part63:National emission standards for hazardous air pollutants for source categories (continued). Section63.1365:Test methods and initial compliance procedures.

CEN - European Committee for Standardization, initial formula

EN ISO 11810-1:2005 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition and penetration

European Telecommunications Standards Institute (ETSI), initial formula

ETSI TS 124 238-2009 Universal Mobile Telecommunications System (UMTS); LTE; Session Initiation Protocol (SIP) based user configuration; Stage 3 V8.1.0; 3GPP TS 24.238 version 8.1.0 Release 8
ETSI TS 124 238-2010 Universal Mobile Telecommunications System (UMTS); LTE; Session Initiation Protocol (SIP) based user configuration; Stage 3 V9.0.0; 3GPP TS 24.238 version 9.0.0 Release 9