ZH
RU
ES

Material Surface Analysis Technology

Material Surface Analysis Technology, Total:276 items.

In the international standard classification, Material Surface Analysis Technology involves: Analytical chemistry, Vacuum technology, Technical drawings, Cutting tools, Products of the chemical industry, Iron and steel products, Surface treatment and coating, Physics. Chemistry, Vocabularies, Items of art and handicrafts, Integrated circuits. Microelectronics, Acoustics and acoustic measurements, Linear and angular measurements, Piezoelectric and dielectric devices, Particle size analysis. Sieving, Paint coating processes, Structures of buildings, Road engineering, Aids for disabled or handicapped persons, Medical equipment, Equipment for the chemical industry, Testing of metals, Character sets and information coding, Paints and varnishes, Non-ferrous metals, Industrial automation systems, Applications of information technology, Plastics, Aircraft and space vehicles in general, Ceramics, Extraction and processing of petroleum and natural gas, Construction materials, Semiconducting materials, Graphic technology, Equipment for petroleum and natural gas industries, Electrical equipment for working in special conditions.

AT-ON, Material Surface Analysis Technology

ONORM M 1113-1982 Technical surfaces; methods of surjace analyzing Surjaces techniqu.es; methodes de essai des surfaces
ONORM A 6063-1990 Technical drawings; hatchings; representation ofcutting edges and materials

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Material Surface Analysis Technology

GB/T 33498-2017 Surface chemical analysis—Characterization of nanostructured materials
GB/T 17850.1-2017 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part1:General introduction and classification
GB/T 17850.4-2017 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 4:Coal furnace slag
GB/T 18838.2-2017 Preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—Part 2: Chilled-iron grit
GB/T 17850.5-2017 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 5:Nickel refinery slag
GB/T 17850.7-2017 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 7: Fused aluminium oxide
GB/T 20935.3-2018 Metal materials—Method of electromagnetic acoustic inspection—Part 3: Standard practice for ultrasonic surface examinations using electromagnetic acoustic transducer (EMAT) techniques

International Organization for Standardization (ISO), Material Surface Analysis Technology

ISO/TR 14187:2020 Surface chemical analysis — Characterization of nanostructured materials
ISO/TR 14187:2011 Surface chemical analysis - Characterization of nanostructured materials
ISO 25178-73:2019 Geometrical product specifications (GPS) — Surface texture: Areal — Part 73: Terms and definitions for surface defects on material measures
ISO 20579-3:2021 Surface chemical analysis - Sample handling, preparation and mounting - Part 3: Biomaterials
ISO 14606:2022 Surface chemical analysis — Sputter depth profiling — Optimization using layered systems as reference materials
ISO/TR 16268:2009 Surface chemical analysis - Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation
ISO 5436-1:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures
ISO 13565-2:1996/cor 1:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve; Technical Corrigendum 1
ISO 22415:2019 Surface chemical analysis — Secondary ion mass spectrometry — Method for determining yield volume in argon cluster sputter depth profiling of organic materials
ISO 13565-3:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve
ISO 17331:2004 Surface chemical analysis - Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy
ISO 17190-9:2001/cor 1:2002 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 9: Gravimetric determination of density; Technical Corrigendum 1
ISO 20341:2003 Surface chemical analysis - Secondary-ion mass spectrometry - Method for estimating depth resolution parameters with multiple delta-layer reference materials
ISO 13565-2:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve
ISO 17853:2003/Cor 1:2004 Wear of implant materials - Polymer and metal wear particles - Isolation, characterization and quantification; Technical Corrigendum 1
ISO 18554:2016 Surface chemical analysis - Electron spectroscopies - Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
ISO 23812:2009 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth calibration for silicon using multiple delta-layer reference materials
ISO 19668:2017 Surface chemical analysis — X-ray photoelectron spectroscopy — Estimating and reporting detection limits for elements in homogeneous materials
ISO 603-5:1999/Cor 1:1999 Bonded abrasive products - Dimensions - Part 5: Grinding wheels for surface grinding/face grinding
ISO/TS 10303-1769:2014 Industrial automation systems and integration - Product data representation and exchange - Part 1769: Application module: Fea material aspects
ISO 14855-1:2005/Cor 1:2009 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method; Technical Corrigendum 1
ISO/DIS 7207-2:2011 Implants for surgery — Components for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and plastics materials
ISO 8503-1:1988 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 1: specifications and definitions for ISO surface profile comparators for the assessment of abrasi
ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 18118:2015 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO/DIS 18118:2023 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO/FDIS 18118:2023 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 14852:1999/cor 1:2005 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide; Technical Corrigendum 1
ISO 21222:2020 Surface chemical analysis — Scanning probe microscopy — Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
ISO 10426-1:2009/cor 1:2010 Petroleum and natural gas industries — Cements and materials for well cementing — Part 1: Specification TECHNICAL CORRIGENDUM 1
ISO 4618-3:1999 Paints and varnishes - Terms and definitions for coating materials - Part 3: Surface preparation and methods of application
ISO 10426-1:2009/Cor 2:2012 Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification; Technical Corrigendum 2
ISO/IEC 80079-20-2:2016/Cor 1:2017 Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test methods; Technical Corrigendum 1

British Standards Institution (BSI), Material Surface Analysis Technology

PD ISO/TR 14187:2020 Surface chemical analysis. Characterization of nanostructured materials
21/30440164 DC BS ISO 14606. Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials
BS ISO 14606:2022 Tracked Changes. Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials
BS ISO 22415:2019 Surface chemical analysis. Secondary ion mass spectrometry. Method for determining yield volume in argon cluster sputter depth profiling of organic materials
18/30337640 DC BS ISO 20579-3. Surface chemical analysis. Sample handling, preparation and mounting. Part 3. Biomaterials
BS ISO 14606:2015 Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials
BS ISO 14606:2000 Surface chemical analysis - Sputter depth profiling - Optimization using layered systems as reference materials
BS ISO 14606:2001 Surface chemical analysis - Sputter depth profiling - Optimization using layered systems as reference materials
BS EN 17114:2018 Conservation of cultural heritage. Surface protection for porous inorganic materials. Technical and chemical data sheets of water repellent product
BS 6221-22:1990 Printed wiring boards - Guide to the use of printed wiring board substrate materials: surface mount technology
BS ISO 19668:2017 Surface chemical analysis. X-ray photoelectron spectroscopy. Estimating and reporting detection limits for elements in homogeneous materials
BS ISO 20341:2003 Surface chemical analysis - Secondary-ion mass spectrometry - Method for estimating depth resolution parameters with multiple delta-layer reference materials
BS ISO 18554:2016 Surface chemical analysis. Electron spectroscopies. Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
PD ISO/TR 16268:2009 Surface chemical analysis. Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation
20/30409889 DC BS ISO 18114. Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative sensitivity factors from ion-implanted reference materials
BS ISO 7207-2:2011 Implants for surgery. Components for partial and total knee joint prostheses. Articulating surfaces made of metal, ceramic and plastics materials
BS ISO 18114:2021 Tracked Changes. Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative sensitivity factors from ion-implanted reference materials
BS ISO 7206-2:2011+A1:2016 Implants for surgery. Partial and total hip joint prostheses. Articulating surfaces made of metallic, ceramic and plastics materials
PD IEC TS 63070:2019 Ultrasonics. Field characterization. Infrared imaging techniques for determining temperature elevation in tissue-mimicking material and at the radiation surface of a transducer in still air
BS ISO 18118:2005 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
23/30461294 DC BS ISO 18118. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
BS ISO 7207-2:2011+A2:2020 Implants for surgery. Components for partial and total knee joint prostheses. Articulating surfaces made of metal, ceramic and plastics materials
BS ISO 21222:2020 Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
BS ISO 18118:2015 Tracked Changes. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials

German Institute for Standardization, Material Surface Analysis Technology

DIN 28400-6:1980-10 Vacuum technology; terms and definitions, surface analysis techniques
DIN 28400-6:1980 Vacuum technology; terms and definitions, surface analysis techniques
DIN 51456:2013-10 Testing of materials for semiconductor technology - Surface analysis of silicon wafers by multielement determination in aqueous analysis solutions using mass spectrometry with inductively coupled plasma (ICP-MS)
DIN EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
DIN EN ISO 25178-73:2019-10 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019); German version EN ISO 25178-73:2019
DIN 51456:2013 Testing of materials for semiconductor technology - Surface analysis of silicon wafers by multielement determination in aqueous analysis solutions using mass spectrometry with inductively coupled plasma (ICP-MS)
DIN EN 17114:2019-02 Conservation of cultural heritage - Surface protection for porous inorganic materials - Technical and chemical data sheets of water repellent product; German version EN 17114:2018
DIN EN 17114:2019 Conservation of cultural heritage - Surface protection for porous inorganic materials - Technical and chemical data sheets of water repellent product
DIN 66126-1:1989 Determination of specific surface area of disperse solids by the permeability technique; fundamentals
DIN EN 10263-3:2002 Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels; German version EN 10263-3:2001
DIN EN ISO 25178-70:2014 Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014); German version EN ISO 25178-70:2014
DIN 28052-5:1997 Chemical apparatus - Surface treatment of concrete components in process plants using non-metallic materials - Part 5: Combined coatings
DIN ISO/TS 80004-4:2012 Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS 80004-4:2011)
DIN IEC/TS 61994-4-4:2011 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4: Materials - Materials for surface acoustic wave (SAW) devices (IEC/TS 61994-4-4:2010)
DIN EN 10132-2:2000 Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 2: Case hardening steels; German version EN 10132-2:2000
DIN EN 10263-3:2018 Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels
DIN IEC/TS 61994-4-4:2011-11*DIN SPEC 41994-4-4:2011-11 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4: Materials - Materials for surface acoustic wave (SAW) devices (IEC/TS 61994-4-4:2010)
DIN 66126-2:1989 Determination of specific surface area of disperse solids by the permeability technique; Blaine method and apparatus
DIN EN 4408-003:2008-10 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 3: Parts including core materials; German and English version EN 4408-003:2005 / Note: Applies in conjunction with DIN EN 4408-001 (2007-06).
DIN EN 4408-005:2007-06 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 5: Seams; German and English version EN 4408-005:2005 / Note: Applies in conjunction with DIN EN 4408-001 (2007-06).
DIN EN 10163-1 Berichtigung 1:2007 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements; German version EN 10163-1:2004, Corrigenda to DIN EN 10163-1:2005-03; German version EN 10163-1:2004/AC:2007
DIN EN 4408-003:2007 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 3: Parts including core materials; German and English version EN 4408-003:2005
DIN EN 4408-005:2007 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 5: Seams; German and English version EN 4408-005:2005
DIN EN 4408-001:2007-06 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 1: General rules; German and English version EN 4408-001:2005
DIN 50434:1986 Testing of materials for semiconductor technology; detection of crystal defects in monocrystalline silicon using etching techniques on {111} and {100} surfaces
DIN 50452-1:1995-11 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 1: Microscopic determination of particles
DIN EN 4408-001:2007 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 1: General rules; German and English version EN 4408-001:2005
DIN EN 4408-004:2007 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 4: Items obtained by winding; German and English version EN 4408-004:2005
DIN EN 4408-002:2007 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 2: Laminated parts; German and English version EN 4408-002:2005
DIN EN 4408-006:2007 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 6: Preforms; German and English version EN 4408-006:2005
DIN EN 4408-006:2007-06 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 6: Preforms; German and English version EN 4408-006:2005 / Note: Applies in conjunction with DIN EN 4408-001 (2007-06).
DIN EN 4408-002:2007-06 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 2: Laminated parts; German and English version EN 4408-002:2005 / Note: Applies in conjunction with DIN EN 4408-001 (2007-06).
DIN 50456-3:1999 Testing of materials for semiconductor technology - Method for the characterisation of moulding compounds for electronic components - Part 3: Determination of cationic impurities

国家市场监督管理总局、中国国家标准化管理委员会, Material Surface Analysis Technology

GB/T 38114-2019 Nanotechnologies—Quantitative analysis of the surface oxygen functional groups on graphene materials—Chemical titration method
GB/T 40128-2021 Surface chemical analysis—Atomic force microscopy—Test method for thickness of the two-dimensional layered molybdenum disulfide nanosheets
GB/Z 38062-2019 Nanotechnologies—Determination of specific surface area of graphene materials—Methylene blue adsorption method
GB/T 17850.9-2021 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 9: Staurolite

IT-UNI, Material Surface Analysis Technology

UNI 3972-1981 Technical drawings. Hatchings for representation of materials in section.
UNI 3972-1961

Group Standards of the People's Republic of China, Material Surface Analysis Technology

T/CBMCA 032-2022 Technical specification for the application of negative ion surface coating materials

CN-STDBOOK, Material Surface Analysis Technology

图书 A-4619 Material quality inspection and analysis technology

未注明发布机构, Material Surface Analysis Technology

ISO 14976:1998/Cor 1:1999 Surface Chemical Analysis Data Transfer Format Technical Corrigendum 1
BS ISO 20341:2003(2010) Surface chemical analysis — Secondary - ion mass spectrometry — Method for estimating depth resolution parameters with multiple delta - layer reference materials
ISO 13583-2:2003/Cor 1:2004 Centrifugally cast steel and alloy products — Part 2: Heat resistant materials
ISO 4378-1:1997/Cor 1:1999 Plain bearings. Terminology, definitions and classifications. Part 1: Design, bearing materials and their properties. Technical Corrigendum 1
ISO 3134-1:1985/Cor 1:1989 Terms and definitions for light metals and their alloys Part 1: Materials Technical Corrigendum in three languages 1
ISO 8502-3:1992/Cor 1:1993 Preparation of steel substrates before application of coatings and related products. Tests for assessment of surface cleanliness. Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) Technical Corrigendum 1

CEN - European Committee for Standardization, Material Surface Analysis Technology

EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures
EN 17114:2018 Conservation of cultural heritage - Surface protection for porous inorganic materials - Technical and chemical data sheets of water repellent product
EN 4408-005:2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 5: Seams
EN 4408-001:2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 1: General rules
EN 4408-003:2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 3: Parts including core materials
EN 4408-006:2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 6: Preforms
EN 4408-002:2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 2: Laminated parts

American Society for Testing and Materials (ASTM), Material Surface Analysis Technology

ASTM E1257-93(2003) Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis
ASTM E1257-93(2008) Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis
ASTM E1257-93(1998)e1 Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis
ASTM E1257-16 Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis
ASTM F3419-22 Standard Test Method for Mineral Characterization of Equine Surface Materials by X-Ray Diffraction (XRD) Techniques
ASTM E290-22 Standard Test Methods for Bend Testing of Material for Ductility
ASTM E2909-13 Standard Guide for Investigation/Study/Assay Tab-Delimited Format for Nanotechnologies (ISA-TAB-Nano): Standard File Format for the Submission and Exchange of Data on Nanomaterials and Characterizations
ASTM E2027-99 Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials
ASTM E2027-05 Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials
ASTM E2027-09 Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials

Korean Agency for Technology and Standards (KATS), Material Surface Analysis Technology

KS A ISO 5261:2014 Technical drawings — Simplified representation of bars and profile sections
KS M ISO 6384:2007 Surface active agents－Technical ethoxylated fatty amines－Methods of analysis
KS D ISO 14606:2003 Surface chemical analysis－Sputter depth profiling－Optimization using layered systems as reference materials
KS B ISO 5436-1:2004 Geometrical Product Specifications(GPS)-Surface texture:Profile method;Measurement standards-Part 1:Material measures
KS B ISO 5436-1:2014 Geometrical Product Specifications(GPS) — Surface texture: Profile method; Measurement standards — Part 1: Material measures
KS B ISO 13565-3:2014 Geometrical Product Specifications(GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 3: Height characterization using the material probability curve
KS B ISO 13565-3:2005 Geometrical Product Specifications(GPS)-Surface texture:Profile method;Surfaces having stratified functional properties-Part 3:Height characterization using the material probability curve
KS D ISO 20341:2005 Surface chemical analysis－Secondary-ion mass spectrometry－Method for estimating depth resolution parameters with multiple delta-layer reference materials
KS M ISO 4618-3:2012 Paints and varnishes-Terms and definitions for coating materials-Part 3:Surface preparation and methods of application
KS D ISO 14237:2003 Surface chemical analysis－Secondary-ion mass spectrometry－Determination of boron atomic concentration in silicon using uniformly doped materials
KS P ISO 7206-2:2018 Implants for surgery — Partial and total hip joint prostheses — Part 2: Articulating surfaces made of metallic, ceramic and plastics materials
KS M ISO 4618-3-2002(2007) Paints and varnishes－Terms and definitions for coating materials－Part 3：Surface preparation and methods of application
KS D ISO 18118-2005(2020) Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of h
KS D ISO 18118:2005 Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
KS X ISO 11084-1:2006 Graphic technology－Register systems for photographic materials, foils and paper－Part 1：Three-pin systems

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Material Surface Analysis Technology

GB/T 4656.1-2000 Technical drawings-Simplified representation of bars and profile sections
GB/T 4656-2008 Technical drawings.Simplified representation of bars and profile sections
GB/T 43087-2023 Method for determining the interface position in cross-sectional images of layered materials using microbeam analysis and electron microscopy
GB/T 18838.1-2002 Preparation of steel substrates before application of paints and related products--Specifications for metallic blast-cleaning abrasives--General introduction and classification
GB/T 13288.1-2008 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned substrates.Part 1:Specification and definitions for ISO surface profile comparators for the assessment of abrasive blast-c
GB/T 17850.1-2002 Preparation of steel substrates before application of paints and related products--Specifications for non-metallic blast-cleaning abrasives--General introduction and classification
GB/T 18838.5-2015 Preparation of steel substrates before application of paints and related products.Specifications for metallic blast-cleaning abrasives.Part 5:Steel cut wire shot
GB/T 18838.4-2008 Preparation of steel substrates before application of paints and related products.Specifications for metallic blast-cleaning abrasives.Part 4:Low-carbon cast-steel shot
GB/T 17850.6-2011 Preparation of steel substrates before application of paints and related products.Specifications for non-metallic blast-cleaning abrasives.Part 6:Iron furnace slag
GB/T 17850.3-1999 Preparation of steel substrates before application of paints and related products--Specifications for non-metallic blast-cleaning abrasives--Copper refinery slag
GB/T 18838.3-2008 Preparation of steel substrates before application of paints and related products.Specifications for metallic blast-cleaning abrasives.Part 3:High-carbon cast-steel shot and grit
GB/T 17850.11-2011 Preparation of steel substrates before application of paints and related products.Specifications for non-metallic blast-cleaning abrasives.Part 11: Special type grit of steel slag
GB/T 20935.3-2009 Method of electromagnetic acoustic inspection for metal materials.Part 3:Standard test method for ultrasonic surface examinations using electromagnetic acoustic transducer(EMAT)techniques
GB/T 30702-2014 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials

European Committee for Standardization (CEN), Material Surface Analysis Technology

EN 10221:1995 Surface quality classes for hot-rolled bars and rods - Technical delivery conditions
EN ISO/TS 80004-4:2014 Nanotechnologies - Vocabulary - Part 4: Nanostructured materials
EN ISO 13565-2:1997 Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Surfaces Having Stratified Functional Properties - Part 2: Height Characterization Using the Linear Material Ratio Curve
EN ISO 13565-3:2000 Geometrical Product Specifications (GPS) Surface texture: Profile method; Surfaces having stratified functional properties Part 3: Height characterization using the material probability curve ISO 13565-3:1998

Association Francaise de Normalisation, Material Surface Analysis Technology

NF ISO 14237:2010 Analyse chimique des surfaces - Spectrométrie de masse des ions secondaires - Dosage des atomes de bore dans le silicium à l'aide de matériaux dopés uniformément
NF E05-031-73*NF EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture : Areal - Part 73 : terms and definitions for surface defects on material measures
NF ISO 14606:2008 Analyse chimique des surfaces - Profilage d'épaisseur par bombardement - Optimisation à l'aide de systèmes mono- ou multicouches comme matériaux de référence
NF EN 17114:2018 Conservation du patrimoine culturel - Protection de surface des matériaux inorganiques poreux - Fiches de données techniques et chimiques des produits hydrofuges
NF X80-043*NF EN 17114:2018 Conservation of cultural heritage - Surface protection for porous inorganic materials - Technical and chemical data sheets of water repellent product
NF P11-213-3/A1:2007 DTU 13.3 - Paving - Design, calculation and production - Part 3 : contract bill of technical clauses for paving for single-family houses.
NF P11-213-1/A1:2007 DTU 13.3 - Paving - Design, calculation and production - Part 1 : contract bill of technical clauses for paving for industrial or related use.
NF A35-564-3:2002 Steel rod, bars and wire for cold heading and cold extrusion - Part 3 : technical delivery conditions for case hardening steels.
NF ISO 23812:2009 Analyse chimique des surfaces - Spectrométrie de masse des ions secondaires - Méthode pour l'étalonnage de la profondeur pour le silicium à l'aide de matériaux de référence à couches delta multiples
NF P11-213-3:2005 DTU 13.3 - Paving - Design, calculation and production - Part 3 : contract bill of technical clauses for paving for single-family houses.
NF A37-505-2:2000 Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 2 : case hardening steels.
NF P11-213-1:2005 DTU 13.3 - Paving - Design, calculation and production - Part 1 : contract bill of technical clauses for paving for industrial or related use.
NF EN 4408-003:2005 Série aérospatiale - Dessins techniques - Représentation des articles en matériaux composites - Partie 3 : articles intégrant des matériaux d'âme
NF P11-213-2:2005 DTU 13.3 - Paving - Design, calculation and production - Part 2 : contract bill of technical clauses for paving for use other than industrial or related uses.
NF P11-213-2/A1:2007 DTU 13.3 - Paving - Design, calculation and production - Part 2 : contract bill of technical clauses for paving for use other than industrial or related uses.
NF EN 10263-3:2017 Barres, fil machine et fil en acier pour transformation à froid et extrusion à froid - Partie 3 : conditions techniques de livraison des aciers de cémentation
NF EN 4408-005:2005 Série aérospatiale - Dessins techniques - Représentation des articles en matériaux composites - Partie 5 : coutures
NF T35-503-1*NF EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1 : specifications and definitions for ISO surface profile comparators for the assessment of abr
NF L07-215-003*NF EN 4408-003:2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 3 : parts including core materials
NF A35-564-3*NF EN 10263-3:2017 Steel rod, bars and wire for cold heading and cold extrusion - Part 3 : technical delivery conditions for case hardening steels
NF T35-502-6:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6 : extraction of soluble contaminants for analysis - The Bresle method.
NF EN 4408-001:2005 Série aérospatiale - Dessins techniques - Représentation des articles en matériaux composites - Partie 1 : règles générales
NF EN 4408-002:2005 Série aérospatiale - Dessins techniques - Représentation des articles en matériaux composites - Partie 2 : articles drapés
NF EN 4408-006:2005 Série aérospatiale - Dessins techniques - Représentation des articles en matériaux composites - Partie 6 : préformes
NF S94-175-2/A1*NF ISO 7207-2/A1:2016 Implants for surgery - Components for partial and total knee joint prostheses - Part 2 : articulating surfaces made of metal, ceramic and plastics materials - Amendment 1
NF L07-215-005*NF EN 4408-005:2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 5 : seams.
NF ISO 7207-2/A2:2020 Implants chirurgicaux - Éléments de prothèses partielle et totale de l'articulation du genou - Partie 2 : surfaces articulaires constituées de matériaux métalliques, céramiques et plastiques - Amendement 2
NF ISO 7207-2/A1:2016 Implants chirurgicaux - Éléments de prothèses partielle et totale de l'articulation du genou - Partie 2 : surfaces articulaires constituées de matériaux métalliques, céramiques et plastiques - Amendement 1

ES-UNE, Material Surface Analysis Technology

UNE-EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN 17114:2019 Conservation of cultural heritage - Surface protection for porous inorganic materials - Technical and chemical data sheets of water repellent product
UNE-EN 10263-3:2018 Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels
UNE-EN 4408-003:2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 3: Parts including core materials (Endorsed by AENOR in July of 2005.)
UNE-EN 4408-005:2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 5: Seams (Endorsed by AENOR in July of 2005.)
UNE-CEN/TR 17603-32-07:2022 Space engineering - Structural materials handbook - Part 7: Thermal and environmental integrity, manufacturing aspects, in-orbit and health monitoring, soft materials, hybrid materials and nanotechnologies (Endorsed by Asociación Española de Normaliz...
UNE-EN 4408-006:2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 6: Preforms (Endorsed by AENOR in July of 2005.)
UNE-EN 4408-001:2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 1: General rules (Endorsed by AENOR in July of 2005.)
UNE-EN 4408-002:2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 2: Laminated parts (Endorsed by AENOR in July of 2005.)
UNE-EN ISO 10426-1:2009/AC:2010 Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification - Technical Corrigendum 1 (ISO 10426-1:2009/Cor 1:2010) (Endorsed by AENOR in May of 2010.)

NL-NEN, Material Surface Analysis Technology

NEN 47-1970 Technical drawings. Indications of material sections on architectural drawings.

International Electrotechnical Commission (IEC), Material Surface Analysis Technology

ISO/TS 80004-4:2011 Nanotechnologies - Vocabulary - Part 4: Nanostructured materials
IEC 49/878/CD:2009 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4: Materials - Materials for Surface Acoustic Wave (SAW) devices
IEC TS 61994-4-4:2005 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4: Materials - Materials for Surface Acoustic Wave (SAW) devices
IEC TS 61994-4-4:2010 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4: Materials - Materials for surface acoustic wave (SAW) devices
IEC 49/890/DTS:2009 IEC/TS 61994-4-4, Ed. 2: Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4: Materials - Materials for Surface Acoustic Wave (SAW) devices
IEC TS 61994-4-4:2018 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-4: Piezoelectric materials - Single crystal wafers for s
IEC TS 61994-4-4:2018 RLV Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-4: Piezoelectric materials - Single crystal wafers for s
IEC TS 63070:2019 Ultrasonics - Field characterization - Infrared imaging techniques for determining temperature elevation in tissue-mimicking material and at the radiation surface of a transducer in still air

Professional Standard - Railway, Material Surface Analysis Technology

TB/T 2879.3-1998 Coatings and coatings for railway rolling stock Part 3: Specifications for surface treatment of metal and non-metal materials

CL-INN, Material Surface Analysis Technology

INDITECNOR 67-1ch-1955

Japanese Industrial Standards Committee (JISC), Material Surface Analysis Technology

JIS B 0659-1:2002 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Measurement standards -- Part 1: Material measures
JIS B 0671-3:2002 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 3: Height characterization using the material probability curve
JIS K 0143:2023 Surface chemical analysis -- Secondary-ion mass spectrometry -- Determination of boron atomic concentration in silicon using uniformly doped materials
JIS B 0671-2:2002 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 2: Height characterization using the linear material ratio curve
JIS K 0143:2000 Surface chemical analysis -- Secondary ion mass spectrometry -- Determination of boron atomic concentration in silicon using uniformly doped materials
JIS K 0156:2018 Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth calibration for silicon using multiple delta-layer reference materials
JIS K 0160:2009 Surface chemical analysis -- Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy
JIS K 0167:2011 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials

Aerospace, Security and Defence Industries Association of Europe (ASD), Material Surface Analysis Technology

ASD-STAN PREN 6084-1999 Aerospace Series Non-Metallic Materials Surfacing Films Technical Specification General Requirements (Edition P1)
ASD-STAN PREN 4408-3-2002 Aerospace Series Technical Drawings Representation of Parts Made of Composite Materials Part 3: Parts Including Core Materials (Edition P 1)
ASD-STAN PREN 4408-1-2002 Aerospace Series Technical Drawings Representation of Parts Made of Composite Materials Part 1: General Rules (Edition P 1)
ASD-STAN PREN 4408-5-2002 Aerospace Series Technical Drawings Representation of Parts Made of Composite Materials Part 5: Seams (Edition P 1)

BE-NBN, Material Surface Analysis Technology

NBN T 63-128-1980 Surface active agents - Analysis of technical alkane sulphonates - Deermination of alkane monosulphonates content
NBN EN 729-2-1994 Quality requirements for welding - Fusion welding of metallic materials - Part 2 : Comprehensive quality requirements

IX-UIC, Material Surface Analysis Technology

UIC 842-3-1979 Technical conditions for surface treatment of metallic and non-metallic materials used in rolling stock and container manufacturing

Professional Standard - Electron, Material Surface Analysis Technology

SJ/T 11743.4.4-2019 Piezoelectric and dielectric devices for frequency control and selection – Glossary – Part 4-4: Materials – Materials for surface acoustic wave (SAW) devices（IEC/TS 61994-4-4：2010，IDT）

GOSTR, Material Surface Analysis Technology

GOST 34445-2018 Nanomaterials. Nanostructured oxide magnesium. Technical requirements and test (analysis) methods
GOST 34444-2018 Nanomaterials. Nanostructured hydroxide magnesium. Technical requirements and test (analysis) methods
GOST R ISO 7207-2-2020 Implants for surgery. Components for partial and total knee joint prostheses. Part 2. Articulating surfaces made of metal, ceramic and plastics materials

Anhui Provincial Standard of the People's Republic of China, Material Surface Analysis Technology

DB34/T 4098.4-2022 Technical specification for the application of construction solid waste recycling as road materials Part 4: Pavement surface
DB34/T 4098.3-2022 Technical specification for the application of construction solid waste recycling as road materials Part 3: Pavement base

SAE - SAE International, Material Surface Analysis Technology

SAE AS6171/2-2016 Techniques for Suspect/Counterfeit EEE Parts Detection by External Visual Inspection@ Remarking and Resurfacing@ and Surface Texture Analysis Test Methods
SAE AS6171/2A-2017 Techniques for Suspect/Counterfeit EEE Parts Detection by External Visual Inspection@ Remarking and Resurfacing@ and Surface Texture Analysis Test Methods

Standard Association of Australia （SAA）, Material Surface Analysis Technology

AS ISO 18114:2006 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials
AS ISO 14237:2006 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
AS ISO 18118:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials

European Association of Aerospace Industries, Material Surface Analysis Technology

AECMA PREN 4408-5-2002 Aerospace Series Technical Drawings Representation of Parts Made of Composite Materials Part 5: Seams Edition P 1
AECMA PREN 4408-3-2002 Aerospace Series Technical Drawings Representation of Parts Made of Composite Materials Part 3: Parts Including Core Materials Edition P 1
AECMA PREN 4408-6-2002 Aerospace Series Technical Drawings Representation of Parts Made of Composite Materials Part 6: Preforms Edition P 1
AECMA PREN 4408-1-2002 Aerospace Series Technical Drawings Representation of Parts Made of Composite Materials Part 1: General Rules Edition P 1
AECMA PREN 4408-2-2002 Aerospace Series Technical Drawings Representation of Parts Made of Composite Materials Part 2: Laminated Parts Edition P 1

ES-AENOR, Material Surface Analysis Technology

IN-BIS, Material Surface Analysis Technology

IS 12375 Pt.2-1993 Implants for surgery. Partial and total hip joint prostheses. Part 2: Bearing surfaces made of metallic and plastic materials

KR-KS, Material Surface Analysis Technology

KS P ISO 7206-2-2018 Implants for surgery — Partial and total hip joint prostheses — Part 2: Articulating surfaces made of metallic, ceramic and plastics materials

RU-GOST R, Material Surface Analysis Technology

GOST R ISO 7206-2-2005 Implants for surgery. Partial and total hip joint prostheses. Part 2. Articulating surfaces made of metallic, ceramic and plastics materials
GOST R 59179-2021 Automobile roads of general use. Polymeric materials applied for waterproofing bridge deck. Technical regulations
GOST R ISO 7207-2-2005 Implants for surgery. Components for partial and total knee joint prostheses. Part 2. Articulating surfaces made of metal, ceramic and plastics materials
GOST R 56419-2015 Automobile roads of general use. Geosynthetic materials for separation of pavement layers from mineral materials. Technical requirements

Danish Standards Foundation, Material Surface Analysis Technology

DS/EN 4408-001:2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 1: General rules
DS/EN 4408-005:2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 5: Seams
DS/EN 4408-003:2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 3: Parts including core materials
DS/EN 4408-006:2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 6: Preforms
DS/EN 10263-3:2003 Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels
DS/EN 4408-002:2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 2: Laminated parts
DS/EN 1007-3:2003 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 3: Determination of filament diameter and cross-section area

Lithuanian Standards Office , Material Surface Analysis Technology

LST EN 4408-005-2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 5: Seams
LST EN 4408-001-2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 1: General rules
LST EN 4408-003-2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 3: Parts including core materials
LST EN 4408-006-2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 6: Preforms
LST EN 10263-3-2002 Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels
LST EN 4408-002-2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 2: Laminated parts
LST EN 1007-3-2003 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 3: Determination of filament diameter and cross-section area

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Material Surface Analysis Technology

PREN 4408-3-2002 Aerospace Series Technical Drawings Representation of Parts Made of Composite Materials Part 3: Parts Including Core Materials (Edition P 1)
PREN 4408-5-2002 Aerospace Series Technical Drawings Representation of Parts Made of Composite Materials Part 5: Seams (Edition P 1)
PREN 4408-6-2002 Aerospace Series Technical Drawings Representation of Parts Made of Composite Materials Part 6: Preforms (Edition P 1)
PREN 4408-2-2002 Aerospace Series Technical Drawings Representation of Parts Made of Composite Materials Part 2: Laminated Parts (Edition P 1)
PREN 4408-1-2002 Aerospace Series Technical Drawings Representation of Parts Made of Composite Materials Part 1: General Rules (Edition P 1)

AENOR, Material Surface Analysis Technology

UNE-EN 10263-3:2002 Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels.
UNE-ISO 4591:2010 Plastics -- Film and sheeting -- Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)

ANSI - American National Standards Institute, Material Surface Analysis Technology

N15.22-1975 CALIBRATION TECHNIQUES FOR THE CALORIMETRIC ASSAY OF PLUTONIUM- BEARING SOLIDS APPLIED TO NUCLEAR MATERIALS CONTROL; CORRECTION - FEBRUARY 1977 (INMM)

PT-IPQ, Material Surface Analysis Technology

NP EN ISO 4618-3:2001 Paints and varnishes Terms and definitions for caoting materials PArt 3:Surface preparation and methods of application(ISO 4618-3:1999)

IEC - International Electrotechnical Commission, Material Surface Analysis Technology

TS 63070-2019 Ultrasonics - Field characterization - Infrared imaging techniques for determining temperature elevation in tissue-mimicking material and at the radiation surface of a transducer in still air (Edition 1.0)