ZH
RU
ES

Materials and Surface Analysis

Materials and Surface Analysis, Total:499 items.

In the international standard classification, Materials and Surface Analysis involves: Analytical chemistry, Particle size analysis. Sieving, Vocabularies, Linear and angular measurements, Cutting tools, Rubber and plastics products, Packaging materials and accessories, Fluid power systems, Welding, brazing and soldering, Products of the chemical industry, Paints and varnishes, Solar energy engineering, Radiation protection, Acoustics and acoustic measurements, Road engineering, Piezoelectric and dielectric devices, Surface treatment and coating, Materials and articles in contact with foodstuffs, Optical equipment, Magnetic materials, Iron and steel products, Insulating materials, Powder metallurgy, Fertilizers, Glass, Food products in general, Kitchen equipment, Medical equipment, Testing of metals, Vibrations, shock and vibration measurements, Construction materials, Road vehicle systems, CHEMICAL TECHNOLOGY, Industrial automation systems, Electricity. Magnetism. Electrical and magnetic measurements, Heat treatment, Non-ferrous metals, Materials for the reinforcement of composites, Wastes, Sports equipment and facilities, Protection against fire, Applications of information technology, Elements of buildings, Textile fibres, Valves, Footwear, Ceramics, Floor treatment appliances, Products of the textile industry, Raw materials for rubber and plastics, Water quality, Paint coating processes, Integrated circuits. Microelectronics, Equipment for the chemical industry, Fuels, Transport, TESTING, Plastics.

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Materials and Surface Analysis

GB/T 33498-2017 Surface chemical analysis—Characterization of nanostructured materials
GB/T 32565-2016 Surface chemical analysis—Recording and reporting data in Auger electron spectroscopy (AES)
GB/T 33502-2017 Surface chemical analysis—Recording and reporting data in X-ray photoelectron spectroscopy（XPS）
GB/T 32998-2016 Surface chemical analysis—Auger electron spectroscopy—Reporting of methods used for charge control and charge correction
GB/T 17850.1-2017 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part1:General introduction and classification

International Organization for Standardization (ISO), Materials and Surface Analysis

ISO/TR 14187:2020 Surface chemical analysis — Characterization of nanostructured materials
ISO/TR 14187:2011 Surface chemical analysis - Characterization of nanostructured materials
ISO 20579-3:2021 Surface chemical analysis - Sample handling, preparation and mounting - Part 3: Biomaterials
ISO 19712-3:2007 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes
ISO 19712-3:2022 Plastics — Decorative solid surfacing materials — Part 3: Determination of properties — Solid surface shapes
ISO 22975-3:2014 Solar energy - Collector components and materials - Part 3: Absorber surface durability
ISO 14606:2022 Surface chemical analysis — Sputter depth profiling — Optimization using layered systems as reference materials
ISO/TR 16268:2009 Surface chemical analysis - Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation
ISO 19712-2:2007 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
ISO 19712-1:2008 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
ISO 25178-70:2014 Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures
ISO/CD 20263:2023 Microbeam analysis — Analytical electron microscopy — Method for the determination of interface position in the cross-sectional image of the layered materials
ISO 20263:2017 Microbeam analysis — Analytical electron microscopy — Method for the determination of interface position in the cross-sectional image of the layered materials
ISO 22415:2019 Surface chemical analysis — Secondary ion mass spectrometry — Method for determining yield volume in argon cluster sputter depth profiling of organic materials
ISO 13473-2:2002 Characterization of pavement texture by use of surface profiles - Part 2: Terminology and basic requirements related to pavement texture profile analysis
ISO 17331:2004 Surface chemical analysis - Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy
ISO 20579-4:2018 Surface chemical analysis - Guidelines to sample handling, preparation and mounting - Part 4: Reporting information related to the history, preparation, handling and mounting of nano-objects prior to surface analysis
ISO 4498-2:1981 Sintered metal materials, excluding hardmetals; Determination of apparent hardness; Part 2 : Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
ISO 20341:2003 Surface chemical analysis - Secondary-ion mass spectrometry - Method for estimating depth resolution parameters with multiple delta-layer reference materials
ISO 18554:2016 Surface chemical analysis - Electron spectroscopies - Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
ISO 25178-73:2019 Geometrical product specifications (GPS) — Surface texture: Areal — Part 73: Terms and definitions for surface defects on material measures
ISO 23812:2009 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth calibration for silicon using multiple delta-layer reference materials
ISO 19668:2017 Surface chemical analysis — X-ray photoelectron spectroscopy — Estimating and reporting detection limits for elements in homogeneous materials
ISO/TS 10303-1769:2014 Industrial automation systems and integration - Product data representation and exchange - Part 1769: Application module: Fea material aspects
ISO 27911:2011 Surface chemical analysis - Scanning-probe microscopy - Definition and calibration of the lateral resolution of a near-field optical microscope
ISO/DTR 18228-8:2023 Design using geosynthetics — Part 8: Surface erosion control
ISO 7207-2:2011 Implants for surgery - Components for partial and total knee joint prostheses - Part 2: Articulating surfaces made of metal, ceramic and plastics materials
ISO/TS 10303-1756:2010 Industrial automation systems and integration - Product data representation and exchange - Part 1756: Conductivity material aspects
ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 18118:2015 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO/DIS 18118:2023 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO/FDIS 18118:2023 Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO 21222:2020 Surface chemical analysis — Scanning probe microscopy — Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
ISO 3892:1980 Conversion coatings on metallic materials; Determination of coating mass per unit area; Gravimetric methods
ISO 4498-1:1990 Sintered metal materials, excluding hardmetals; determination of apparent hardness; part 1: materials of essentially uniform section hardness
ISO 4498-1:1978 Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 1: Materials of essentially uniform section hardness
ISO 7207-2:2011/Amd 1:2016 Implants for surgery - Components for partial and total knee joint prostheses - Part 2: Articulating surfaces made of metal, ceramic and plastics materials; Amendment 1
ISO 8504-2:2019 Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 2: Abrasive blast-cleaning
ISO 409-1:1982 Metallic materials; Hardness test; Tables of Vickers hardness values for use in tests made on flat surfaces; Part 1 : HV 5 to HV 100
ISO/TS 10303-1525:2014 Industrial automation systems and integration - Product data representation and exchange - Part 1525: Application module: Composite surface
ISO 19679:2020 Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface — Method by analysis of evolved carbon dioxide

British Standards Institution (BSI), Materials and Surface Analysis

PD ISO/TR 14187:2020 Surface chemical analysis. Characterization of nanostructured materials
21/30440164 DC BS ISO 14606. Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials
BS ISO 14606:2022 Tracked Changes. Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials
BS ISO 22415:2019 Surface chemical analysis. Secondary ion mass spectrometry. Method for determining yield volume in argon cluster sputter depth profiling of organic materials
BS ISO 19712-1:2009 Plastics. Decorative solid surfacing materials. Classification and specifications
BS EN ISO 19712-1:2013 Plastics. Decorative solid surfacing materials. Classification and specifications
18/30337640 DC BS ISO 20579-3. Surface chemical analysis. Sample handling, preparation and mounting. Part 3. Biomaterials
BS 6829-0:1991 Analysis of surface active agents (raw materials) - General introduction
BS ISO 14606:2015 Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials
BS ISO 14606:2000 Surface chemical analysis - Sputter depth profiling - Optimization using layered systems as reference materials
BS ISO 14606:2001 Surface chemical analysis - Sputter depth profiling - Optimization using layered systems as reference materials
BS 4247-2:1982 Surface materials for use in radioactive areas - Guide to the selection of materials
BS EN ISO 22975-3:2014 Solar energy. Collector components and materials. Absorber surface durability
BS EN 1388-2:1996 Materials and articles in contact with foodstuffs - Silicate surfaces - Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
BS 4247-1:1981 Surface materials for use in radioactive areas - Methods of measuring and evaluating the decontamination factor
BS 6829-1.3:1988 Analysis of surface active agents (raw materials). General methods. Method for determination of alkalinity
BS ISO 20263:2017 Microbeam analysis. Analytical electron microscopy. Method for the determination of interface position in the cross-sectional image of the layered materials
BS EN 10342:2005 Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations
BS 6233:1982 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
BS DD IEC/TS 61994-4-4:2010 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Materials Materials for surface acoustic wave (SAW) devices
BS ISO 19668:2017 Surface chemical analysis. X-ray photoelectron spectroscopy. Estimating and reporting detection limits for elements in homogeneous materials
BS ISO 20579-4:2018 Surface chemical analysis. Guidelines to sample handling, preparation and mounting. Reporting information related to the history, preparation, handling and mounting of nano-objects prior to surface analysis
BS ISO 20341:2003 Surface chemical analysis - Secondary-ion mass spectrometry - Method for estimating depth resolution parameters with multiple delta-layer reference materials
17/30347641 DC BS ISO 12107. Metallic materials. Fatigue testing. Statistical planning and analysis of data
BS ISO 13473-3:2002 Characterization of pavement texture by use of surface profiles - Specification and classification of profilometers
BS ISO 18554:2016 Surface chemical analysis. Electron spectroscopies. Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
BS 6829-4.6:1988 Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of hydroxyl value
PD ISO/TR 16268:2009 Surface chemical analysis. Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation
BS 6829-1.6:1991 Analysis of surface active agents (raw materials). General methods. Method for determination of solubility in water
BS EN 1388-1:1996 Materials and articles in contact with foodstuffs - Silicate surfaces - Determination of the release of lead and cadmium from ceramic ware
20/30409889 DC BS ISO 18114. Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative sensitivity factors from ion-implanted reference materials
BS 6829-4.5:1989 Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of sulphated ash
22/30454328 DC BS EN 15330-5. Surfaces for sport areas. Synthetic turf and textile sports surfaces. - Part 5. Specification for infill materials
BS ISO 18114:2021 Tracked Changes. Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative sensitivity factors from ion-implanted reference materials
BS 5131-2.11:1983 Methods of test for footwear and footwear materials - Solings - Resistance of solings to short-term contact with a hot surface
BS 5131 Sec.2.11:1983 Methods of test for footwear and footwear materials. Solings. Resistance of solings to short-term contact with a hot surface
BS 6829-1.1:1987 Analysis of surface active agents (raw materials). General methods. Method for determination of mineral sulphate content
BS ISO 13565-2:1997 Geometric Product Specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties. Height characterization using the linear material ration curve
BS 6829 Sec.1.3:1988 Analysis of surface active agents (raw materials). General methods. Method for determination of alkalinity
BS 6829-3.1:1989 Analysis of surface active agents (raw materials). Sodium alkylbenzenesulphonates. Method for determination of mean relative molecular mass
BS PD CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food — Part 1: General considerations
BS 6829-4.3:1990 Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of oxyethylene groups
BS ISO 18118:2005 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
BS 6829 Sec.1.6:1991 Analysis of surface active agents (raw materials). General methods. Method for determination of solubility in water
BS 6829-2.1:1988 Analysis of surface active agents (raw materials) - Alkane sulphonates - Method for determination of total alkaline sulphonates content
BS 6829-2.3:1989 Analysis of surface active agents (raw materials). Alkane sulphonates. Method for determination of alkane monosulphonates content
BS 6829-1.2:1988 Analysis of surface active agents (raw materials). General methods. Method for determination of free alkalinity or free acidity
23/30461294 DC BS ISO 18118. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
23/30454432 DC BS EN IEC 60404-1-1 AMD 1. Magnetic materials - Part 1-1. Classification. Surface insulations of electrical steel sheet, strip and laminations
BS 594-1:2002 Hot rolled asphalt for roads and other paved areas - Specification for constituent materials and asphalt mixtures
BS ISO 21222:2020 Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
BS ISO 18118:2015 Tracked Changes. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
BS 6829 Sec.4.6:1988 Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of hydroxyl value
BS EN ISO 13565-3:2000 Geometric Product Specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties. Height characterization using the material probability curve
BS ISO 7206-2:2011 Implants for surgery. Partial and total hip joint prostheses. Articulating surfaces made of metallic, ceramic and plastics materials
BS 6829 Sec.1.1:1987 Analysis of surface active agents (raw materials). General methods. Method for determination of mineral sulphate content
19/30351707 DC BS ISO 21222. Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
12/30273254 DC BS ISO 22975-3. Solar Energy-Collector components and materials. Part 3. Absorber surface durability

Taiwan Provincial Standard of the People's Republic of China, Materials and Surface Analysis

CNS 5265-1986 Method of Test for Sieve Analysis of Mineral Filler for Road and Paving Materials

American Society for Testing and Materials (ASTM), Materials and Surface Analysis

ASTM E673-98E1 Standard Terminology Relating to Surface Analysis
ASTM E673-01 Standard Terminology Relating to Surface Analysis
ASTM E673-03 Standard Terminology Relating to Surface Analysis
ASTM E673-02 Standard Terminology Relating to Surface Analysis
ASTM E673-02b Standard Terminology Relating to Surface Analysis
ASTM E673-02a Standard Terminology Relating to Surface Analysis
ASTM E1257-93(2003) Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis
ASTM F607-03(2019) Standard Test Method for Adhesion of Gasket Materials to Metal Surfaces
ASTM D1331-14 Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials
ASTM E1257-93(2008) Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis
ASTM E1257-93(1998)e1 Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis
ASTM E1257-16 Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis
ASTM E135-07a Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E135-07 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E135-23a Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E135-23 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM D451-91(2002) Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
ASTM E135-11a Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E135-11b Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM UOP964-98 Surface Area, Pore Volume, Average Pore Diameter and Pore Diameter Distribution of Porous Materials
ASTM D451-91(2008) Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
ASTM D451/D451M-91(2013)e1 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
ASTM D452/D452M-91(2013)e1 Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
ASTM UOP964-11 Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption
ASTM E2768-11(2018) Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)

German Institute for Standardization, Materials and Surface Analysis

DIN 66142-2:1981 Representing and characterizing the separation of disperse materials; Application to analytical separation processes
DIN 10050-7:1973 Testing of butter wrappers, determination of water soluble components of the surface of the wrapper contacting butter
DIN ISO 13473-2:2004 Characterization of pavement texture by use of surface profiles - Part 2: Terminology and basic requirements related to pavement texture profile analysis (ISO 13473-2:2002)
DIN ISO 13473-2:2004-07 Characterization of pavement texture by use of surface profiles - Part 2: Terminology and basic requirements related to pavement texture profile analysis (ISO 13473-2:2002)
DIN EN ISO 19712-2:2013-04 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007); German version EN ISO 19712-2:2013
DIN EN ISO 19712-3:2022-07 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022); German version EN ISO 19712-3:2022
DIN EN 10342:2005-09 Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations; German version EN 10342:2005
DIN EN ISO 25178-70:2014-06 Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014); German version EN ISO 25178-70:2014
DIN EN 1388-2:1995-11 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware; German version EN 1388-2:1995
DIN EN 15330-5:2022-08 Surfaces for sport areas - Synthetic turf and textile sports surfaces - Part 5: Specification for infill materials; German and English version prEN 15330-5:2022 / Note: Date of issue 2022-07-15
DIN EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007); German version EN ISO 19712-3:2013
DIN 2311-1:1998 Specification and approval of laser beam surface treatment using additional materials - Part 1: Laser surface treatment specification using consumables
DIN EN 13892-6:2003 Methods of test for screed materials - Part 6: Determination of surface hardness; German version EN 13892-6:2002
DIN EN 10342:2005 Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations; German version EN 10342:2005
DIN-Fachbericht CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1: General considerations; English version CEN/TR 15356-1:2006
DIN EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
DIN EN ISO 25178-73:2019-10 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019); German version EN ISO 25178-73:2019
DIN 17022-5:2000 Heat treatment of ferrous materials - Methods of heat treatment - Part 5: Surface hardening
DIN EN 1388-2:1995 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware; German version EN 1388-2:1995
DIN EN 13892-6:2003-02 Methods of test for screed materials - Part 6: Determination of surface hardness; German version EN 13892-6:2002
DIN 58298-19:2002-07 Materials, finish and testing of medical instruments - Part 19: Trocars
DIN EN 12944-2:2000-03 Fertilizers and liming materials - Vocabulary - Part 2: Terms relating to fertilizers (including corrigendum AC:2000); German version EN 12944-2:1999 + AC:2000
DIN 58298-20:2003-11 Materials, finish and testing of medical instruments - Part 20: Instruments for use with trocars according to DIN 58298-19
DIN EN 1388-1:1995-11 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 1: Determination of the release of lead and cadmium from ceramic ware; German version EN 1388-1:1995
DIN EN ISO 8502-4:1999 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:1993); Germa
DIN 17022-3:1989 Heat treatment of ferrous materials; heat treatment methods; case hardening
DIN 30912-4:1990 Sintered metal materials; sint-guide-lines; part 4: surface-treatment of sintered parts
DIN 30912-4:1990-10 Sintered metal materials; sint-guide-lines; part 4: surface-treatment of sintered parts
DIN 51456:2013-10 Testing of materials for semiconductor technology - Surface analysis of silicon wafers by multielement determination in aqueous analysis solutions using mass spectrometry with inductively coupled plasma (ICP-MS)
DIN EN ISO 22975-3:2014-10 Solar energy - Collector components and materials - Part 3: Absorber surface durabillity (ISO 22975-3:2014); German version EN ISO 22975-3:2014
DIN 17022-5:2000-03 Heat treatment of ferrous materials - Methods of heat treatment - Part 5: Surface hardening
DIN EN ISO 11124-1:1997 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11124-1:1993); German version EN ISO 11124-1:1997
DIN EN ISO 22975-3:2014 Solar energy - Collector components and materials - Part 3: Absorber surface durabillity (ISO 22975-3:2014); German version EN ISO 22975-3:2014
DIN IEC/TS 61994-4-4:2011 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4: Materials - Materials for surface acoustic wave (SAW) devices (IEC/TS 61994-4-4:2010)
DIN 65533:2011-06 Aerospace - Bolts, screws and nuts - Allocation of materials and surface treatments, recommended selection; Text in German and English
DIN 51456:2013 Testing of materials for semiconductor technology - Surface analysis of silicon wafers by multielement determination in aqueous analysis solutions using mass spectrometry with inductively coupled plasma (ICP-MS)
DIN 28055-1:2002 Chemical apparatus - Surface protection with organic linings for application to metallic components - Part 1: Requirements
DIN 54385:2016 Solid recovered fuels - Collection of representative analytical samples from heterogeneous materials of low bulk density using the pressing-drill method
DIN 54385:2016-08 Solid recovered fuels - Collection of representative analytical samples from heterogeneous materials of low bulk density using the pressing-drill method
DIN EN ISO 13565-2:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996); German version EN ISO 13565-2:1997
DIN IEC/TS 61994-4-4:2011-11*DIN SPEC 41994-4-4:2011-11 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4: Materials - Materials for surface acoustic wave (SAW) devices (IEC/TS 61994-4-4:2010)
DIN EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
DIN EN ISO 11124-2:1997 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:1993); German version EN ISO 11124-2:1997
DIN 65533:1987 Aerospace; bolts, screws and nuts; allocation of materials and surface treatments; recommended selection
DIN EN 1388-1:1995 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 1: Determination of the release of lead and cadmium from ceramic ware; German version EN 1388-1:1995
DIN EN ISO 13565-3:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve (ISO 13565-3:1998); German version EN ISO 13565-3:2000
DIN EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007); German version EN ISO 19712-2:2013
DIN EN ISO 11124-4:1997 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:1993); German version EN ISO 11124-4:1997
DIN EN ISO 8504-1:2002 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000); German version EN ISO 8504-1:2001
DIN 50988-2:1988 Measurement of coating thickness; determination of the mass per unit area of zinc and tin-coatings on ferrous materials by dissolution of the coating material; volumetric method
DIN EN ISO 19712-1:2013 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications (ISO 19712-1:2008); German version EN ISO 19712-1:2013

BR-ABNT, Materials and Surface Analysis

ABNT MB-490-1972

CN-STDBOOK, Materials and Surface Analysis

图书 A-4619 Material quality inspection and analysis technology

未注明发布机构, Materials and Surface Analysis

BS 6829-0:1991(2008) Analysis of surface active agents (raw materials) — Part 0 : General introduction
BS ISO 20341:2003(2010) Surface chemical analysis — Secondary - ion mass spectrometry — Method for estimating depth resolution parameters with multiple delta - layer reference materials
BS EN 1388-2:1996(2004) Materials and articles in contact with foodstuffs — Silicate surfaces — Part 2 : Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
BS 6324-3:1983(1999) Terms relating to surgical implants — Part 3 : Glossary of terms relating to materials
DIN EN ISO 19712-3:2022 Plastics – Decorative solid surface materials – Part 3: Test methods – Molded parts
BS EN 1388-1:1996(2004) Materials and articles in contact with foodstuffs — Silicate surfaces — Part 1 : Determination of the release of lead and cadmium from ceramic ware
BS EN ISO 13565-2:1998(1999) Geometric Product Specifications (GPS) — Surface texture : Profile method — Surfaces having stratified functional properties — Part 2 : Height characterization using linear material ratio curve

Association Francaise de Normalisation, Materials and Surface Analysis

NF T54-370-3:2013 Plastics - Decorative solid surfacing materials - Part 3: determination of properties - Solid surface shapes
NF ISO 14237:2010 Analyse chimique des surfaces - Spectrométrie de masse des ions secondaires - Dosage des atomes de bore dans le silicium à l'aide de matériaux dopés uniformément
NF EN ISO 19712-1:2013 Plastiques - Matériaux décoratifs massifs de revêtement de surface - Partie 1 : classification et spécifications
NF P50-530-3*NF EN ISO 22975-3:2014 Solar energy - Collectors components and materials - Part 3 : Absorber surface durability
NF T54-370-3*NF EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3 : determination of properties - Solid surface shapes
NF EN ISO 105-X07:1997 Textiles - Essais de solidité des teintures - Partie X07 : solidité des teintures à la surteinture : laine.
NF X30-408:2020 Déchets ménagers et assimilés - Méthode de caractérisation - Analyse sur produit brut
BP X10-043:2009 Caractérisation sensorielle des matériaux - Recommandations pratiques pour l'analyse acoustique
NF ISO 14606:2008 Analyse chimique des surfaces - Profilage d'épaisseur par bombardement - Optimisation à l'aide de systèmes mono- ou multicouches comme matériaux de référence
NF C28-905*NF EN 10342:2005 Magnetic materials - Classification of surface insulations of electrical steel, strip and laminations
NF T54-370-2*NF EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2 : determination of properties - Sheet goods
BP X10-041:2004 Caractérisation sensorielle des matériaux - Recommandations pratiques pour l'analyse tactile de la matière première au produit fini
BP X10-042:2006 Caractérisation sensorielle des matériaux - Recommandations pratiques pour l'analyse visuelle de la matière première au produit fini
NF E05-031-70*NF EN ISO 25178-70:2014 Geometrical product specification (GPS) - Surface texture : areal - Part 70 : material measures
NF A95-321-2:1988 Powder metallurgy. Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 2 : case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen.
NF EN ISO 19712-2:2013 Plastiques - Matériaux décoratifs massifs de revêtement de surface - Partie 2 : détermination des propriétés - Produits en feuilles
NF T54-370-1*NF EN ISO 19712-1:2013 Plastics - Decorative solid surfacing materials - Part 1 : classification and specifications
NF EN 1388-2:1996 Matériaux et articles en contact avec les denrées alimentaires - Surfaces silicatées - Partie 2 : détermination de l'émission de plomb et de cadmium par les surfaces silicatées autres que les articles en céramique.
NF E05-031-73*NF EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture : Areal - Part 73 : terms and definitions for surface defects on material measures
NF EN ISO 25178-70:2014 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 70 : mesures matérialisées
NF EN 10163-3:2005 Conditions de livraison relatives à l'état de surface des tôles, larges plats et profilés en acier laminés à chaud - Partie 3 : profilés
NF ISO 23812:2009 Analyse chimique des surfaces - Spectrométrie de masse des ions secondaires - Méthode pour l'étalonnage de la profondeur pour le silicium à l'aide de matériaux de référence à couches delta multiples
BP X10-040:2003 Caractérisation sensorielle des matériaux - Méthodologie générale - Recommandations méthodologiques pour l'analyse sensorielle de la matière première au produit fini
NF P14-204-6*NF EN 13892-6:2003 Methods of test for screed materials - Part 6 : determination of surface hardness
NF EN 10342:2005 Matériaux magnétiques - Classification des isolations de surface des tôles, bandes et lamelles magnétiques en acier
NF EN ISO 19712-3:2022 Plastiques - Matériaux décoratifs massifs de revêtement de surface - Partie 3 : détermination des propriétés - Produits mis en forme
NF EN 13892-6:2003 Méthodes d'essai des matériaux pour chapes - Partie 6 : détermination de la dureté de la surface
NF EN 1388-1:1996 Matériaux et articles en contact avec les denrées alimentaires - Surfaces silicatées - Partie 1 : détermination de l'émission de plomb et de cadmium par les articles en céramique.
NF D25-501-1*NF EN 1388-1:1996 Materials and articles in contact with foodstuffs. Silicate surfaces. Part 1 : determination of the release of lead and cadmium from ceramic ware.
NF T35-502-6:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6 : extraction of soluble contaminants for analysis - The Bresle method.
NF D25-501-2*NF EN 1388-2:1996 Materials and articles in contact with foodstuffs. Silicate surfaces. Part 2 : determination of the release of lead and cadmium from silicate surface other than ceramic ware.
NF P98-631:1991 Horizontal road marking. Markings applied on the roads. Analysis of mineral powder extracted from white marking product by conventional chemical methods.
NF A91-474:1995 CONVERSION COATINGS ON METALLIC MATERIALS. DETERMINATION OF COATING MASS PER UNIT AREA. GRAVIMETRIC METHODS. (EUROPEAN STANDARD EN ISO 3892).
NF T35-501-4:2020 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4 : initial surface conditions, preparation grades and flash rust grades in connection with water jetting
NF A91-474*NF EN ISO 3892:2001 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods
NF C26-631-3-2*NF EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2 : determination of resistive properties (DC Methods) - Surface resistance and surface resistivity
FD D25-116-1*FD CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1 : general considerations
NF EN IEC 60404-11:2021 Matériaux magnétiques - Partie 11 : méthodes de mesurage de la résistance d'isolement superficiel des bandes et tôles en acier électrique
NF E05-023:2002 Geometrical Product Specification (GPS) - Surface texture : profile method - Surfaces having stratified functional properties - Part 3 : height characterization using the material probability curve.
NF A40-501-2:1991 Delivery equipments for surface condition of hot rolled steel plates, wide flats and sections. Part 2 : plates and wide flats.
NF A95-321-1:1993 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 1 : materials of essentially uniform section hardness.
NF C28-901-11*NF EN 60404-11:2013 Magnetic materials - Part 11 : method of test for the determination of surface insulation resistance of magnetic sheet and strip
NF E05-053-1*NF EN ISO 5436-1:2000 Geometrical product specifications (GPS) - Surface texture : profile method : measurement standards - Part 1 : material measures
NF C28-901-11:2021 Magnetic materials - Part 11 : methods of measurement of the surface insulation resistance of electrical steel strip and sheet
NF EN 62631-3-2:2016 Propriétés diélectriques et résistives des matériaux isolants solides - Partie 3-2 : détermination des propriétés résistives (Méthodes en courant continu) - Résistance superficielle et résistivité superficielle
NF ISO 7206-2:2011 Implants chirurgicaux - Prothèses partielles et totales de l'articulation de la hanche - Partie 2 : surfaces articulaires constituées de matériaux métalliques, céramiques et plastiques

Korean Agency for Technology and Standards (KATS), Materials and Surface Analysis

KS D ISO 14606:2003 Surface chemical analysis－Sputter depth profiling－Optimization using layered systems as reference materials
KS D ISO 4498-2-2001(2006) Sintered metal materials, excluding hardmetals-Determination of apparent hardness-Part 2：Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
KS B ISO 18437-5:2017 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 5: Poisson ratio based on comparison between measurements and finite element analysis
KS D ISO 20341:2005 Surface chemical analysis－Secondary-ion mass spectrometry－Method for estimating depth resolution parameters with multiple delta-layer reference materials
KS M ISO 8504-2-2012(2017) Preparation of steel substrates before application of paints and related products－Surface preparation methods－Part 2：Abrasive blast-cleaning
KS B ISO 10303-209-2009(2020) Industrial automation systems and integration－Product data representation and exchange－Part 209：Application protocol：Composite and metallic structural analysis and related design
KS D ISO 14237:2003 Surface chemical analysis－Secondary-ion mass spectrometry－Determination of boron atomic concentration in silicon using uniformly doped materials
KS D ISO 1190-1:2002 Cooper and copper alloys-Code of designation-Part 1:Designation of materials
KS D ISO 1190-1:2015 Cooper and copper alloys-Code of designation-Part 1:Designation of materials
KS M 3099-2012 Plastics－Quantitative evaluation of scratch-induced damages on polymeric and coating materials－Part 1： Under a constant load condition
KS K 0828-2016 Test method for quantitative analysis of composition of blended filling materialsdown and feathers blended with polyester
KS G ISO 8442-6:2020 Materials and articles in contact with foodstuffs —Cutlery and table holloware — Part 6: Lightly silver-plated table holloware protected by lacquer
KS D ISO 18118-2005(2020) Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of h
KS P ISO 7207-2:2012 Implants for surgery－Components for partial and total knee joint prostheses－Part 2：Articulating surfaces made of metal, ceramic and plastics materials
KS M ISO 8504-3-2002(2017) Preparation of steel substrates before application of paints and related products－Surface preparation methods－Part 3：Hand- and power-tool cleaning
KS D ISO 18118:2005 Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
KS C IEC 60404-11:2002 Magnetic materials-Part 11:Methods of test for thedetermination of surface insulation resistance of magnetic sheet and strip
KS B ISO 22975-3:2016 Solar energy ― Collector components and materials ― Part 3: Absorber surface durability
KS B ISO 22975-3-2016(2021) Solar energy ― Collector components and materials ― Part 3: Absorber surface durability
KS C IEC 60404-11:2017 Magnetic materials－Part 11：Methods of test for thedetermination of surface insulation resistance of magnetic sheet and strip
KS K 0828-2016(2021) Test method for quantitative analysis of composition of blended filling materialsdown and feathers blended with polyester
KS M ISO 11125-4-2002(2017) Preparation of steel substrates before application of paints and related products－Test methods for metallic blast-cleaning abrasives－Part 4：Determination of apparent density
KS D ISO 3892:2002 Conversion coatings on metallic materials－Determination of coating mass per unit area－Gravimetric methods
KS D ISO 1460-2002(2017) Hot dip galvanized coating on ferrous materials - Gravimetric determination of the mass per unit area
KS D ISO 4498-1-2001(2006) Sintered metal materials, excluding hardmetals-Determination of apparent hardness－Part 1：Materials of essentially uniform section hardness
KS B ISO 13565-3-2014(2019) Geometrical Product Specifications(GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 3: Height characterization using the material probability curve
KS C IEC 62631-3-2:2017 Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
KS C IEC 62631-3-2-2017(2022) Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
KS M ISO 4618-3:2012 Paints and varnishes-Terms and definitions for coating materials-Part 3:Surface preparation and methods of application
KS C IEC 60404-11-2017(2022) Magnetic materials－Part 11：Methods of test for thedetermination of surface insulation resistance of magnetic sheet and strip
KS B ISO 13565-2-2014(2019) Geometrical Product Specifications(GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 2: Height characterization using the linear material ratio curve
KS M ISO 8503-5:2018 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determinat
KS P ISO 7206-2:2018 Implants for surgery — Partial and total hip joint prostheses — Part 2: Articulating surfaces made of metallic, ceramic and plastics materials
KS B ISO 5436-1-2014(2019) Geometrical Product Specifications(GPS) — Surface texture: Profile method; Measurement standards — Part 1: Material measures
KS M ISO 8502-6:2012 Preparation of steel substrates before application of paints and related products－Tests for the assessment of surface cleanliness－Part 6：Extraction of soluble contaminants for analysis－The Bresle method

RU-GOST R, Materials and Surface Analysis

GOST 11930.0-1979 Hard-facind materials. General requirements for methods of analysis
GOST R ISO 7206-2-2005 Implants for surgery. Partial and total hip joint prostheses. Part 2. Articulating surfaces made of metallic, ceramic and plastics materials

Standard Association of Australia （SAA）, Materials and Surface Analysis

AS 4049.3:2005/Amdt 1:2006
AS 4049.3/AMD 1:2006 Amendment No.1 to AS 4049.3-2005 Paints and related--Pavement marking materials Part 3: Waterborne paint--For use with surface applied glass beads
AS 4049.3:2005 Paints and related materials - Pavement marking materials - Waterborne paint - For use with surface applied glass beads
AS ISO 18114:2006 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials
AS ISO 14237:2006 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
AS ISO 18118:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
IEC 62631-3-2:2023 Dielectric and resistive properties of solid insulating materials — Part 3-2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
IEC 62631-3-2:2023 CMV Dielectric and resistive properties of solid insulating materials — Part 3-2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity

SAE - SAE International, Materials and Surface Analysis

SAE PT-166-2014 CAE Design and Failure Analysis of Automotive Composites
SAE PT-201-2019 Multidisciplinary Design Analysis and Optimization of Aerospace Composites

European Committee for Standardization (CEN), Materials and Surface Analysis

EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes
EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022)
EN ISO 19712-1:2013 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
EN ISO 25178-70:2014 Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014)
EN 12944-2:1999 Fertilizers and Liming Materials - Vocabulary - Part 2: Terms Relating to Fertilizers
EN 1388-2:1995 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
EN 10163-2:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: plate and wide flats
EN 10342:2005 Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations
EN 13892-6:2002 Methods of test for screed materials - Part 6: Determination of surface hardness
EN 12582:1999 Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD
EN 1388-1:1995 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 1: Determination of the release of lead and cadmium from ceramic ware
PD CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1: General considerations
EN ISO 8502-4:2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:2017)
EN ISO 8502-3:1999 Preparation of Steel Substrates Before Application of Paints and Related Products - Test for the Assessment of Surface Cleanliness Part 3: Assessment of Dust on Steel Surfaces Prepared for Painting (Presssure-Sensitive Tape Method) ISO 8502-3:1992
EN ISO 3892:1994 Conversion Coatings on Metallic Materials - Determination of Coating Mass per Unit Area - Gravimetric Methods (ISO 3892 : 1980)
EN ISO 11124-1:1997 Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives - Part 1: General Introduction and Classification
EN ISO 11124-1:2018 Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives - Part 1: General Introduction and Classification
EN ISO 11124-5:2021 Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives - Part 1: General Introduction and Classification
EN ISO 8502-4:1999 Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness - Part 4: Guidance on the Estimation of the Probability of Condensation Prior to Paint Application ISO 8502-4:1993
CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1: General considerations
EN ISO 8503-4:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast -Cleaned Steel Substrates - Part 4: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of
EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
prEN 24498-1-1992 Sintered metal materials, excluding hardmetals; determination of apparent hardness; part 1: materials of essentially uniform section hardness (ISO 4498-1:1990)
EN ISO 11124-2:1997 Preparation of Steel Substrates before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives - Part 2: Chilled-Iron Grit
EN ISO 11124-4:1997 Preparation of Steel Substrates before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives - Part 4: Low-Carbon Cast-Steel Shot
EN ISO 13565-2:1997 Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Surfaces Having Stratified Functional Properties - Part 2: Height Characterization Using the Linear Material Ratio Curve
EN ISO 19679:2020 Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2020)
EN ISO 3892:2001 Conversion Coatings on Metallic Materials - Determination of Coating Mass Per Unit Area - Gravimetric Methods ISO 3892:2000
EN ISO 22975-3:2014 Solar energy - Collector components and materials - Part 3: Absorber surface durability

ES-UNE, Materials and Surface Analysis

UNE-EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022)
UNE-EN ISO 25178-70:2014 Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014) (Endorsed by AENOR in January of 2015.)
UNE-EN 1388-2:1995 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
UNE-EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN 1388-1:1995 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 1: Determination of the release of lead and cadmium from ceramic ware (Endorsed by AENOR in February of 1996.)
UNE-EN IEC 60404-12:2023 Magnetic materials - Part 12: Methods of test for the assessment of the thermal endurance of surface insulation coatings on electrical steel strip and sheet (Endorsed by Asociación Española de Normalización in May of 2023.)
UNE-EN IEC 60404-11:2021 Magnetic materials - Part 11: Methods of measurement of the surface insulation resistance of electrical steel strip and sheet (Endorsed by Asociación Española de Normalización in October of 2021.)
UNE-EN 60404-11:2013 Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip (Endorsed by AENOR in March of 2013.)
UNE-EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity (Endorsed by AENOR in April of 2016.)

PT-IPQ, Materials and Surface Analysis

NP 2126-1986

Danish Standards Foundation, Materials and Surface Analysis

DS/EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes
DS/EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
DS/EN ISO 19712-1:2013 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
DS/EN 1388-2:1996 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
DS/EN ISO 13565-3:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material propability curve
DS/EN 10342:2005 Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations
DS/EN 13965-1:2004 Characterization of waste - Terminology - Part 1: Material related terms and definitions
DS/EN 60404-11:2013 Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip
DS/EN 13892-6:2003 Methods of test for screed materials - Part 6: Determination of surface hardness
DS/EN 1388-1:1996 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 1: Determination of the release of lead and cadmium from ceramic ware
DS/EN ISO 13565-2/Corr. 1:2007 Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve
DS/EN ISO 13565-2:1998 Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve
DS/ISO 3892:1983 Conversion coatings on metallic materials. Determination of coating mass per unit area. Gravimetric methods
DS/IEC TS 62885-1:2020 Surface cleaning appliances – Part 1: General requirements on test material and test equipment
DS/CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1: General considerations
DS/EN IEC 60404-11:2021 Magnetic materials – Part 11: Methods of measurement of the surface insulation resistance of electrical steel strip and sheet
DS/EN 24498-1:1994 Sintered metal materials,excluding hardmetals-Determination of apparent hardness-Part 1:Materials of essentially uniform section hardness
DS/ISO 1460:1980 Metallic coatings. Hot dip galvanized coatings on ferrous materials. Determination of the mass per unit area. Gravimetric method
DS/EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced

American Society of Civil Engineers (ASCE), Materials and Surface Analysis

ASCE GSP 176-2007 ANALYSIS OF ASPHALT PAVEMENT MATERIALS AND SYSTEMS EMERGING METHODS

IN-BIS, Materials and Surface Analysis

IS 2338 Pt.2-1967
IS 3810 Pt.2-1977
IS 13795 Pt.1-1993 Glossary of terms relating to special alloys. Part 1: Soft magnetic materials
IS 9845-1986
IS 6461 Pt.2-1972
IS 12375 Pt.2-1993 Implants for surgery. Partial and total hip joint prostheses. Part 2: Bearing surfaces made of metallic and plastic materials
IS 2380 Pt.11-1977

国家市场监督管理总局、中国国家标准化管理委员会, Materials and Surface Analysis

GB/T 38114-2019 Nanotechnologies—Quantitative analysis of the surface oxygen functional groups on graphene materials—Chemical titration method
GB/T 40128-2021 Surface chemical analysis—Atomic force microscopy—Test method for thickness of the two-dimensional layered molybdenum disulfide nanosheets
GB/T 20671.6-2020 Classification system and test methods for nonmetallic gasket materials—Part 6: Standard test method for adhesion of gasket materials to metal surfaces
GB/T 31838.3-2019 Solid insulating materials—Dielectric and resistive properties—Part 3: Resistive properties (DC methods)—Surface resistance and surface resistivity
GB/T 38048.1-2020 Surface cleaning appliances—Part1: General requirements on test material and test equipment

Professional Standard - Electron, Materials and Surface Analysis

SJ/T 11743.4.4-2019 Piezoelectric and dielectric devices for frequency control and selection – Glossary – Part 4-4: Materials – Materials for surface acoustic wave (SAW) devices（IEC/TS 61994-4-4：2010，IDT）

PL-PKN, Materials and Surface Analysis

PN BN 6091-17-1964

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Materials and Surface Analysis

GB/T 20671.6-2006 Classification system and test methods for nonmetallic gasket materials-Part6:Standard test method for adhesion of gasket materials to metal surfaces
GB/T 43087-2023 Method for determining the interface position in cross-sectional images of layered materials using microbeam analysis and electron microscopy
GB/T 18570.3-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 3:Assessment of dust on steel surface prepared for painting (pressure-sensitive tape method)
GB/T 18570.5-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 5:Measurement of chloride on surfaces prepared for painting (ion detection tube method)
GB/T 8923.1-2011 Preparation of steel substrates before application of paints and related products.Visual assessment of surface cleanliness.Part 1:Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coa
GB/T 24176-2009 Metallic materials.Fatigue testing.Statistical planning and analysis of data
GB/T 8923.4-2013 Preparation of steel substrates before application of paints and related products.Visual assessment of surface cleanliness.Part 4:Initial surface conditions,preparation grades and flash rust grades in connection with high-pressure water jetting
GB/T 13288.5-2009 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 3:Method for the detdrmination of the surface profile.
GB/T 13288.2-2011 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 2:Method for the grading of surface profile of abrasive blast-cleaned steel.Comparator procedure
GB/T 13288.4-2013 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned substrates.Part 4:Method for the calibration of ISO surface profile comparator and for the determination of surface profil
GB/T 18570.2-2009 Preparation of steel substrates before application of paints and related products.Tests for the assesssment of surface cleanliness.Part 2:Laboratory determination of chloride on cleaned surfaces
GB/T 8923.2-2008 Preparation of steel substrates before application of paints and related products.Visual assessment of surface cleanliness.Part 2:Preparation grades of previously coated steel substrates after localized removal of previous coatings
GB/T 13288.1-2008 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned substrates.Part 1:Specification and definitions for ISO surface profile comparators for the assessment of abrasive blast-c
GB/T 13288.3-2009 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 3:Method for the calibration of ISO surface profile comparators and for the determination of surface
GB/T 8923.3-2009 Preparation of steel substrates before application of paints and related products.Visual assessment of surface cleanliness.Part 3:Preparation grades of welds,edges and other areas with surface imperfections
GB/T 18570.6-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 6:Extraction of soluble contaminants for analysis.The Bresle method
GB/T 18570.8-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 8:Field method for the refractometric determination of moisture
GB/T 18570.6-2011 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 6:Extraction of soluble contaminants for analysis.The Bresle method
GB/T 30702-2014 Surface chemical analysis.Auger electron spectroscopy and X-ray photoelectron spectroscopy.Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
GB/T 16886.19-2022 Biological evaluation of medical devices—Part 19: Physico-chemical, morphological and topographical characterization of materials
GB/T 16886.19-2011 Biological evaluation of medical devices.Part 19: Physico-chemical,morphological and topographical characterization of materials
GB/T 16656.45-2001 Industrial automation systems and integration Product data representation and exchange Part 45: Integrated generic resource: Materials
GB/T 19816.4-2005 Preparation of steel substrates before application of paints and related products.Test methods for metallic blast-cleaning abrasives.Part 4:Determination of apparent density
GB/T 18570.9-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 9:Field method for the conductometric determination of water-soluble salts
GB/T 9097.1-2002 Sintered metal materials,excluding hardmetals--Determination of apparent hardness Part 1: Materials of essentially uniform section hardness
GB/T 18570.10-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 10:Field method for the titrimetric determination of water-soluble chloride
GB/T 18570.12-2008 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 12:Field method for the titrimetric determination of water-soluble ferrous ions
GB/T 18570.11-2009 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 11:Field method for the turbidimetric determination of water-soluble sulfate
GB/T 18838.1-2002 Preparation of steel substrates before application of paints and related products--Specifications for metallic blast-cleaning abrasives--General introduction and classification
GB/T 17850.1-2002 Preparation of steel substrates before application of paints and related products--Specifications for non-metallic blast-cleaning abrasives--General introduction and classification
GB/T 19816.1-2005 Preparation of steel substrates before application of paints and related products.Test methods for metallic blast-cleaning abrasives.Part 1:Sampling

AENOR, Materials and Surface Analysis

UNE-EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007)
UNE-EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
UNE-EN ISO 19712-1:2013 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications (ISO 19712-1:2008)
UNE-EN 10342:2007 Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations
UNE-EN 13892-6:2003 Methods of test for screed materials - Part 6: Determination of surface hardness
UNE-EN ISO 13565-2:1998 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO CURVE (ISO 13565-2:1996).
UNE-EN ISO 13565-3:2001 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS). SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES. PART 3: HEIGHT CHARACTERIZATION USING THE MATERIAL PROBABILITY CURVE. (ISO 13565-3:1998)
UNE-EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced
UNE 11021-1:1992 SETTEES FOR PUBLIC AND DOMESTIC USE. SPECIFICATION FOR PERFORMANCE REQUIREMENTS. PART 1: MATERIALS AND SUPERFICIAL FINISHES.
UNE 11022-1:1992 TABLES FOR PUBLIC AND DOMESTIC USE. SPECIFICATION FOR PERFORMANCE REQUIREMENTS. PART 1: MATERIALS AND SUPERFICIAL FINISHES.
UNE-EN ISO 22975-3:2015 Solar energy - Collector components and materials - Part 3: Absorber surface durability (ISO 22975-3:2014)
UNE 55530:1992 SURFACE ACTIVE AGENTS. CHLOROISOCYANURIC ACIDS AND THEIR SALTS FOR USE AS RAW-MATERIAL IN DETERGENT FORMULATIONS. SAMPLING AND CHEMICAL ANALYSIS

Professional Standard - Commodity Inspection, Materials and Surface Analysis

SN/T 3316-2012 Quantitative chemical analysis about the mixtures of feather and down blended with chemical fibres

Japanese Industrial Standards Committee (JISC), Materials and Surface Analysis

JIS K 0143:2023 Surface chemical analysis -- Secondary-ion mass spectrometry -- Determination of boron atomic concentration in silicon using uniformly doped materials
JIS K 0143:2000 Surface chemical analysis -- Secondary ion mass spectrometry -- Determination of boron atomic concentration in silicon using uniformly doped materials
JIS K 0156:2018 Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth calibration for silicon using multiple delta-layer reference materials
JIS K 0160:2009 Surface chemical analysis -- Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy
JIS K 0167:2011 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
JIS K 6217-7:2008 Carbon black for rubber industry -- Fundamental characteristics -- Part 7: Rubber compounding ingredients -- Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
JIS C 2139-3-2:2018 Dielectric and resistive properties of solid insulating materials -- Part 3-2: Determination of resistive properties (DC methods) -- Surface resistance and surface resistivity
JIS B 0671-3:2002 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 3: Height characterization using the material probability curve

Professional Standard - Machinery, Materials and Surface Analysis

JB/T 8063.1-1996 Method for chemical analysis of powder metallurgy materials and products Determination of carbon in iron-based materials and products (gas volumetric method)
JB/T 8063.8-1996 Chemical analysis method of powder metallurgy materials and products Determination of iron in copper-based materials and products (EDTA—H2O2 photometry)
JB/T 8063.6-1996 Determination of lead in copper-based materials and products by chemical analysis method of powder metallurgy materials and products (electrolytic separation-EDTA titration method)
JB/T 8063.1-2011 Methods for chemical analysis of powder metallurgy materials and products.Part 1:The gas volumetric method for the determination of carbon in iron-based materials and products
JB/T 8063.3-1996 Method for chemical analysis of powder metallurgy materials and products Determination of molybdenum in iron-based materials and products (thiocyanate photometry)
JB/T 8063.6-2011 Methods for chemical analysis of powder metallurgy materials and products.Part 6:The electrolytic separation-EDTA titrimetric method for the determination of lead in copper-based materials and products
JB/T 8063.3-2011 Methods for chemicalanalysis of powder metallurgy materials and products.Part 3:The thiocyanate photometric method for the determination of molybdenum in iron-based materials and products
JB/T 8063.2-1996 Method for chemical analysis of powder metallurgy materials and products Determination of copper in iron-based materials and products (ammonium bifluoride masking-iodometric method)
JB/T 8063.2-2011 Methods for chemical analysis of powder metallurgy materials and products.Part 2：The ammonium hydrogen fluoride masking,iodometriy method for the determination of copper in iron-based materials and products
JB/T 8063.4-1996 Powder metallurgy materials and products chemical analysis method Determination of copper in copper-based materials and products (potassium iodide-sodium thiosulfate titration method)
JB/T 8063.7-1996 Powder Metallurgy Materials and Products Chemical Analysis Method Determination of Zinc in Copper-Based Materials and Products (Lead and Barium Sulfate Co-precipitation—EDTA Titration Method)
JB/T 8063.4-2011 Methods for chemical analysis of powder metallurgy materials and products.Part 4:The potassium iodide-sodium thiosulfate titrimetric method for the determination of copper in copper-based materials and products
JB/T 8063.5-2011 Methods for chemical analysis of powder metallurgy materials and products:Part 5:The secondary sodium phosphate reduction – potassium iodate titrimetric method for the determination of tin in copper-based materials and products
JB/T 8063.7-2011 Methods for chemical analysis of powder metallurgy materials and products.Part 7:The lead-barium sulfate precipitation-EDTA titrimetric method for the determination of zinc in copper-based materials and products
JB/T 8063.8-2011 Methods for chemical analysis of powder metallurgy materials and products.Part 8:The EDTA-HO photometric method for the determination of iron in copper-based materials and products
JB/T 8063.5-1996 Powder metallurgy materials and products chemical analysis method Determination of tin in copper-based materials and products (sodium hypophosphite reduction-potassium iodate titration method)

Lithuanian Standards Office , Materials and Surface Analysis

LST EN 1388-2-2000 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware
LST EN 10342-2005 Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations
LST EN ISO 13565-3:2001 Geometrical Product Specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve (ISO 13565-3:1998)
LST EN 13965-1-2005 Characterization of waste - Terminology - Part 1: Material related terms and definitions
LST EN 13892-6-2003 Methods of test for screed materials - Part 6: Determination of surface hardness
LST EN 1388-1-2000 Materials and articles in contact with foodstuffs - Silicate surfaces - Part 1: Determination of the release of lead and cadmium from ceramic ware
LST EN ISO 13565-2:2001 Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996)
LST EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced

Professional Standard - Medicine, Materials and Surface Analysis

YY/T 0652-2008 Wear of implant materials.Polymer and metal wear particles.Isolation,characterization and quantification

IT-UNI, Materials and Surface Analysis

RO-ASRO, Materials and Surface Analysis

SR ISO 4498-2:1996 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen

CEN - European Committee for Standardization, Materials and Surface Analysis

EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures
EN ISO 11124-2:2018 Preparation of Steel Substrates before Application of Paints and Related Products - Specifications for Metallic Blast-Cleaning Abrasives - Part 2: Chilled-Iron Grit
EN ISO 11124-4:2018 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot
EN ISO 19679:2017 Plastics - Determination of aerobic biodegradation of nonfloating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide

International Electrotechnical Commission (IEC), Materials and Surface Analysis

IEC 60404-1-1:2004 Magnetic materials - Part 1-1: Classification - Surface insulations of electrical steel sheet, strip and laminations
IEC 60404-11:2012 Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip
IEC 49/878/CD:2009 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4: Materials - Materials for Surface Acoustic Wave (SAW) devices
IEC 60404-11:1991 Magnetic materials; part 11: method of test for the determination of surface insulation resistance of magnetic sheet and strip
IEC 60404-11:2021 Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip
IEC 60404-11:1991+AMD1:1998+AMD2:2012 CSV Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip
IEC TS 61994-4-3:2008 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-3: Materials - Materials for dielectric devices
IEC TS 62885-1:2018 Surface cleaning appliances - Part 1: General requirements on test material and test equipment
IEC TS 62885-1:2016 Surface cleaning appliances - Part 1: General requirements on test material and test equipment
IEC TS 62885-1:2020 RLV Surface cleaning appliances - Part 1: General requirements on test material and test equipment
IEC TS 62885-1:2020 Surface cleaning appliances - Part 1: General requirements on test material and test equipment
IEC 62631-3-2:2015 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity
IEC TS 61994-4-4:2005 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4: Materials - Materials for Surface Acoustic Wave (SAW) devices
IEC 49/890/DTS:2009 IEC/TS 61994-4-4, Ed. 2: Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4: Materials - Materials for Surface Acoustic Wave (SAW) devices
IEC TS 61994-4-4:2010 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4: Materials - Materials for surface acoustic wave (SAW) devices
IEC 60404-11:1991/AMD1:1998 Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip; Amendment 1

(U.S.) Ford Automotive Standards, Materials and Surface Analysis

FORD WSS-M99P37-A-2014 PERFORMANCE,LAMINATED IN-COLOR FILM MATERIALS, CLASS "A" SURFACE, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M99P37-B-2014 PERFORMANCE,LAMINATED IN-COLOR FILM MATERIALS, CLASS "A" SURFACE, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2F208-A1-2012 FLEXIBLE COVERSTOCK, THERMOPLASTIC OLEFIN (TPO), POLYESTER KNITTED FABRIC BACKED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2F208-A1-2014 FLEXIBLE COVERSTOCK, THERMOPLASTIC OLEFIN (TPO), POLYESTER KNITTED FABRIC BACKED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M6J156-A-2012 PRIMER SURFACER, 2-COMPONENT, CHIP RESISTANT THERMOPLASTIC SUBSTRATES ***TO BE USED WITH FORD WSS-M99P1111-A***

DE-VDA, Materials and Surface Analysis

VDA 278-2011 Thermal desorption analysis of organic emissions for the characterization of non-metallic materials for automobiles

ACI - American Concrete Institute, Materials and Surface Analysis

ACI SP-306-2016 Analytical and Finite Element Concrete Material Models - Comparison of Blast Response Analysis of One Way Slabs with Experimental Data

Indonesia Standards, Materials and Surface Analysis

SNI 1739-2008 Testing methods for fire spread tests at the surface of building materials for fire protection in houses and buildings

European Committee for Electrotechnical Standardization（CENELEC）, Materials and Surface Analysis

EN 60404-11:2013 Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip
EN 62631-3-2:2016 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity

KR-KS, Materials and Surface Analysis

KS G ISO 8442-6-2020 Materials and articles in contact with foodstuffs —Cutlery and table holloware — Part 6: Lightly silver-plated table holloware protected by lacquer
KS B ISO 22975-3-2016 Solar energy ― Collector components and materials ― Part 3: Absorber surface durability
KS C IEC 60404-11-2017 Magnetic materials－Part 11：Methods of test for thedetermination of surface insulation resistance of magnetic sheet and strip
KS C IEC 62631-3-2-2017 Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity
KS M ISO 8503-5-2018 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determinat
KS P ISO 7206-2-2018 Implants for surgery — Partial and total hip joint prostheses — Part 2: Articulating surfaces made of metallic, ceramic and plastics materials

GM North America, Materials and Surface Analysis

GM GMN4709-2000 Test Method for Determining Material Abrasion Resistance when Used with the Passive Occupant Detection System-A Surface (PODS-A)

ZA-SANS, Materials and Surface Analysis

SANS 10177-8:2006 Fire testing of materials, components and elements used in buildings Part 8: Surface burning characteristics of building materials
SANS 10177-3:2005 Fire-testing of materials, components and elements used in buildings Part 3: Surface fire index of finishing materials
SANS 10177-4:2005 Fire testing of materials, components and elements used in buildings Part 4: Surface fire index of floor coverings
SANS 3892:2000 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods
SANS 10177-10:2007 Fire testing of materials, components and elements used in buildings Part 10: Surface burning characteristics of building materials using the inverted channel tunnel test
SANS 7203-2:2007 Fire extinguishing media - Foam concentrates Part 2: Specification for medium and high expansion foam concentrates for top application to water-immiscible liquids

IEC - International Electrotechnical Commission, Materials and Surface Analysis

TS 61994-4-4-2010 Piezoelectric and dielectric devices for frequency control and selection – Glossary – Part 4-4: Materials – Materials for surface acoustic wave (SAW) devices (Edition 2.0)
TS 62885-1-2016 Surface cleaning appliances – Part 1: General requirements on test material and test equipment (Edition 1.0)
TS 62885-1-2018 Surface cleaning appliances - Part 1: General requirements on test material and test equipment (Edition 2.0)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Materials and Surface Analysis

ASHRAE 4579-2002 Emission of VOCs from Materials Used in Buildings: Analytical and Sensory Aspects (RP-695)

Universal Oil Products Company (UOP), Materials and Surface Analysis

UOP 964-2011 Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption

HU-MSZT, Materials and Surface Analysis

SE-SIS, Materials and Surface Analysis

SIS SS-ISO 3892:1983 Conversion coatings on metallic ma- terials - Determination of coating m?ss per unit area - Gravimetric methods

国家质量监督检验检疫总局, Materials and Surface Analysis

SN/T 2822-2011 Determination of the interface temperature between plastic and food during the heating process of exported food contact materials, polymer materials, plastics and products in microwave ovens or traditional furnaces

CZ-CSN, Materials and Surface Analysis

CSN ISO 3892:1992 Corrosion protection. Conversion coatings on metallic materials. Determination of coating mass per unit area. Gravimetric methods

American National Standards Institute （ANSI), Materials and Surface Analysis

ANSI/ASTM D2275:2001 Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface (10.01)

Hebei Provincial Standard of the People's Republic of China, Materials and Surface Analysis

DB13/T 2768.4-2018 Graphene powder material detection method part 4: specific surface area, pore volume and pore diameter BET method

Professional Standard - Railway, Materials and Surface Analysis

TB/T 2879.3-1998 Coatings and coatings for railway rolling stock Part 3: Specifications for surface treatment of metal and non-metal materials

BE-NBN, Materials and Surface Analysis

NBN EN ISO 3892:1995 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods (ISO 3892:1980)

NZ-SNZ, Materials and Surface Analysis

AS/NZS 4586:2004 Slip Resistance of Classification of New Pedestrian Surface Materials (Supersedes AS/NZS 3661.1: 1993; Amendment 1: 02/14/2005)