ZH
RU
ES

xrd test usually

xrd test usually, Total:498 items.

In the international standard classification, xrd test usually involves: Components and accessories for telecommunications equipment, Products of the textile industry, Farming and forestry, Pesticides and other agrochemicals, Equipment for petroleum and natural gas industries, Electrical wires and cables, Piezoelectric and dielectric devices, Medical equipment, Telecommunication systems, Protection against fire, Electrical engineering in general, Rubber, Environmental testing, Electrical and electronic testing, Electronic components in general, Valves, Tobacco, tobacco products and related equipment, Road vehicle systems, Mechanical testing, Radiocommunications, Protective equipment, Microbiology, Analytical chemistry, Road vehicles in general, Reinforced plastics, Construction materials, Mining and quarrying, Testing of metals, Services, Linear and angular measurements, Electrical equipment for working in special conditions, Optics and optical measurements, Protection of and in buildings, Organic chemicals, Information technology (IT) in general, Office machines, Industrial automation systems, Conducting materials, Furniture, Milk and milk products, Vocabularies, Photography, Soil quality. Pedology, Iron and steel products, Surface treatment and coating, Insulating fluids, Corrosion of metals, Special purpose vehicles, Cycles, Tea. Coffee. Cocoa, Non-destructive testing, Thermodynamics and temperature measurements, Optical equipment, Animal feeding stuffs, Insulating materials, Interface and interconnection equipment, Magnetic materials, Audio, video and audiovisual engineering, Adhesives, Coatings and related processes used in aerospace industry, Air quality, Cereals, pulses and derived products, Graphic technology, Measurement of fluid flow, Acoustics and acoustic measurements, Paint ingredients, Aerospace electric equipment and systems, Printed circuits and boards, Water quality, Paper and board, Telecommunications in general, Electrical accessories, Materials for aerospace construction, Plastics, Refractories, Fasteners, Languages used in information technology, Electromechanical components for electronic and telecommunications equipment, Inks. Printing inks, Electricity. Magnetism. Electrical and magnetic measurements, Footwear, Radiation measurements, Nuclear energy engineering, Powder metallurgy, Character sets and information coding, Ceramics.

FI-SFS, xrd test usually

International Telecommunication Union (ITU), xrd test usually

ITU-T Q.134-1989 Routine Testing of Equipment (Local Maintenance) - Specifications of Signalling Systems Nos. 4 and 5 (Study Group XI) 2 pp
ITU-T J.190-2007 Architecture of MediaHomeNet (Study Group 9)
ITU-T J.19-1988 A CONVENTIONAL TEST SIGNAL SIMULATING SOUND - PROGRAMME SIGNALS FOR MEASURING INTERFERENCE IN OTHER CHANNELS
ITU-T Q.328-1989 Routine Testing of Equipment (Local Maintenance) - Specifications of Signalling Systems R1 and R2 (Study Group XI) 2 pp
ITU-T Q.162-1989 Routing Testing of Equipment (Local Maintenance) - Specifications of Signalling Systems Nos. 4 and 5 (Study Group XI) 2 pp
ITU-T J.65-1989 Standard Test Signal for Conventional Loading of a Television Channel - Line Transmission of Non-Telephone Signals - Transmission of Sound-Programme and Television Signals (Study Group XV) 1 pp
ITU-R 570-1978 (WITHDRAWN) Standard Test Signal for Conventional Loading of a Television Channel - Section CMTT B - Methods of Operation and Assessment of Performance of Television Transmissions
ITU-T SERIES X SUPP 18-2013 ITU-T X.1205 – Supplement on guidelines for abnormal traffic detection and control on IP-based telecommunication networks (Study Group 17)
ITU-T J.19 FRENCH-1988 A CONVENTIONAL TEST SIGNAL SIMULATING SOUND - PROGRAMME SIGNALS FOR MEASURING INTERFERENCE IN OTHER CHANNELS
ITU-T J.19 SPANISH-1988 A CONVENTIONAL TEST SIGNAL SIMULATING SOUND - PROGRAMME SIGNALS FOR MEASURING INTERFERENCE IN OTHER CHANNELS

British Standards Institution (BSI), xrd test usually

BS IEC 61196-1-123:2023 Coaxial communication cables - Electrical test methods. Test for attenuation constant of radiating cable
PD CEN/TR 17538:2020 Furniture. Common test equipment. Test foams and mattresses
17/30342962 DC BS IEC 61196-1-113. Coaxial communication cables. Part 1-113. Electrical test methods. Test for attenuation constant
BS IEC 61196-1-125:2022 Coaxial communication cable - Electrical test methods. Test for equivalent permittivity and equivalent dissipation factor of dielectric
BS EN 61223-3-4:2000 Evaluation and routine testing in medical imaging departments. Acceptance tests
21/30435547 DC BS IEC 61196-1-123. Coaxial Communication Cables. Part 1-123. Electrical test methods. Test for attenuation constant of radiating cable
BS EN 60534-4:2006 Industrial-process control valves - Inspection and routine testing
BS EN 61000-4-39:2017 Electromagnetic compatibilty (EMC). Testing and measurement techniques. Radiated fields in close proximity. Immunity test
PD IEC/TR 61948-1:2016 Nuclear medicine instrumentation. Routine tests. Gamma radiation counting system
BS ISO 20902-1:2018 Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries - General requirements
21/30435996 DC BS IEC 61196-1-125. Coaxial communication cable. Part 1-125. Electrical test methods. Test for equivalent permittivity and equivalent dissipation loss of dielectric
BS EN 12350-1:2019 Tracked Changes. Testing fresh concrete. Sampling and common apparatus
BS EN 61223-2-4:1995 Evaluation and routine testing in medical imaging departments. Constancy tests. Method for hard copy cameras
BS 7725-2.1:1994 Evaluation and routine testing in medical imaging departments. Constancy tests. Method for film processors
22/30453554 DC BS ISO 8437-1 AMD1. Snow throwers. Safety requirements and test procedures - Part 1. Terminology and common tests
BS EN 61223-2-5:1995 Evaluation and routine testing in medical imaging departments. Constancy tests. Method for image display devices
16/30303351 DC BS EN ISO 8437-1. Snow throwers. Safety requirements and test procedures. Part 1. Terminology and common tests
BS EN 60695-10-3:2016 Tracked Changes. Fire hazard testing. Abnormal heat. Mould stress relief distortion test
BS EN ISO 4210-3:2023 Tracked Changes. Cycles. Safety requirements for bicycles. Common test methods
21/30436461 DC BS EN 4862. Rotorcraft. Constant Wear Lifejackets. Requirements, testing and marking
BS 7725-2.3:1994 Evaluation and routine testing in medical imaging departments. Constancy tests. Method for darkroom safelight conditions
BS 5752-2:1984 Methods of test for coffee and coffee products. Green coffee: determination of moisture content (routine method)
23/30405158 DC BS ISO 24489. Non-destructive testing. Acoustic emission testing. Detection of corrosion at atmospheric and low-pressure metallic storage tank floors
BS ISO 11775:2015 Surface chemical analysis. Scanning-probe microscopy. Determination of cantilever normal spring constants
PD IEC TR 61948-4:2019 Tracked Changes. Nuclear medicine instrumentation. Routine tests. Radionuclide calibrators
BS EN 302-7:2004 Adhesives for load-bearing timber structures - Test methods - Determination of the conventional working life
BS EN 302-6:2004 Adhesives for load-bearing timber structures - Test methods - Determination of the conventional pressing time
PD IEC/TR 61948-3:2018 Tracked Changes. Nuclear medicine instrumentation. Routine tests. Positron emission tomographs
BS ISO 7210:2018 Tracked Changes. Routine analytical cigarette-smoking machine. Additional test methods for machine verification
BS EN 50399:2022 Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results
20/30406811 DC BS EN 50399. Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results
DD ENV 302-5-2002 Adhesives for load-bearing timber structures. Test tethods. Determination of the conventional assembly time
PD ISO/TR 4277:2009 Cryolite, natural and artificial. Conventional test for evaluation of free fluorides content
BS EN 16416:2013 Geosynthetic clay barriers. Determination of water flux index. Flexible wall permeameter method at constant head
BS EN 50514:2008 Audio, video and information technology equipment - Routine electrical safety testing in production
BS EN 50514:2009 Audio, video and information technology equipment. Routine electrical safety testing in production
BS 7663:1993 Methods of test for determination of permittivity and dissipation factor of electrical insulating material in sheet or tubular form
BS EN 50514:2014 Audio, video and information technology equipment. Routine electrical safety testing in production
BS EN 62911:2016 Audio, video and information technology equipment. Routine electrical safety testing in production
21/30393381 DC BS EN ISO 4210-3. Cycles. Safety requirements for bicycles. Part 3. Common test methods
BS IEC 61196-1-326:2022 Coaxial communication cables - Mechanical test methods. Hanger test
BS EN 61223-3-3:1997 Evaluation and routine testing in medical imaging departments. Acceptance tests. Imaging performance of X-ray equipment for digital subtraction angiograp hy
20/30397190 DC BS IEC 61223-3-8. Evaluation and routine testing in medical imaging departments. Acceptance and constancy tests - Radiography and radioscopy
BS EN 438-2:2016+A1:2018 High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Determination of properties
BS 5417:1976 Testing of general purpose industrial valves
BS EN 14175-4:2004(2014) Fume cupboards. On-site test methods
BS EN IEC 61223-3-5:2019 Evaluation and routine testing in medical imaging departments - Acceptance and constancy tests. Imaging performance of computed tomography X-ray equipment

YU-JUS, xrd test usually

JUS M.C5.093-1987 Control valves. Routine test
JUS M.E2.204-1994 Boiler plants - General requirements for testing
JUS N.M1.003-1984 Householdelectricalappliances. Safety requirements. Routine feste
JUS N.S5.601-1990 Testing of single channeJ and maltichannel electrocardiographs
JUS N.C0.030-1980 Testing offlacible cords and cables. General testing conditions

国家市场监督管理总局、中国国家标准化管理委员会, xrd test usually

GB/T 36655-2018 Test method for alpha crystalline silicon dioxide content of spherical silica powder for electronic packaging—XRD method

Military Standard of the People's Republic of China-General Armament Department, xrd test usually

GJB 4047-2000 General specifications for ballistic missile conventional warhead assembly testing and launch test equipment
GJB 4025-2000 Conventional weapons remote testing test procedures
GJB 7222-2011 Meterological element test procedures for conventional weapon examination
GJB 8327-2015 Conventional weapon test ballistic end point coordinate test method
GJB 6758-2009 Test method of pressure measurement in conventional hypersonic wind tunnel
GJB 9019-2017 Test methods for harmful gases in conventional weapons bays
GJB 38.62-1988 Conventional Power Submarine Mooring and Navigation Test Procedures Communication Sonar
GJB 38.26-1987 Conventional power submarine mooring and navigation test procedures ventilation system
GJB 349.28-1990 Conventional weapon finalization test method muzzle shock wave overpressure test
GJB 38.40-1987 Conventional powered submarine mooring and navigation test procedures Inboard communication system
GJB 8680-2015 Calibration procedures for dielectric constant tester for solid explosives
GJB 7057-2010 Tracking-telemetry information record requirements and format for conventional weapon test
GJB 38.29-1987 Conventional Power Submarine Mooring and Navigation Test Procedures Wind Measurement Instrument
GJB 9021-2017 Optical measurement method of attitude of conventional weapons test flying body
GJB 38.10B-2020 Conventional submarine mooring and navigation test procedures Part 10: Self-noise test
GJB 38.68-1988 Conventional submarine mooring and navigation test procedures Noise ranging sonar
GJB 349.8-1987 Conventional weapons finalization test methods observation instruments and sights
GJB 38.66-1988 Conventional powered submarine mooring and navigation test procedures for echo ice detectors
GJB 38.9-1986 Conventional Power Submarine Mooring and Navigation Test Procedures for Echo Sounders
GJB 38.11B-2020 Conventional Submarine Mooring and Navigation Test Procedures Part 11: Cabin Air Noise Test
GJB 349.43-1990 Conventional weapons finalization test method Anti-tank missile system goniometer
GJB 2707-1996 Communication satellite communication system testing methods
GJB 5539-2006 Calibration and test general requirements for aviation test equipment
GJB 5540-2006 General specification for test program sets of aviation automatic test system

ITE - Institute of Transportation Engineers, xrd test usually

LP-397-1995 Making Traffic Signs Work-An Overview of Design and Testing Procedures

GM North America, xrd test usually

GM GM9084P-1989 Test for Prevailing Torque Nuts

International Electrotechnical Commission (IEC), xrd test usually

IEC 61196-1-125:2022
Coaxial communication cable - Part 1-125: Electrical test methods - Test for equivalent permittivity and equivalent dissipation factor of dielectric
IEC 61196-1-123:2023 Coaxial communication cables - Part 1-123: Electrical test methods - Test for attenuation constant of radiating cable
IEC 60695-10-2:2014 Fire hazard testing - Part 10-2: Abnormal heat; Ball pressure test
IEC 61196-1-113:2018 Coaxial communication cables - Part 1-113: Electrical test methods - Test for attenuation constant
IEC 61196-1-113:2009 Coaxial communication cables - Part 1-113: Electrical test methods - Test for attenuation constant
IEC 61196-1-111:2005 Coaxial communication cables - Part 1-111: Electrical test methods - Test for stability of phase constant
IEC 61453:2007 Nuclear instrumentation - Scintillation gamma ray detector systems for the assay of radionuclides - Calibration and routine tests

American Society for Testing and Materials (ASTM), xrd test usually

ASTM D4491-99a Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D4491-99a(2004)e1 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D4491-99a(2004) Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D4491-99a(2009) Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D4491/D4491M-20e1 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D4491/D4491M-20 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D4491/D4491M-21 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D4491/D4491M-17 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM E408-71(1996)e1 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM E408-71(2002) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM D6505-00(2022) Standard Test Method for Assay of normal-Propyl Bromide Content
ASTM E408-13(2019) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM E408-71(2008) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM E408-13 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM B114-90(2001) Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
ASTM B114-90(1995)e1 Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
ASTM D7786-12 Standard Test Method for Determining Enamel Holdout
ASTM G149-97 Standard Practice for Conducting the Washer Test for Atmospheric Galvanic Corrosion
ASTM D7786-13 Standard Test Method for Determining Enamel Holdout
ASTM D3380-90(1995)e1 Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
ASTM D8153-22 Standard Test Method for Determination of Soil Water Contents Using a Dielectric Permittivity Probe
ASTM D4491/D4491M-22 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D4491/D4491M-16 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM E2611-19 Standard Test Method for Measurement of Normal Incidence Sound Transmission of Acoustical Materials Based on the Transfer Matrix Method
ASTM D1531-01 Standard Test Methods for Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures
ASTM D1531-01e1 Standard Test Methods for Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures
ASTM D1531-95 Standard Test Methods for Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures
ASTM D5859-96 Standard Test Method for Determining the Traction of Footwear on Painted Surfaces Using the Variable Incidence Tester
ASTM E2611-17 Standard Test Method for Normal Incidence Determination of Porous Material Acoustical Properties Based on the Transfer Matrix Method

Professional Standard - Agriculture, xrd test usually

NY/T 1427-2016 Guidelines for storage stability testing of pesticides at ambient temperature
NY/T 1427-2007 Guidelines for Testing Stability of Pesticides at Ambient Temprature

Professional Standard - Petroleum, xrd test usually

SY/T 5483-2005 Technology procedure for conventional drill stem testing
SY/T 5483-1997 Technology criteria for conventional drill stem testing
SY/T 5486-1999 Technology procedure for non-conventional drill stem testing
SY/T 5486-2010 Technical regulation for non-conventional drill stem testing
SY 5486-2010 Technical Regulations for Unconventional Formation Testing
SY/T 5869-1993 Routine test of downhole pressure of self-flowing well

国家能源局, xrd test usually

SY/T 5483-2017 Technical regulations for routine formation testing

PT-IPQ, xrd test usually

NP ISO 3383:1999 Rubber General directions for achieving elevated or subnormal temperaturas for test purposes
NP 4102-1991 Textiles Textile floor coverings. Burning behaviour. Tablet test at ambient temperature
NP 988-2000 Cereais Détermination of bulk density, called "mass per hectolitre" Routine method
NP EN 1518-2000 Non-destructive testing Leak testing Characterization of mass spectrometer leak detectors

Association Francaise de Normalisation, xrd test usually

XP P94-060-1:1997 Sols : reconnaissance et essais - Essai de dessiccation - Partie 1 : détermination conventionnelle de la limite de retrait sur le passant à 400 micromètres d'un matériau.
NF S31-303*NF EN 1793-3:1997 Road traffic noise reducing devices. Test method for determining the acoustic performance. Part 3 : normalized traffic noise spectrum.
NF EN 60695-10-3:2016 Essais relatifs aux risques du feu - Partie 10-3 : chaleur anormale - Essai de déformation par réduction des contraintes de moulage
NF EN ISO 8437-1:2021 Chasse-neige - Exigences de sécurité et essais - Partie 1 : terminologie et essais communs
NF EN 60695-10-2:2014 Essais relatifs aux risques du feu - Partie 10-2 : chaleurs anormales - Essai à la bille
UTE C27-251U*UTE C27-251:1987 Liquid dielectrics. Conventional assessment of smoke corrosiveness by measurements of ph-value and resistivity. Test method.
NF D30-001:1984 Hot water boilers for central heatings. Conventional efficiency. Measurement of boiler characteristics.
NF EN 62670-1:2014 Concentrateurs photovoltaïques (CPV) - Essai de performance - Partie 1 : conditions normales
NF C27-251:1987 Liquid dielectrics Conventional assessment of smoke corrosiveness by measurements of pH-value and resistivity Test method
NF C77-230:2007 Information technology equipment - Routine electrical safety testing in production.
NF C20-453:1985 Basic environmental testing procedures. Test methods. Conventional determination of corrosiveness of smoke.
NF EN 61223-2-4:1994 Essais d'évaluation et de routine dans les services d'imagerie médicale - Partie 2-4 : essais de constance - Reprographes
NF V37-022*NF ISO 7210:2019 Routine analytical cigarette-smoking machine - Additional test methods for machine verification
NF D14-507:2021 Appareils sanitaires - Résistance des surfaces émaillées aux alcalins à chaud - Méthode d'essai conventionnel
NF ISO 7210:2019 Machine à fumer analytique de routine pour cigarettes - Méthodes d'essais complémentaires pour la vérification de la machine
NF EN 61223-2-5:1994 Essais d'évaluation et de routine dans les services d'imagerie médicale - Partie 2-5 : essais de constance - Dispositifs de visualisation des images
NF EN 60811-301:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 301 : essais électriques - Mesure de la permittivité à 23 oC des matières de remplissage
NF EN 60689:2014 Méthodes de mesure et d'essai concernant le réglage des résonateurs à quartz dans la plage comprise entre 10 kHz et 200 kHz et valeurs normales
NF EN ISO 2231:1995 Supports textiles revêtus de caoutchouc ou de plastique - Atmosphères normales de conditionnement et d'essai
NF EN 12222:1998 Chaussures - Atmosphères normales de conditionnement et d'essai des chaussures et de leurs éléments constitutifs
NF EN ISO 9142:2004 Adhésifs - Guide pour la sélection de conditions normales d'essai de vieillissement en laboratoire des assemblages collés
NF EN 14225-4:2005 Vêtements de plongée - Partie 4 : vêtements de plongée à pression atmosphérique - Exigences relatives aux facteurs humains et méthodes d'essai
NF G38-165*NF EN 16416:2013 Geosynthetic clay barriers - Determination of water flux index - Flexible wall permeameter method at constant head
NF E25-035-2/A1:2021 Bolted joints - Part 2 : prevailing torque stainless steel nuts - Functional properties, test methods for torque/clamp force and prevailing torques and proof load
NF E25-035-2:2020 Bolted joints - Part 2 : prevailing torque stainless steel nuts - Functional properties, test methods for torque/clamp force and prevailing torques and proof load
NF EN 61223-3-4:2005 Essais d'évaluation et de routine dans les services d'imagerie médicale - Partie 3-4 : essais d'acceptation - Performance d'imagerie des appareils de radiographie dentaire
NF T76-152-7*NF EN 302-7:2013 Adhesives for load-bearing timber structures - Test methods - Part 7 : determination of the working life under referenced conditions
NF T46-043:1983 Vulcanized rubber. Determination of compression stress relaxation at normal and elevated temperatures (annular test-pieces).
FD X07-022:2004 Métrologie et applications de la statistique - Utilisation des incertitudes de mesures : présentation de quelques cas et pratiques usuelles

Professional Standard - Aerospace, xrd test usually

QJ 2706A-2004 General technical requirement of general assembly,test and acceptance for conventional warhead of ballistic missile
QJ 2220.4-1994 Test method for coating electrical insulation performance Test method for relative dielectric constant at power frequency, audio frequency and high frequency

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, xrd test usually

GB/T 5441.7-1985 Test methods for communication cable--Attenuation coefficient test--Open and short circuit method
GB/T 12634-1990 Test methods for electroelastic constants of piezoelectric crystals
GB/T 7609-1995 General test method for transmission performance of PCM voice channel in telecommunication network
GB/T 9868-1988 Rubber--General directions for achieving elevated or subnormal temperatures for test purposes
GB/T 11297.11-2015 Test method for dielectric constant of pyroelectric materials
GB/T 24618-2009 Routine analytical cigarette-smoking machine.Additional test methods
GB/T 5441.8-1985 Test methods for communication cable--Test for frequency characteristic of attenuation coefficient of coaxial pair--Comparison method
GB/T 32376-2015 Elastic constants test method for fibre reinforced composites
GB/T 30654-2014 Test method for lattice constant of Ⅲ-nitride epitaxial layers
GB/T 5597-1999 Test method for complex permittivity of solid dielectric materials at microwave frequencies
GB/T 3389.2-1999 Test methods for the properties of piezoelectric ceramics. Static test for piezoelectric strain constant d33
GB/T 12636-1990 Stripline test method for complex permittivity of microwave dielectric substrates
GB/T 11309-1989 Test methods for the properties of piezoelectric ceramics--Quasi-static test for piezoelectric strain constant d33
GB/T 11310-1989 Test methods for the properties of piezoelectric ceramics--Test methods for temperature characteristics of relative free dielectric constants
GB 11309-1989 Piezoelectric ceramic material performance test method quasi-static test of longitudinal piezoelectric strain constant d33
GB 11310-1989 Piezoelectric Ceramic Material Performance Test Method Relative Free Permittivity Temperature Characteristics Test
GB 7265.1-87 Test method for complex permittivity of solid dielectric materials at microwave frequencies--Perturbation method
GB/T 7265.1-1987 Test method for complex permittivity of solid dielectric materials at microwave frequencies--Perturbation method
GB 7265.1-1987 Test Method for Microwave Complex Permittivity of Solid Dielectric Perturbation Method
GB/T 7265.2-1987 Test method for the complex permittivity of solid dielectric materials at microwave frequencies--
GB 7265.2-1987 Test method of microwave complex permittivity of solid dielectric "open cavity" method
GB/T 9789-2008 Metallic and other non-organic coatings.Sulfur dioxide test with general condensation of moisture
GB/T 9789-1988 Metallic and other non-organic coatings--Sulfur dioxide test with general condensation of moisture
GB/T 12452-2022 General principles of water balance test
GB/T 17148-1997 A conventional test slgnal simulating sound--Programme signals for measuring interference in other channels
GB/T 28519-2012 General principles of energy consumption test methods for telecommunication equipment
GB/T 12452-2008 The general principles of water balance test in enterprises
GB/T 28030-2011 Earth continuity tester

German Institute for Standardization, xrd test usually

DIN 51632-1:2001-12 Test spirit - Part 1: White spirit regular; Requirements and testing
DIN EN ISO 8437-1:2016-07 Snow throwers - Safety requirements and test procedures - Part 1: Terminology and common tests (ISO/DIS 8437-1:2016); German and English version prEN ISO 8437-1:2016 / Note: Date of issue 2016-06-10
DIN EN 61223-2-5:2004-09 Evaluation and routine testing in medical imaging departments - Part 2-5: Constancy tests; Image display devices (IEC 61223-2-5:1994); German version EN 61223-2-5:1994
DIN EN 61223-2-4:2003-10 Evaluation and routine testing in medical imaging departments - Part 2-4: Constancy tests; Hard copy cameras (IEC 61223-2-4:1994); German version EN 61223-2-4:1994
DIN EN 50116:2007 Information technology equipement - Routine electrical safety testing in production; German version EN 50116:2006
DIN 10463:1990 Determination of non-fat solids content of butter; routine method
DIN EN 12350-1:2019 Testing fresh concrete - Part 1: Sampling and common apparatus
DIN EN 60534-4:2007 Industrial-process control valves - Part 4: Inspection and routine testing (IEC 60534-4:2006); German version EN 60534-4:2006
DIN EN 12350-1:2019-09 Testing fresh concrete - Part 1: Sampling and common apparatus; German version EN 12350-1:2019
DIN ISO 7210:2020-06 Routine analytical cigarette-smoking machine - Additional test methods for machine verification (ISO 7210:2018)
DIN EN ISO 8437-1:2023-11 Snow throwers - Safety requirements and test procedures - Part 1: Terminology and common tests (ISO 8437-1:2019); German version EN ISO 8437-1:2021
DIN 6858-2:2020-12 Quality control of multi-modal imaging - Part 2: Routine test SPECT/CT
DIN 6858-1:2014-10 Quality control of multi-modal imaging - Part 1: Routine test PET/CT
DIN EN 4862:2021 Rotorcraft - Constant Wear Lifejackets - Requirements, testing and marking; English version prEN 4862:2021
DIN 53160:2023-07 Determination of the colour resilience of articles for common use - Test with saliva and perspiration simulants
DIN EN 50514:2009 Audio, video and information technology equipment - Routine electrical safety testing in production; German version EN 50514:2008
DIN ISO 7210:2020 Routine analytical cigarette-smoking machine - Additional test methods for machine verification (ISO 7210:2018)
DIN EN 4862:2022-08 Aerospace series - Rotorcraft constant wear lifejackets - Requirements, testing and marking; German and English version FprEN 4862:2022 / Note: Date of issue 2022-07-22
DIN EN 17899:2022-10 Water quality - Spectrophotometric determination of chlorophyll-a content by ethanol extraction for the routine monitoring of water quality; German and English version prEN 17899:2022 / Note: Date of issue 2022-09-09
DIN 51460-3:2016-12 Testing of petroleum products - Method for sample preparation - Part 3: Unpressurized digestion with mineral acids
DIN 50315:2010-05 Testing of metallic abrasives by centrifugal blasting - Wear testing, efficiency testing
DIN 53295:1982-02 Testing of sandwiches; Peel test by means of a drum
DIN EN 61223-3-2:2010-01 Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests - Imaging performance of mammographic X-ray equipment (IEC 61223-3-2:2007); German version EN 61223-3-2:2008
DIN 10182-2:1982 Microbiological analysis of milk; detection of inhibitors in milk; routine method (brilliant black reduction test)
DIN EN IEC 61223-3-5:2021-11 Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests and constancy tests - Imaging performance of computed tomography X-ray equipment (IEC 61223-3-5:2019); German version EN IEC 61223-3-5:2019

RO-ASRO, xrd test usually

STAS 12030/8-1986 General use machinetools for metals cutting Test pieces for accuracy checking up CHECKING Up METHODS OF DIMENSIONS CONSTANT OF CYLINDRICAL PIECES
STAS R 12007/6-1989 Equipments reliability testing TESTS FOR THE VALIDrTY OF A CONSTANT FAILURE RATE ASSUMPTION
STAS R 12007/3.2-1989 Equipment reliability testing PREFERRED TEST CONDITIONS Equipment for stationary use in weatherprotected locations
STAS 10135/3-1986 Hydraulic power NORMALLY CLOSED PILOT- OPERATED PRESSURE CONTROL VALVES pn 200 bar Types and basic dimensions
STAS 186-1986 Tecbnical dravrings LETTERTNG
STAS 185/6-1989 Sanitary, central heating, ventilation and natural gas installations MEASURING AND CONTROL APPARATUS Conven?ional signs
STAS SR ISO 2285:1995 Vulcanized or thermoplastic rubber — Determination of tension set at normal and high temperatures
STAS 10275/1-1982 PLASTER General specifications for tests carrying out, preparation of normal consistancy paste and determination of white degree
STAS 6669/1-1986 HIGH VOLTAGE TESTS General specifications
STAS 6669/3-1986 HIGH-VOLTAGE TESTS Measuring devices General specifications
STAS 6299/6-1977 GENERAL PURPOSE LARGE CONTAINERS Test methodes

Danish Standards Foundation, xrd test usually

DS/EN 60695-10-2/Corr. 1:2007 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test
DS/EN 60695-10-2:2004 Fire hazard testing Part 10-2: Abnormal heat - Ball pressure test
DS/ISO 3383:1987 Rubber. General directions for achieving elevated or subnormal temperatures for test purposes
DS/EN 13755:2008 Natural stone test methods - Determination of water absorption at atmospheric pressure
DS/EN 60695-10-3:2002 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
DS/ISO 7210:2013 Routine analytical cigarette-smoking machine - Additional test methods for machine verification
DS/IEC/TR 61948-1:2003 Nuclear medicine instrumentation - Routine tests - Part 1: Radiation counting systems
DS/EN 61223-2-4:2013 Evaluation and routine testing in medical imaging departments - Part 2-4: Constancy tests - Hard copy cameras
DS/EN 61223-2-5:2013 Evaluation and routine testing in medical imaging departments - Part 2-5: Constancy tests - Image display devices
DS/EN ISO 6988:1995 Metallic and other non organic coatings - Sulfur dioxide test with general condensation of moisture
DS/IEC/TR 61948-3:2006 Nuclear medicine instrumentation - Routine tests - Part 3: Positron emission tomographs
DS/CEN/TS 14754-1:2007 Curing compounds - Test methods - Part 1: Determination of water retention efficiency of common curing compounds
DS/EN 61223-3-4:2001 Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance tests - Imaging performance of dental X-ray equipment
DS/EN 61223-3-2:2008 Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests - Imaging performance of mammographic X-ray equipment

CENELEC - European Committee for Electrotechnical Standardization, xrd test usually

EN 60695-11-10:2013/AC:2014 Fire hazard testing Part 10-2: Abnormal heat - Ball pressure test
EN 60695-10-2:2003 Fire hazard testing Part 10-2: Abnormal heat - Ball pressure test
EN 50333:2001 Audio@ Video and Similar Electronic Apparatus - Routine Electrical Safety Testing in Production
EN 50514:2008 Audio@ video and information technology equipment - Routine electrical safety testing in production

BE-NBN, xrd test usually

NBN 814-05-1970
NBN-ISO 7210:1992 Smoking machines for tobacco and tobacco products - Non-routine test methods

Japanese Industrial Standards Committee (JISC), xrd test usually

JIS C 60695-10-2:2008 Fire hazard testing -- Part 10-2: Abnormal heat -- Ball pressure test
JIS C 60695-10-2:2018 Fire hazard testing -- Part 10-2: Abnormal heat -- Ball pressure test method
JIS A 1423:2017 Simplified test method for normal emissivity by infrared radiation thermometer
JIS Z 2319:1991 Methods for magnetic leakage flux testing
JIS Z 2319:2018 Methods for magnetic flux leakage testing
JIS Z 4752-2-11:2005 Evaluation and routine testing in medical imaging departments -- Part 2-11: Constancy tests -- Equipment for general direct radiography

VE-FONDONORMA, xrd test usually

NORVEN 47-3-1963

Korean Agency for Technology and Standards (KATS), xrd test usually

KS B 0540-2014(2019) Industrial-process control valves — Inspection and routine testing
KS C IEC 60695-10-3:2020 Fire hazard testing — Part 10-3: Abnormal heat —Mould stress relief distortion test
KS C IEC 60695-10-3:2014 Fire hazard testing — Part 10-3: Abnormal heat — Mould stress relief distortion test
KS C IEC 61223-2-6:2017 Evaluation and routine testing in medical imaging departments — Part 2-6: Constancy tests — Imaging performance of computed tomography X-ray equipment
KS C IEC 61223-2-6:2005 Evaluation and routine testing in medical imaging departments－Part 2－6：Constancy tests－X-ray equipment for computed tomography
KS M ISO 3383-2002(2007) Rubber－General directions for achieving elevated or subnormal temperatures for test purposes
KS F 2299-1985(2000) STANDARD TEST METHOD FOR STEADY-STATE THERMAL PERFORMANCE OF BUILDING ASSEMBLIES BY MEANS OF GUARDED HOT BOX
KS K 0750-2006 Test method for the detection and assessment of photochromism
KS F 2299-1985 STANDARD TEST METHOD FOR STEADY-STATE THERMAL PERFORMANCE OF BUILDING ASSEMBLIES BY MEANS OF GUARDED HOT BOX
KS C IEC 61223-2-7-2003(2018) Evaluation and routine testing in medical imaging departments —Part 2-7: Constancy tests — Equipment for intra-oral dental radiography excluding dental panoramic equipment
KS C IEC 61298-2-2003(2008) Process measurement and control devices－General methods and procedures for evaluating performance－Part 2：Tests under reference conditions
KS C IEC 61223-2-11:2005 Evaluation and routine testing in medical imaging departments-Part 2-11:Constancy tests-Equipment for general direct radiography
KS C IEC 60534-4-2015(2020) Industrial-process control valves — Part 4: Inspection and routine testing
KS H ISO 7210:2019 Routine analytical cigarette-smoking machine — Additional test methods for machine verification
KS C 2117-1996(2021) Testing method for complex dielectric constant of nonmetallic magnetic materials at high frequencies
KS C IEC 61223-2-4:2005 Evaluation and routine testing in medical imaging departments-Part 2-4:Constancy tests-Hard copy cameras
KS C IEC 61223-2-5:2013 Evaluation and routine testing in medical imaging departments－Part 2－5：Constancy tests－Image display devices
KS C IEC 61223-2-4:2013 Evaluation and routine testing in medical imaging departments－Part 2－4：Constancy tests－Hard copy cameras
KS C IEC 61223-2-1:2005 Evaluation and routine testing in medical imaging departments－Part 2－1：Constancy tests－Film processors
KS C 2117-1996(2016) Testing method for complex dielectric constant of nonmetallic magnetic materials at high frequencies
KS C IEC TR 61948-1:2018 Nuclear medicine instrumentation — Routine tests — Part 1: Gamma radiation counting system
KS B ISO 13653:2006 Optics and optical instruments-General optical test methods-Measurement of relative irradiance in the image field
KS D ISO 10062:2019 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
KS B 4910-2014(2020) General rules for testing of printing machines
KS M ISO 787-5:2007 General methods of test for pigments and extenders－Part 5：Determination of oil absorption value
KS I ISO 13641-1:2008 Water quality-Determination of inhibition of gas production of anaerobic bacteria-Part 1:General test
KS M ISO 3383:2011 Rubber－General directions for achieving elevated or subnormal temperatures for test purposes
KS M ISO 787-2:2007 General methods of test for pigments and extenders－Part 2：Determination of matter volatile at 105 degree C
KS C IEC 61298-1:2003 Process measurement and control devices-General methods and procedures for evaluating performance-Part 1:General considerations
KS D ISO 10070:2004 Metallic powders－Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions
KS C IEC 61223-2-11:2013 Evaluation and routine testing in medical imaging departments－Part 2－11：Constancy tests－Equipment for general direct radiography
KS C IEC 61298-1:2013 Process measurement and control devices－General methods and procedures for evaluating performance－Part 1：General considerations
KS C IEC 60811-301:2016 Electric and optical fibre cables — Test methods for non-metallic materials — Part 301: Electrical tests — Measurement of the permittivity at 23℃ of filling compounds
KS M ISO 787-10:2007 General methods of test for pigments and extenders－Part 10：Determination of density－Pyknometer method
KS M ISO 787-9:2007 General methods of test for pigments and extenders－Part 9：Determination of pH value of an aqueous suspension

HU-MSZT, xrd test usually

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, xrd test usually

GB/T 35533-2017 General technical requirement for chromosomal abnormality detection microarray
GB/T 35507-2017 General rule for biochemical reagents

European Committee for Electrotechnical Standardization（CENELEC）, xrd test usually

EN 60695-10-2:2014 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
EN 62911:2016 Audio@ video and information technology equipment - Routine electrical safety testing in production

AENOR, xrd test usually

UNE-EN 60695-10-2:2014 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
UNE-EN 13755:2008 Natural stone test methods - Determination of water absorption at atmospheric pressure
UNE-EN 60695-10-3:2002 Fire hazard testing -- Part 10-3: Abnormal heat - Mould stress relief distortion test.
UNE-ISO 7210:2015 Routine analytical cigarette-smoking machine. Additional test methods for machine verification
UNE-EN 61223-2-4:1996 EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS. PART 2-4: CONSTANCY TESTS. HARD COPY CAMERAS.
UNE-EN 61223-2-5:1996 EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS. PART 2-5: CONSTANCY TESTS. IMAGE DISPLAY DEVICES.
UNE 40261-1:1975 METHOD TO CONTROL AND DETERMINE THE STRENGTH OF WOOL FABRICS AGAINST THE ATTACK OF MOTH COMMONLY TINEOLA BISSELHIELLA.
UNE-EN 61223-3-4:2002 Evaluation and routine testing in medical imaging departments -- Part 3-4: Acceptance tests - Imaging performance of dental X-ray equipment.
UNE 40152:1984 METHOD OF TEST FOR THE MEASURE OF LIBRE LENGTH BY INDIVIDUAL FIBRES TESTING

未注明发布机构, xrd test usually

GJB 38.48B-2020 Conventional Submarine Mooring and Navigation Test Procedures Part 48: Ventilation System Test
GJB 38.42B-2020 Conventional Submarine Mooring and Navigation Test Procedures Part 42: Inboard Communication System Test
BS 1881-111:1983(1998) Testing concrete — Part 111 : Method of normal curing of test specimens (20 °C method)
DIN EN 20139:1992 Textiles – Normal climates for sample preparation and testing EN 20 139
GJB 38.8B-2020 Conventional Submarine Mooring and Navigation Test Procedures Part 8: Structure Noise Test
GJB 38.9B-2020 Conventional Submarine Mooring and Navigation Test Procedures Part 9: Radiated Noise Test
GJB 38.12B-2020 Conventional Submarine Mooring and Navigation Test Procedures Part 12: Acoustic Target Strength Test
GJB 38.29B-2020 Conventional Submarine Mooring and Navigation Test Procedures Part 29: Insulation Monitoring Device Test
BS ISO 20902-1:2018(2022) Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries Part 1 : General requirements
DIN EN 13755 Berichtigung 1:2004 Test method for natural stone – determination of water absorption under atmospheric pressure; German version EN 13755:2001
BS EN 50333:2001 Audio, video and similar electronic apparatus — Routine electrical safety testing in production
GJB 38.44B-2020 Conventional Submarine Mooring and Navigation Test Procedures Part 44: Cabin Atmospheric Environment Monitoring Subsystem Test
DIN EN ISO 139:2005 Textiles – Normal climates for sample preparation and testing (ISO 139:2005); German version EN ISO 139:2005

Taiwan Provincial Standard of the People's Republic of China, xrd test usually

CNS 8564-1982 Simulated Mountain Fade Test Procedure - Dynamometer
CNS 7396-1981 Method of Test for Dielectric Constant and Dissipation Factor of Polyethylene by Liquid Displacement Procedure
CNS 7634-1981 Method of Test for Complex Dielectric Constant of Noumetallic Magnetic Materials at Microwave Fequencies

IT-UNI, xrd test usually

European Committee for Standardization (CEN), xrd test usually

prEN 4862-2021 Rotorcraft - Constant Wear Lifejackets - Requirements, testing and marking
EN 932-5:2012 Tests for general properties of aggregates - Part 5: Common equipment and calibration (Incorporating corrigendum May 2014)
CEN/TR 17538:2020 Furniture - Common test equipment - Test foams and mattresses
EN ISO 6988:1994 Metallic and Other Non Organic Coatings - Sulfur Dioxide Test with General Condensation of Moisture (ISO 6988 : 1985)

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, xrd test usually

JEDEC JESD5-1982 Mesurement of Temperature Coefficient of Voltage Regulator Diodes
JEDEC JESD224-2013 Universal Flash Storage (UFS) Test

(U.S.) Telecommunications Industries Association , xrd test usually

TIA TSB-102.CBBE-2011 Project 25 Recommended Compliance Assessment Tests - Conventional Operation
TIA-102.CBBE-2011 Project 25 Recommended Compliance Assessment Tests - Conventional Operation
TIA-102.CABA-2010 Project 25 Interoperability Testing for Voice Operation in Conventional Systems
TIA TSB-102.CABA-2002 Telecommunications Systems Bulletin Project 25 Interoperability Test Procedures Conventional Voice Equipment

American National Standards Institute （ANSI), xrd test usually

ANSI/AAMI ST 72-2002 Bacterial endotoxins - Test methodologies,routine monitoring,and alternatives to batch testing
ANSI/ASTM D150:2018 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
ANSI/ASTM B84:2001 Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
ANSI/AAMI ST72-2002 Bacterial endotoxin - Test methodologies, routine monitoring and alternatives to batch testing
ANSI/ASTM B114:2001 Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
ANSI/ASTM A893:1997 Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
ANSI/ASHRAE 52.2-1999 Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size
ANSI/ASHRAE 52.2a-2006 Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size
BS EN 4862:2023 Aerospace series. Rotorcraft constant wear lifejackets. Requirements, testing and marking (British Standard)
ANSI/EIA 364-85:1996 TP-85, General Test Procedure for Assessing Wear and Mechanical Damage Testing of Contact Finishes for Electrical Connectors

IN-BIS, xrd test usually

IS 13621-1993 Determination of dielectric constant of wood under microwave frequencies. Method of test
IS 9273 Pt.2-1979
IS 13984 Pt.2/Sec.3-1994

AT-ON, xrd test usually

ONORM M 7443 Teil.3-1989 Gas appliances with atmospheric burners; requirements, marking, testing, fest tables and test pressures
ONORM E 1373-1971 Apparalus for lesling the breaking capacily and normal Operation of connectors and plugs.
ONORM C 9436-1994 Testing of elastomers - Determination of compression set under constant deflection at normal temperature, at higher and low temperatures
ONORM M 7443 Teil.2-1989 Gas appliances with atmospheric burners; gas families, appliance categories and fest gases

Professional Standard - Chemical Industry, xrd test usually

HG/T 3500-2011 Chemical reagent.Test method for polarity constant of liquid stationary phase in gas chromatography
HG/T 3500-1982 Method for Determination of Polarity Constant of Chemical Reagent Gas Chromatography Stationary Liquid

ES-UNE, xrd test usually

UNE-EN ISO 8437-1:2021 Snow throwers - Safety requirements and test procedures - Part 1: Terminology and common tests (ISO 8437-1:2019)
UNE-EN 60695-10-3:2017 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
UNE-EN 12350-1:2020 Testing fresh concrete - Part 1: Sampling and common apparatus
UNE-EN 4862:2023 Aerospace series - Rotorcraft constant wear lifejackets - Requirements, testing and marking (Endorsed by Asociación Española de Normalización in June of 2023.)
UNE-EN 62911:2016 Audio, video and information technology equipment - Routine electrical safety testing in production (Endorsed by AENOR in May of 2016.)
UNE-EN ISO 642:2000 ERRATUM:2011 Steel. Hardenability test by end quenching (Jominy test) (ISO 642:1999)

Society of Automotive Engineers (SAE), xrd test usually

SAE J3013-2012 Friction Material Elastic Constants Determination through FRF Measurements and Optimization

SAE - SAE International, xrd test usually

SAE J3013-2019 Friction Material Elastic Constants Determination through FRF Measurements and Optimization

TIA - Telecommunications Industry Association, xrd test usually

TSB-102.CBBE-2011 Project 25 Recommended Compliance Assessment Tests - Conventional Operation
TSB-102.CABA-2002 Project 25 Interoperability Test Procedures Conventional Voice Equipment
TSB-102.CBBA-2009 Project 25 Recommended Compliance Assessment Tests – Transceiver Performance – C onventional Mode Subscriber

Lithuanian Standards Office , xrd test usually

LST EN 13755-2008 Natural stone test methods - Determination of water absorption at atmospheric pressure
LST EN 60695-10-2-2004 Fire hazard testing. Part 10-2: Abnormal heat. Ball pressure test (IEC 60695-10-2:2003)
LST EN 60695-10-3-2003 Fire hazard testing. Part 10-3: Abnormal heat. Mould stress relief distortion test (IEC 60695-10-3:2002)

Institute of Electrical and Electronics Engineers (IEEE), xrd test usually

IEEE Std C57.138-1998 IEEE Recommended Practice for Routine Impulse Test for Distribution Transformers
IEEE Std C57.138-2016 IEEE Recommended Practice for Routine Impulse Tests for Distribution Transformers
IEEE PC57.138/D3, January 2016 IEEE Draft Recommended Practice for Routine Impulse Test for Distribution Transformers
IEEE PC57.138/D4, April 2016 IEEE Approved Draft Recommended Practice for Routine Impulse Test for Distribution Transformers
IEEE 416-1984 ATLAS test language

RU-GOST R, xrd test usually

GOST R 51306-1999 Everyday services. Sewing and repair of clothes made to measure. General specifications
GOST R 51308-1999 Everyday services. Sewing and repair of headgear made to measure. General specifications
GOST R IEC 61223-2-11-2001 Evaluation and routine testing in medical imaging departments. Part 2-11. Constancy tests. Equipment for general direct radiography
GOST 24754-2013 Mining electrical equipment of normal production. General technical requirements and test methods
GOST R 51307-1999 Everyday services. Sewing and repair of knitted wear made to measure. General specifications
GOST 12175-1990 Common test methods insulating and sheathing materials of electric cables. Methods for determining the density. Water absorption and shrinkage tests
GOST R 57971-2017 Ceramic composites. Determination of tensile strength at the hoop tension at normal temperature on cylindrical samples with elastomeric inserts
GOST R 57922-2017 Ceramic composites. Test method for determination of mechanical characteristics under monotonic uniaxial tension at normal temperature

IPC - Association Connecting Electronics Industries, xrd test usually

IPC TM-650 2.5.5.5C-1998 Stripline Test for Permittivity and Loss Tangent (Dielectric Constant and Dissipation Factor) at X-Band
IPC TM-650 2.5.5.5B-1995 Stripline Test for Permittivity and Loss Tangent (Dielectric Constant and Dissipation Factor) at X-Band
IPC TM-650 5.5.4.17-1998 Via Test
IPC TM-650 5.5.4.15-1998 Test Pattern - Via Fill

KR-KS, xrd test usually

KS C IEC 60695-10-3-2020 Fire hazard testing — Part 10-3: Abnormal heat —Mould stress relief distortion test
KS C IEC 61223-2-6-2017 Evaluation and routine testing in medical imaging departments — Part 2-6: Constancy tests — Imaging performance of computed tomography X-ray equipment
KS H ISO 7210-2019 Routine analytical cigarette-smoking machine — Additional test methods for machine verification
KS R ISO 4210-3-2017 Cycles - Safety requirements for bicycles - Part 3: Common test methods
KS C IEC TR 61948-1-2018 Nuclear medicine instrumentation — Routine tests — Part 1: Gamma radiation counting system
KS D ISO 10062-2019 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
KS C IEC 60811-301-2016 Electric and optical fibre cables — Test methods for non-metallic materials — Part 301: Electrical tests — Measurement of the permittivity at 23℃ of filling compounds

PL-PKN, xrd test usually

PN E04410-22-1986 Electroinsulating varnishes Test methods Testing of dissipation factor and permittivity
PN K91046-1971 Normal gauge ra.lway rolling stock Wheel sets axles of traction vehicles Re?uirements and testings
PN E04160 ArkusZ77-1973 Elec?ric cables Me?hods of ?es?ing Capaci?ance felecommunication cables test
PN G04161-1970 Fans for mines Methods of test

CZ-CSN, xrd test usually

CSN 64 1501-1989 Plastics. Phenolic resins. General common regulations. Methods of test.
CSN 91 0270-1987 Furniture. Testing the furniture surface finish. Basic and common regulations
CSN 72 5041-1973 Testing oí fired ceramic materials. Determination of the permitivity and dielectric dissipation factor
CSN 66 8506-1955
CSN 46 1011-12-2005 Testing of cereals, pulses and oílseeds - Part 12: Testing of cereals - Malting barley grading - Routine method
CSN 67 0535-2-1994 Inorganic pigments. Determination of optical constants of coloured pigments. Part 2: "Multipoint" test method
CSN 34 5688-1980 Electrical and electronical equipment.Resistance test against environmental effects.Humid heat test-constant.
CSN 80 0209-1989 Man-made f ibres. Polypropylene staple fibre. Basic common regulations and testing methods
CSN 11 9008-1982 Hydrostatic Devices General Testing
CSN 72 2601-1978 Testing of brick products. Common regulations

Cooling Technology Institute, xrd test usually

CTI STD-202-2001 Standard for Publication of Custom Cooling Tower Thermal Performance Test Results

Group Standards of the People's Republic of China, xrd test usually

T/CSTM 00313-2021 Testing method of optical constants for 0ptical thin films based on spectro-photo-metric method
T/SXCAA 015-2021 Guidelines for the Storage and Management of Commonly Used Chemical Reagents in Inspection and Testing Institutions
T/GRM 058-2023 Specification for conventional triaxial rock mechanics test in deep stress relieving engineering
T/SDAA 008-2021 Technical rules for preparation of test samples and determination of general composition in forage—Part 2: Determination of moisture
T/SDAA 007-2021 Forage grass sample preparation and technical regulations for routine component testing Part 1: Sample preparation
T/CSTM 00986-2023 Test method for the complex permittivity of high-frequency dielectric substrates －Balanced-type circular disk resonator method
T/CSTM 00985-2023 Test method for the complex permittivity of low-loss dielectric plates－Split-cylinder resonator method
T/CWIA 1006-2019 General testing fluid for marking pens
T/CSTM 00990-2023 Test method for dielectric constant and dielectric loss tangent in millimeter wave frequency range — Quasi-optical cavity method
T/ZSA 60-2018 AVS interconnection and interworking test specification
T/AI 102-2018 AVS interconnection and interworking test specification

ES-AENOR, xrd test usually

ECMA - European Association for Standardizing Information and Communication Systems, xrd test usually

ECMA 166-1992 Information Technology Equipment - Routine Electrical Safety Testing in Production

API - American Petroleum Institute, xrd test usually

API RP 10B-4-2015 Preparation and Testing of Foamed Cement Formulations at Atmospheric Pressure (Second Edition)

CEN - European Committee for Standardization, xrd test usually

PREN 12350-1-2017 Testing fresh concrete - Part 1: Sampling and common apparatus

American Petroleum Institute (API), xrd test usually

API RP 10B-4-2015(2019) Preparation and Testing of Foamed Cement Formulations at Atmospheric Pressure (Second Edition)

Professional Standard - Electron, xrd test usually

SJ/T 11469-2014 Test methods for the piezoelectric properties of ceramics shear piezoelectric strain constant d<下标15> testing on quasi-static principle
SJ/T 10143-1991 Detail specification for electronic components--Semiconductor integrated circuits--CT54LS112/CT74LS112 dual J-K negative-edge flip-flop
SJ/T 11043-1996 Test method for high frequency dielectric losses and permittivity of electronic glass
SJ 20512-1995 Test methods for permittivity and permeability of microwave high loss solid materials
SJ/T 10142-1991 Detail specification for electronic components--Semiconductor integrated circuits--CT54LS00/CT74LS00 Quad 2-input positive-NAND gate
SJ/T 11386-2008 General specification of earth coninuity tester
SJ/T 11384-2008 General specification of withstanding voltage tester

NZ-SNZ, xrd test usually

AS/NZS 60695.10.2:2004 Fire Hazard Testing - Part 10.2: Abnormal heat - Ball pressure test (Incorporating Amendment 1: 04/2006;:1997)
AS/NZS 3629.2:1995 Methods of Testing Child Restraints Method 2: Determination of Hazardous Throat Contact in Abnormal Situations

SG-SPRING SG, xrd test usually

SS 78 Pt.A11-1987 Testing Concrete Part A11 : Method Of Normal Curing Of Test Specimens (27 ℃ Method)

Institute of Interconnecting and Packaging Electronic Circuits (IPC), xrd test usually

IPC TM-650 2.5.5.5-1998 Stripline Test for Permittivity and Loss Tangent (Dielectric Constant and Dissipation Factor) at X-Band Revision C
IPC TM-650 2.5.5.5.1-1998 Stripline Test for Complex Relative Permittivity of Circuit Board Materials to 14 GHz
IPC TM-650 2.5.5.10-2005 High Frequency Testing to Determine Permittivity and Loss Tangent of Embedded Passive Materials
IPC TM-650 2.5.32-1987 Resistance Test, Plated Through Holes

Standard Association of Australia （SAA）, xrd test usually

AS 1289.4.1.1:1997 Methods of testing soils for engineering purposes - Soil chemical tests - Determination of the organic matter content of a soil - Normal method
AS 3706.9:2012
AS 1289.4.1.1:2019 Methods of testing soils for engineering purposes, Method 4.1.1: Soil chemical tests — Determination of the organic matter content of a soil — Normal method
AS 3706.9:2001 Geotextiles - Methods of test - Determination of permittivity, permeability and flow rate
AS/NZS 1301.404s:1998 Methods of test for pulp and paper - Tensile strength of paper and board (constant rate of loading method)
AS/NZS IEC 61223.3.2:2022 Evaluation and routine testing in medical imaging departments, Part 3.2: Acceptance tests — Imaging performance of mammographic X-ray equipment
AS 1289.4.2.1:1997 Methods of testing soils for engineering purposes - Soil chemical tests - Determination of the sulfate content of a natural soil and the sulfate content of the groundwater - Normal method

The American Road & Transportation Builders Association, xrd test usually

AASHTO T 215-1970 Standard Method of Test for Permeability of Granular Soils (Constant Head)

Indonesia Standards, xrd test usually

SNI IEC/TR 61948-1:2014
SNI 19-1862-1990 Ultrasonic testing method with normal probe using direct contact method

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, xrd test usually

ITU-T J.65-1978 STANDARD TEST SIGNAL FOR CONVENTIONAL LOADING OF A TELEVISION CHANNEL (Study Group CMTT)

VN-TCVN, xrd test usually

TCVN 6530-11-2007 Refractories.Method of test.Part 11: Determination of abrasion resistance at room temperature

Professional Standard - Post and Telecommunication, xrd test usually

YD/T 4246-2023 Technical Requirements and Test Methods for Abnormal Behavior Monitoring of Telecommunication Network and Internet Data
YD/T 1805-2008 Test Method for Assistant Testing System Used for Intetworking between Networks
YD/T 2766-2014 The test specification for rich communication(suite)service
YD/T 552-1992 Test method of continuity attenuation distortion in communication network

International Organization for Standardization (ISO), xrd test usually

ISO 11775:2015 Surface chemical analysis - Scanning-probe microscopy - Determination of cantilever normal spring constants
ISO 13653:1996 Optics and optical instruments - General optical test methods - Measurement of relative irradiance in the image field
ISO 6988:1985 Metallic and other non organic coatings; Sulfur dioxide test with general condensation of moisture
ISO 10059-2:2003 Dense, shaped refractory products - Determination of cold compressive strength - Part 2: Test with packing
ISO/IEC 10373-1:1998 Identification cards - Test methods - Part 1: General characteristics tests

CU-NC, xrd test usually

NC 54-305-1985 Construction Materials and Products, Fire-Clay and SemiAcid Refractories for Common Purposes, Testing Methods
NC 12-04-43-1987 Standards System for Protection Aaainst Corrosion. Electrotechnical Devices. Accelerated Test for Constant Humid Heat

NL-NEN, xrd test usually

NEN 3758-1980 Cheese - Physical and chemical test methods - Determination of the fat content (routine method)

GB-REG, xrd test usually

REG NASA-LLIS-1212-1998 Lessons Learned ?Contingency Planning for Control of Test Hardware During Anomalous Episodes

Professional Standard - Earthquake, xrd test usually

DB/T 21-2007 Technical requirements of instruments in network for earthquake monitoring.The description of common technical parmneter and test method

IFI/FASTNR - Industrial Fastener Institute, xrd test usually

524-1996 Test Procedure for the Performance of Metric Nonmetallic Resistant Element Prevailing-Torque Screws

农业农村部, xrd test usually

NY/T 1860.30-2016 Test Guidelines for Determination of Physicochemical Properties of Pesticides Part 30: Dissociation Constants in Water

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), xrd test usually

ASHRAE 52.2 INT 5-2007 Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size
ASHRAE 52.2 ERTA-2009 Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size
ASHRAE 52.2 ERTA-2010 Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size
ASHRAE 52.2-2017 Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size

International Federation of Trucks and Engines, xrd test usually

NAVISTAR TMS 9525-2009 Vent Window Leakage Test

Business and Institutional Furniture Manufacturers Association （BIFMA), xrd test usually

BIFMA X5.1-2002 General-Purpose Office Chairs - Tests
BIFMA X5.1-2011 General-Purpose Office Chairs - Tests
BIFMA X5.11-2015 General-Purposr Large Occupant Office Chairs - Tests

Defense Logistics Agency, xrd test usually

DLA MS90384 REV D VALID NOTICE 4-2006 CABLE ASSEMBLIES, ELECTRIC POWER, PERMANENTLY WIRED, FOR PORTABLE GROUND SUPPORT TEST EQUIPMENT
DLA MS90384 REV D NOTICE 3-2000 CABLE ASSEMBLIES, ELECTRIC POWER, PERMANENTLY WIRED, FOR PORTABLE GROUND SUPPORT TEST EQUIPMENT [Refer To: DLA A-A-55812 VALID NOTICE 1, DLA A-A-55812, DLA A-A-55812 VALID NOTICE 2]
DLA MS90384 REV D VALID NOTICE 1-1991 CABLE ASSEMBLIES, ELECTRIC POWER, PERMANENTLY WIRED, FOR PORTABLE GROUND SUPPORT TEST EQUIPMENT [Refer To: DLA A-A-55812 VALID NOTICE 1, DLA A-A-55812, DLA A-A-55812 VALID NOTICE 2]
DLA MS90384 REV D-1979 CABLE ASSEMBLIES, ELECTRIC POWER, PERMANENTLY WIRED, FOR PORTABLE GROUND SUPPORT TEST EQUIPMENT [Refer To: DLA A-A-55812 VALID NOTICE 1, DLA A-A-55812, DLA A-A-55812 VALID NOTICE 2]

GOSTR, xrd test usually

GOST R IEC 62911-2018 Audio, video and information technology equipment. Routine electrical safety testing in production

SE-SIS, xrd test usually

SIS SS-ISO 1708:1986 Test conditions for general purpose parallel lathes-Testing of the accuracy

Electronic Components, Assemblies and Materials Association, xrd test usually

ECA 364-85-1996 TP-85 General Test Procedure for Assessing Wear and Mechanical Damage Testing of Contact Finishes for Electrical Connectors

US-FCR, xrd test usually

FCR UFGS-23 08 01.00 20-2006 TESTING INDUSTRIAL VENTILATION SYSTEMS

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., xrd test usually

ASHRAE BN-97-6-4-1997 Memorial Tunnel Fire Ventilation Test Program: Test Plan and Test Operations
ASHRAE BN-97-9-1-1997 Memorial Tunnel Fire Ventilation Test Program: The Extraction Tests

TR-TSE, xrd test usually

TS 466-1967 DETERMINATION OF CLEAN WOOL CONTENT BY ?CORE? TESTING

National Metrological Verification Regulations of the People's Republic of China, xrd test usually

JJG 984-2004 Earth-Continuity Testers

ETSI - European Telecommunications Standards Institute, xrd test usually

TS 103 142-2013 CLOUD; Test Descriptions for Cloud Interoperability (V1.1.1)

GM Europe, xrd test usually

GME R-6-03-1-1998 Water Through Test, Ignition System

Jiangsu Provincial Standard of the People's Republic of China, xrd test usually

DB32/T 3883-2020 Cardiopulmonary exercise tester respiratory system general test specification

VDI - Verein Deutscher Ingenieure, xrd test usually

VDI 3254 BLATT 3-1972 NUMERISCH GESTEUERTE WERKZEUGMASCHINEN; GENAUIGKEITSANGABEN@ PRUEFEN DURCH PROBEWERKSTUECKE