ZH
RU
ES

Precision Repeatability Accuracy

Precision Repeatability Accuracy, Total:193 items.

In the international standard classification, Precision Repeatability Accuracy involves: Quality, Metrology and measurement in general, Machine tools, Industrial automation systems, Metalliferous minerals, Products of the chemical industry, Analytical chemistry, Welding, brazing and soldering, Manufacturing forming processes, Ceramics, Vocabularies, Test conditions and procedures in general, Medical sciences and health care facilities in general, Plastics, On-board equipment and instruments, Pumps, Rubber, Gears, Measurement of time, velocity, acceleration, angular velocity, Laboratory medicine, Iron and steel products, Ferrous metals, Components for aerospace construction, Insulating materials, Industrial furnaces, Non-destructive testing, Linear and angular measurements, Mechanical testing, Thermodynamics and temperature measurements.

British Standards Institution (BSI), Precision Repeatability Accuracy

BS ISO 5725-2:1995 Accuracy (trueness and precision) of measurement methods and results. Basic methods for the determination of repeatability and reproducibility of a standard measurement method
BS ISO 230-2:2014 Test code for machine tools. Determination of accuracy and repeatability of positioning of numerically controlled axes
BS ISO 230-2:2007 Test code for machine tools. Determination of accuracy and repeatability of positioning numerically controlled axes
BS ISO 230-2:2014+A1:2016 Test code for machine tools - Determination of accuracy and repeatability of positioning of numerically controlled axes
BS ISO 5725-3:1995 Accuracy (trueness and precision) of measurement methods and results. Intermediate measures of the precision of a standard measurement method
BS ISO 5725-2:2019 Accuracy (trueness and precision) of measurement methods and results - Basic method for the determination of repeatability and reproducibility of a standard measurement method
BS ISO 5725-6:1995 Accuracy (trueness and precision) of measurement methods and results - Use in practice of accuracy values
BS ISO 5725-1:1995 Accuracy (trueness and precision) of measurement methods and results. General principles and definitions
BS ISO 5725-3:2023 Accuracy (trueness and precision) of measurement methods and results. Intermediate precision and alternative designs for collaborative studies
BS ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results. Basic methods for the determination of repeatability and reproducibility of a standard measurement method
BS ISO 10791-4:1998 Test conditions for machining centres - Accuracy and repeatability of positioning of linear and rotary axes
BS ISO 10791-5:1998 Test conditions for machining centres - Accuracy and repeatability of positioning of work-holding pallets
BS ISO 5725-4:1995 Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of the trueness of a standard measurement method
BS ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results. Use in practice of accuracy values
19/30329300 DC BS ISO 5725-2. Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method
PD ISO/TR 21074:2016 Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel
BS ISO 5725-1:2023 Accuracy (trueness and precision) of measurement methods and results - General principles and definitions
PD ISO/TR 22971:2005 Accuracy (trueness and precision) of measurement methods and results. Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
BS EN ISO 18753:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pyknometer
BS EN ISO 18753:2017 Tracked Changes. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of absolute density of ceramic powders by pycnometer
BS EN 60216-4-2:2001 Guide for the determination of thermal endurance properties of electrical insulating materials. Electrical insulating materials. Thermal endurance properties. Precision ovens for use up to 300C

CZ-CSN, Precision Repeatability Accuracy

CSN 20 0300 Cast.31-1989 Measurement of geometrical accura-cy of machine tools. Methods of measurement of accuracy and repea-tability of positioning
CSN 20 0300 Cast.30-1987 Measurements of geometrical accuracy of machine tools.Methods of the measurement of the possition setting repeatability
CSN 44 1822-1989 Iron ores and manganese ores, agglomerates and pellets. Methods for determination of specific, apparent and bulk density
CSN 20 0300 Cast.17-1985 Measurements of geometrical aceuracy of machine toolsComplex test methods of straightness and perpendicularity of a working unit movement in rclation to plane or an axis

Professional Standard - Machinery, Precision Repeatability Accuracy

JB/T 8772.4-1998 Test conditions of precision machining centres.Part 4:Accuracy and repeatability
JB/T 8772.5-1998 Test conditions of precision machining centres.Part 5:Tests for accuracy and repeatability of positioning of work-holding pallets
JB/T 8771.4-1998 Test conditions of machining centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes
JB/T 8771.5-1998 Test conditions of machining centres.Part 5:Tests for accuracy and repeatability of positioning of work-holding pallets
JB/T 11776.1-2014 Heavy duty movable portal-type turning-milling machining centers.Part 1: Testing of the accuracy

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Precision Repeatability Accuracy

GB/T 20957.4-2007 Test conditions for precision machining centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes
GB/T 20957.5-2007 Test conditions of precision machining centres.Part 5:Tests for accuracy and repeatability of positioning of wrk-holding pallets
GB/T 18400.4-2010 Test conditions for machining centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes
GB/T 17421.2-2000 Test code for machine tools-Part 2:Determination of accuracy and repeatability of positioning numerically controlled axes
GB/T 17421.2-2023 General Rules for Machine Tool Inspection Part 2: Determination of Positioning Accuracy and Repetitive Positioning Accuracy of CNC Axis
GB/T 17421.2-2016 Test code for machine tools.Part 2: Determination of accuracy and repeatability positioning numerically controlled axes
GB/T 6379-1986 Precision of test methods--Determination of repeatability and reproducibility for a standard test method by interlaboratory tests
GB/T 18400.5-2001/ISO 107915:1998 Machining Center Inspection Conditions Part 5: Inspection of Positioning Accuracy and Repeated Positioning Accuracy of Workholding Pallets
GB/T 18400.5-2010 Test conditions for machining centres.Part 5:Accuracy and repeatability of positioning of work-holding pallets
GB/T 6379.2-2004 Accuracy(trueness and precision)of measurement methods and results-Part 2:Basic method for the determination of repeatability and reproducibility of a standard measurement method
GB/T 16462.4-2007 Test conditions for numerically controlled turning machines and turning centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes
GB/T 11792-1989 Precision of test methods--Check the acceptability of test results obtained under repeatability or reproducibility conditions and to determine final test result
GB/T 11026.5-2010 Electrical insulating materials.Thermal endurance properties.Part 5:Ageing ovens.Precision ovens for use up to 300℃

RU-GOST R, Precision Repeatability Accuracy

GOST 30240.5-1995 Barite concentrate. Method for determination of density
GOST R ISO 5725-2-2002 Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method
GOST ISO 13041-4-2016 The lathes with numerical control and CNC machining centers. Test conditions. Part 4.t Accuracy and repeatability of positioning of linear and rotary axes
GOST 14080-1978 Precision alloy strip with specified temperature coefficient of linear expansion. Specifications

Taiwan Provincial Standard of the People's Republic of China, Precision Repeatability Accuracy

CNS 6571-1980 Determination of the Density and Relative Density of Essential Oils
CNS 14636-2002 Determination of accuracy and repeatability of positioning of numerically controlled machine tools
CNS 15077-4-2007 Test conditions for machining centers - Part 4 : Accuracy and repeatability of positioning of linear and rotary axes
CNS 15077-5-2007 Test conditions for machining centers - Part 5 : Accuracy and repeatability of positioning of work-holding pallets

Group Standards of the People's Republic of China, Precision Repeatability Accuracy

T/CAMER 016-2022 Test of accuracy of positioning and repeatability of linear axes for vertical twin-spindle CNC lathe
T/CAMMT 40-2022 Digital turning-milling precision forming machine without pattern casting Accuracy test
T/CSTM 00961-2022 Chemical composition quantitative analytical methods - General rules for evaluation of accuracy　（trueness and precision）compliance
T/CEEIA 595-2022 Requirements and test methods for temperature adaptability of reducer for robot
T/CSTM 00277.1-2022 Evaluation of stability for analytical instruments Part 1: Evaluation based on the precision of standard method
T/CSTM 00277.2-2022 Evaluation of stability for analytical instruments Part 2: Evaluation based on the precision of intra-laboratory determination results

International Organization for Standardization (ISO), Precision Repeatability Accuracy

ISO 8206:1991 Acceptance tests for oxygen cutting machines; reproducible accuracy; operational characteristics
ISO 10791-4:1998 Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes
ISO 5725-3:1994 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method
ISO 10791-5:1998 Test conditions for machining centres - Part 5: Accuracy and repeatability of positioning of work-holding pallets
ISO 5725-3:1994/cor 1:2001 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method; Technical Corrigendum 1
ISO 5725:1981 Precision of test methods — Determination of repeatability and reproducibility by inter-laboratory tests
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 5725-2:2019 Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 230-2:1997/Cor 1:1999 Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes; Technical Corrigendum 1
ISO 230-2:2006 Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes (Fourth Edition)
ISO 230-2:2014 Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
ISO 5725-2:1994/cor 1:2002 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method; Technical Corrigendum 1
ISO 178:2001/Amd 1:2004 Plastics - Determination of flexural properties; Amendment 1: Precision statement
ISO 230-2:1988 Acceptance code for machine tools; part 2: determination of accuracy and repeatability of positioning of numerically controlled machine tools
ISO 5725-5:1998/cor 1:2005 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method; Technical Corrigendum 1
ISO 230-2:2014/Amd 1:2016 Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes; Amendment 1
ISO 2781:2008/Amd 1:2010 Rubber, vulcanized or thermoplastic - Determination of density - Amendment 1: Precision data
ISO 18753:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of absolute density of ceramic powders by pycnometer
ISO 13041-4:2004 Test conditions for numerically controlled turning machines and turning centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes
ISO 18753:2004 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pyknometer
ISO/TR 21074:2016 Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel

GOSTR, Precision Repeatability Accuracy

GOST ISO 10791-4-2017 Machining centres. Part 4. Accuracy and repeatability of positioning of linear and rotary axes
GOST ISO 230-2-2016 Test code for machine tools. Part2. Determination of accuracy and repeatability of positioning of numerically controlled axes

Danish Standards Foundation, Precision Repeatability Accuracy

DS/ISO 230-2:2007 Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes
DS/EN 28 206:1992 Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics
DS/ISO 8206:1992 Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics
DS/ISO 5725-2/Corr.1:2002 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
DS/ISO/TR 22971:2005 Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
DS/EN ISO 18753:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pyknometer
DS/ISO 5725-2:1995 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

Association Francaise de Normalisation, Precision Repeatability Accuracy

NF ISO 230-2:2014 Code d'essai des machines-outils - Partie 2 : détermination de l'exactitude et de la répétabilité de positionnement des axes à commande numérique
NF E60-100-2/A1*NF ISO 230-2/A1:2016 Test code for machine tools - Part 2 : determination of accuracy and repeatability of positioning of numerically controlled axes - Amendment 1
NF ISO 5725-2:2020 Exactitude (justesse et fidélité) des résultats et méthodes de mesure - Partie 2 : méthode de base pour la détermination de la répétabilité et de la reproductibilité d'une méthode de mesure normalisée
NF ISO 10791-5:1998 Conditions d'essai pour centres d'usinage - Partie 5 : précision et répétabilité de positionnement des palettes porte-pieces.
NF X06-041-2*NF ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2 : basic method for the determination of repeatability and reproducibility of a standard measurement method
NF E60-100-2*NF ISO 230-2:2014 Test code for machine tools - Part 2 : determination of accuracy and repeatability of positioning of numerically controlled axes
NF EN 28206:1992 Contrôle de réception des machines d'oxycoupage - Précision de reproduction - Caractéristiques de fonctionnement.
NF ISO 10791-4:1998 Conditions d'essai pour centres d'usinage - Partie 4 : précision et répétabilité de positionnement des axes linéaires et rotatifs.
NF E60-097:1998 Test code for machine tools. Part 2 : determination of accuracy and repeatability of positioning of numerically controlled axes.
NF ISO 230-2/A1:2016 Code d'essai des machines-outils - Partie 2 : détermination de l'exactitude et de la répétabilité de positionnement des axes à commande numérique - Amendement 1
NF T46-030/A1:2010 Rubber, vulcanized or thermoplastic - Determination of density - Amendment 1 : precision data.
NF ISO 13041-4:2004 Conditions d'essai des tours à commande numérique et des centres de tournage - Partie 4 : précision et répétabilité de positionnement des axes linéaires et rotatifs
NF E60-172-5*NF ISO 10791-5:1998 Test conditions of machining centres. Part 5 : accuracy and repeatability of positioning of work-holding pallets.
NF B42-007:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pyknometer.
NF B42-007*NF EN ISO 18753:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pycnometer
NF B43-203*NF EN ISO 17138:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of flexural strength

BR-ABNT, Precision Repeatability Accuracy

ABNT NBR 5992-2016 Fuel ethanol - Determination of the density and alcoholic content by hydrometer

Japanese Industrial Standards Committee (JISC), Precision Repeatability Accuracy

JIS B 6190-2:2008 Test code for machine tools -- Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes
JIS B 6190-2:2016 Test code for machine tools -- Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
JIS B 6192:1999 Test code for machine tools -- Determination of accuracy and repeatability of positioning numerically controlled axes
JIS R 1639-2:1999 Test methods of properties of fine ceramic granules Part 2: Bulk density
JIS B 6331-4:2006 Test conditions for numerically controlled turning machines and turning centres -- Part 4: Accuracy and repeatability of positioning of linear and rotary axes
JIS B 6336-4:2000 Test conditions for machining centers -- Part 4: Accuracy and repeatability of positioning of linear and rotary axes
JIS B 6336-5:2000 Test conditions for machining centers -- Part 5: Accuracy and repeatability of positioning of work-holding pallets

YU-JUS, Precision Repeatability Accuracy

JUS M.G0.101-1991 Acceptance code for machine tools. Determination of accuracy and repeatability of positioning of numerically controlled machine tools

Korean Agency for Technology and Standards (KATS), Precision Repeatability Accuracy

KS A ISO 5725-5-2012(2022) Accuracy(trueness and precision) of measurement methods and results－Part 5：Alternative methods for the determination of the precision of a standard measurement method
KS A ISO 5725-2-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 2：Basic method for the determination of repeatability and reproducibility of a standard measurement method
KS A ISO 5725-2:2021 Accuracy(trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
KS B ISO 13041-4:2010 Test conditions for numerically controlled turning machines and turning centres-Part 4:Accuracy and repeatability of positioning of linear and rotary axes
KS B ISO 13041-4:2014 Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS B ISO 230-2:2020 Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
KS A ISO TR 21074:2018 Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel
KS B ISO 230-2:2014 Test code for machine tools-Part 2 : Determination of accuracy and repeatability of positioning numerically controlled axes
KS B ISO 230-2:2015 Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
KS B ISO 230-2:2007 Test code for machine tools-Part 2 : Determination of accuracy and repeatability of positioning numerically controlled axes
KS B ISO 10791-5:2021 Test conditions for machining centres — Part 5: Accuracy and repeatability of positioning of work-holding pallets
KS B ISO 10791-5-2016(2021) Test conditions for machining centres — Part 5: Accuracy and repeatability of positioning of work-holding pallets
KS B ISO 5198:2003 Centrifugal, mixed flow and axial pumps-Code for hydraulic performance tests-Precision class
KS B ISO 10791-4-2016(2021) Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS B ISO 10791-4:2021 Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS A ISO 5725-3:2012 Accuracy(trueness and precision) of measurement methods and results－Part 3：lntermediate measures of the precision of a standard measurement method
KS B ISO 13041-4:2018 Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS Q ISO 22971-2012(2017) Accuracy (trueness and precision) of measurement methods and results－Practical guidance for the use of ISO 5725－2:1994 in designing, implementing and statistically analysing interlaboratory repeatabil
KS W ISO 14209:2004 Aerospace-Airframe ball bearings, single-row, rigid,precision, sealed, intermediate duty-Inch series
KS Q ISO 22971-2012(2022) Accuracy (trueness and precision) of measurement methods and results－Practical guidance for the use of ISO 5725－2:1994 in designing, implementing and statistically analysing interlaboratory repeatabil
KS L 1618-2-2008 Fine ceramics(advanced ceramics, advanced technical ceramics)-Test methods of properties of ceramic granules-Part 2:Bulk density
KS L 1618-2-2013 Fine ceramics(advanced ceramics, advanced technical ceramics)－Test methods of properties of ceramic granules－Part 2：Bulk density

Lithuanian Standards Office , Precision Repeatability Accuracy

LST EN 28206-2000 Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics (ISO 8206:1991)
LST ISO 5725-2+AC1:2006 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (identical ISO 5725-2:1994 including technical corrigendum ISO 5725:1994/
LST ISO 5725-3+AC1:2007 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method (identical ISO 5725-3:1994 including technical corrigendum ISO 5725-3:1994/Cor.1:2001)
LST EN ISO 18753:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pyknometer (ISO 18753:2004)

European Committee for Standardization (CEN), Precision Repeatability Accuracy

EN 28206:1992 Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics (ISO 8206:1991)

KR-KS, Precision Repeatability Accuracy

KS A ISO 5725-2-2021 Accuracy(trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
KS B ISO 230-2-2020 Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
KS A ISO TR 21074-2018 Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel
KS B ISO 10791-5-2016 Test conditions for machining centres — Part 5: Accuracy and repeatability of positioning of work-holding pallets
KS B ISO 10791-5-2021 Test conditions for machining centres — Part 5: Accuracy and repeatability of positioning of work-holding pallets
KS B ISO 10791-4-2016 Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS B ISO 10791-4-2021 Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS B ISO 13041-4-2018 Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS B ISO 13041-4-2022 Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
KS A ISO TR 21074-2018(2023) Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel

工业和信息化部, Precision Repeatability Accuracy

JC/T 2528-2019 Method for determination of absolute density of fine ceramic powder: Pycnometer method

German Institute for Standardization, Precision Repeatability Accuracy

DIN ISO 10791-4:2001 Machine tools - Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes (ISO 10791-4:1998)
DIN ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:2019); Text in German and English
DIN ISO 5725-5 Berichtigung 1:2006 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5:1998), Corrigenda to DIN ISO 5725-5:2002-11 (ISO 5725-5:1998/Cor. 1:2005
DIN ISO 5725-3:2003-02 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method (ISO 5725-3:1994 including Technical Corrigendum 1:2001)
DIN ISO 10791-4:2001-01 Machine tools - Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes (ISO 10791-4:1998)
DIN EN ISO 18753:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pyknometer (ISO 18753:2004); English version of DIN EN ISO 18753:2006
DIN EN ISO 18753:2018 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pycnometer (ISO 18753:2017)
DIN EN ISO 18753:2018-01 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pycnometer (ISO 18753:2017); German version EN ISO 18753:2017
DIN ISO 5725-2:2002 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994 including Technical Corrigendum 1:2002)

ZA-SANS, Precision Repeatability Accuracy

SANS 5725-2:2009 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

VN-TCVN, Precision Repeatability Accuracy

TCVN 6910-2-2001 Accuracy (trueness and precision) of measurement methods and results.Part 2: Basic methos for the determination of repeatability and reproducibility of a standard measurement method
TCVN 7011-2-2007 Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes
TCVN 7681-4-2007 Test conditions for numerically controlled turning machine and turning centres.Part 4: Accuracy and repeatability of positioning of linear and rotary axes

ES-UNE, Precision Repeatability Accuracy

UNE-ISO 230-2:2016 Test code for machine tools -- Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
UNE-ISO 13041-4:2022 Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
UNE-EN ISO 18753:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pycnometer (ISO 18753:2017) (Endorsed by Asociación Española de Normalización in November of 2017.)

Military Standard of the People's Republic of China-General Armament Department, Precision Repeatability Accuracy

GJB 1485-1992 Precision, accuracy and uncertainty of material physical property testing methods
GJB 10014-2021 Accuracy Test Method for Ballistic Missile Inertial Starlight Composite Guidance System

IT-UNI, Precision Repeatability Accuracy

UNI ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

AENOR, Precision Repeatability Accuracy

UNE 82009-2:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 2: BASIC METHOD FOR THE DETERMINATION OF REPEATABILITY AND REPRODUCIBILITY OF A STANDARD MEASUREMENT METHOD.
UNE 15331-4:2005 Test conditions for numerically controlled turning machines and turning centres -- Part 4: Accuracy and repeatability of positioning of linear and rotary axes
UNE 82009-3:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 3: INTERMEDIATE MEASURES OF THE PRECISION OF A STANDARD MEASUREMENT METHOD.
UNE 82009-5:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD.
UNE 82009-6:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 6: USE IN PRACTICE OF ACCURACY VALUES.
UNE 82009-1:1998 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 1: GENERAL PRINCIPLES AND DEFINITIONS.
UNE 15450-4:2000 Machine-tools. Test conditions for machining centres. Part 4: Accuracy and repeatability of positioning of linear and rotary axes.
UNE 82009-4:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 4: BASIC METHODS FOR THE DETERMINATION OF THE TRUENESS OF A STANDARD MEASUREMENT METHOD.

Professional Standard - Hygiene , Precision Repeatability Accuracy

WS/T 492-2016 Performance verification of precision and correctness of quantitative determination items in clinical laboratory
WS/T 492-2015 Performance verification of precision and correctness of quantitative determination items in clinical laboratory

Institute of Electrical and Electronics Engineers (IEEE), Precision Repeatability Accuracy

IEEE 836-2001 Recommended practice for precision centrifuge testing of linear accelerometers
IEEE Std 836-1991 IEEE Recommended Practice for Precision Centrifuge Testing of Linear Accelerometers
IEEE Std 836-2001 IEEE Recommended Practice for Precision Centrifuge Testing of Linear Accelerometers
IEEE 836-2009 Recommended practice for precision centrifuge testing of linear accelerometers
IEEE Std 836-2009 IEEE Recommended Practice for Precision Centrifuge Testing of Linear Accelerometers - Redline
IEEE Unapproved Draft Std P836/D17, Dec 2008 IEEE Draft Recommended Practice for Precision Centrifuge Testing of Linear Accelerometers

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Precision Repeatability Accuracy

IEEE 836-1991 Recommended Practice for Precision Centrifuge Testing of Linear Accelerometers

US-CFR-file, Precision Repeatability Accuracy

CFR 40-1065.305-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.305:Verifications for accuracy,repeatability, and noise.

American National Standards Institute （ANSI), Precision Repeatability Accuracy

ANSI/IEEE 836:2009 Recommended Practice for Precision Centrifuge Testing of Linear Accelerometers

国家药监局, Precision Repeatability Accuracy

YY/T 1789.1-2021 Methods for performance evaluation of in vitro diagnostic test systems Part 1: Precision
YY/T 1789.6-2023 In vitro diagnostic testing system performance evaluation methods Part 6: Precision, diagnostic sensitivity and specificity of qualitative reagents

American Society for Testing and Materials (ASTM), Precision Repeatability Accuracy

ASTM B114-07(2018) Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
ASTM E2251-11 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids

Association of German Mechanical Engineers, Precision Repeatability Accuracy

VDI/VDE 2617 Blatt 9-2009 Accuracy of coordinate measuring machines - Characteristics and their reverification - Acceptance and reverification tests for Articulated Arm Coordinate Measuring Machines